50SM - Lighting GVM - Free user manual and instructions

USER MANUAL 50SM GVM

Detailed Description 03

Usage

1. Connection between the Light Fixture and Power Supply .... 04
2. Installation and Detachment of Yoke 06
3. Installation and Detachment of Reflector 10
4. Installation of FL-35 Fresnel Lens and the Barndoor 11

Remote Control

1. ADDRESS/DMX 14
2. DMX Remote Control 17
   3.2.4G Remote Control 19
3. RDM Remote Control 20
4. LUMENRADIO Remote Control 21

Operating Instructions

1. Screen Interface Display Instructions 27......

① DAYLIGHT Key 27

1. EFFECT Key 28

2. MENU Key 42

①ADDRESS/DMX 42

②WIRELESS PROTOCOL 42

③ LUMENRADIO SETTINGS 42

④FAN CONTROL 43

⑤ROTATE SCREEN 44

Safety Precautions 49

Notice 49

General Fault Detection and Diagnosis 49

Product Includes 50

Evoke 1200 LED Spot Light

NANLUX

Product Diagram

Technical line drawing of a NANLUX optical instrument with no visible text or symbols on the device itself

Technical Data

Rated power: 1200W

Input voltage/current: DC48V/25A Max

AC100-240V 50/60Hz

CRI: 96

TLCI: 97

This manual applies to the light fixtures in 5600K and 3200K.

Product Details

NANLUX

1. Quick Release Device 11. Fix2034 2. Body Handle 3. Lock Catch 4. Eye Bolt 5. Yoke

12. Kipp Handle 6. Display 7. Function Keys 8. Left Knob 13. Right Knob 14. Wire Control Socket 9. USB Port 10. DMX IN 15. DC IN 16. DMX OUT

17. Power Supply Hanging Point 18. DC Power Output Socket 19. LED Indicator 20. Power Switch 21. AC Power Input Socket 22. Power Supply Handle NANLUX Evoke 1200 23. COB Protective Cap 24. Reflector NANLUX

Detailed Description

1. Quick release device: For quick installation and detachment of yoke.
2. NL mount: For installation of reflector or other NL mount accessories.
3. Lock catch: To lock or release the reflector or other accessories.
4. Eye Bolt: For hanging safety rope.
5. Yoke: Mount the fixture on a stand, pan and tilt.
6. Display: To display data.
7. Functions keys: Including DAYLIGHT, EFFECT, MENU and LOCK.
8. Left knob: For adjusting brightness and other parameters.
9. USB port: For updating firmwares or connecting USB cable to external devices with maximum current of 5V/1A.
10. DMX IN: DMX signal input interface.
11. Fixture body handle: Adjust the direction of the fixture.
12. Kipp handle: Tighten or release the tilt movement of the fixture on the yoke.
13. Right knob: For selecting options.
14. Wire control socket: Wire control Interface.
15. DC IN: DC power input interface.
16. DMX OUT: DMX signal output interface.
17. Power supply hanging point: For safely hanging the power supply.
18. DC power output socket: For connecting the fixture to the power supply with DC cable.
19. LED indicator: For determining the status of power input. Being on, power supply normal; Flashing or being off, power supply abnormal or no power input.
20. Power switch: To turn on/off the fixture.
21. AC power input socket: For connecting AC power supply.

NANLUX

1. Power supply handle: For lifting the power supply.
2. COB protective cap: When not using the fixture, cover with the cap for protection. (Note: Take off the cap before using.)
3. Reflector: For concentrating light to improve central illumination.

Usage

1. Connection between the Light Fixture and Power Supply

Technical line drawing of a device connected to a battery pack labeled NANLUX Evoke 1200, showing wiring and terminal connections (no text or symbols beyond labels)

NANLUX

▲Note:

①When connecting the power supply, please make sure the power, voltage and frequency are consistent with the provided power supply
② Make sure to use the provided power supply and power cable. The connection between the DC plug and the DC IN power input socket on the fixture should be connected as following.

Pin3 Pin2-Pin1+

Pin3 Pin1+Pin2-

Line drawing of a cylindrical electronic component with multiple ports (no text or symbols)

Pin1+: Connect with power supply +
Pin2-: Connect with power supply -
Pin3: Grounding wire

1. Installation and Detachment of Yoke

①Quick release yoke diagram

NANLUX

Quick release plate

The side with kipp handle The side with damping

Quick release plate mount Quick release lever lock catch Quick release lever

②Installation of Yoke (Method One)

Technical line drawing of a mechanical component with no visible text or symbols

Lay the light fixture, bottom up, on flat ground. Press the quick release lever lock catch to release it. Pull the quick release lever.

Line drawing of hands operating a mechanical device with a handle and lever (no text or symbols)

Technical line drawing of a mechanical assembly with mounting brackets and internal components (no text or symbols)

Align and insert the quick release plates to both mounts of the light fixture.

