HXE2S1TGL - Washing machine LG - Free user manual and instructions

USER MANUAL HXE2S1TGL LG

Black LG hard drive with grid pattern and circular logo on front (no text or symbols beyond branding)

• Thank you for purchasing this product.
• This user manual contains instructions on how to use the product properly.
• Please read this manual carefully.
• Be sure to follow the instructions and notices.
• Backup Program (Nero BackItUp & Burn) and its manual are in the external HDD.
• Appearance of product and components may differ from the image.
• User Manuals and Backup Program can be deleted if you format external HDD.

Please save user manuals and backup program into other computer.

If you delete them, you can download through http://www.nero.com/lgehdd without charge.

(For download method, please refer to the FAQ, page 31)

Warning & Caution During Use

Check before use

• This user manual contains instructions on how to use the product properly.
• Please read this manual carefully.
• Be sure to follow the instructions and notices.

Notes are divided into "Warning" and "Caution", each denotes the following:

Warning

Caution

Tip

Failure to follow the instructions below may result in injuries or product damage.

Failure to follow the instructions below may result in serious injuries or product damage.

It provides a recommendation to prevent product failure or malfunction in advance when using the product.

Warning and Caution

Warning

• It may cause defect under following circumstance.
• Keep away from humidity, dust, and soot (may cause fire or electrocution)
• Keep away from areas with temperature of above 35 °C(95 °F)
• Keep away from magnetic fields, water, heat
• Do not use during thunder and lightning.
• Do not drop the product or place heavy objects on it.
  ●The product may not work properly in areas with high static electricity.
  ●Make sure no dust or other foreign matter gets inside the USB port. It may cause data damage.
• Keep important data separately. We shall not be responsible for any loss of or damage to saved or recorded data caused by product defect, product repair, or any other reason.
  ●Abnormal use is not guaranteed.
  ●Make sure no liquid or water percolate through the product, it may cause product damage.

Warranty & Caution During Use

Caution

• If smoke, unpleasant odor or noise is produced, turn off the computer and peripherals immediately and remove the USB cable.
• Do not disassemble, repair or rebuild the product.
• Do not pull out the USB cable while the external HDD is connected. (The product may cause malfunction.)
• LG Electronics will replace this product if it is faulty due to a manufacturing or materials defect, except where damage is caused by your use or negligence.
• LG EXCLUDES LIABILITY FOR ALL CONSEQUENTIAL AND OTHER LOSS, INCLUDING LOSS OF DATA.
  -Please note, it may injure your hand when you open the seal.
  -The use of improper or abnormal measures, non-professional personnel in the maintenance, alteration or accident damaged part of the irresponsible.
  -If you can not repair or exchange, will be the same product or replace the capacity. (Only applies to the subject of the case free of charge)
  -If the condition is abnormal temperature and keek a long time, it may cause product defect.
  -Please note that external hard drive LED and the light emitted when exposed for a long time may lead to vision loss.
  -Recommend this product to regularly back up data stored in other storage devices.

Warranty

1. Any defect found after normal use and during the warranty period shall be repaired free of charge.
2. Fees shall be charged for the type of repair other than that covered by the warranty even during the warranty period.
3. Present this warranty when requesting for repair.

The following repair services shall be provided for a fee:

• Defect caused by careless use.
• Defect caused by repair performed at places other than the authorized service centers.
• Defect caused by the disassembly of the device by the user.
• Defect caused by natural disasters such as flood, fire, and earthquake.

Table of Contents

●Warning & Caution During Use 2
●Table of Contents 4
●Package Contents 5
- USB 2.0
- USB 3.0
●Name of Parts & Connect Cable 6
- USB 2.0
- USB 3.0
●USB Port Connect 7
- Windows User
- Mac OS User
●Safely remove 9
●Partition Creation and Format 10
●Mac Format 11
●Backup Program (Nero BackItUp & Burn) 12
●Troubleshooting 31
●LG Service Site 33

Package Contents

Components

USB 2.0USB 2.0

Line drawing of a rectangular electronic device labeled 'La' with a small port and indicator lights (no text or symbols beyond the label)

LG External HDD

LB QUICK GUIDE & WARRANTY CARD

Quick Guide USB 2.0 cable

USB 3.0USB 3.0

Line drawing of a rectangular electronic device with a logo and ports (no text or symbols)

LG External HDD

QUICK GUIDE & WARRANTY CARD

Quick Guide USB 3.0 Micro-B Type cable

※The components are subject to change without prior notice.

※ Appearance of product may differ from the image.

Name of Parts & Connect Cable

USB 2.0USB 2.0

Name of parts

Diagram of a device with labeled parts, showing a rectangular base and two labeled arrows pointing to features.

①USB port

②LED

[LED Operation Status]

- LED flashes during reading from or writing to the external HDD.

USB 3.0USB 3.0

Name of parts

① ②

①USB 3.0 Micro-B port

②LED

[LED Operation Status]

- LED flashes during reading from or writing to the external HDD.

※ Appearance of product may differ from the image..

※USB 3.0 only can be connected on the system with support USB3.0.

Connect cable

USB Model > Connect the cable 3.5g

※ The components are subject to change without prior notice.

※ Appearance of product may differ from the image.

USB 3.0 only can be connected on the system with support USB3.0.

※ In order to use the LG's HDD which support USB 3.0 runs on the maximum transmission speed, it must be connected to the PC which support USB 3.0, or the PC with USB 3.0 host card.

※The OS and USB 3.0 Driver must be upgrade if the user want to get the better performance and reliability.

USB Port Connect

Windows User

- Windows XP / Vista, Windows 7

●Connecting to Windows / XP / VISTA, Windows 7

- When connected to a computer using the USB cable, the external HDD is recognized and can be used immediately.

※ When installing on Windows ME, and files such as usbntmap.sys are being requested, specify the base2.cab file in the Win9X folder on the Windows ME original CD to enable automatic installation.

- If the mobile storage is connected properly to your computer, the mobile storage icon will appear in the notification area.

