AS18P0GE - Air-conditioner SAMSUNG - Free user manual and instructions

USER MANUAL AS18P0GE SAMSUNG

MANUAL DE INSTRUÇÕES

GEBRAUCHSANWEISUNG

ΟΔΗΓΙΕΣ ΧΡΗΣΤΗ

Indoor unit Outdoor unit

AS07P8GB US07P8GB

AS07P8GE US07P8GE

AS09P8GB US09P8GB

AS09P8GE US09P8GE

AS12PGGB US12PGGB

AS12PGGE US12PGGE

AS14PGGB US14PGGB

AS18P0GB US18P0GB

AS18P0GE US18P0GE

AS24P6GB US24P6GB

AST24P6GE UST24P6GE

Split-type Room Air Conditioner (Cool)

Simple geometric shape with a black dot and horizontal line, no text or symbols present

Safety Precautions

WARNING

◆If the power supply cord of this air conditioner is damaged, it must be replaced by the manufacturer or its authorized service personnel only in order to avoid a safety hazard.

DANGER

◆Do not attempt to install the air conditioner by yourself.

◆This unit contains no user-serviceable parts. Always consult authorized service personnel for repairs.

◆When moving, consult authorized service personnel for disconnection and installation of the unit.

Do not become over-exposed to cold air by staying in the direct path of the air flow of the air conditioner for extended periods of time.

◆Do not insert fingers or objects into the outlet port or intake grilles.

◆Do not start and stop air conditioner operation by disconnecting the power supply cord and so on.

◆Take care not damage the power supply cord.

◆In the event of a malfunction(burning smell, etc.), immediately stop operation, turn off the electrical breaker, and consult authorized service personnel.

CAUTION

◆Provide occasional ventilation during use.

◆Do not direct air flow at fireplaces or heating apparatus.

◆Do not climb on, or place objects on, the air conditioner.

◆Do not hang objects from the indoor unit.

◆Do not set flower vases or water containers on top of air conditioner.

◆Do not expose the air conditioner directly to water.

◆Do not touch the power supply plug with wet hands.

◆Do not turn off the air conditioner with pulling power cord.

◆Turn off power source when not using the unit for extended periods.

◆Do not place animals or plants in the direct path of the air flow.

◆Do not drink the water drained from the air conditioner.

◆Do not use in applications involving the storage of foods, plants or animals, precision equipment, of art works.

◆Do not block or cover the intake grille and outlet port in use.

◆Do not use inflammable gases near the air conditioner.

◆If the supply cord is damaged, it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard.

◆Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely.

◆Please recycle or dispose of the packaging material for this product in an environmentally responsible manner.

◆The appliance is not intended for use by young children or infirm persons without supervision: young children should be supervised to ensure that they do not play with the appliance.

◆Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency.

Contents

◆ PREPARING YOUR AIR CONDITIONER

■ Safety Precautions 2
■ View of the Unit 4
■ Remote Control-Buttons and Display 6
■ Getting Started 7
■ Inserting the Remote Control Batteries 8

◆ OPERATING YOUR AIR CONDITIONER

■ Selecting the Automatic Operating Mode ..... 9
■ Cooling Your Room 10
■ Changing the Room Temperature Quickly .... 11
■Removing Excess Humidity 12
■ Airing Your Room 13
■ Selecting Energy Saving Mode 14
■ Air Cleaning (Titanium Filter Operating) 15
■ Adjusting the Air Flow Direction Vertically 16
■ Adjusting the Air Flow Direction Horizontally 17

◆ PROGRAMMING YOUR AIR CONDITIONER

■ Setting the On Timer 18
■ Setting the Off Timer 19
■ Setting the Sleep Timer 20

◆ RECOMMENDATIONS FOR USE

■ Operating Recommendations 21
■ Temperature and Humidity Ranges 22
■ Operating Your Air Conditioner Without the Remote Control ..... 22
■ Solving Common Problems 23
■ Cleaning Your Air Conditioner 24
■ Cleaning Deodorizing, Bio-Green and Titanium filter (Option) .... 24

◆ TECHNICAL SPECIFICATIONS

View of the Unit

The design and shape are subject to change according to the model.