Technical line drawing of a mechanical assembly with no visible text or symbols

(Note: When installing the quick release plate, please adjust the plate to right directions, then insert them into the mount.)

NANLUX

Line drawing of a hand operating a mechanical device with arrows indicating motion (no text or symbols)

Firmly holding the yoke in place with one hand, pull the quick release lever with the other hand to lock the plate.

Line drawing of a hand operating a mounted device with a handle, no text or symbols present

Mount the yoke on heavy-duty light stand. Secure the fixture by locking the fastening screws on the stand.

Technical line drawing of a mechanical device with a vertical shaft and base mount (no text or symbols)

When removing the yoke, remove the fixture from the heavy-duty light stand first and lay it down on flat ground.

NANLUX

Line drawing of a mechanical device with hands operating it, no text or symbols present

Press the quick release lever lock catch of the fixture on both sides, then release the quick release lever to remove the fixture.

③Installation of Yoke (Method Two)

Line drawing of a hand adjusting a vertical mechanical component (no text or symbols)

Mount the yoke on heavy-duty light stand. Secure the fixture by locking the fastening screws on the stand.

Technical line drawing of a mechanical device with hands adjusting components (no text or symbols)

Press the quick release lever lock catch, pull the quick release lever, align and insert the quick-release plate mounts to the plates of the yoke.

NANLUX

Line drawing of a hand operating a mechanical device with a lever and adjustment knob (no text or symbols)

Pull quick release lever lock catch on both side of the fixture to lock the plates in place. Installation of the yoke is complete.

NANLUX

3. Installation and Detachment of Reflector

NANLUX NANLUX

When installing the reflector, align the reflector's bayonet lock to the light's mount, rotate the reflector clockwise and fasten the reflector on the light.
(Note: if the rotation is not smooth, pull the lock catch of the mount and rotate the reflector at the same time.)

NANLUX NANLUX

When removing the reflector, pull the lock catch of the mount, rotate the reflector anticlockwise and remove.

1. Installation of FL-35 Fresnel Lens and the Barndoor

▲ Note: When installing the Fresnel lens, please remove the fixture from the yoke first.

Technical line drawing of a circular fan or vent with radial heat dissipation, mounted on a base with two directional arrows indicating motion (no text or symbols present)

When installing the Fresnel lens, align and insert both quick-release mounts of lens to the quick-release plates of yoke.
(Refer to the installation and detachment of yoke)

Technical line drawing of a circular fan or fan device with internal grid pattern and mechanical components (no text or symbols)

Note: When installing the quick-release plates, adjust the plates to the right directions first, and then insert them to the mount.

Technical line drawing of a mechanical device with a hand operating the shaft (no text or symbols present)

Pull the quick release lever on both sides of the lens, then lock the quick-release plates in place and mount the lens on the yoke.

NANLUX

Diagram of hands operating a circular mechanical component with rotating arrows indicating rotation (no text or symbols)

When adjusting the lens to flood, hold the lens with hands and rotate it in the direction of the arrow, to adjust the light in flood.

Diagram of hands operating a circular mechanical component with rotating arrows indicating rotational motion (no text or symbols)

When adjusting the lens to spot, hold the lens with hands and rotate it in the direction of the arrow, to adjust the light in spot. (Beam angle: 11°-45°)

Technical line drawing of a mechanical device with internal components and directional arrows indicating assembly or alignment (no text or symbols present)

When mounting the fixture to the lens, align the fixture with the lens mount and rotate the fixture clockwise to lock the fixture in place.
(Note: if the rotation is not smooth, pull the lock catch of the mount and rotate the lens at the same time.)

Technical line drawing of a mechanical device with an arrow indicating motion, no visible text or symbols

When installing the barndoor, rotate the and release lock catch screw in front of the lens.

Slot Slot

Align the bardoor to the slots in front of the lens, and insert the it to the slots from up to down.

Lock

Release the bamdoor lock catch and lock the bamdoor screw.

Technical line drawing of a mechanical device with internal components and a close-up inset showing a cable or connector (no text or symbols present)

Put the safety loop on the barndoor into the eye bolt on the support frame of the lens.
NANLUX

NANLUX

Remote Control

. Evoke 1200 supports remote control via DMX, 2.4G, RDM and LUMENRADIO, and has built-in Bluetooth.

▲The ADDRESS needs to be set before operating the remote control via DMX, 2.4G, RDM and LUMENRADIO.

1. ADDRESS/DMX, including ADDRESS, DMX MODE and DMX DIMMING CURVE settings.

①ADDRESS

Press MENU key to access options.

MENU ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS

Left knob Right knob

DAYLIGHT EFFECT MENU LOCK

MENU ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS

Illustration of a hand holding a circular mechanical component before and after adjustment, showing rotational motion (no text or symbols)

MENU CH: 512 ADDRESS DMX MODE DMX DIMMING CURVE PRESS "MENU" TO RETURN ON

Rotate "Right knob" to ADDRESS/DMX. Press "Right knob" to enter the corresponding secondary menu.