(The icon shape may vary according to your computer environment.)

USB Port Connect

Mac User

- Mac OS

●Connecting to Mac OS X v10.4.8 or later

1. There is no need to install an additional driver on Mac OS 10.0 or later.
2. When using Mac OS, format as extended Mac format (HFS+).

*If formatted as NTFS, the external HDD can be recognized by Mac; data cannot be copied to / from it, however. Format as FAT32 to enable use in both PC and Mac.

※If Mac OS PC USB 3.0 is not supported on systems that do not support USB 3.0 speed.

Tip

If formatted as FAT 32 on PC, the following problems may occur on Mac:

• Files more than 4GB cannot be copied at one time.
• The attribute of the compression file is not changed when files such as Quick data are included.
• The size of the stored data is increased. Thus, formatting as extended format on Mac is recommended.

●Safely remove (unplug)

1. Remove the device after moving the driver icon of the device to "Trash."

Warning

※ Failure to move the driver icon of the device to “Trash” before removing the device may cause damage to the volume of the disk.

Safely remove (Unplug)

● Safely remove (unplug)

※Removing the external HDD from the PC without following the safe removal instruction may cause problem to the stored data or operation of the external HDD.

1. Double-click the Safely Remove Hardware Icon in the notification area.

Safely Remove Hardware 6:55 PM

1. On the window, click the Stop button followed by OK.

Safely Remove Hardware Select the device you want to unplug or east, and then click Stop. When Windows notifies you that it is safe to do so unplug the device from your computer. Hardware devices: USB Max Storage Device USB Max Storage Device at Location 0 Properties Stop Display device components Close

Stop a Hardware device Continue devices to be stopped. Choose OK to continue. Windows will attempt to stop the following devices. After the devices are stopped they may be removed safely. USD Mass Storage Device Genetic volume - [H:] Hitachi HTS54321 ELBA300 USB Device OK Cancel

1. When the message indicates that is safe to remove the device appears, click OK and remove the external HDD after checking LED Operation Status.

Safe To Remove Hardware The 'USB Mass Storage Device' device can now be safely removed from the system. 6:59 PM

Partition Creation and Format

●Windows XP / Vista / Windows 7 User

- LG external HDD is already NTFS-formatted, but if you want to create or divide partition, follow this instruction.

(Attention: all data in external HDD will be deleted if you use this function.)

1. Left button click "My Computer" and Click "Manage".
2. Click the Disk Management.

Name: 10.0 File Edit View Help Name: 10.0 Description: Category: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name:

1. Choose the Disk Drive you want to delete partition and click "Delete Partition".
2. Choose the Disk Drive which is partition deleted and click "New Partition".

File 1 Set 14.0.0.0 Ctrl Open Help Save As Active Change Drive Left and Right... Find... Delete Portfolio... Properties Help

New Portion... Properties help

1. Click "Next" at the New Partition Wizard and select "Primary Partition".
2. Choose the partition size and click "Next".

Welcome to the New Card from MD41 The next file will be found in a context of using a selected file to create new card and include a link between the following files: to a file named "MD41" or "MD31" and also to a file named "MD41" or "MD31" and also to a file named "MD41" or "MD31" ...

SaaS Platform File Select to access the next page in the website or installed site Name: SaaS Platform File Address: SaaS Platform Language: 0000 OK Apply Cancel

1. Assign drive letter or path and click "Next".
2. Choose "NTFS" and check "Perform a quick format" and click "Next".

New Performance Options Current Settings • New Performance Options are currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are not currently set to • New Performance Options are now available at the end of the period • New Performance Options are now available at the end of the period • New Performance Options are now available at the end of the period • New Performance Options are now available at the end of the period • New Performance Options are now available at the end of the period • New Performance Options are now available at the end of the period • New Performance Options are now available at the end of the period • New Performance Options are now available at the end of the period - New Performance Options are now available at the end of the period - New Performance Options are now available at the end of the period - New Performance Options are now available at the end of the period - New Performance Options are now available at the end of the period - New Performance Options are now available at the end of the period - New Performance Options are now available at the end of the period - New Performance Options are now available at the end of the period - New Professional Services - 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 10

1. Click "Finish" to complete New Partition Wizard. NTFS format is completed.

Completing New Partition Wizard Form: 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 100% or 10 < Back to this dialog> PreStack Selection 3D Version 2017 Default Version New Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Version New Version 2017 Default Edition

Disk 1 Rank L45.05 GB Online New Volume (1x) L45.05 GB MTPS Healthy Primary platform Extended outliers Log on drive

※If you want FAT32-Format, the size of partition should be under 32GB.

Mac Format

Mac format

ST350082 OAS Media Verify Info Burn Misawi Eject Enable journaling New Image Convert Resource Image Log 74.5 GB TOSHIBA MK80... Macintosh HD 465.8 GB ST 350082 GA VIDEO MATSHITA DVD-R UJ-857 The Rosetta Stone Arabi... Volume Scheme: 1 Partition UNTITLED 1 Volume Information Name: UNTITLED 1 Format: Mac OS Extended (Journalised) Size: 465.76 GB To partition the selected disk, choose a volume scheme. Set the name, format, and size for each volume. Then click Apply. A new volume will be created. Size: 465.8 GB Options Revert Apply Disk Description: ST350082 OAS Media Total Capacity: 465.8 GB (500,107,862,016 Bytes) Connection Bus: USB Write Status: Read/Write Connection Type: External S.M.A.R.T. Status: Not Supported Partition Map Scheme: Master Boot Record

1. Connect the external HDD to your Mac.
2. Go to [Finder Menu Bar] → [Go Menu] → [Utilities], double click [Disk Utility].
3. Select the external HDD and choose the partition tab.
4. In the [Volume Scheme], select the number and size of partitions (maximum 16 partitions).
5. In the [Volume Option], enter the name and choose [Mac OS Extended (journaled)].
6. Click [Apply], to start formatting. It could take several minutes depending on your Mac.

