WW70K5210US - Washing machine SAMSUNG - Free user manual and instructions

USER MANUAL WW70K5210US SAMSUNG

WW80K5**** / WW70K5****

Abstract black-and-white image of a glowing, cloud-like shape with no visible text or symbols

©

Contents

Safety information 3

What you need to know about the safety instructions 3

Important safety symbols 3

Important safety precautions 4

Installation 13

What's included 13

Installation requirements 15

Step-by-step installation 17

Before you start 23

Initial settings 23

Laundry guidelines 23

Detergent drawer guidelines 26

Operations 29

Control panel 29

Simple steps to start 31

Cycle overview 32

Special features 35

Settings 37

Maintenance 38

Eco drum clean 38

Smart Check 39

Emergency drain 40

[NO TEXT]

Safety information

Congratulations on your new Samsung washing machine. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washing machines many features and benefits.

What you need to know about the safety instructions

Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance. Please store the manual in a safe location close to the appliance for future reference. Use this appliance only for its intended purpose as described in this instruction manual. Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution and care when installing, maintaining and operating your washing machine. Because the following operating instructions cover various models, the characteristics of your washing machine may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service centre or find help and information online at www.samsung.com.

Important safety symbols

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury, death and/or property damage.

Safety information

These warning signs are here to prevent injury to yourself and others. Please follow them explicitly.

After reading this manual, store it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarise yourself with its operation and exercise care when using it.

Important safety precautions

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:

1. This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

2. For use in Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities on body of experience and knowledge if they

3. Use the new hose-sets supplied with the appliance and do not reuse the old hose-sets.

4. For appliances with ventilation openings in the base, the carpet must not obstruct any openings.
5. For use in Europe: Children of less than 3 years should be kept away unless continuously supervised.

CAUTION

1. In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Critical installation warnings

WARNING

The installation of this appliance must be performed by a qualified technician or service company.

- Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury.

The appliance is heavy, therefore take care when lifting it.

Safety information

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

• Unplug the power plug and clean it with a dry cloth.
• Failure to do so may result in electric shock or fire.

Plug the power plug into the wall socket so that the cord is running towards the floor.

• If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.

Keep all packaging materials out of the reach of children as these may be dangerous.

• If a child places a bag over its head, it may suffocate.

When the appliance, power plug or power cord is damaged, contact your nearest service centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product.
- Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national regulations.
Do not install this appliance near a heater or any inflammable material.
Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight or water (rain drops).
Do not install this appliance in a location exposed to low temperatures.
- Frost may cause the tubes to burst.
Do not install this appliance in a location where gas may leak.
• This may result in electric shock or fire.

©

Do not pull the power cord when unplugging the power plug.

• Unplug the power plug by holding the plug.
• Failure to do so may result in electric shock or fire.

This appliance should be positioned so that the power plug, the water supply taps, and the drain pipes are accessible.

Installation cautions

CAUTION

This appliance should be positioned in such a way that the power plug is easily accessible.

• Failure to do so may result in electric shock or fire due to electric leakage.
  Install your appliance on a solid, level floor that can support its weight.
• Failure to do so may result in abnormal vibrations, movement, noise, or problems with the product.

Critical usage warnings

WARNING

If the appliance is flooded, turn off the water & power supplies immediately and contact your nearest service centre.

• Do not touch the power plug with wet hands.
• Failure to do so may result in electric shock.

Safety information

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other inflammable or explosive substances.

• This may result in electric shock, fire, or an explosion.

Do not open the washing machine door by force while it is operating (high-temperature washing/drying/spinning).

- Water flowing out of the washing machine may result in burns or cause the floor to be slippery. This may result in injury.

- Opening the door by force may result in damage to the product or injury.

Do not insert your hand under the washing machine while an operation is in progress.

• This may result in injury.

Do not touch the power plug with wet hands.

• This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

- Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.

Do not let children or the infirm use this washing machine without proper supervision. Do not let children climb in or onto the appliance.

• This may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washing machine while it is operating.

• This may result in injury.

Do not unplug the appliance by pulling the power cord. Always grip the plug firmly and pull it straight out of the outlet.

• Damage to the power cord may cause a short-circuit, fire and/or electric shock.

©

If any foreign substance enters into the appliance, unplug the power plug and contact you nearest Samsung Customer Service.

• This may result in electric shock or fire.

Do not let children (or pets) play in or on your washing machine. The washing machine door does not open easily from the inside and children may be seriously injured if trapped inside.

Usage cautions

CAUTION

When the washing machine is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washing machine using a damp, soft cloth.

- Failure to do so may result in discolouration, deformation, damage, or rust.

The front glass may be broken by a strong impact. Take care when using the washing machine.

• If the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the water tap slowly.

Open the water tap slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may damage a product part or result in a water leak.

If a draining error occurs during an operation, check if there is a draining problem.

Safety information

Open the water tap and check if the water supply hose connector is firmly tightened and that there is no water leak before using the product.