MENU CH: 512 ADDRESS DMX MODE DMX DIMMING CURVE PRESS "MENU" TO RETURN

Illustration of a hand holding a circular mechanical component before and after press application (no text or symbols)

MENU CH: 512 ADDRESS 512 PRESS "MENU" TO RETURN

Rotate "Right knob" to ADDRESS. Press "Right knob" to enter the corresponding third menu.

MENU CH: 512 ADDRESS 512 PRESS "MENU" TO RETURN

Illustration of a hand holding a circular mechanical component before and after adjustment, showing rotational motion (no text or symbols)

MENU CH: 512 SET PRESS "MENU" TO RETURN

Rotate "Right knob" to select the desired ADDRESS number. Press the "Right knob" to set.
NANLUX

②DMX MODE

graph LR
    A["ADDRESS"] --> B["DMX MODE"]
    B --> C["DMX DIMMING CURVE"]
    C --> D["Press "MENU" TO RETURN ON"]
    E["DAYLIGHT 8bit"] --> F["ULTIMATE DMX 8bit"]
    G["MENU CH: 512"] --> H["Press "MENU" TO RETURN ON"]

Rotate "Right knob" to DMX MODE. Press "Right knob" to enter the corresponding third menu.

graph LR
    A["DAYLIGHT 8bit\nULTIMATE DMX 8bit"] --> B["UP/Down/Left/Right"]
    B --> C["SET"]
    C --> D["Ch: 512"]

Rotate "Right knob" to select the corresponding DMX mode. Press "Right knob" to set.
NANLUX

NANLUX

③DMX DIMMING CURVE

graph LR
    A["MENU CH: 512"] --> B["DMX DIMMING CURVE"]
    B --> C["→"]
    C --> D["LOGARITHM S CURVE"]
    D --> E["→"]

Rotate "Right knob" to DMX DIMMING CURVE. Press "Right knob" to enter the corresponding third menu.

graph LR
    A["MENU CH: 512"] --> B["EXPONET"]
    B --> C["LOGARITHM"]
    C --> D["S CURVE"]
    D --> E["PRESS "MENU" TO RETURN ON"]

    F["SET"] --> G["-->"]
    G --> H["-->"]

    style A fill:#000,stroke:#fff,color:#fff
    style B fill:#000,stroke:#fff,color:#fff
    style C fill:#000,stroke:#fff,color:#fff
    style D fill:#000,stroke:#fff,color:#fff
    style E fill:#000,stroke:#fff,color:#fff
    style F fill:#000,stroke:#fff,color:#fff
    style G fill:#000,stroke:#fff,color:#fff
    style H fill:#000,stroke:#fff,color:#fff

Rotate "Right knob" to select the corresponding DMX dimming curve. Press "Right knob" to set.

2. DMX Remote Control

①Connect the light fixture and the DMX512 console using the connection cable, as below.

DMX IN DMX OUT GND 1 NC DATA- 2 NC DATA+ 3 NC NC NC 1 GND 2 DATA- 3 DATA+

NANLUX

The connection between the light fixture and DMX/RDM console, light fixture and light fixture should use five core shielded cable. Make sure its diameter is not less than 0.3mm. XLR plug/socket and the wire should be connected as pictured.

- Pin1, Pin2, Pin3 for connecting DMX signal. Pin4, Pin5 has no connection.

▲NOTE: When connecting DMX, make sure the internal pin is not in contact with the inner case. The fixture can match the DMX512 (1990) control signal.

Plug of five-core and three-core XLR plug/socket conversion.

The fixture is supplied with five-core XLR plug. If using a three-core XLR plug, please follow the instructions below.

Five Pin Pin 1:GND(SCREEN) Pin 2:Signal(-) Pin 3:Signal(+) Pin 4:N/C Pin 5:N/C Three Pin Pin 1:GND(SCREEN) Pin 2:Signal(-) Pin 3:Signal(+)

②DMX Terminator

In DMX control mode, the DMX output of the last fixture should be connected with a DMX terminator (Not included). This prevents interference caused by DMX signals in the transmitting process. The terminator is connected with a 120(OHM) resistor across Pin 2 and Pin 3. (As shown below)

1 2 3 4 5 120Ω

DMX Terminator Connection Connect a 120Ω(OHM) resistor across Pin 2 and Pin 3 in an XLR plug and insert into the DMX OUT socket on the last unit.

③ Set the address of the fixture.

④Refer to the attached DMX reference guide and control the light via DMX/RDM console.

(For specific operation methods, please refer to the DMX/RDM console operation manual.)

Note: DMX reference guide «Evoke 1200 DMX REFERENCE GUIDE» please download it from www.nanlux.com.

3.2.4G Remote Control

- Set the address of the 2.4G remote controller to be consistent with the light fixture, enabling the Evoke 1200 to be remotely controlled by 2.4G remote controller or by APP via the transmitter box.

