LTT461BBWI - Washing machine LG - Free user manual and instructions

USER MANUAL LTT461BBWI LG

Please read this guide thoroughly before operating and keep it handy for reference at all times.

Models :LTT461BBWI

CONTENTS

INSTALLATION 2

FEATURE CHART 3

OPERATION 4\~5

Starting

Temperature Control

Ice Making

Defrosting

SUGGESTIONS ON FOOD STORAGE .... 5

CLEANING 6

GENERAL INFORMATION 6

IMPORTANT WARNINGS 7

REPOSITIONING THE DOOR HINGE(Option)..... 8\~9

BEFORE CALLING FOR SERVICE 10

SPECIFICATIONS 11

Cartoon illustration of a smiling rectangular box character with arms and legs, waving (no text or symbols)

THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE LATEST IN TECHNOLOGY.

WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE AND RELIABILITY.

BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY. IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.

INSTALLATION

1. Select a good location. Place your refrigerator where it is easy to use.
2. Avoid placing the unit near heat sources, direct sunlight or moisture.
3. To ensure proper air circulation around the fridge-freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the unit must be level. If required, adjust the leveling screw to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling screw can be turned easily by tipping the cabinet slightly. Turn the leveling screw clockwise to raise the unit, counterclockwise to lower it.
5. Clean your refrigerator thoroughly and wipe off all dust accumulated during shipping.

6. Install accessories such as ice tray, shelf, etc., in their proper places. They are packed together to prevent possible damage during shipment.

7. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet.

8. Prior to use, leave your refrigerator on for 2 or 3 hours. Check the flow of cold air on the evaporator to ensure proper cooling. Your refrigerator is now ready for use.
9. When you put in a power cord, please refer to the label situated on the back plate in order to classify the rating.
10. This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications.

FEATURES CHART

Evaporator Ice Tray Drip Tray Collects water during defrosting Thermostat Dial For controlling the temperature in the refrigerator. Shelves Crisper & Glass lid or P.V.C Bar (Optional) For fruits and vegetables. Magnetic Door Seal Door Rack Leveling Screw

OPERATIONS

STARTING

When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperature before filling it with fresh food.

If operation is interrupted, wait 5 minutes before restarting.

TEMPERATURE CONTROL

Your refrigerator has a control that let you regulate the temperature in the refrigerator.

Initially, set the control at 4.

For colder temperature, adjust the control to a higher number, and for warmer temperature, adjust the control to a lower number.

ICE MAKING

● To make ice cubes, fill the ice tray with water and place it on the evaporator.
● To remove ice cubes, hold the tray at its ends and twist gently.

To remove ice cubes easily, run water on the tray before twisting.

Illustration of hands using a handheld device to interact with a curved arrow (no text or symbols)

CAUTION: Connect to potable water supply only.

OPERATION

DEFROSTING

• It is necessary to regularly defrost your refrigerator in order to ensure efficient operation.
  The frost on the surface of the evaporator should not exceed a quarter of an inch (6mm) before defrosting.
  ●To defrost, turn the control to 0.
• Before you start the defrosting operation, remove food from the evaporator and put in the drip tray fully until it stops.
• When defrosting is completed, remove the drip tray, empty water, dry and put it back fully until it stops. Turn the control dial to a desired position.

CAUTION: Never use any sharp or metallic instruments to remove ice, frost, or ice trays from the evaporator.

SUGGESTIONS ON FOOD STORAGE

STORING FOOD

• Store fresh food in the refrigerator. How food is frozen and thawed is an important factor in maintaining its freshness and flavor.
• Do not store food which goes bad easily at low temperatures, such as bananas, pineapples, and melons.
• Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other food and lead to higher electric bills!
• When storing, cover food with vinyl wrap or store in a container with a lid. This prevents moisture from evaporating and helps food to keep its taste and nutrients.
• Do not open the door frequently. Opening the door lets warm air enter the refrigerator, causing temperatures to rise.
• Do not store bottles on the evaporator - they may break when frozen.
  ● Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped, and packed food should be wiped clean to prevent adjacent food from spoiling.

CLEANING

It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled food should be wiped up immediately, since it may acidify and stain plastic surfaces if allowed to settle.

Never use metallic scouring pads, brushes, coarse abrasive cleaners, or strong alkaline solutions on any surface.

Before you clean, however, remember that damp objects will stick or adhere to extremely cold surfaces. Do not touch frozen surfaces with wet or damp hands.

EXTERIOR - Use a lukewarm solution of mild soap or detergent to clean the durable finish of your refrigerator. Wipe with a clean, damp cloth and then dry.

For products with a stainless steel exterior, use a clean sponge or soft cloth and a mildDetergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a Soft cloth. Do not use appliance wax, bleach, or other products containing chlorine on stainless steel.

INTERIOR - Regular cleaning of the interior and interior parts is recommended. Disconnect the power supply, and remove food and shelves, trays, etc. Wash all compartments and shelves, trays etc. with a baking soda solution. Rinse and dry.

WARNING

Always remove the power cord from the wall outlet prior to cleaning in the vicinity of electrical parts. Wipe up excess moisture with a sponge or cloth to prevent water or liquid from getting into any electrical part and causing a electric shock. Do not use flammable or toxic cleaning liquids.

GENERAL INFORMATION

VACATION TIME

During average length vacations, you will probably find it best to leave the refrigerator in operation. When you plan to be away for an extended period, remove all food, disconnect the power cord, clean the interior thoroughly, and leave the door OPEN to prevent odor formation.

POWER FAILURE

Most power failures are corrected within an hour or two and will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off. During power failures of longer duration, place a block of dry ice on top of your frozen packages.

IF YOU MOVE

Remove or securely fasten down all loose items inside the refrigerator.