Indoor Unit

Auto grille Air Inlet Room temperature sensor Air filter (under the grille) Air flow blades (outlet) On/Off switch Remote Control Sensor

Operation indicator Timer indicator Set temperature & room temperature Sleep Timer indicator Air Cleaning indicator Fan speed setting

Note®

◆If you want to turn on/off the Display during operation, press the 📄 button on the remote control.
◆The room temperature sensor senses air temperature around the sensor, and shows the temperature on the display.

Outdoor Unit

US07P8GB US07P8GE US09P8GB US09P8GE

Air Inlet(Rear) Air Outlet Connection Valve (inside)

Outdoor Unit

US12PGGB US12PGGE US14PGGB

Air Inlet(Rear) Air Outlet Connection Valve (inside)

Outdoor Unit

US18P0GB US18P0GE US24P6GB UST24P6GE

Air Inlet(Rear) Air Outlet Connection Valve

Remote Control - Buttons and Display

Remote control transmission indicator Battery discharge indicator Fan speed Air Cleaning indicator Sleep mode On Timer setting On/Off button Temperature adjustment buttons Swing button Fan speed adjustment button Sleep button On Timer button Off Timer button Operating mode (AUTO, COOL, DRY, FAN) Turbo mode Temperature setting Air flow direction Off Timer setting Energy saving Digital i On/Off button Mode selection button (AUTO, COOL, DRY, FAN) Energy saving button Turbo button Air Cleaning button Timer Set/Cancel button

Getting Started

You have just purchased a split type air conditioner and it has been installed by your installation specialist.

Your Owner's Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit's features.

The booklet is organized as follows.

◆The following figures are shown on pages from 4 to 6 :
- Indoor and outdoor units
- Remote control(buttons and display)
They will help you find the buttons and understand the symbols displayed.

◆In the manual, you will find a series of step-by-step procedures for each function available.

The illustrations in the step-by-step procedures use three different symbols:

PRESS PUSH HOLD DOWN

Inserting the Remote Control Batteries

Illustration of a remote control device with internal components and a paper clip (no text or symbols)

Illustration of a mobile phone with a flash drive and internal components (no text or symbols)

You must insert or replace the remote control batteries when :

◆You purchase the air conditioner
◆The remote control does not work correctly

B

◆Use two AAA, LR03 1.5V batteries.
◆Do not use old batteries or different kinds of batteries together.
◆Batteries may be completely discharged after 12 months, even if they have not actually been used.

1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.
2 Insert the two batteries, taking care to respect the polarities :

◆+ on the battery with + on the remote control.
◆- on the battery with - on the remote control.

3 Close the cover by sliding it back until it clicks into place.

Selecting the Automatic Operating Mode

You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the optimum temperature and the fan speed is selected automatically.

1 If necessary, press the ⏻ (On/Off) button.

Result:

◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.

IMPORTANT

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in
◆Stopped

It will start up normally after three minutes.

2 If the Auto is not displayed at the top of the remote control, press the Mode button on the remote control one or more times until it appears.

Result:

◆ The indoor unit beeps each time you press the ○ button.
◆The air conditioner runs in AUTO mode.

[3] 6: e

You can change modes at any time.

On/Off Power Mode

Auto NATURAL Digital / On/Off Mode

Cooling Your Room

Digital / On/Off Mode

124°C Digital / On/Off Mode

22°C Digital / On/Off Mode

122°C

You must select the Cool mode if you wish to adjust the:

◆ Cooling temperature
◆ Fan speed when cooling

1 If necessary, press the ⏻ (On/Off) button.

Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.

IMPORTANT

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in
◆Stopped
It will start up normally after three minutes.

2 If the ✗ is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press the button.
◆ The air conditioner runs in COOL mode.

You can change modes at any time.

3 To adjust the temperature, press the button one or more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result: ◆ Each time you press the button:

• The temperature is adjusted by 1°C
• The indoor unit beeps
  ◆The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature.
  ◆If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating.

4 Select the fan speed by pressing the button one or more times until the required setting is displayed:

Automatic (rotated : Low Medium High

Result: Each time you press the button, the indoor unit beeps.

5 To control the direction of the air flow, refer to pages 16 and 17.

Changing the Room Temperature Quickly

The Turbo cooling function is used to cool your room as quickly as possible.