- If the screws on the water supply hose connector are loose, it may result in a water leak.

The product you have purchased is designed for domestic use only.

Using the product for business purposes qualifies as a product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.

Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, fire, problems with the product, or injury.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, this may result in electric shock, fire or problems with the product.

Do not place objects that generate electromagnetic fields near the washing machine.

• This may result in injury due to a malfunction.

Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water.

• This may result in burns or injury.

Do not wash, spin, or dry water proof seats, mats, or clothing (*) unless your appliance has a special cycle for washing these items.

(*): Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle and car covers, etc.

- Do not wash thick or hard mats even if the washing machine mark is on the care label.

©

©

Do not place any objects (such as shoes, food waste, animals) other than laundry into the washing machine.

- This may result in damage to the washing machine, or injury and death in the case of pets due to the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knives, fingernails, etc.

• This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

• This may cause the rubber seal to become deformed and result in a water leak.

Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long periods of time.

• This may cause the drum to rust.

- If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to the surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil.

Do not use water from water cooling/heating devices.

• This may result in problems with the washing machine.

Do not use natural hand-washing soap for the washing machine.

- If it hardens and accumulates inside the washing machine, it may result in problems with the product, discolouration, rust, or bad odours.

Glass seats and accessories in a washing pot and wash them with the other laundry.

中

Safety information

Take care that children's fingers are not caught in the door when you close it.

- Failure to do so may result in injury.

Critical cleaning warnings

WARNING

Do not clean the appliance by spraying water directly onto it.

Do not use the a strong acidic cleaning agent.

Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discolouration, deformation, damage, electric shock or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failure to do so may result in electric shock or fire.

Installation

Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry.

What's included

Make sure all the parts are included in the product package. If you have a problem with the washing machine or the parts, contact a local Samsung customer centre or the retailer.

Diagram of a washing machine with numbered parts for identification and assembly reference.

Installation
©

Installation

Spanner Bolt caps Hose guide Cold water hose Hot water hose Liquid detergent guide

Cap Fixer

NOTE

• Bolt caps: The provided number (3 to 6) of bolt caps depends on the model.
• Hot water hose: Applicable models only.
• Liquid detergent guide: Applicable models only.

Installation requirements

Electrical supply and grounding

• AC 220-240 V / 50 Hz fuse or circuit breaker is required
• Use an individual branch circuit specific to the washing machine
  To ensure proper grounding, the washing machine comes with a power cord featuring a three-prong grounding plug for use in a properly installed and grounded outlet. Check with a qualified electrician or serviceperson if you are not sure about the grounding.
  Do not modify the provided plug. If it does not fit the outlet, call a qualified electrician to install a proper outlet.

WARNING

• Do NOT use an extension cord.
• Use only the power cord that comes with the washing machine.
• Do NOT connect the ground wire to plastic plumbing, gas lines, or hot water pipes.
• Improperly connected grounding

Water supply

A proper water pressure for this washing machine is between 50 kPa and 800 kPa. Water pressure less than 50 kPa may cause the water valve not to close completely. Or, it may take longer to fill the drum, causing the washing machine to turn off. Water taps must be within 120 cm from the rear of the washing machine so that the provided inlet hoses reach the washing machine. To reduce the risk of leaks:

• Make sure water taps are easily accessible.
- Turn off the taps when the washing machine is not in use.
- Check for any leaks at the water inlet hose fittings on a regular basis.

CAUTION

Before using the washing machine for the first time, check all connections at the water valve and taps for any leaks.

Drain

Installation

Flooring

For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are not a good resistance to vibrations and may cause the washing machine to move slightly during the spin cycle.

CAUTION

Do NOT install the washing machine on a platform or a poorly supported structure.

Water temperature

Do not install the washing machine in areas where water may freeze as the washing machine always retains some water in its water valves, pumps, and/or hoses. Frozen water left in the connection parts may cause damage to belts, the pump, and other components of the washing machine.

Alcove or closet installation

Minimum clearance for stable operation:

Sides 25 mm Rear 50 mm
Top 25 mm Front 550 mm

If both the washing machine and a dryer are installed in the same location, the front of the alcove or closet must have at least a 550 mm unobstructed air opening. Your washing machine alone does not require a specific air opening.

©

Step-by-step installation

STEP 1 Select a location

Location requirements:

• Solid, level surface without carpeting or flooring that may obstruct ventilation
  • Away from direct sunlight
• Adequate room for ventilation and wiring
  • The ambient temperature is always higher than the freezing point (0 °C)
• Away from a heat source

STEP 2 Remove the shipping bolts

Hand holding a tool interacting with a spiral-shaped object on a contour background (no text or symbols)

Unpack the product package and remove all shipping bolts.

1. Loosen all shipping bolts on the rear of the machine using the supplied spanner.

2. Fill the holes with the supplied plastic bolt caps. Keep the shipping bolts for future use

Installation

STEP 3 Adjust the levelling feet

Illustration showing a hand using a tool to adjust a circular component, with no visible text or symbols.