Note: ①2.4G remote controller and transmitter box are sold separately.

②The fixture supports the 2.4G wireless protocol V1.0 and V2.0. Set fixture to V2.0 while using WS-RC-C1 or WS-RC-C2 remote controller. Set fixture to V1.0 while using other remote controllers.

MENU CH: 512 ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS MENU CH: 512 2.4G WIRELESS PROTOCOL V1.0 V2.0 PRESS "MENU" TO RETURN ON

Rotate "Right knob" to WIRELESS PROTOCOL, press "Right knob" to enter the corresponding secondary menu.

MENU CH: 512 2.4G WIRELESS PROTOCOL V1.0 V2.0 PRESS "MENU" TO RETURN ON MENU CH: 512 SET PRESS "MENU" TO RETURN ON

Rotate "Right knob" to select V1.0 or V2.0, press "Right knob" to set.

NANLUX

4. RDM Remote Control

①Connect the light fixture to the console with RDM function using a connection cable, the connection method is the same as with a DMX/RDM console.
②Control the fixture via a console with RDM function. (For specific operation methods, please refer to the RDM console operation manual.)
Note: The UID format of the fixture is as follows:

graph TD
    A["0008 XXXX XXXX"] --> B["Serial number"]
    A --> C["0501: Evoke 1200"]
    A --> D["Manufacturer: Nanguang"]

NANLUX

5. LUMENRADIO Remote Control

- Evoke 1200 has built-in CRMX TIMO TWO module, enabling it to receive CRMX wireless DMX signals. The Specific operation is as follows:

①RECEIVER MODE

(1) RECEIVER MODE setting

Press the MENU key to access options.

MENU ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS

Left knob Right knob

DAYLIGHT EFFECT MENU LOCK

MENU ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS

Illustration of a hand holding a circular mechanical component before and after adjustment, showing rotational motion (no text or symbols)

MENU CH: 512 RADIO MODE UNLINK PRESS "MENU" TO RETURN ON

Rotate "Right knob" to LUMENRADIO SETTINGS. Press "Right knob" to enter the corresponding secondary menu.

NANLUX

graph LR
    A["Radio MODE"] --> B["UNLINK"]
    B --> C["RECEIVER MODE"]
    C --> D["TRANSMITTER MODE"]
    D --> E["MENU CH: 512"]

Rotate "Right knob" to RADIO MODE. Press "Right knob" to enter next menu.

graph LR
    A["RECEIVER MODE"] --> B["TRANSMITTER MODE"]
    B --> C["SET"]
    C --> D["MENU CH: 512"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

Rotate "Right knob" to select RECEIVER MODE. Press "Right knob" to set.

NANLUX

(2) UNLINK Setting

MENU CH: 512 RADIO MODE UNLINK PRESS "MENU" TO RETURN ON MENU CH: 512 DO YOU WANT TO UNLINK? NO YES PRESS "MENU" TO RETURN ON

Rotate "Right knob" to UNLINK. Press "Right knob" to enter next menu.

graph LR
    A["DO YOU WANT TO UNLINK?<br>NO YES"] --> B[" press &quot;MENU&quot; TO RETURN "]
    B --> C[" SET "]
    C --> D[" PRESS &quot;MENU&quot; TO RETURN "]

Rotate "Right knob" to select "YES". Press "Right knob" to set.

(3) Please refer to P26 of the manual or CRMX wireless DMX transmitter manual to connect the fixture or CRMX wireless DMX transmitter set to TRANSMITTER MODE with the fixture set to RECEIVER MODE, the fixture can receive CRMX wireless DMX signals for remote control.

Note: · CRMX wireless DMX transmitter is sold separately.

· In RECEIVER MODE, the LUMENRADIO SETTINGS should be set to UNLINK to allow it to be reconnected to new fixtures or transmitters.

②TRANSMITTER MODE

(1) Set the RADIO MODE to TRANSMITTER MODE and connect with the DMX/RDM console.

Rotate "Right knob" to RADIO MODE. Press "Right knob" to enter next menu.

Rotate "Right knob" to select TRANSMITTER MODE. Press "Right knob" to set.

NANLUX

NANLUX

(2) The fixture can set the RF OUTPUT POWER when in TRANSMITTER MODE. The setting methods is as follows:

MENU CH: 512 RADIO MODE RF OUTPUT POWER LINK PRESS "MENU" TO RETURN ON MENU CH: 512 20dBm 16dBm 11dBm 5dBm PRESS "MENU" TO RETURN ON

Rotate "Right knob" to OUTPUT POWER. Press "Right knob" to enter the next menu.

MENU CH: 512 20dBm 16dBm 11dBm 5dBm PRESS "MENU" TO RETURN ON MENU CH: 512 SET PRESS "MENU" TO RETURN ON

Rotate "Right knob" to select the desired RF OUTPUT POWER. Press "Right knob" to set.