Backup Program

Software Installation (Nero BackItUp & Burn Essential Version)

Note – Nero BackItUp S/W is available in Windows XP, Vista, Windows 7.

Nero BackItUp Essential does not offer the following features:

※ Backup and restore expert options
☐ ✗ Multiple targets for backups
Advanced encryption
Archive splitting
Extract files from drive backup
※ Create file filter
※ Backup with Nero BackItUp ImageTool
Features that are not available in Nero BackItUp Essentials are indicated by the icon.
The icon offers you upgrade possibilities, and gives information about it.
For more detailed information, please refer to Nero BackItUp & Burn's User Manual

Caution – Backup S/W and User manuals can be deleted if you format external HDD.

Please save the Backup S/W & User Manual into another computer.

It is possible to download Backup S/W & User Manual through below web site;

※ http://www.nero.com/lgehdd

LG Automotive External HDD Installer menu • BackItUp & Burn Essentials • User manual : English / Korean • Exit

1. Please connect external HDD to PC.
2. Click "Setup.exe" and Installer Screen will be displayed.
3. Click "BackItUp & Burn Essentials" to install Backup S/W.
4. Please wait while extracting automatically.

2PS Entering nero Cancel

Backup Program

Choose Setup Language Select the language for this installation from the choices below. English (United States) Chinese (Simplified) Chinese (Traditional) Czech Danish Dutch (Netherlands) English (United States) Finnish French (France) German (Germany) Greek Hungarian Italian (Italy) Japanese Korean Norwegian (Bokmal) Polish Portuguese (Brazil) Portuguese (Portugal) Russian Spanish (Chile) Spanish (Traditional Sort) Swedish Thai Turkish

1. After selecting the installation language and click the OK button.

Note - Install the language that is installed on the user's PC can be changed depending on the OS language.

InstallShield Wizard New BackupUp and Burs requires the following items to be installed on your computer. Click Install to begin installing these requirements. Status Requirement Pending MSI 4.5% (or Windows/XP x8E) Pending Microsoft VC Redset 2005 KB/973644 Pending Microsoft NT Framework 3.5 SP1 Pending Microsoft VLS/PLA Redset Pending Rebout Validate Install Cancel

1. Setup Wizard screen appears and click the Install button to proceed with the necessary preliminary work.

Install/Install Wizard New BackUp and Burn requires the following items to be installed on your computer. Click Install to begin installing these requirements. Status Requirement Succeeded MS1 4.5 for WindowsXP (463) Succeeded Microsoft NT Server 2005 (497704) Installing Pending Pending Extracting Files Extocking File: wsch. L.L.L /dataNetl isesewor/daNetl/DC20px To Directing: d:\408\bsa0231050ba106\fs2005b37 Installing Microsoft, NL1 Framework 3.5.3.P1 Cancel

Backup Program

InstallShield Wizard nero Preparing to Install... Now you use Excel and then setup to prepare the Installation Wizard, which will be done by, through the system setup process. Please wait. Configuring Windows Installer

nero Backflip and Rum - InstallShield(R) Wizard Welcome to the InstallShield Wizard for Nero Backflip and Rum The InstallShield(R) Wizard will install here Backflip and Rum on your computer to continue. This here.

1. Click "Next" button to proceed to the next step.

New BackUp and Run - InCalStockJ8 Wizard Serial number validation Please click the 'call' on a normal file in the main menu. Serial number 10.0000-10.0000 10.0000-10.0000 10.0000-10.0000 Back Next Cancel

1. The serial numbers are entered automatically, and click "Next" button.

Nero Back/Up and Burn - InstallShield(8) Wizard License Agreement Please read the following license agreement carefully. End-User License Agreement Software Products: Object of this agreement is the Nero software suite, comprising a selection of components, that varies with different sub types, as well as standalone applications and programs from the following list: Nero Burning ROM, Nero Express, InCD, InCD Reader, Nero StartSmart, Nero Toolkit, Nero CoverDesigner, Nero WaveEditor, Nero SoundTray, Nero Back3Hub, Nero Lives, Nero Live Gadget, Nero Vision, Nero Recode, Nero ShowTime, Nero Photosup, Nero Photosup Viewer, Nero MediaInfore, DTS Plugin, Blu-ray Video Plug-in, Gracanote Plug-in, SecureDisc Viewer, Nero RescueAgent, Nero DiscCopy Gadget, Nero BackUp & Burn ("Software") Licensor: Nero AG ("Nero") THIS IS A LEGAL AGREEMENT BETWEEN YOU. THE "END USER", AND NERO AG, DI ○ I accept the terms in the license agreement ○ I do not accept the terms in the license agreement < Back Next > Cancel

1. Please read the license agreement carefully, and click "Next" button if you agree.

Backup Program

Nesto BackUp and Burn - InstallShield(F) Wizard Setup Type Choose the setup type that best suits your needs. Please select a setup type. Complete All programs will be installed (requires the most hard drive space). Custom Choose which program features you want installed and where they will be installed. Recommended for advanced users. InstallShield: < Back Next > Cancel

New BackUp and Burn - InstallShield(R) Wizard Ready to install New BackUp and Burn This is ready to install the following: Click OK to begin the installation. If you want to run your 'manage copy' of your note on our settings, then Start. Click Next is set to OK! This Wizard OK

Newo BackItUp and Burn - InstallShield(II) Wizard Installing Nero BackItUp and Burn The programs and features you selected are being installed. Please wait while the InstallShield Wizard installs Nero BackItUp and Burn. This may take several minutes. Status: Copying new files InstallShield < Back Next > Cancel... Newo BackItUp and Burn - InstallShield(II) Wizard newo InstallShield Wizard Completed the installShield Wizard has successfully installed Nero BackItUp and Burn. Click it much to exit the sound.