Examples: You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible.

The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected.

1 If necessary, press the ⏻ (On/Off) button.

Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.

2 Press the 🔊 button.

Result: ◆The temperature and fan settings are adjusted automatically.
◆The air conditioner cools the room as quickly as possible.
◆After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings.
But, if you press the 🔊 button in DRY or FAN mode, it will change to AUTO mode automatically.

3 If you wish to stop the Turbo function before the end of the 30-minute period, press the 🔒 button again.

Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings.

4 To control the direction of the air flow, refer to pages 16 and 17.

TURBO Digital / On/Off Mode

Removing Excess Humidity

Digital On/OFF Mode

24°C Digital i On/Off Mode

23°C Digital / On/Off Mode

If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.

1 If necessary, press the ⏻(On/Off) button.

Result: ◆ The operation indicator on the indoor unit lights up.

◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.

IMPORTANT

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in
◆Stopped

It will start up normally after three minutes.

2 If the ⚙ is not displayed at the top of the remote control, press the ○ button on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press the button.

◆ The air conditioner runs in DRY mode.

Note You can change modes at any time.

3 To adjust the temperature, press the button one or more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result: ◆ Each time you press the button.

- The temperature is adjusted by 1°C

- The indoor unit beeps

◆The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.

4 To control the direction of the air flow, refer to pages 16 and 17.

Airing Your Room

If the atmosphere in your room is stale, you can air the room using the Fan feature.

1 If necessary, press the ⏻(On/Off) button.

Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.

2 If the ⚫ is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press the button.

◆ The air conditioner runs in FAN mode.
◆ The temperature is set automatically.

Note: You can change modes at any time.

3 Select the fan speed by pressing the button one or more times until the required setting is displayed:

Low

Medium

High

Result: Each time you press the button, the indoor unit beeps.

4 To control the direction of the air flow, refer to pages 16 and 17.

On/Off Mode

Digital Air On/Off Mode

Digital Air On/Off Mode

Selecting Energy Saving Mode

Digital On/Off Mode

26°C Δl

28°C Digital i On/Off Mode

128°C

If you wish to save energy when using your air conditioner, select the Energy saving mode with the Energy saving button.

1 If necessary, press the ⏻ (On/Off) button.

Result: ◆The operation indicator on the indoor unit lights up.

◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.

IMPORTANT

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in
◆Stopped

It will start up normally after three minutes.

2 Select COOL mode by pressing the 📋 button.

You can select the Energy saving mode only in COOL mode.

3 Press the button.

Result: ◆ The indoor unit beeps.

◆ The air conditioner runs in the Energy saving mode.
◆ The outer air flow blade moves up and down.
◆ To stop the Energy saving mode, press the 🔊 button again.

4 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 26°C and 30°C inclusive.

If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature.

5 To select the fan speed, press the 🔊 button one or more times until the required setting is displayed.

6 To control the direction of the air flow, refer to pages 16 and 17.

Air Cleaning (Titanium Filter Operating)

Titanium Filter removes microscopic dirt and unpleasant odors. Since it is an additional function, you can select it any mode, even when the air conditioner is turned off.

1 Press the

Result:

The air conditioner run in the air cleaning mode.

◆ The indoor unit beeps.

◆ If you press the ⚙ button when the air conditioner is on, the function is operated additionally.

◆If you press the 🔊 button during off, the air conditioner will turn on automatically and operate air cleaning in the Fan mode with Low fan speed.

2 If you wish to stop the Air cleaning function, press the

Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings.

3 To control the direction of the air flow, refer to pages 16 and 17.

124°C Digital t on/off Mode On Cancer Off Cancer Therapy SelfCancer

Adjusting the Air Flow Direction Vertically

124°C Digital / On/Off Mode

Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner.

1 Press the button one or more times as required.

Result: The outer blade is adjusted vertically.

RECOMMENDATION When... Adjust the blade to face...

Cooling Upwards.

2 If you want the blade to move up and down automatically when the air conditioner is operating, press the ⏻ button.

Result: The blade move up and down, around the base position set.

3 To stop the blade moving up and down, press the button again.

If you switch the air conditioner... Then the blade is...

Off Closed completely.