(3) Set other fixtures that need to receive CRMX wireless DMX signals to RECEIVER MODE and set to UNLINK. (For setting method, please refer to P21.)

NANLUX

(4) Connect the fixture set in TRANSMITTER MODE with the fixture set in RECEIVER MODE.

When in TRANSMITTER MODE, the signal from the DMX/RDM console or DMX-based APP will be sent to the fixtures set to RECEIVER MODE.

The fixtures set to RECEIVER MODE should be set as follows:

graph LR
    A["MENU CH: 512"] --> B["RADIO MODE RF OUTPUT POWER LINK"]
    B --> C["PRESS "MENU" TO RETURN ON"]
    D["→"] --> E["UNLINK"]
    E --> F["→"]

Rotate "Right knob" to LINK. Press "Right knob" to enter the next menu.

graph LR
    A["MENU CH: 512"] --> B["LINK UNLINK"]
    B --> C["PRESS "MENU" TO RETURN ON"]
    C --> D["→"]
    D --> E["LINKING..."]
    E --> F["→"]
    F --> G["MENU CH: 512"]

Rotate "Right knob" to select LINK. Press "Right knob" to set.

(5) UNLINK Setting

When the fixture needs to stop transmitting the CRMX wireless DMX signal, set the fixture to UNLINK. The setting method is the same as the UNLINK setting on P23.

Operating Instructions

1. First, be sure that the power switch of the control unit is in the "off" position. Now it is safe to connect the power supply and power the unit on. If the power indicator is on that means the power supply is normal, the screen will display "NANLUX".

NANLUX Mode DAYLIGHT CH: 512 Powered by power supply Brightness 100.0% DIM Address Unlock/lock state Fan status

①DAYLIGHT Key: Press the DAYLIGHT key to enter the DAYLIGHT MODE, rotate the "Left knob", clockwise to increase brightness while counterclockwise to reduce the brightness. The screen shows the percentage of brightness, DIM range: 0.0-100.0%.

DAYLIGHT CH: 512 0.0% ... 100.0% 100.0% DIM DAYLIGHT CH: 512 0.0% DIM DAYLIGHT EFFECT MENU LOCK

Note: In other modes, the brightness adjustment range is the same as in DAYLIGHT mode. When the fixture function is unlock, in any mode, press the "Left knob", the light is off, the brightness percentage on the display is 0.0%. Press the "Left knob" again, the fixture restores the previous status. Press the "Left knob" continuously to switch brightness between on and off.

NANLUX

1. EFFECT Key: Press the EFFECT key to enter EFFECT MODE.

EFFECT MODE CH: 512 EFFECT: INT LOOP DIM: 0.0%-100.0% DECAY: 8s

Left knob Right knob

DAYLIGHT EFFECT MENU LOCK

- Evoke 1200 has built-in effects including: INT LOOP, FLASH, PULSE, STORM AUTO, STORM MANUAL, TV, PAPARAZZI, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION AUTO, EXPLOSION MANUAL and WELDING.

EFFECT MODE CH: 512 EFFECT: INT LOOP DIM: 0.0% - 100.0% DECAY: 8s

Hand holding a mechanical component with directional arrows indicating rotation (no text or symbols)

INT LOOP : WELDING EFFECT MODE CH: 512 EFFECT: WELDING DIM: 0.0% - 100.0% SPEED: 50 PAUSE: OFF

Rotate "Right knob" to select the desired special effect. Press "Right knob" to set.

①INT LOOP

For INT LOOP settings, rotate "Right knob" to select DIM and SPEED (Range: 2S-30S), then rotate "Left knob" to set the corresponding parameters.

EFFECT MODE CH: 512 EFFECT: INT LOOP DIM: 0.0% - 100.0% DECAY: 8s

Illustration of a hand holding a circular mechanical component with directional arrows indicating rotation (no text or symbols)

EFFECT MODE CH: 512 EFFECT: INT LOOP DIM: 0.0% - 100.0% DECAY: 8s

Rotate "Right knob" to select DIM and SPEED.

EFFECT MODE CH: 512 EFFECT: INT LOOP DIM: 0.0% - 100.0% DECAY: 8s

Hand holding a mechanical component with an arrow indicating rotation (no text or symbols)

EFFECT MODE CH: 512 EFFECT: INT LOOP DIM: 0.0% - 99.9% DECAY: 8s

Rotate "Left knob" to set the corresponding parameters.

②FLASH

For FLASH settings, rotate "Right knob" to select DIM, INTERVALS (Range: 0.1s-10.0s) and FLASH RATIO (Range: 0% -100%), then rotate "Left knob" to set the corresponding parameters.

Rotate "Right knob" to select DIM, INTERVALS and FLASH RATIO.

Rotate "Left knob" to set the corresponding parameters.

③PULSE

For PULSE settings, rotate "Right knob" to select DIM and PULSES/MIN (Range: 1-240), then rotate "Left knob" to set the corresponding parameters.