1. After selecting the type of installation and click "Next" button.

2. Click "Install" button to begin the installation.

3. After program installation is complete and click the "Finish" button to finish the installation.

Backup Program

Backup With Nero BackItUp

With Nero BackItUp you can back up data. Click the Backup menu to start the desired backup task. The following backup tasks are available:

Autobackup

With Nero BackItUp, you can set up and configure Autobackup, the automatic backup feature. Once it has been set up, Autobackup is available on your computer's system tray and backs up specified folders in the background.

Setting up Autobackup is particularly useful when you want to carry out regular backups for the same files. The advantages are, e.g. that all the settings for the backup have already been configured and that there is no risk of forgetting a backup date or of not carrying out a backup as scheduled (as long as the computer is on).

File backup

If you choose a file backup, the individual files and folders that you select are backed up. If you want to back up the same files again later, a backup update makes it easier and saves resources and other things.

A file backup is useful to protect against data loss that can occur due to hardware damage or force majeure (fire, etc.). As a result, we recommend frequent backups so that you can restore data that is as current as possible in case of loss.

Drive backup

If you choose drive backup, entire drives (hard drives and / or partitions) are backed up, including the programs and the operating system. You can select the drives to be backed up. In contrast to file backups, drive backups restore programs and operating systems when restoring. So, a drive backup is useful to set up the whole operating system plus programs In case of hardware damage.

Verification

Nero BackItUp can be used to verify an existing backup. Nero BackItUp verifies whether or not the backup can be used for a successful restore process. During this process, data integrity is checked, and the backed up data is compared to the source data. If you carry out the verification right after the backup and have not modified any data in the meantime, you can use the feature to verify whether or not all data was backed up successfully (Data verification).

Backup Program

Autobackup

With Nero BackItUp, you can set up and configure the automatic Autobackup. Once it has been set up, Autobackup is available on your computer's notification area and backs up the folders that you specify in the background.

You can choose between two Autobackup options:

1. Activate Autobackup to automatically back up files and folders to local and external hard drives
2. Activate Autobackup with Nero Online Backup to automatically back up files and folders online.

The one Autobackup option stores the backup on a hard drive whereas the other Autobackup option uses the Internet service Nero Online Backup to store the backup online. When using Autobackup to store on a hard drive, you can define a backup schedule. The Autobackup that stores online does so automatically every time a change in the monitored folders takes place.

Caution - Autobackup formats the external or internal hard drive with the NTFS file system if it is formatted with another file system. In this case, all data on this drive will be lost.

Storing on Hard Drive With Autobackup

With Nero BackItUp you can set up and configure Autobackup to automatically back up files and folders to a local or external hard drive.

We recommend the drive to be empty. Once it has been set up, Autobackup is available in the Windows notification area. Autobackup regularly backs up all folders on all hard drives in a defined sequence. You can also choose individual folders and define your own time schedule.

Setting up Autobackup is particularly useful when you want to carry out regular backups. The advantages are, e.g. that all the settings for the backup have already been configured and that there is no risk of forgetting a backup date or of not carrying out a backup as scheduled (as long as the computer is on).

Caution - Use only hard drive with more than 4 GB

If you want to use an external hard drive which is not formatted with the NTFS file system, make sure that its space has more than 4 GB.

Formatting with the NTFS file system and thus using the Autobackup feature is not possible for some external hard drives (e.g. flash drive or USB stick) with a space less than 4 GB due to technical hard ware restrictions, and may cause serious problems on existing file system.

Backup Program

To set up Autobackup or change the settings, proceed as follows:

1. Connect the external hard drive you want to use as target. (We recommend it to be empty.)
2. Click the Backup > Autobackup menu. →The Autobackup - Options screen is displayed.

nero BackItUp & Burn Nero BackItUp Overview Autobackup Options Information Burn & Recover Burn CDs, DVDs, Blue-ray Docs Recover Last Data Calendar July 2008 Sun Mon Tue Wed Thu Fri Sat 24 29 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Information Activate Autobackup to automatically back up files and folders to local and external hard drives. Activate Autobackup with Hero Online Bedup to automatically back up files and folders online. Autobackup is the easiest way to satisfy store your most important data to local and external hard drives. All you need to do it to turn it on. Autobackup will automatically back up new and/or changed files in the original folder structure to provide very access. Backups are done by default every two hours and are kept for one day. Then the day's last backup is kept. After seven days the last backup of the week is archived. Hero's cutting-edge technology requires very little hard drive space yet offers full security for your data.

1. Select the appropriate Autobackup entry.

If Nero BackItUp does not detect an external empty hard drive, a window is opened which asks you how to proceed. To choose the target by yourself, click the No, select another target button.
The Autobackup - Select the target drive screen is displayed.

Backup Program

nero BackItUp & Burn Nero BackItUp Overview Status Target Settings Information Burn & Recover Burn CDs, DVDs, Blu-ray Discs Recover Lost Data Calendar July 2008 Sun Mon Tue Wed Thu Fri Sat 16 76 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Backup Restore Sync Tools Online Backup - Please select the target drive. Autobackup requires an HTTPS formatted drive to store the backup data. A drive that is not formatted in HTTPS format will be re-formatted and all the data on it will be lost. Before you can see the available hard drives attached to your computer. Select one of them as a target for Autobackup. The ideal target device is an empty external hard drive. Note: If your target is not displayed in the list below, press FS to refresh the view. Hi: Genel (recommended) This drive is recommended for Autobackups. It's an external hard disk that can be unconnected from this computer and provides more data security. D: Data (not recommended) This drive is not recommended because it is an internal drive and cannot be unconnected to provide more data security. C: de-i-w-60fhi3 (out recommended) This drive is not recommended because it is an internal drive and cannot be unconnected to provide more data security.

1. Select the desired target and click the → button.

The drive is formatted with the NTFS system. A progress window is opened and displays the progress made while formatting.