On again Set to the initial position powered.

Adjusting the Air Flow Direction Horizontally

There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally.

1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways.

Illustration of a silver air conditioner panel with a circular button and triangular handle (no text or symbols)

Setting the On Timer

ON 3.0 Hr On Temperature On Off Temperature

24°C ON 3.0 Hr Off Timer Off Timer Timer Set/Cancel

24°C 3.0 Hr Digital Off/Off Mode

On Timer Off Timer Set/Cancel

The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours.

1 To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive.

2 Press the Time Set/Cancel (Set/Cancel) button to complete the setting.

Result:

◆The remaining time is displayed.

◆Blinking of the timer indicator stops.

◆The selected mode and the temperature on the display disappear after 10 seconds.

◆The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On timer setting.

3 To select an operating mode in advance, press the Mode button until the desired mode is displayed at the top of the remote control.

Result:

◆The air conditioner will run in the selected mode when it is turned on.

To Cancel the On Timer

Press the Timer Set/Cancel (Set/Cancel) button.

[3]c@

◆If you press the ○ button when the Off Timer is set, the Off Timer is also cancelled.

Setting the Off Timer

The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours.

1 To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive.

2 Press the /Cancel (Set/Cancel) button to complete the setting.

Result: ◆The remaining time is displayed.
◆Blinking of the timer indicator stops.
◆The air conditioner will switch off automatically when the counter displayed on the remote control reaches the set time and disappears the Off timer setting.

Example: If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours:

1. Press the button until '2.0 Hr' is displayed.
2. Press the Timer Set/Cancel (Set/Cancel) button.
3. Press the button until '4.0 Hr' is displayed.
4. Press the Timer Set/Cancel (Set/Cancel) button.

Note: You can see or change the setting mode and/or the temperature by pressing the ⏻ button or the Ⓐ button after setting the Off timer.

To Cancel the Off Timer

Press the Timer Set/Cancel (Set/Cancel) button.

Noe

◆If you press the ○ button when the On Timer is set, the On Timer is also cancelled.

24°C OFF 3.0 Hr On Timer Off Time

824° 3.0 Hr On Timer Off Timer Set/Cancel

On Timer Off Timer Timer Set/Cancel

Setting the Sleep Timer

24°C Digital / On/Off Mode

24°C On Timer Off Timer Set/Control

The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of six hours.

Note

If you wish to switch the unit off at a specific time, refer to page 19.

1 Make sure that you have selected COOL mode.

2 Press the

Result: ◆The indoor unit beeps.

◆The air conditioner will be controlled as indicated in the illustrations below.

Cooling The desired temperature is increased by 1^ C every hour. When it has been increased by 2^ C (after two hours), the temperature is maintained for four hours.

To Cancel the Sleep Timer

If you no longer wish to use the Sleep Timer that you have set, you can cancel it at any time.

Press the ⚙ button.

Result: ◆The indoor unit beeps.

◆The .is no longer displayed.

◆The air conditioner operates normally.

Operating Recommendations

Here are a few recommendations that you should follow when using your air conditioner.

Topic Recommendation

Power failure

If a power failure occurs when the air conditioner is operating, the unit is switched off.When the power returns, the air conditioner starts up again automatically.

Temperature and Humidity Ranges

The following table indicates the temperature and humidity ranges within which the air conditioner can be used.

If the air conditioner is used at... Then...

High temperatures	The automatic protection feature may be triggered and the air conditioner stopped.
Low temperatures	A water leak or some other malfunction may occur if the heat exchanger freezes.
High humidity levels	Water may condense on and drip from the surface of the indoor unit if it is used for long periods.

Mode Indoor Temperature Outdoor Temperature Indoor Humidity

Cooling 18°C to 32°C approx. 21°C to 43°C approx. 80% or less Drying 18°C to 32°C approx. 18°C to 43°C approx. -

If the cooling operation is used at over 33^ C(indoor temperature) then, it does not cool at its full capacity.

Operating Your Air Conditioner Without the Remote Control

Illustration of a wall-mounted air conditioner unit with a circular vent and handle (no text or symbols)

Line drawing of a kitchen sink with a digital timer and hanging handle (no text or symbols)

Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken.