1. Gently slide the washing machine into position. Excessive force may damage the levelling feet.
2. Level the washing machine by manually adjusting the levelling feet.
3. When levelling is complete, tighten the nuts using the spanner.

Line drawing of a hand using a tool to adjust or install a component (no text or symbols visible)

STEP 4 Connect the water hose

The provided hose adaptor may differ with the model. This step guides you through connecting the connector-type adaptor. If you are provided with the screw-type adaptor, go to 7.

Connect the water hose to the water tap.

1. Remove the adaptor (A) from the water hose (B).

Technical diagram of a mechanical valve or fitting with labeled ports and directional arrows indicating flow or movement.

Illustration of hands using a tool to adjust or install a mechanical component (no text or symbols visible)

Diagram showing hand holding a valve with directional arrows and labeled point E, alongside a close-up of the valve assembly.

1. Holde the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
2. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
3. Turn part (C) in the arrow direction to tighten it.
4. While holding down part (E), connect the water hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound.

中

Installation

Diagram showing two views of a faucet with directional arrows and close-ups of the valve (no text or symbols)

1. Connect the other end of the water hose to the inlet valve on the back of the washing machine. Turn the hose clockwise to tighten.
2. Open the water tap and check if there are any leaks around the connection areas. If there are water leaks, repeat the steps above.

WARNING

Stop using the washing machine if there is a water leak, and contact a local Samsung service centre. Otherwise, this may cause electric shock.

CAUTION

Diagram of two pipe fittings with a curved arrow indicating rotation (no text or symbols)

Aqua hose (applicable models only)

Technical line drawing of a mechanical component with labeled point A (no text or symbols beyond label)

For models with an additional hot water inlet:

1. Connect the red end of the hot water hose to the hot water inlet on the back of the machine.
2. Connect the other end of the hot water hose to the hot water tap.

The aqua hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak.

[NO TEXT]

Installation

STEP 5 Position the drain hose

The drain hose can be positioned in three ways:

Diagram of a toilet sink with labeled parts and an inset showing a curved structure labeled A

Over the edge of a wash basin

The drain hose must be placed at a height of between 60 cm and 90 cm (") from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage.

In a sink drain pipe

The drain pipe must be above the sink siphon so that the end of the hose is at least 60 cm above the floor.

Line drawing of a washing machine with a vertical pipe and dimension marker (no text or symbols)

In a drain pipe

The drain pipe should be between 60 cm and 90 cm high (*). It is advisable to use a 65 cm high vertical pipe. Make sure the drain hose is connected to the stand pipe at a slant.

Drain standpipe requirements:

• Minimum diameter of 5 cm
• Minimum carry-away capacity of

Before you start

Initial settings

Run Calibration (recommended)

Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration.

1. Power off, and then power on the washing machine.
2. Hold down Temp. and Delay End simultaneously for 3 seconds to enter Calibration mode. The "CB" message appears.
3. Press Start/Pause to run the Calibration cycle.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When the cycle is complete, "0" appears on the display and the washing machine will turn off automatically.
6. The washing machine is now ready for use.

Laundry guidelines

STEP 1 Sort

Sort the laundry according to these criteria:

• Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon.
• Colour: Separate whites from colours.
- Size: Mixing different-sized items together in the drum improves the washing

Before you start

STEP 2 Empty pockets

Empty all the pockets of your laundry items

- Metal objects such as coins, pins, and buckles on clothing may damage other laundry items as well as the drum.

Turn clothing with buttons and embroideries inside out

• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers should be closed and fixed with a string.
• Clothing with long strings may become entangled with other clothes. Make sure to tie the strings before starting the wash.

STEP 3 Use a laundry net

• Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres may break through and tear other laundry items.
• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become caught around the door. Place them inside a fine laundry net.
• Do not wash the laundry net by itself without other laundry. This may cause abnormal vibrations that could move the washing machine and result in injury.

STEP 4 Prewash (if necessary)

Select the Prewash option for the selected course if the laundry is heavily soiled. Do not use the Prewash option when detergent is manually added into the drum or if applying liquid detergent.

[NO TEXT]

STEP 6 Apply a proper detergent type

The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool), colour, wash temperature, and degree of soiling. Always use "low suds" laundry detergent, which is designed for automatic washing machines.

NOTE

• Follow the detergent manufacturer's recommendations based on the weight of the laundry, the degree of soiling, and the hardness of the water in your local area. If you are not sure about the water hardness, contact a local water authority.
• Do not use detergent that tends to be hardened or solidified. This detergent may remain after the rinse cycle, blocking the drain outlet.

CAUTION

When washing wool using the wool course, use only a neutral liquid detergent. If used with the Wool course, powder detergent may remain on the laundry and discolour the laundry.

