ALF4129I - Washing machine ASPES - Free user manual and instructions

USER MANUAL ALF4129I ASPES

Simple line drawing of a bag with patterned design (no text or symbols)

Simple line drawing of a hand pouring liquid into a container (no text or symbols)

Diagram showing four clothing items with symbols: a circle, an X, a circle, and an X, likely indicating selection or warning.

Diagram showing a cross-section of a biological or geological structure with an inset close-up of a layered structure (no text or symbols)

Simple line drawing of a person's legs and shoulders with directional arrows indicating movement (no text or symbols)

Simple line drawing of a globe with a cross symbol, no text or labels present

Simple line drawing of three faucet symbols (no text or labels)

Illustration of a single washing machine with front panel and side door (no text or symbols)

Distintas funciones

Line drawings of three household appliances: a faucet, a bowl with steam, and a washing machine (no text or symbols)

Illustration of a washing machine operation showing hand positioning and cooling mechanism (no text or symbols)

Symbol of a trash bin crossed with diagonal lines, no text or numbers present

Front Loading Washing Machine

Model: ALF4137I

ALF4184I

ALF4184XI

ALF4129I

Content

Safety Notifications 2

Part Name 3

Installation Instruction 4

Methods of Door Lock and Remove 9

The Usage Method of the Detergent Box 9

Function Introduction of Operating Panel 10

The Introduction of Function and Program 11

The Introduction of Washing Programs 14

Maintenance 15

Varieties of Functions 17

Notice before Washing 17

Non-fault Conditions 19

Troubleshooting Guide 20

Specification 20

WARNING

- This appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capabilities,or lack of experience and knowledge, unless they hare been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children of less than 3 years should be kept away unless continuously supervised.

- If the supply cord is damaged. it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

- The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.

- This appliance is intended to be used in household and similar applications.

- Manual loss, Call our service number.

• Water pressure:0.03-1Mpa.

- CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Safety Notifications (Please Must Follow)

- In order to prevent the harm or damage to the user or the person and property of others, please make sure to follow the safety issues.

Warnings

● The risk of electric shock.

1. Please use 220V-240V, above 10A with ground wire dedicated socket.
2. When inserting and pulling out the power cord please use the plug, please.
   Don't use the damaged power cord. When the power cord pin is dirty please wipe clean with dry cloth in time.
   3.Do not use the wet hand to insert or pull out the plug.
3. Please pull out the plug when finishing, repairing or cleaning.

● The danger of fire and current leakage
1. Do not allow the washing machine close to the fire, or lighted cigarettes, candles and volatile materials.
2. Please do not sprinkle the water on the control panel of washing machine.
3. Please do not put the washing machine in the place of wet and outside place.
4. Please fix the drain pump and make sure the sewer unobstructed.

● The danger of high temperature

1. When washing in high temperature, the door glass will be heating. Please do not touch the door glass, especially children.

2. When opening the door after high temperature washing, please wait for the temperature cooled down to a safe level and the door will unlocked automatically.

● The danger of getting hurt

1. Please handle the carton box after removing, don't let the children touch or eat.

2.Do not allow the children to operate or climb up to the washing machine.

1. Please close the door after use to avoid the children enter into the drum.

● The danger of injury

1. Do not put any heavy things on the top of the washing machine.
2. If you want to move the machine, please remember ask for help.
3. Please do not ask unprofessional people to repair the machine.

● The danger of damage the cloths

1. Please do not wash the cloths which is waterproof, like Raincoat, feather products, sleeping bags

2. Please wash the cloths which can be washed, if you have any doubt, please following the instructions.

● The danger of explosion

1. Please do not washing the cloths which stained with kerosene, gasoline, thinner, inflammable goods.

2. Please do not washing when gas leakage.

- When pull out the plug, the lock can be unlock even if there is lot of water inside.

So please check the water level inside before unlock the door in order to avoid the unnecessary loss.

Part name

Attachment specification

user manual	water supply hose	wrench	transportation bolt caps

Part name

Part Name Inlet valve Operation panel Detergent box Power line Door assembly Wash and spin tub Cabinet Adjustable feet Notice : 1.the first use may drain

The above picture is just for reference, the detailed information should be based on the real product!

Notice :

1. the first use may drain some water out. It's residual water after performance test, belong to the normal phenomenon.

2. After each use, please pull the plug and turn off the faucet to prevent accidental flood or fire.

Installation instruction

● Make sure the temperature of the places where the washer is installed or placed above 0^ C or put it outside.
- Place the washer correctly according to management standards and regulations.
- Keep the base of washer ventilated when it is placed on the ground with carpet.
- There are too much pests in villages. Please keep the surroundings clean because any damages caused by cockroaches or other pests don't belong to warranty.

Transportation bolt

Washers are installed with transport bolt to prevent internal damage in transit.

Dismantle the transportation bolt

1. In order to prevent internal damage in transit, 4 bolts are installed. Before using the washer, dismantle the bolt. (see chart I)

- If the bolts are not dismantled, violent vibration, noise and trouble will be caused.

1. Use the attached wrench to loosen the 4 bolts. (see chart 2)

2. Twist the bolt rubber slightly and then pull out the bolts, keep the bolts and wrench as standby.(see chart 3)

● The bolts should be remounted no matter when to transport the washer.

1. Use attached stopples to seal the screw holes. (see chart 4)

graph TD
    A["see chart 1"] --> B["see chart 2"]
    B --> C["see chart 3"]
    C --> D["see chart 4"]
    D --> E["see chart 4"]
    style A fill:#f9f,stroke:#333
    style B fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333
    style D fill:#f9f,stroke:#333
    style E fill:#f9f,stroke:#333

Requires for positions

Horizontal adjustment:

● The slant angle should be less than 1 degree.
Power outlet
● The distance between any side of washer and power outlet should be within 1.5 meters.
- Don't use too many electrical appliances in one outlet.