To avoid damaging the leveling screw(s), turn them all the way into the base.

ANTI-CONDENSATION PIPE

The outside wall of the refrigerator cabinet may sometimes get warm, especially just after installation. Don't be alarmed. This is due to the anti-condensation pipe, which pumps hot refrigerant to prevent "sweating" on the outer cabinet wall.

Anti-Condensation Pipe

LAMP REPLACEMENT(Option)

• Lamp specification: 240v/15w
• Replacement
• Unplug the power cord from the outlet.
• Remove refrigerator shelves.
• Remove the lamp by turning it counterclockwise as shown in the figure at right.
• Assemble in reverse order of disassembly.
• Replacement bulb must be the same specification as original.

IMPORTANT WARNINGS

DO NOT USE AN EXTENSION CORD

If possible, connect the refrigerator to its own individual electrical outlet to prevent it and other appliances or household lights from causing an overload that could cause a power outage.

POWER CORD REPLACEMENT

If the power cord of the refrigerator is damaged, it must be replaced by a repair shop appointed by the manufacturer, as special tools are required.

In the event of an electric short circuit, grounding(earthing) reduces the risk of electric shock by providing an escape wire for the electric current.

In order to prevent possible electric shock, this appliance must be grounded.

Improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded.

An empty refrigerator can be a dangerous attraction to children. Remove either gasket, latches, lid or the entire door from your unused appliance, or take some other action to make it harmless.

Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

This appliance must be grounded(earthed).

DON'T WAIT! DO IT NOW!

NEVER STORE EXPLOSIVES AND CHEMICALS

CAUTION

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

REPOSITIONING THE DOOR HINGE(Option)

Your refrigerator is designed with a reversible door so it may open from either the left or the right. It is best to reposition the door hinge as necessary at the outset since it is inconvenient to do so later.

To change the door hinge, please refer to the diagram below and proceed as follows.

Technical diagram of a refrigerator with labeled components and internal structure

1. Remove all loose fittings from inside the appliance.
2. Carefully lay the appliance on its back on the original packing (You will need assistance to achieve this). Take care not to damage the pipework by keeping it clear of the floor.
3. Unscrew and remove the Adjustable Foot (A).
4. Remove the Lower Hinge (D) by unscrewing the 2 Bolts (B).
5. Remove the Leg (H) by unscrewing the bolt attaching it (C).
6. Gently pull the door downwards to remove it.
7. Before refitting the door, swap the Hinge Cap (F) by prying it from its current location and repositioning it on the other side of the door. Care should be taken not to damage the adjacent surfaces when removing the Hinge Cap.

NOTE

Reversing the doors is not covered by the warranty.

REPOSITIONING THE DOOR HINGE(Option)

1. Unscrew the Upper Hinge pin (G) and screw it into the opposite side hole in the top of the cabinet.
2. Now secure the Lower Hinge (D) to the cabinet using the 2 Bolts (B).
3. Replace the Adjustable Foot (A), setting it at approximately 20 mm.
4. Carefully stand the appliance up, (you will need assistance to do this,) and position it in its permanent location.
5. Check that the door opens and closes easily. Ensure that the door seal does not bind on the hinge side creating gaps which would allow air into the interior. Adjust the hinges if necessary.

This appliance should be stood on a firm, level floor with sufficient space for free airflow around it. (At least 10 mm all round and, subject to location, 20 mm beneath the worksurface). Avoid positions close to walls or corners. There must be sufficient room for free ventilation, particularly at the back. The unit should be located away from direct heat sources, such as cookers, radiators, and direct sunlight. If the unit is positioned where the temperature is too low, condensation will form on the outside of the cabinet. Normal room temperature is recommended.

Avoid locations which may be affected by drafts or dampness, as this will impair the efficiency of the product.

BEFORE CALLING FOR SERVICE

SERVICE CALLS CAN OFTEN BE AVOIDED!

IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING PROPERLY, CHECK THESE POSSIBLE CAUSES FIRST :

PROBLEM POSSIBLE CAUSES
REFRIGERATOR DOES Has a house fuse blown or circuit breaker tripped?NOT OPERATE	Has the power cord plug been removed or loosened from the electrical wall outlet?
TEMPERATURE TOO WARM	Temperature control not set on proper position.Appliance is placed close to wall or heat source.Warm weather-frequent door openings.Door left open for a long time.Large amount of foods are kept in the refrigerator.
ABNORMAL NOISE(S)	Refrigerator is installed in a weak or uneven place or leveling screw needs adjusting.Unnecessary objects placed in the back side of the refrigerator.
REFRIGERATOR	Foods with strong odors should be tightly covered .depparw roRODO SAHInterior needs cleaning.
DEW FORMS ON THE CABINET SURFACE	Not unusual during periods of high humidity.Door may have been left ajar.

- You can find a product label and a circuit diagram at back of your appliance. Manufacturing year and month is first three digit of 'Serial No.' on the product label.

Example : Serial No.:

0

year

01

month

TR

China

TX

special

00001

serial

Model number	LTT461BBWI
Climate class	Tropical
Rated voltage	220 V
Rated frequency	60 Hz
Rated input	115 W
Electric power consumption	290.905 Kwh PER YEAR
Percentage running time	50%
Refrigerant	R134a, 115 g
Net weight	27 kg
Rated shelf area	0.66 m^2
Manufacturer (and/or trade mark)	LG Electronics Inc.
Country of origin	Made in China

دليل الملك

الثلاثة

Cartoon illustration of a smiling rectangular book character with arms and legs, waving (no text or symbols)

Illustration of hands using a handheld device to interact with a curved arrow (no text or symbols)

صنع الثالث

Technical line drawing of a refrigerator with internal components and labeled parts (no text or symbols present)