The Autobackup - Autobackup status screen is displayed.

nero BacklitUp & Burn Nero BacklitUp Overview Status Target Settings Information Details Hi Burn & Recover Burn CDs, DVTS, Blu-ray Discs Recover Lost Data Calendar July 2009 Sun Mon Tue Wed Thu Fri Sat 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Online Backup - Autobackup status Status Backup is starting in 117 seconds, if you want to change settings, press "Edit" button below Backup Now Target information Current target drive: Hi Gettel Remaining space on the target drive: 13.80 GB Edit Settings Default settings are used Edit

1. If you want to change the default settings regarding time schedule and folders to be backed up:

5.1. Click the Edit button in the Settings area.

The Autobackup - Define the settings screen is displayed.

Backup Program

5.2. Select the Use custom setting for time schedule and backup data option button.
5. 3. Enter the desired values in the Time schedule area. You can always set the values back to the default settings by clicking the Reset button.
5.4. Select the check boxes in the Backup data area for the folders you want to backup.
5.5. Click the button.
→ → The Autobackup - Autobackup status screen is displayed again.

1. If you want to manually start the first backup now, click the Backup Now button in the Status area.

→ The first full backup for the folders that you have specified is carried out. You can monitor the progress with the progress bar in the Status area.

1. Click the √ button.

→ The final screen is displayed. Autobackup has been set up and carries out the backup updates automatically due to the specified settings.

※Turn off Autobackup

If you want to turn off Autobackup, just click the 🔊 button in the Autobackup status screen.

Storing Online With Autobackup

With Nero BackItUp you can set up and configure Autobackup to automatically back up files and folders online, using the Internet service Nero Online Backup as a backup location.

Nero Online Backup offers you an online data storage (which is subject to charge).

The costs for the Internet connection and the costs for using the Internet service Nero Online Backup are the user's responsibility.

For more detail information, please refer to the S/W User Manual.

Backup Program

Backing Up Files

With Nero BackItUp you can carry out file backups. This means that individual files can be backed up and then restored at a later point in time. In comparison to drive backups, it is not possible to restore operating systems or programs with this option.

The first step is selecting files and folders to back up.

The next step is to select a target where to save the backup. You can save the backup on your hard drive or removable data media, burn them to a disc or use an online storage.

At last you can make settings according to your preferences.

To backup files, proceed as follows:

1. Click the Backup > File Backup menu.

The File Backup - Select what you want to backup screen is displayed.

nero BackItUp & Burn Nero BackItUp Overview Select source Select targets Finalize Information Nothing is selected. Burn & Recover Burn CDs, DVDs, Blu-ray Discs Recover Last Data Calendar July, 2009 Sun Mon Tun Wed Thu Fri Sat 18 25 36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Backup...Restore Sync Tools File Backup Step 1 - Please select what you want to backup Desktop 09. English Doctrans Computer de-c-w-604v3 (C:) Data (D:) DVD RW Drive (E:) HD DVD-ROM Drive (F:) DVD RW Drive (G:) Gretel (H:) Control Panel Network BU Name Size Nero BackItUp Autobackup_Local Autobackup status_en-U 1.84 MB BI Autobackup_Options_en-US 1.84 MB BI Autobackup_Select target_en-US 1.84 MB BI Autobackup_Settings_en-US 1.84 MB BI Online Autobackup_en-US 1.84 MB BI Start_screen_en-US 1.84 MB BI

1. Select the check box preceding the folder or the file that you want to add to the backup.

Select a folder in the left to show the contained files in the right.

The selected files are added to the backup.

1. Click the → button.

The File Backup - Please select targets screen is displayed

Backup Program

nero BackItUp & Burn Nero BackItUp Overview Select source Select targets Finishize Information Sources 1 Files, 6 folders selected 10 KB Burn & Recover Burn CDs, DVDs, Blu-ray Discs Recover Lost Data Calendar July, 2009 Sun Mon Tue Wed Thu Fri Sat 28 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 28 27 28 29 30 31 Add target Backup Restore Sync Tools File Backup Step 2 - Please select targets L. Target Selection Hart Disks Optics Disc Removable Devices Network Online Storage Path Browse... Add target

1. Click the icon that represents your desired target and specify the target in the drop-down menu.
2. Click the Browse button to specify the chosen target path.
3. If you want to back up to different targets, click the Add target button and repeat the two previous steps.
4. Click the → button.

The File Backup - Configure your backup screen is displayed

Backup Program

nero BackItUp & Burn Nero BackItUp Overview Select source Select targets Finalize Information Sources 1 Res. & folders selected 10 KB Burn & Recover Burn CDs, DVDs, Blu-ray Discs Recover Lost Data Calendar July 2009 Sun Mon Tue Wed Thu Fri Sat 78 28 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 20 27 28 29 30 31 3 4 5 6 7 8 File Backup Step 3 - Please configure your backup. Backup type and name Select backup type Full backup Backup name Nero 013 Define your time schedule Time schedule Weekly Edit Options Select compression Normal Select encryption None Password: Verify passwords Password hint: Enlore verify after backup Shutdown computer after backup Expert options

1. Enter a name for the backup in the Backup name input field.
2. If you want to schedule this backup or run it on a regular basis:

9.1. Select the backup schedule type in the Time schedule drop-down menu.
9.2. Click the Edit button if you want to specify the schedule.

The Define your time schedule window is opened.

9.3. Select the start date and other time settings that are appropriate to your backup schedule.
9.4. Select the backup type used for the following backups in the Select backup type drop -down menu.

1. Configure other settings as desired in the Options area.

2. If necessary, specify additional settings in the Expert Options area.

3. Click the √ button.

The file backup is carried out and the final screen is displayed. You can follow the process status in the task bar.

Backup Program

Backing Up Drives

With Nero BackItUp you can carry out drive backups. In contrast to file backups, drive backups restore programs and operating systems when restoring.

It is not possible to update a drive backup.

The first step is selecting a drive to back up.

The next step is to select a target where to save the backup. You can save the backup on your hard drive or removable data media, burn them to a disc or use an online storage. When you back up a drive, the backup file is usually quite large. If you burn the backup to disc, you will usually require multiple discs. The first backup disc is always a bootable disc. If you do not burn the backup to disc, it is still quite useful to create a bootable disc so that you can start the computer (and the drive restore) from CD / DVD in the event of an emergency.