Laundry capsules

To get the best results from using laundry capsules, please follow these instructions.

Simple line drawing of a washing machine with a bag attached to the side (no text or symbols)

1. Put the capsule in the bottom of the empty drum towards the rear.

Before you start

Detergent drawer guidelines

The washing machine provides a three-compartment dispenser: the left compartment for the main wash, the middle compartment for fabric softeners, and the right compartment for the preliminary wash.

A I II

01 Prewash compartment: Apply prewash detergent or starch.
02 II Main-wash compartment: Apply main-wash detergent, water softener, soaking detergent, bleach, and/or stain removers.
03 Softener compartment: Apply additives such as fabric softener. Do not exceed the max line (A).

CAUTION

• Do not open the detergent drawer while the washing machine is operating.

• Do not use the following types of detergent:

• Tablet or capsule types

• Ball or net types
• To prevent the compartment clogging, concentrated or highly-enriched agents (fabric softener or detergent) must be diluted with water before being applied.

Diagram showing a hand inserting a card into a folder, with an inset image labeled 'A' pointing to a device.

1. Apply fabric softener to the softener compartment. Do not exceed the max line (A).

Illustration of a hand holding a small object over a surface, with no visible text or symbols

1. If you want to prewash, apply prewash detergent to the ① prewash compartment as instructed or recommended by the manufacturer.
2. Close the detergent drawer.

Before you start

The image is too blurry to recognize any text content.

Before you start

To use liquid detergent (applicable models only)

Technical diagram showing a device with a highlighted component and labeled parts A and vMAXV

First insert the provided liquid container in the Ⅱ main-wash compartment. Then, apply liquid detergent to the container below the marked max line (A).

NOTE

• Insert the liquid detergent guide only after you remove the detergent drawer from the washing machine by pressing release lever (A).
  • After a wash, some liquid detergent may remain in the detergent drawer.

CAUTION

• Do not exceed the max line that is marked inside the container.
• Remove the liquid container if using powder detergent.

©

Operations

Control panel
WW80K54****

SUPER ECO WASH BEDDING DAILY WASH DELICATES BABY CARE OUTDOOR CARE DARK CARMENT ECON DRUM CLEAN COTTON COTTON SYNTHETICS WOOD SPIN RINSE+SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SPIN SUN TURS 3.0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 19:88 Delay End 12:55 14:45 16:35 18:25 19:15 21:05 22:95 24:85 26:75 28:65 29:55 31:45 33:35 35:25 37:15 39:05 41:95 43:85 45:75 47:65 49:55 51:45 53:35 55:25 57:15 59:05 61:95 63:85 65:75 67:65 69:55 71:45 73:35 75:25 77:15 79:05 81:95 83:85 85:75 87:65 89:55 91:45 93:35 95:25 97:15 99:05 11:95

WW70K52***

SUPER ECO WASH COTTON BEDDING SUNETHETICS SYNETHETICS BABY CARE RINSE+SPIN DARK GARMENT ECO DRUM CLEAN 01 02 19:08 Delay End 08 10 11 03 04 05 06 07 *OK! SKE! العربية : كيليله رسمحىم لامعىتى ئىلى ئىلى 19:08 95° 5 1200 60 4 1000 40 3 800 30 2 400 20 °C 1 °C Temp Rinse Spin Autres Ocotons Ruble Seal

01 Cycle Selector Turn the dial to select a cycle.
02 Display	The display shows current cycle information and estimated time remaining, or an information code when a problem occurs.

Operations

06 Options	Press to select an option from Intensive, Pre Wash, Press again to deselect. · Availability of the options depends on the cycle.
07 Bubble Soak	Press to activate/deactivate the Bubble Soak function. This function helps remove a wide variety of stubborn stains.
08 Delay End	Delay End lets you set the end time of the current cycle. Based on your settings, the start time of the cycle will be determined by the machine's internal logic. For example, this setting is useful for programming your machine to finish a wash at the time you normally return home from work. · Press to choose a preset unit of hours.
09 Quick Wash 15'/30'	For lightly soiled garments of less than 2 kg that you want to wash quickly. · This option is available only when the COTTON cycle is selected. · The cycle time is subject to change, depending on the detergent amount, water level, and contamination level of the load.
10 Power	Press to turn on/off the washing machine.
11 Start/Pause	Press to start or stop operation.

Simple steps to start

1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select a course.
3. Change the cycle settings (Temp., Rinse, and Spin) as necessary.
4. To add an option, press Options. Use the button again to choose a preferred item.
5. The machine provides two respective buttons for Bubble Soak and Delay End for easy access. If you want to use one of these options, press the corresponding button.
6. Press Start/Pause.