EFFECT MODE CH: 512 EFFECT: PULSE DIM: 100.0% PULSES/MIN: 40

Illustration of a hand holding a circular mechanical component with directional arrows indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: PULSE DIM: 100.0% PULSES/MIN: 40

Rotate "Right knob" to select DIM and PULSES/MIN.

EFFECT MODE CH: 512 EFFECT: PULSE DIM: 100.0% PULSES/MIN: 40

Hand holding a mechanical component with rotational arrow indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: PULSE DIM: 100.0% PULSES/MIN: 41

Rotate "Left knob" to set the corresponding parameters.

④STORM AUTO

For STORM AUTO settings, rotate "Right knob" to select DIM, INTVL RANGE (Range: 1s-60s), then rotate "Left knob" to set the corresponding parameters.

EFFECT MODE CH: 512 EFFECT: STORM AUTO DIM: 100.0% INTVL RANGE: 2s - 6s

Illustration of a hand holding a circular mechanical component with directional arrows indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: STORM AUTO DIM: 100.0% INTVL RANGE: 2s - 6s

Rotate "Right knob" to select the DIM and INTVL RANGE.

EFFECT MODE CH: 512 EFFECT: STORM AUTO DIM: 100.0% INTVL RANGE: 2s - 6s

Illustration of a hand holding a mechanical component with directional arrows indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: STORM AUTO DIM: 100.0% INTVL RANGE: 3s - 6s

Rotate "Left knob" to set the corresponding parameters.

⑤STORM MANUAL

NANLUX

For STORM MANUAL settings, rotate "Right knob" to select DIM, then rotate "Left knob" to set the corresponding parameters and press "Right knob" to trigger storm.

EFFECT MODE CH: 512 EFFECT: STORM MANUAL DIM: 100.0% PRESS UP KNOB TO TRIGGER

Rotate "Right knob" to select DIM.

Illustration of a hand holding a circular object with directional arrows indicating rotation (no text or symbols)

EFFECT MODE CH: 512 EFFECT: STORM MANUAL DIM: 100.0% PRESS UP KNOB TO TRIGGER ON

EFFECT MODE CH: 512 EFFECT: STORM MANUAL DIM: 100.0% PRESS UP KNOB TO TRIGGER ON

Rotate "Left knob" to set the corresponding parameters.

Hand holding a mechanical component with an arrow indicating rotation (no text or symbols)

EFFECT MODE CH: 512 EFFECT: STORM MANUAL DIM: 99.9% PRESS UP KNOB TO TRIGGER ON

EFFECT MODE CH: 512 EFFECT: STORM MANUAL DIM: 99.9% PRESS UP KNOB TO TRIGGER ON

Press "Right knob" to trigger storm.

⑥TV

For TV settings, rotate "Right knob" to select DIM and SPEED (Range:1-100). Then rotate "Left knob" to set the corresponding parameters.

EFFECT MODE CH: 512 EFFECT: TV DIM: 0.0% - 100.0% SPEED: 50

Illustration of a hand holding a circular mechanical component with directional arrows indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: TV DIM: 0.0% - 100.0% SPEED: 50

Rotate "Right knob" to select the DIM and SPEED.

EFFECT MODE CH: 512 EFFECT: TV DIM: 0.0% - 100.0% SPEED: 50

Hand holding a mechanical component with an arrow indicating rotation (no text or symbols)

EFFECT MODE CH: 512 EFFECT: TV DIM: 0.0% - 99.9% SPEED: 50

Rotate "Left knob" to set the corresponding parameters.

NANLUX

⑦PAPARAZZI

For PAPARAZZI settings, rotate the "Right knob" to select DIM and SPEED (Range:1-100), then rotate "Left knob" to set the corresponding parameters.

EFFECT MODE CH: 512 EFFECT: PAPARAZZI DIM: 100.0% SPEED: 50

Illustration of a hand holding a circular mechanical component with directional arrows indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: PAPARAZZI DIM: 100.0% SPEED: 50

Rotate "Right knob" to select the DIM and SPEED.

EFFECT MODE CH: 512 EFFECT: PAPARAZZI DIM: 100.0% SPEED: 50

Hand holding a mechanical component with rotational arrow indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: PAPARAZZI DIM: 100.0% SPEED: 51

Rotate "Left knob" to set the corresponding parameters.

⑧CANDLE/FIRE

For CANDLE/FIRE settings, rotate "Right knob" to select DIM and SPEED (Range: 1-100), then rotate "Left knob" to set the corresponding parameters.

Rotate "Right knob" to select the DIM and SPEED.

Rotate "Left knob" to set the corresponding parameters.

⑨BAD BULB

For BAD BULB settings, rotate "Right knob" to select DIM, INTENSITY (Range: 1-100) and SPEED (Range: 1-100), then rotate "Left knob" to set the corresponding parameters.

Rotate "Left knob" to set the corresponding parameters.

⑩FIREWORK

For FIREWORK settings, rotate "Right knob" to select DIM and SPEED (Range: 1-100) and DECAY (Range: 1-100), then rotate "Left knob" to set the corresponding arameters.

Rotate "Right knob" to select DIM, SPEED and DECAY.

Rotate "Left knob" to set the corresponding parameters.

⑪ EXPLOSION AUTO

For EXPLOSION AUTO settings, rotate "Right knob" to select DIM, SPEED (Range:1-100) and DECAY (Range:1-100), then rotate "Left knob" to set the corresponding parameters.

Rotate "Right knob" to select DIM, SPEED and DECAY.

Rotate "Left knob" to set the corresponding parameters.

⑫ EXPLOSION MANUAL

NANLUX

For EXPLOSION MANUAL settings, rotate "Right knob" to select DIM and DECAY (Range: 1-100), then rotate "Left knob" to set the corresponding parameters. Press "Right knob" to trigger EXPLOSION.

EFFECT MODE CH: 512 EFFECT: EXPLOSION MANUAL DIM: 100.0% DECAY: 50 PRESS UP KNOB TO TRIGGER PRESS UP KNO

Hand holding a circular mechanical component with directional arrows indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: EXPLOSION MANUAL DIM: 100.0% DECAY: 50

Rotate "Right knob" to select DIM and DECAY.

EFFECT MODE CH: 512 EFFECT: EXPLOSION MANUAL DIM: 100.0% DECAY: 50 PRESS UP KNOB TO TRIGGER

Illustration of a hand holding a mechanical component with directional arrows indicating motion (no text or symbols)

EFFECT MODE CH: 512 EFFECT: EXPLOSION MANUAL DIM: 100.0% DECAY: 51

Rotate "Left knob" to set the corresponding parameters.

EFFECT MODE CH: 512 EFFECT: EXPLOSION MANUAL DIM: 100.0% DECAY: 51 PRESS UP KNOB TO TRIGGER

Press "Right knob" to trigger EXPLOSION.

⑬WELDING

For WELDING settings, rotate "Right knob" to select DIM, SPEED (Range: 1-100) and PAUSE (ON/OFF), then rotate "Left knob" to set the corresponding parameters.

Rotate "Right knob" to select DIM, SPEED and PAUSE.

Rotate "Left knob" to set the corresponding parameters.

NANLUX

1. MENU Key: Press the MENU key to enter the menu.

MENU ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS

Left knob Right knob

DAYLIGHT EFFECT MENU LOCK

- Rotate "Right knob" to select the setting item and press "Right knob" to enter the corresponding secondary menu. Then rotate "Right knob" again to select corresponding options and press "Right knob" to set. Press the MENU key to return to the previous menu.

①ADDRESS/DMX

For more operation details please refer to P14.

②WIRELESS PROTOCOL

For more operation details please refer to P19.

③LUMENRADIO SETTINGS

For more operation details please refer to P21.

④FAN CONTROL

MENU CH: 512 ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS ON MENU CH: 512 ON OFF PRESS "MENU" TO RETURN ON

Rotate "Right knob" to FAN CONTROL. Press "Right knob" to enter the corresponding secondary menu.

graph LR
    A["ON"] --> B["SET"]
    C["OFF"] --> B
    D["PRESS "MENU" TO RETURN"] --> E["ON"]

Rotate "Right knob" to select the fan ON or OFF. Press the "Right knob" to set.

Note: 1. The light output is in 100% if turn on the fan.

1. The light output is in 10% if turn off the fan.

⑤ROTATE SCREEN

MENU CH: 512 ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS MENU CH: 512 Do you want to rotate screen NO YES PRESS "MENU" TO RETURN ON

Rotate "Right knob" to ROTATE SCREEN. Press "Right knob" to enter the corresponding secondary menu.

graph LR
    A["Do you want to rotate screen NO YES"] --> B["SET"]
    B --> C["Ch: 512"]

Rotate "Right knob" to select YES or NO. Press "Right knob" to set.
NANLUX

⑥SCREEN BRIGHTNESS

MENU CH: 512 ADDRESS/DMX WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS MENU CH: 512 SCREEN BRIGHTNESS 1 PRESS "MENU" TO RETURN ON

Rotate "Right knob" to SCREEN BRIGHTNESS. Press "Right knob" to enter the corresponding secondary menu.

graph LR
    A["SCREEN BRIGHTNESS\n1\nPRESS "MENU" TO RETURN"] --> B["SET"]
    B --> C["MENU\nCH: 512"]

Rotate "Right knob" to select SCREEN BRIGHTNESS. Press "Right knob" to set.
NANLUX

⑦BUTTON BACKLIGHT

MENU CH: 512 WIRELESS PROTOCOL LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS BUTTON BACKLIGHT ON MENU CH: 512 ON OFF PRESS "MENU" TO RETURN ON

Rotate "Right knob" to BUTTON BACKLIGHT. Press "Right knob" to enter the corresponding secondary menu.

graph LR
    A["ON"] --> B["OFF"]
    C["PRESS "MENU" TO RETURN"] --> D["SET"]
    E["CH: 512"] --> F["Ch: 512"]

Rotate "Right knob" to select ON or OFF. Press the "Right knob" to set.
NANLUX

⑧LANGUAGE

MENU CH: 512 LUMENRADIO SETTINGS FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS BUTTON BACKLIGHT LANGUAGE MENU CH: 512 ENGLISH 简体中文 PRESS "MENU" TO RETURN ON

Rotate "Right knob" to LANGUAGE. Press "Right knob" to enter the corresponding secondary menu.