At last you can make settings according to your preferences.

※ Administrator rights

You must have administrator rights in order to back up and restore hard drives and partitions.

1. Click the Backup > Drive Backup menu.
   The Drive backup - Select drives or partitions screen is displayed.
2. Select the check box preceding the drive or the partition that you want to add to the backup. Select a folder in the left to show the information in the right.
   The selected drives or partitions are added to the backup.
3. Click the → button.
   The Drive Backup - Select targets screen is displayed.
4. Click the icon that represents your desired target and specify the target in the dropdown menu.
5. Click the Browse button to specify the chosen target path.
6. If you want to back up to different targets, click the Add target button and repeat the two previous steps.
7. Click the → button.
   The Drive Backup - Configure your backup screen is displayed
8. Select a backup name in the Backup name field.
9. If you want to schedule this backup or run it on a regular basis:
   9.1. Select the backup schedule type in the Time schedule drop-down menu.
   9.2. Click the Edit button.
   The Define your time schedule window is opened.
   9.3. Select the start date and other time settings adequate to your backup schedule.
10. Configure other settings as desired in the Options area.
11. If necessary specify additional settings in the Expert Options area.
12. Click the button.
    →The drive backup is carried out and the final screen is displayed.
    You can follow the process status in the status bar.

※For more information about backup setting and backup type, please refer to the Backup SW User Manual provided in the external HDD.

Backup Program

With Nero BackItUp you can restore file backups. The content of the file backup is restored during this process. You can exclude individual files from the restore process or select specific files to be restored. It is even possible to choose a drive backup to restore individual files. In contrast to a drive backup restore process, a file backup does not allow the restore of programs or operating systems.

The first step is selecting files and folders to restore.

The next step is to select a path where to restore the backup and to make settings according to your preferences.

To restore a file backup, proceed as follows:

The Restore files and folders - Select files/folders from a backup or searched result to restore screen is displayed. The executed backups are displayed in the middle pane.

nero BackItUp & Burn Nero BackItUp Overview Select files/folders to restore Select restore target Burn & Recover Burn CDs, DVDs, Blue-ray Discs Recover Lost Data Calendar July, 2009 Sun Mon Tue Wed Thu Fri Sat 78 26 39 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Backup size: 2 KB Backup archive location: Hard disk Accessible: yes 20090710_133118_Ne Name Size Type Mod C Local Disk 1/16/5

1. Make the backup available:

2. 1. If the backup is located on a disc, insert the disc in a drive.
      2.2. If the backup has been saved to hard drive, network drive, or removable medium, ensure that your computer has access to the respective drive.

Backup Program

1. Select the desired backup.

The files and folders of the backup are displayed in the right area.

1. Select the check box preceding the folder or the file that you want to restore.

Select a folder in the left to show the contained files in the right.

1. Click the button.

The Restore files and folders - Please select restore options screen is displayed.

nero BackItUp & Burn Nero BackItUp Overview 1 Select files/folders to restore 2 Select restore target Burn & Recover Burn CDs, DVDs, Blu-ray Discs Recover Lost Data Calendar July, 2009 Sun Mon Tue Wed Thu Fri Sat 28 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Backup Restore Sync Tools Restore files and folders Step 2 - Please select restore options Restore path Restore to original path Migrate user specific folders to current user Restore to custom path Preserve original directory structure Restore path: How to resolve conflicts? Always replace local file Only replace order files Rename restored files Do not restore existing files Ask me for each file Move overwritten/replaced files to the Windows remote GH Vary after restore Expert options

1. If you want to restore the backup to the original path, select the Restore to original path option button.
2. If you want to migrate user specific folders, enable the Migrate user specific folders to current user check box.

Migrate user specific folders to current user refers to user-specific folders such as My Documents which will be restored to path of the user who is currently logged in. If you clear this check box then Nero BackItUp will restore the user-specific folders to the user path under which the backup was saved.

Backup Program

1. If you want to specify the path on which the backup will be restored yourself:

8.1. Select the Restore to custom path option button.
8.2. Click the Browse button.

The Browse For Folder window is opened.

8.3. Select the desired restore path and click the OK button.
The Browse For Folder window is closed and the selected path is transferred.
8.4. If you want to keep the original directory structure, enable the Preserve original directory structure check box.

1. Use the How to resolve conflicts option buttons to choose the action to take when a file to be restored is already (or is still) on the computer.
2. If necessary specify additional settings in the Expert Options area.
3. Click the √ button.

→The restore is carried out and the final screen is displayed. You can follow the process status in the task bar

Restore Drive Backup

※Administrator rights

You must have administrator rights in order to back up and restore hard drives and partitions. Only one single partition or one hard drive with all partitions can be restored during one restore process.

☐ → The Restore a drive - Select your partitions to restore screen is displayed. The executed backups are displayed in the middle pane.

1. Make the backup available:

2.1. If the backup is located on a disc, insert the disc in a drive.
2.2. If the backup has been saved to hard drive, network drive, or removable medium, ensure that your computer has access to the respective drive.

1. Select the desired backup.

☐ The drives and partitions of the backup are displayed in the right area. Partitions that were not part of the drive backup are grayed out.

1. Select the option button preceding the drive or partition that you want to restore.

Backup Program

5. Click the → button.

The Restore a drive - Select your restore target screen is displayed. The source partition and your selected target are shown.

1. If you want to restore the backup to the original hard drive, select the Restore to original hard drive option button.

2. If you want to restore the backup to another hard drive:

7.1. Select the Restore to another hard drive option button.
7.2. Click the icon that represents your desired target and specify the target in the dropdown menu.

1. If necessary specify additional settings in the Expert Options area (see Expert options→37).

2. Click the √ button.

→The restore is carried out and the final screen is displayed. You can follow the process status in the task bar.

Syncing With Nero BackItUp

Syncing Folders

With Nero BackItUp you can sync two folders.

The first step is to select two folders (a left folder and a right folder) for syncing.

The next and final step is to define your preferred settings.

To sync, proceed as follows:

1. Click the Sync > Create New menu.

The New Data Synchronization - Please select your left and right folder screen is displayed.

Netro Desktop KitUp & Burn - Netro DesktopUp Options Choose Folder Information: Helping your content. Back & Close Win-OS, 20% (None this) Remove all other items Cinder Next, Next Next, Next Next, Next Next, Next Next, Next Next, Next New Date Synchronization Show: - Purchased your Start-up Young Folder Left Folder: Remove... Right Folder: Remove...

Backup Program

1. Click the Left folder Browse button to choose the left folder.

2. Click the Right folder Browse button to choose the right folder.

3. Click the → button.

The New Data Synchronization - Finalize Settings screen is displayed.

nero BackItUp & Burn Nero BackItUp Overview Choose Folder Finalize Information 3 files, 6 folders selected 10 KB Burn & Recover Burn CDs. DVDs. Blu-ray Discs Recover Lost Data Calendar Sun Mon Tue Wed Thu Fri Sat 18 24 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 New Data Synchronization Step 2 - Finalize Settings Synchronization type and name Select a type: Menor Type a name: English Define your time schedule Time schedule: Once Edit Conflict handling Keep left file Keep right file Keep latest file Do not replace Always ask me what to do

1. Select a sync type in the Select a type drop-down menu.
2. Enter a name for the sync job in the Type a name input field.
3. If you want to schedule the sync job or to run it on a regular basis:

7.1. Select the sync schedule type in the Time schedule drop-down menu.
7.2. Click the Edit button if you want to specify the schedule.

The Define your time schedule window is opened.

7.3. Select the start date and other time settings that are appropriate to your backup schedule.

1. Choose your preferred conflict-handling option in the Conflict handling area.
2. Click the √ button.

The sync job is started and the final screen is displayed.

Backup Program

※ About Sync Types

Nero BackItUp has five sync types:

1. Mirror

The Mirror type synchronizes two folders.

New and updated files are copied from one folder to the other folder. Files that are deleted in one folder are also deleted in the other folder.

2. Copy

The Copy type copies new and updated files from the left to the right folder. Files that are deleted in the left folder are also deleted in the right folder.

3. Partial synchronization

The Partial synchronization type copies updated files from the right to the left folder. This sync type only deals with the same files, new files or deleted files will be ignored.

4. Update

The Update type has the same function as the Copy type with the exception that the Update type does not delete.

5. Partial mirror

The Partial mirror type has the same function as the Mirror type with the exception that the Partial mirror type does not delete.

Note - Nero BackItUp cannot identify changed or renamed files during the first run. The reason is that sync information is stored in a separate file and changes are compared to this information.

Troubleshooting

1. Once connected, the external HDD is recognized but not displayed.

[Reason] Vibration or impact damage the external hard disk, or bad power supply as other reasons may cause this problem.

[Major symptoms] "show only..."

[Solution] Insufficient power supply, connect using the USB-Y cable, or use the port back of the PC.

2. Files larger than 2 GB cannot be copied to the external HDD on Mac.

The partition of the external HDD is FAT 32. Set the partition to extended partition (HFS+) on

Mac OS. (Note: formatting will be lost data before, please back up first)

4. The formatted external HDD is recognized on Windows 2000 and XP but not on Windows 98SE and ME.

This is due to the difference in format type. Windows 98SE and ME support FAT 32 only, whereas Windows 2000 and XP support both FAT 32 and NTFS. Format as FAT 32 to enable recognition by all Windows systems.

5. Power is insufficient.

[Major symptoms]

Not recognized / Sometimes recognized / Tick sound heard / Data move failed /

Driver disappeared.

[Solution]

Connect directly to the rear of the PC.

6. How to management your date in external hard disk.

[Solution] No responsible for the loss of data. To prevent data loss, regularly use other backup storage devices.

7. The “Hi-Speed USB device is connected to a Non Hi-Speed USB hub” message is displayed.

This message is displayed when an external HDD is connected to a USB 1.1 host adapter (12 Mbps max) or if the USB driver is incorrect.

In this case, purchase a USB 2.0 hub or install the driver manually.

8. Check the sequence when the external driver does not work.

- Check whether the USB cable is connected correctly.

- Check the operation of LED.

- Check the driver recognition.

- Check if the internal motor of the external HDD works during operation.

- Check the normal operation of the USB port from the Control Panel in the following sequence: 1) Windows / XP / VISTA, Windows 7

Control Panel → System → Hardware → Device Manager → Common Parallel Bus Controller

9. S/W User manual and backup S/W are deleted.

- Download Method for User Manual & Backup S/W :

1. Connect to http://www.nero.com/lgehdd

2. Input the simple information (e-mail and name)

3. Click the Download button

Troubleshooting

10. Low Read/Write speed of USB3.0 Super Speed.

[Reason] No USB3.0 port due to the different PC or system, or no connect with USB3.0 port. OS or USB host drive was not the latest version may no support the fast speed.

[Solution] Using in the PC support USB3.0 interface and connect the USB3.0 port. Update OS and USB3.0 host drive system to latest version.

11. Pop-up 'high-speed USB3.0 connection, it can provide faster performance' message.

[Reason] Connect the USB3.0 external hard disk to USB2.0 or USB1.1 port.

[Solution] Using USB3.0 external hard disk in the PC which support USB3.0 interface or connect to the Host Card.

LG USB3.0 external hard disk can using in the USB2.0 or USB1.1 port.