To change the cycle during operation

1. Press Start/Pause to stop operation.
2. Select a different cycle.
3. Press Start/Pause again to start the new cycle.

Operations

Operations

Cycle overview

Standard cycles

Cycle Description	Max load (kg)
	WW80K5....	WW70K5....
COTTON	For cottons, bed linens, table linens, underwear, towels, or shirts.The washing time and the rinse count are automatically adjusted according to the load.The energy label specifications have been determined by using the following program according to UAE S 5010 2:2013.The program is "Cotton 60 °C + Intensive".	Max
COTTON	Optimal performance with lower energy for cotton fabrics, bed linens, table linens, underwear, towels, or shirts. For energy saving, the actual washing temperature may be lower than specified	Max
SYNTHETICS	For blouses or shirts that are made of polyester (diolen, trevira), polyamide (perlon, nylon), or the	4

中

Cycle Description	Max load (kg)
	WW80K5......	WW70K5......
ECO DRUM CLEAN	• Cleans the drum by removing dirt and bacteria from the drum.• Perform once every 40 washes with no detergent or bleach applied.• Make sure the drum is empty.• Do not use any cleaning agents for cleaning the drum.	-
SUPER ECO WASH	• Low temperature ecobubble cycle helps reduce power consumption.	4
BEDDING	• For bed spreads, bed sheets, bedding covers, etc.• For best results, wash only 1 type of bedding and make sure the load weighs less than 2.0 kg.	2
DAILY WASH • For everyday items such as underwear and shirts. 4 4
DELICATES	• For sheer fabrics, bras, lingerie (silk), and other handwash-only fabrics.• For best performance, use liquid detergent.	2
BABY CARE	• Featuring a high-temperature wash and extra rinses to help remove the remaining detergent	4

Operations

Options

Option Description
	Intensive	For badly soiled laundry. The operation time for each cycle is longer than normal.
	Pre Wash	This will add a preliminary washing cycle before the main wash cycle.
	Bubble Soak	Bubble Soak helps remove a variety of stubborn stains.With Bubble Soak selected, laundry is thoroughly soaked in water bubbles for effective washing.Bubble Soak is available with and adds up to 30 minutes to 5 cycles: COTTON, SYNTHETICS, BEDDING, DAILY WASH. BABY CARE.

Delay End ⏻

You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1(60minutes) to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.

1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.

The corresponding indicator turns on with the clock running.

1. To cancel the Delay End, restart the washing machine by pressing Power.

Real-life case

You want to finish a two-hour course 3 hours later from now. For this, you add the Delay End

Special features

AddWash

When the AddWash indicator turns on, you can stop operation of the machine and put additional laundry or softener into the drum. The Add Door opens by more than 130° for easy access.

Line drawing of a hand placing a square button into a circular opening (no text or symbols)

1. Press Start/Pause to stop operation.
2. Press the upper area of the Add Door until you hear a clicking sound to unlock. Pull the handle of the Add Door to open.

Line drawing of a hand pressing a circular object on a wall (no text or symbols)

1. Open the Add Door and insert additional laundry or softener into the drum.
2. Push to lock the Add Door until you hear a clicking sound.
3. Press Start/Pause to resume operation.

NOTE

CAUTION

Do not put excessive force on the Add Door. It may break.

Operations

CAUTION

• Do not open the Add Door if suds have formed inside the drum that rise above the level of the Add Door.
• Do not attempt to open the Add Door while the machine is operating without first pressing Start/Pause. Please note that the Add Door can be opened unintentionally (without pressing Start/Pause) when the wash is complete.
• Do not add an excessive load through the Add Door. Performance may be degraded.
• Do not use the lower area of the Add Door as a handle. Your fingers may be caught.
  • Make sure that no laundry is caught in the Add Door.
• Keep your pets out of the washing machine, especially the Add Door.
• When using hot water for the wash, the Add Door seems to leak water after opening and closing the Add Door. This is normal, simply because steam emerging from the open Add Door has cooled and formed water drops on the surface.
• When the Add Door closes, the door seals up and no water can leak. However, you may encounter what appears to be water leak around the door - some residual water remaining around the Add Door may form water drops. This is normal.
• Neither the main door or the Add Door can opened when the water temperature is over 50 °C. If the water level inside the drum is over a certain point, the main door cannot be opened.
• If an information code of DDC appears on the display, see the "Information codes" section for further actions.

Settings

Child Lock

To prevent accidents by children, Child Lock locks all buttons except for Power.

- To set the Child Lock function, hold down Temp. and Rinse simultaneously for 3 seconds. To activate, press

Start/ Pause.

Sound On/Off

You can turn on or off the key. Your setting will remain effective after you restart the machine.

• To mute the sound, hold down Rinse and Spin simultaneously for 3 seconds.
• To unmute the sound, hold down again for 3 seconds.

NOTE

In the Child Lock state, you must first deactivate the Child Lock if you want to add detergent or laundry, or change the current settings.

To cancel the Child Lock

Press and hold Temp. and Rinse

simultaneously for 3 seconds.

Maintenance

Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle.

Eco drum clean

Perform this cycle regularly to clean the drum and to remove bacteria from it.