MENU CH: 512 ENGLISH 简体中文 PRESS "MENU" TO RETURN ON MENU CH: 512 已设置 PRESS "MENU" TO RETURN ON

Rotate "Right knob" to select ENGLISH or 简体中文. Press "Right knob" to set.
NANLUX

NANLUX

⑨VERSION

MENU CH: 512 FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS BUTTON BACKLIGHT LANGUAGE VERSION

Illustration of a hand holding a circular mechanical component with rotation arrows, no text or symbols present

MENU CH: 512 VERSION: 0.01.02 To upgrade, please switch off the light, plug in USB drive that has new firmware, and restart the light. www.nanlux.com PRESS "MENU" TO RETURN

Rotate "Right knob" to VERSION. Press "Right knob" to check the current version.

1. Lock Key: Press and hold the "Lock Key" to lock all functions. Operation key or adjustment knobs can not change the current function. Press and hold the Lock key again to release the Lock status.

DAYLIGHT CH: 512 100.0% DIM DAYLIGHT CH: 512 100.0% DIM LOCK Status DAYLIGHT EFFECT MENU LOCK

1. When the fixture is not in use, please turn off the power switch.

Safety Precautions

NANLUX

1. Please open the package to check for possible damage. If damaged, do not use. Please contact your distributor or the manufacturer as soon as possible.
2. Please do not use power cable which are faulty or have insulation damage. Please be careful when unplugging and do not drag the power cable.
3. Before installation, please make sure the power supply voltage is correct and compatible with that specified on fixture.
4. Please turn off the power when fixture is not in use or being cleaned.
5. Please operate the fixture safely. Keep fixture away from children.

Notice

1. When the fixture is turned on, do not look directly at the emitter.
2. Please do not leave flammable or explosive articles within 0.5m of the fixture.
3. Weather resistance lamps refers to rainproof or anti-spraying, NOT submersible or underwater use. Please do not submerse the lamp in water. If you find damage on the lamp or cable, please do not put the lamp and cable close to or contact with water.
4. Avoid placing lamps near flammable and volatile substances, such as alcohol or gasoline.
5. When cleaning the fixture, please use soft cloth with neutral detergent to wipe off dirt. Please do not use abrasives or strong detergent.
6. As accessories such as lenses and softboxes are heavy, please hold the handle securely when detaching or adjusting beam directions.
7. During use, do not cover, restrict or obstruct ventilation holes, so as not to affect the heat dissipation and cause damage to the fixture. Please take care when using the lamp for long periods, as the surface temperature can be high.
8. Please do not disassemble the fixture or attempt to carry out repairs. Any required maintenance should be carried out by suitably qualified professionals, operating in strict compliance with the instructions described in this manual.

■ General Fault Detection and Diagnosis

Fault Detection	Diagnosis
The light won't boot up properly	Please check that the power supply, cable and outlet are properly connected and that the cable is not faulty or loose.Please check wether the voltage value is within the specified parameters.
The fixture can be operated manually,but DMX control is not working.	Please check whether the DMX original address setting of the fixture is correct.Please check that the XLR signal cable is connected correctly and that it is not faulty or damaged.
LCD display is on, but light cannot be operated.	Please check if the LCD display shows " 🔒".Press and hold the "LOCK" key for 2s to release the LOCK.
The fan doesn't work	Please check if the fan is OFFIf the screen displays "Fan abnormal", please contact place of purchase.
The signal reception distance of 2.4 andBluetooth is less than 5 meters.	Check whether the LUMENRADIO is in TRANSMITTER MODE, if it is, please disconnect the LUMENRADIO and set it in RECEIVER MODE.

What's in the box? Please kindly check.

NANLUX

Evoke 1200 ×1 Yoke ×1 Power Supply ×1
				Reflector ×1
Connecting cable 5M ×1	Power cable 4.5M ×1 DMX Reference Guide ×1USB Flash Drive ×1				User Manual ×1 Thank-you Card ×1

This manual and all stats within it were produced under controlled conditions, and are accurate at time of print. Any future changes to design/technical data can be found at www.nanlux.com.

Version: V2 2021-06-22

[phone]

[phone]

[e-mail]

Zhanglin,324,Dongli Chenghai Shantou Guangdong China

Guangdong NanGuang Photo&Video Systems Co., Ltd