LG Service Site

Asia (Country / Region)

Azerbaijan	http://www.lgservice.com
Bangladesh	http://www.lgservice.com
Brunei	http://www.lgservice.com
Cambodia	http://www.lgservice.com
China	http://china.lgservice.com
Hong Kong	http://hk.lgservice.com
India	http://in.lgservice.com
Indonesia	http://id.lgservice.com
Japan	http://jp.lgservice.com
Kazakhstan	http://kz.lgservice.com
Korea	http://www.lgservice.co.kr
Kyrgyzstan	http://www.lgservice.com
Macau	http://mo.lgservice.com
Malaysia	http://my.lgservice.com
Myanmar	http://www.lgservice.com
Nepal	http://www.lgservice.com
Philippines	http://ph.lgservice.com
Singapore	http://sg.lgservice.com
Sri Lanka	http://www.lgservice.com
Taiwan	http://www.lgservice.com
Tajikistan	http://www.lgservice.com
Thailand	http://th.lgservice.com
Turkmen	http://www.lgservice.com
Uzbekistan	http://www.lgservice.com
Vietnam	http://vn.lgservice.com

Africa (Country/Region)

Algeria	http://dz.lgservice.com
Angola	http://ao.lgservice.com
Benin	http://bj.lgservice.com
Botswana	http://www.lgservice.com
Burkina Faso	http://bf.lgservice.com
Cameroon	http://cm.lgservice.com
Canary Islands	http://cn.lgservice.com
Egypt	http://eg.lgservice.com
Ethiopia	http://et.lgservice.com
Gabon	http://ga.lgservice.com
Gambia	http://gm.lgservice.com
Ghana	http://gh.lgservice.com
Guinea	http://gn.lgservice.com
Ivory Coast	http://ic.lgservice.com
Kenya	http://ke.lgservice.com

Lesotho	http://www.lgservice.com
Liberia	http://lr.lgservice.com
Libya	http://www.lgservice.com
Madagascar	http://mg.lgservice.com
Mali	http://ml.lgservice.com
Mauritius	http://mu.lgservice.com
Morocco	http://ma.lgservice.com
Namibia	http://www.lgservice.com
Nigeria	http://ng.lgservice.com
Reunion	http://re.lgservice.com
Senegal	http://sn.lgservice.com
South Africa	http://za.lgservice.com
Sudan	http://www.lgservice.com
Swaziland	http://www.lgservice.com
Togo	http://tg.lgservice.com
Tunisia	http://tn.lgservice.com
Zimbabwe	http://zw.lgservice.com

Middle East (Country/Region)

Afghanistan	http://www.lgservice.com
Bahrain	http://bh.lgservice.com
Cyprus	http://cy.lgservice.com
Iran	http://ir.lgservice.com
Iraq	http://iq.lgservice.com
Israel	http://www.lgservice.com
Jordan	http://jo.lgservice.com
Kuwait	http://kw.lgservice.com
Lebanon	http://lb.lgservice.com
Oman	http://om.lgservice.com
Pakistan	http://pk.lgservice.com
Qatar	http://qa.lgservice.com
Saudi Arabia	http://sa.lgservice.com
Syria	http://sy.lgservice.com
Turkey	http://tr.lgservice.com
U.A.E.	http://ae.lgservice.com
Yemen	http://ye lgservice.com

Central & South America (Country/Region)

Argentina	http://ar.lgservice.com
Bolivia	http://www.lgservice.com
Brazil	http://br lgservice com

LG Service Site

Caribbean	http://www.lgservice.com
Chile	http://cl.lgservice.com
Colombia	http://co.lgservice.com
Costa Rica	http://cr.lgservice.com
Cuba	http://www.lgservice.com
Dominican Republic	http://dm.lgservice.com
Ecuador	http://ec.lgservice.com
El Salvador	http://www.lgservice.com
Guatemala	http://www.lgservice.com
Honduras	http://www.lgservice.com
Nicaragua	http://www.lgservice.com
Panama	http://pa.lgservice.com
Paraguay	http://www.lgservice.com
Peru	http://pe.lgservice.com
Uruguay	http://www.lgservice.com
Venezuela	http://ve.lgservice.com

North America (Country/Region)

Canada	http://ca.lgservice.com
Mexico	http://mx.lgservice.com
Puerto Rico	http://www.lgservice.com
U.S.A.	http://www.lgusa.com

Europe (Country/Region)

Albania	http://www.lgservice.com
Austria	http://www.lgservice.com
Belgium	http://be.lgservice.com
Bosnia-Herzegovina	http://www.lgservice.com
Bulgaria	http://bg.lgservice.com
Byelorussia	http://www.lgservice.com
Croatia	http://www.lgservice.com
Czech Republic	http://cz.lgservice.com
Denmark	http://dk.lgservice.com
Estonia	http://ee.lgservice.com
Finland	http://fi.lgservice.com
France	http://fr.lgservice.com
Germany	http://de.lgservice.com
Greece	http://gr.lgservice.com
Hungary	http://hu.lgservice.com
Iceland	http://is.lgservice.com
Ireland	http://ie.lgservice.com
Italy	http://italy.lgservice.com
Kazakhstan	http://kz lgservice com

Latvia	http://lv.lgservice.com
Lithuania	http://lt.lgservice.com
Luxembourg	http://lu.lgservice.com
Macedonia	http://www.lgservice.com
Moldova	http://www.lgservice.com
Netherlands	http://nl.lgservice.com
Norway	http://no.lgservice.com
Poland	http://pl.lgservice.com
Portugal	http://pt.lgservice.com
Romania	http://ro.lgservice.com
Russia	http://ru.lgservice.com
Serbia	http://www.lgservice.com
Slovakia	http://www.lgservice.com
Slovenia	http://www.lgservice.com
Spain	http://es.lgservice.com
Sweden	http://se.lgservice.com
Switzerland	http://www.lgservice.com
Ukraine	http://ua.lgservice.com
United Kingdom	http://gb.lgservice.com

Oceania (Country/Region)

Australia

http://au.lgservice.com

LG Electronics Inc.

Home page : www.lge.com.au Service site : http://au.lgservice.com Customer information centre 1800-LG-HELP(54-4357)

Fiji	http://www.lgservice.com
New Caledonia	http://www.lgservice.com
New Zealand	http://nz.lgservice.com
Papua New Guinea	http://www.lgservice.com