1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select ECO DRUM CLEAN.
3. Press Start/Pause.

NOTE

The water temperature for ECO DRUM CLEAN is set to 70 °C, which cannot be changed. Due to the features of the washing machine, the water temperature is set to 70 °C during the Eco Drum Clean cycle, but the display can only show 60 °C on the control panel.

CAUTION

Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum deteriorates the washing performance.

Smart Check

To enable this function, you must first download the Samsung Smart Washer app at the Play Store or the App Store, and install it on a mobile device featuring a camera function.

The Smart Check function has been optimized for Galaxy & iPhone series (applicable models only).

1. Press and hold the Spin and Options buttons simultaneously for 3 seconds to enter the Smart Check mode.
2. The washing machine starts the self-diagnosis procedure and display an information code if a problem is detected.
3. Run the Samsung Smart Washer app on your mobile device, and tap Smart Check.
4. Put the mobile device close to the washing machine's display so that the mobile device and the washing machine face each other. Then, the information code will be recognized automatically by the app.
5. When the information code is recognized correctly, the app provides detailed information about the problem with applicable counteractions.

NOTE

• Smart Check mode will be disabled once you press a button or control after the machine powers on.
  • The function name, Smart Check, may differ depending on the language.
• If there is strong reflected light on the washing machine display, the app may fail to recognize the information code.
• If the app fails to recognize the Smart Check code consecutively, enter the information code manually onto the app screen.

Maintenan

Maintenance

Emergency drain

In case of a power failure, drain the water inside the drum before taking out the laundry.

Hand inserting a key into a device (no text or symbols visible)

1. Power off and unplug the washing machine from the electrical outlet.
2. Gently press the top area of the filte cover (A) to open.

Diagram showing a hand operating a mechanical device with labeled component B and directional arrow

1. Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while holding the tube cap (B).

1. Open the tube cap and let water in the Emergency drain tube (C) flow into the

Cleaning

Surface of the washing machine

Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine.

Add Door

Hand placing a brown object into a circular container (no text or symbols visible)

1. Open the Add Door.

2. Use a wet cloth to clean the Add Door.

3. Do not use cleaning agents.
   Discolouration may occur

4. Use caution when cleaning the rubber packing and the locking mechanism (A).

5. Dust off the window area regularly.

6. Wipe up and close the Add Door until you hear a clicking sound.

CAUTION

• Do not apply force on the Add Door. It may break.
• Do not leave the Add Door open while the machine is operating.
• Do not put heavy objects on the Add Door at any time.
  • To prevent physical injury, do not touch the Add Door while the drum is rotating.
• Do not open the Add Door while the machine is operating. This may cause physical injury.
• Do not manipulate the feature panel while the Add Door is open. This may cause physical injury or system failure

Maintenan

Maintenance

Mesh filter

Clean the mesh filter of the water hose once or twice a year.

Diagram of a car fuel nozzle with a valve mechanism (no text or symbols)

Illustration of a hand using a tool to adjust a component with a magnified inset showing internal structure (no text or symbols)

1. Turn off the washing machine, and unplug the power cord.
2. Close the water tap.

3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to prevent water from gushing out.

4. Use pliers to pull out the mesh filter from the inlet valve.

5. Submerge the mesh filter deeply in water so that the threaded connector is also submerged.
6. Dry the mesh filter completely in the shade.
7. Reinsert the mesh filter into the inlet valve, and reconnect the water hose to the inlet valve.
8. Open the water tap.

NOTE

If the mesh filter is cloned, an information code of "AC" appears on the screen.

Pump filter

It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A clogged pump filter may reduce the bubble effect.

Hand inserting a plug into a socket (no text or symbols visible)

1. Turn off the washing machine, and unplug the power cord.
2. Drain the remaining water inside the drum drum. See the "Emergency drain" section.
3. Gently press the top area of the filter cover to open.
4. Turn the pump filter knob to the left, and drain off the remaining water.
5. Clean the pump filter using soft brushes. Make sure the drain pump propeller inside the filter is unclogged.
6. Reinsert the pump filter, and turn the filter knob to the right.

Illustration of hands using a tool to clean or repair a container (no text or symbols visible)

NOTE

- Some pump filters feature a safety knob that is designed to prevent accidents by children. To open the safety knob of the pump filter, push in and turn it

The image is too blurry to recognize any text content.

Maintenance

Detergent Drawer

Diagram illustrating a manual tool interacting with a device, showing directional arrows and a labeled component 'A' in an inset.

1. While holding down the release lever (A) on the inner of the drawer, slide open the drawer.
2. Remove the release lever and the Liquid detergent guide from the drawer.

Illustration of hands using a tool to adjust or install a component on a sink (no text or symbols visible)

1. Clean the drawer components in flowing water using a soft brush.

1. Clean the drawer recess using a soft brush.

Recovery from freezing

The washing machine may freeze when it drops below 0 °C.