1 Slide the lower front grille down.

2 To switch the air conditioner on, press the ON/OFF switch on the right side of the indoor unit.

Result: ◆ The OPERATION indicator on the indoor unit comes on.
◆ The indoor unit beeps.
◆ The air conditioner starts up in the most suitable mode for the room temperature:

Room Temperature Operating Mode Temperature Setting

21°C or above

Cool

24°C approx.

3 To switch the air conditioner off, press the ON/OFF switch again.

Note

Even if the air conditioner has been switched on via the ON/OFF switch, operations can still be controlled using the remote control as usual.

Before contacting the after-sales service, perform the following simple checks.

They may save you the time and expense of an unnecessary call.

Problem	Explanation/Solution
The air conditioner does not operate at all	◆Check that the breaker used for the air conditioner is switched on.◆Check that the operation indicator on the indoor unit is on;if necessary press the (On/Off) button on the remote control.◆Check whether the TIMER indicator on the indoor unit is switched on.If so:- Wait until the switch-on time is reached and the air conditioner starts up automatically- Cancel the timer (see pages 18 and 19 for further details)
The air conditioner does not operate with the remote control	◆Check that there are no obstacles between you and the indoor unit.◆Check the remote control batteries.◆Check that you are close enough to the indoor unit (seven meters/yards or less).
No beep is heard when you press the (On/Off) on the remote control	◆Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit.◆Replace the remote control batteries if necessary.
The air conditioner does not cool	◆Check that the correct operating mode has been selected (AUTO, COOL).◆The room temperature may be too low.◆Dust may be blocking the air filter guard; refer to page 24 for cleaning instructions.◆Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change when you press the button	◆Check that the operating mode is set to COOL or FAN ; in the AUTO mode, the fan speed changes automatically and in the DRY mode, it is set to AUTO.
The air flow direction does not change when you press the button	◆Check that the air conditioner has been switched on; if necessary,press the (On/Off) button on the remote control.
The timer is not correctly triggered	◆Check that the timer has been programmed correctly; see pages 18 and 19.
Odours are permeated in the room during air conditioning	◆Air the room.

Cleaning Your Air Conditioner

Illustration of a door handle with a circular knob and handle, mounted on a rectangular frame (no text or symbols)

Grille support Lower front grille Hook Body groove

To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter.

PORTANT

Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit.

1 Slide the lower front grille down.

2 Slide the upper front grille up slightly, then open the grille by pulling right and left sides of the grille.

3 Disassemble the upper front grille by opening the grille completely.

4 Lift out the bottom edge of the air filters and pull down to release them.

5 Remove all dust on the air filters with a vacuum cleaner or brush.

6 When you have finished, insert the top part of the filters into their slot and push down on the bottom edge until they click into place.

7 Clean the front grille with a damp cloth and mild detergent (do NOT use benzene, solvents or other chemicals).

8 Fix the left side of grille support, then insert the right side of grille support.

If you have not used the air conditioner for a long period of time, set the fan going for three to four hours to dry the inside of the air conditioner thoroughly.

◆ To close the upper front grille completely after cleaning filters, turn on and turn off the air conditioner.

Cleaning Deodorizing, Bio-Green and Titanium Filter (Option)

**07/09**

Titanium Filter Bio-Green Filter Deodorizing Filter

**12/14/18/24**

Bio-Green Filter Deodorizing Filter Titanium Filter _

To remove minute dust particles and odors, Deodorizing, Bio-Green and Titanium filters are installed in the air conditioner. You should clean the filters every 3 months.

1 Open the upper front grille by pulling right and left sides of the grille.

2 Pull out the Deodorizing, Bio-Green and Titanium filter.

3 Wash the filters with clean water, then dry them in the shade.

4 Insert the filters into the original position.

You can change the position of filters with each other.

5 Close the front grille.

Technical Specifications

Model Indoor unit	Power Supply
AS07P8GB
AS09P8GB
AS12PGGB	220V~, 60Hz
AS14PGGB
AS18P0GB
AS24P6GB
AS07P8GE
AS09P8GE
AS12PGGE	220-240V~, 50Hz
AS18P0GE
AST24P6GE

THIS AIR CONDITIONER IS MANUFACTURED BY: