95-5860G - Kit voiture Metra - Free user manual and instructions

USER MANUAL 95-5860G Metra

Interior view of a car dashboard with air filters and a digital display (no visible text or symbols)

Ford E-Series Cutaway 2021

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications

KIT FEATURES

• Textured trim panel designed to cover minor dash modifications.
• DDIN brackets provide stable mounting points
• Painted gray

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Speed clips (4) • D) Panel clips (4) • E) #10 x 3/4" Phillips screws (4)

AE

Simple line drawing of a rectangular frame with internal cutouts and mounting holes (no text or symbols)

• 

• 

• 

• 

TABLE OF CONTENTS

Dash Disassembly 2

Kit Preparation 2

Kit Assembly 3

WIRING & ANTENNA CONNECTIONS (sold separately)

Visit metraonline.com for audio and steering wheel interface options.

Antenna adapter: 40-EU10

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver
• Socket wrench • Cutting tool

Attention! With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product.

DASH DISASSEMBLY KIT PREPA

1. Remove the radio using the Metra 86-9001 radio removal tools. If you do not have removal tools, the factory dash panel can be removed with the radio attached and then the radio can be removed from the dash.
2. Unsnap and remove the dash panel. (Figure A)
3. Bend the factory rear support back to make room for traditional DDIN radios depth. (Figure B)
4. Cut the pocket out of the factory dash panel. (Figure C)

Continue to Kit Preparation

Line drawing of a car dashboard and steering wheel (no text or symbols)

(Figure A)

Technical diagram of a mechanical assembly with no visible text or symbols

(Figure B)

Remove shaded area

(Figure C)

TION

1. Place the (4) speed clips into the sub dash. (Figure A)
2. Attach the (4) supplied panel clips to the radio trim panel. (FigureB)

Continue to Kit Assembly

Technical line drawing of a vehicle chassis frame with mounting brackets and structural components (no text or symbols)

(Figure A)

Technical line drawing of a rectangular frame with mounting holes and dashed alignment lines (no text or symbols)

(Figure B)

KIT ASSEMBLY

1. Attach the radio brackets to the radio using screws supplied with the radio. (Figure A)
2. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
3. Secure the radio to the sub-dash using the supplied screws. (Figure B)

Technical diagram of an electronic device with labeled components and directional arrows indicating assembly or flow.

Technical diagram of a vehicle interior showing dashboard and engine components (no text or labels)

(Figure B)

1. Prior to completing assembly, it may be a good idea here to place the dash panel over the radio and snap the radio trim panel to be sure the radio does not need adjustments. (Figure C)
2. Re-assemble the factory dash panel then snap the radio trim panel over the radio to complete the install.

Interior view of a car dashboard with control panel and directional arrow (no text or symbols)

(Figure C)(Figure A)

Having difficulties? We're here to help.

our Tech Support line at:

386-257-1187

mail at:

[e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills b enselling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.edu or call

366-672-5171 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

Interior view of a car dashboard with air filters and a digital display (no visible text or symbols)

Three black plastic enclosures: front, side, and top (no text or symbols visible)

HARDWARE INCLUDED

Line drawings of mechanical components or parts, no text or symbols present

Ford E-Series Cutaway 2021

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications.

DDIN brackets provide stable mounting points

Painted gray

- Textured and painted trim panel designed to cover modifications to the factory dash panel for fitting of a DDIN radio.

KIT COMPONENTS

• Radio trim panel
• Radio brackets
• Speed clips (4)
• Panel clips (4)

• 10 x 3/4" Phillips screws (4)

WIRING & ANTENNA CONNECTIONS

(sold separately)

Visit metraonline.com for audio and steering wheel interface options.

Antenna adapter: 40-EU10

SALES 386-257-2956