1. Turn off the washing machine, and unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.

NOTE

If the washing machine still doesn't operate normally, repeat the above steps until it operates normally.

Care against an extended time of disuse

Avoid leaving the washing machine unused for an extended time. If this is the case, drain the washing machine and unplug the power cord.

1. Turn the Cycle Selector to select a RINSE+SPIN.
2. Empty the drum, and press Start/Pause.
3. When the cycle is complete, close the water tap and disconnect the water hose.
4. Turn off the washing machine, and unplug the power cord.
5. Open the door to let air circulate through the drum.

中

TroubleshootingTroubleshooting

Checkpoints

If you encounter a problem with the washing machine, first check the table below and try the suggestions.

Problem Action
Does not start.	Make sure the washing machine is plugged in.Make sure the door is properly closed.Make sure the water taps are open.Make sure to press or tap Start/Pause to start the washing machine.Make sure Child Lock ☑ is not activated.Before the washing machine starts to fill, it will make a series of clicking noises to check the door lock and does a quick drain.Check the fuse or reset the circuit breaker.
Water supply is insufficient, or no water is supplied.	Fully open the water tap.Make sure the door is properly closed.Make sure the water supply hose is not frozen.Make sure the water supply hose is not kinked or clogged.Make sure there is sufficient water pressure.
After a cycle, detergent remains in the detergent drawer.	Make sure the washing machine is running with sufficient water pressure.Make sure the detergent is added to the centre of the detergent drawer.Make sure the rinse cap is inserted properly.If using granular detergent, make sure the detergent selector is in the upper position.
Does not drain and/or spin.	Make sure the drain hose is straightened all the way to the drain system. If you encounter a drain restriction, call for service.Make sure the debris filter is not clogged.Close the door and press or tap Start/Pause. For your safety, the washing machine will not tumble or spin unless the door is closed.Make sure the drain hose is not frozen or clogged.Make sure the drain hose is connected to a drain system that is not clogged.If the washing machine is not supplied with sufficient power, the washing machine temporarily will not drain or spin.As soon as the washing machine regains sufficient power, it will operate normally.
The door does not open.	Press or tap Start/Pause to stop the washing machine.It may take a few moments for the door lock mechanism to disengage.The door will not open until 3 minutes after the washing machine has stopped or the power turned off.Make sure all the water in the drum is drained.The door may not open if water remains in the drum. Drain the drum and open the door manually.Make sure the door lock light is off. The door lock light turns off after the washing machine has drained.
	Make sure you use the recommended types of detergent as

Troubleshooting

Problem Action
Stops.	Plug the power cord into a live electrical outlet.Check the fuse or reset the circuit breaker.Close the door and press the Start/Pause button to start the washing machine.For your safety, the washing machine will not tumble or spin unless the door is closed.Before the washing machine starts to fill, it will make a series of clicking noises to check the door lock and does a quick drain.There may be a pause or soak period in the cycle. Wait briefly and the washing machine may start.Make sure the mesh filter of the water supply hose at the water taps are not clogged. Periodically clean the mesh filter.If the washing machine is not supplied with sufficient power, the washing machine temporarily will not drain or spin. As soon as the washing machine regains sufficient power, it will operate normally.
Fills with the wrong water temperature	Fully open both taps.Make sure the temperature selection is correct.Make sure the hoses are connected to the correct taps. Flush water lines.Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot water at the tap. Also, check the water heater capacity and recovery rate.Disconnect the hoses and clean the mesh filter. The mesh filter may be clogged.While the washing machine fills, the water temperature may
Leaks water.	Make sure the door is properly closed.Make sure all hose connections are tight.Make sure the end of the drain hose is correctly inserted and secured to the drain system.Avoid overloading.Use high efficiency (HE) detergent to prevent oversuding.
Has odours.	Excessive suds collect in recesses and can cause foul odours.Run cleansing cycles to sanitize periodically.Clean the door seal (diaphragm).Dry the washing machine interior after a cycle has finished.
No bubbles are seen (Bubbleshot models only).	Overloading may screen bubbles.Severely contaminated laundry may not generate bubbles.
Can I open the Add Door at any time?	The Add Door can be opened only when the Indicator appears. However, it does not open in the following cases:- When the boiling or drying process is running and the internal temperature becomes high.- If you set the Child Lock for safety reasons.- When the drum wash or drum drying cycle is running that does not involve additional laundry.

If a problem persists, contact a local Samsung service centre.

Troubleshooting

Information codes

If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions.

Code Action
4C	Water is not supplied.Make sure the water taps are open.Make sure the water hoses are not clogged.Make sure the washing machine is operating with sufficient water pressure.Make sure that the cold water tap and the hot water tap are properly connected.Clean the mesh filter as it may be clogged.NOTEWhen the washer displays the "4C" code, the washer do draining for 3 minutes. During this time, the Power button is inoperative.
4C2	Make sure the cold water supply hose is firmly connected to the cold water tap.If it is connected to the hot water tap, the laundry may be deformed with some cycles.
	Water is not draining.Make sure the drain hose is not frozen or clogged.Make sure the drain hose is positioned correctly, depending on the connection type.
DC3	The Add Door lock/unlock is not working properly.Turn the machine off, and restart the cycle.If the information code remains, contact a customer service centre.
OC	Water is overflowed.Restart after spinning.If the information code remains on the display, contact a local Samsung service centre.
LC, LC1	Check the drain hose.Make sure the end of the drain hose is placed on the floor.Make sure the drain hose is not clogged.If the information code remains, contact a customer service centre.NOTEWhen the washer displays the "LC,LC1" code, the washer do draining for 3 minutes. During this time, the Power button is inoperative.
UB	Spinning does not work.Make sure laundry is spread out evenly.Make sure the washing machine is on a flat, stable surface.Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory, and an "UB" check message will be shown in the display.

Troubleshooting

Code Action
HC	High temperature heating checkIf the information code remains, contact a customer service centre.
1C	The Water Level sensor is not working properly.Try power off and restarting the cycle.Check WaterLevel Sensor wire harness.If the information code remains, contact a customer service centre.NOTEWhen the washer displays the "1C" code, the washer do draining for 3 minutes. During this time, the Power button is inoperative.
8C	The MEMS sensor is not working properly.Turn the machine off, and restart the cycle.If the information code remains, contact a customer service centre.
AC	Check communications between main and sub PBAs.Try power off and restarting the cycle.If the information code remains, contact a customer service centre.
AC6	Check communications between main and inverter PBAs.Depending on the state, the machine may automatically returns to normal operation.Turn the machine off, and restart the cycle.

Specifications

Fabric care chart

The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundry problems.

	Resistant material Do not iron
[SK3K]	Delicate fabric	A	Can be dry cleaned using any solvent
[S30D]	Item can be washed at 95 °C Dry Clean
	Item can be washed at 60 °C	P	Dry clean with perchloride, lighter fuel, pure alcohol or R113 only
	Item can be washed at 40 °C	F	Dry clean with aviation fuel, pure alcohol or R113 only
[SY3C]	Item can be washed at 30 °C Do not dry clean
	Hand wash only Dry flat	-
[G346]	Dry clean only Can be hung to dry	III

Specifications

Protecting the environment

• This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manufacturer's instructions.
• Use stain removal products and bleaches before the wash cycle only when strictly necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon the program used).

Specification sheet

“*” Asterisk(s) means variant model and can be varied (O-9) or (A-Z).

Type Front loading washing machine
Model name WW80K54****WW70K52****
Dimensions		W600 x D600 x H850 (mm)	W600 x D550 x H850 (mm)
Water pressure 50 kPa - 800 kPa
NET weight 69 kg 60 kg
Wash and spin capacity 8.0 kg 7.0 kg
Power consumption	Washing	220 V 80 W
		240 V 80 W
	Washing and heating	220 V 2000 W
		240 V 2400 W
	Spin 220	240 V 600 W	500 W
	Pumping		30 W
Spin revolutions		1400 rpm	1200 rpm

NOTE

The design and specifications are subject to change without notice for quality improvement

1. 2017年1月1日

SAMSUNG

WW**K64****,WW**K62****,WW**K54****,WW**K52****

The image is too blurry to recognize any text content.

ر Wheat أو حريق

The image is too blurry to recognize any text content.

. بازAO الإصدانة

، تسرب الباد.

2.10 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31

©

معلومات السلامة

Diagram of a washing machine with numbered parts for identification and assembly reference.

©

Diagram illustrating a hand holding a tool with Chinese text, showing a step-by-step instructions for adjusting a device.

Technical diagram of a mechanical component with labeled parts and directional arrows indicating motion or flow.

Diagram showing hand positioning and valve adjustment on a faucet, with labeled parts E and numbered parts

©

Technical line drawing of a mechanical component with labeled point A (no text or symbols beyond label)

©

Diagram of a bathroom sink with labeled anatomical structure A, showing height measurement and magnified view.

مُحْدَّرَّسَ لُفْطَرِ الْدَالَّةِ اُحْدَّرَّسَ لُسْعَةِ الْقَرِفٍ ١ مَترْرِي الْ

SUPER ECO WASH Uzbekulilululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululululull BEDDING COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTTON COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATO COTATUULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLULLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLLUMLUSLUM UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UML UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UMA UFA A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A F A C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D

©

The image contains no discernible text or characters.

Smart Check

1 . Add Door 2 . Add Door . Inserted your phone for your phone to get it. - Let you go to your phone for your phone to get it. - You go to your phone for your phone to get it. - You go to your phone for your phone to get it. .(A) ال commanded (A) • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it. • Put your Phone to get it.

Diagram illustrating a mechanical or electrical component being processed with forceps, showing directional arrows and a labeled component 'A' in the inset.