Environment cleaning

• It's necessary to clean the wall, door and ground.
  ● Install the washer on a hard and steady ground with floor drain rather than soft blanket or wooden floor.
• Don't put dirty clothes or some other goods on a washer's head cover, otherwise it may impact the normal operation.

Notice

Power connection

1. Don't use the wiring board or something like that.
2. If the power lines are damaged, please contact professionals to repair.
3. After the use of washer, pull the plug and turn the tap off.
4. Connect the washer with grounded outlet to correspond to the wiring principles.

5. Place the washer in which is easy to connect the outlet.

6. Contact the maintenance center and ask professionals to repair the washer. Laypeople may cause damages and troubles on the washer.

7. Don't put the washer in the place where the temperature is below zero. The pipes will be frozen and break. Moreover, the temperature below zero will damage the programming controller.
8. If move the washer in an environment whose temperature is below zero, please keep the washer at room temperature for a few hours before starting it.

Grounding introduction

• A washer must have the grounding devices. If a trouble happens, the device can reduce the risk of electrical shock. The device is equipped with a cable (including a wire and a grounded plug). The grounded plug must be inserted in an appropriate outlet. If you want to know if the washer is grounded correctly, please contact with professional maintenance staff. If the plug can't match with the outlet, please don't change the plug by yourself.
• Once your washer smokes or emits an odor, please cur the power and contact with professional maintenance staff.

Drain pipe Wash tub About 2cm

Washers should be connected with water inlet. Please use attached new plumbing rather than the old.

In order to ensure the quality, water injection tests are carried out before the washer leaves factory, so there may be water inside the internal tub, door seals and door panel, which are normal.

Water inlet connection

1. The pressure of supply water should be between 30kPa and 1000kPa.
2. Don't abrade the screw thread when connect the inlet pipes with valves.

3. Please install dropping equipment if the pressure of supply water surpasses 1000kPa.

4. Two seals are supplied in the connectors of both ends of the pipe to prevent water leaking.
   ● Turn on the tap and check if the connectors leak.

5. Check the pipes regularly. Please change them if necessary.
   ● Make sure the pipes don't be damaged or twine with each other.

The connection of inlet pipes and taps

Use the standard faucet

standard faucet

longer faucet

square faucet

water pipe connector rubber gasket

1 Check the rubber seals on both sides of the hose. Insert a rubber seal into the threaded fittings on each hose to prevent leaking.

Rubber seal Water hose (To water inlet on the washing machine)

2 Connect the water supply hoses to the water faucets tightly by hand and then tighten another 2/3 turn with pliers. -Connect the blue hose to water faucet.

WARNING - Do not overtighten. Damage to the coupling can result.

3 After connecting inlet hose to water faucets, turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.

Simple line drawing of a laboratory apparatus with a faucet and beaker (no text or symbols)

4 Connect the hoses to the water inlet tightly by hand and then tighten another 2/3 turn with pliers.

Water inlet

WARNING - Do not overtighten the hoses. Overtightening can damage the valves resulting in leaking and property damage.

5 Check for leaks by turning on the faucets. If water leaks, check steps 1 to 4 again.

• Such washing machine is designed for home appliances, please do not install it on ship, traveling truck or plane.
• Please turn off the stopcock if long time out of use. (e.g vacation)
• Please remove plug and cancel door lock function to avoid child locking himself/herself inside.
• Packing materials(e.g film, foam) could harm child's safety and cause asphyxia! Attention: MAKE ALL PACKING MATERIEALS OUT OF CHILD REACH.

Install drain-pipe

• Please fix the drain-pipe by a lifting rope.
• For the sake of lightening damage or ground leakage, please place the drain-pipe correctly.
• In order to avoid siphon, the height of drain-pipe should be between (0.85m-1.25m), moreover, the terminal of drain-pipe should not be placed in water.
• If the drain-pipe is too long, please do not force to insert it into washing machine, which would cause abnormal noises. (Please check sketch map next page)

Min. 85cm Max. 125cm

Line drawing of a kitchen sink with faucet and sink (no text or symbols)

Wash tub pipe holder wire harness Min. 85 cm Max. 125cm

the instruction of installation of pipe

Horizontal Adjustment

● To avoid noise and vibrate by adjusting washing machine level. place it at the room corner preferably.
- If ground not level, please adjust alignment pins.( Do not put wood pieces or something like), please make sure four alignment pins touch ground tightly, and machine level completely.

Illustration of a single washing machine with front panel and side buttons (no text or symbols)

- Adjust adjustable feet

Adjust the adjustable feet to make sure the washing machine in balance, which can be placed on the ground steadily. After settling, screw the locknut to guarantee.Do not place the washing machine in the platform ,which is higher than the ground, in order to prevent the machine from falling down because of other accidents.

● The diagonal check

Applying force downward on the diagonal of the washing machine, washing machine should not shake. (both diagonal need to check, if the washing machine shake, must readjust adjustable foot.)

locknut up down ajustable foot

Methods of Door Lock and Remove

DOOR LOCK

- After operating, the door will be locked automatically and "DOOR LOCK" light/picture on the panel is lighting.

Remove Door Lock

• When "DOOR LOCK" light/picture is lighting, press "Start/Pause", WASHING/DRAINING drum stop operating. Please wait for about 2 minutes, door lock will be removed automatically.
• Foam overflowing if open the door during operating, please catch foam with towel.
• If temperature is too high, the door can not be opened during operating.
• If water level is too high, the door can not be open during operating.

The Usage Method of the Detergent Box

Synthetic Detergent Powder ● Please dissolve detergent (e.g soap pieces) before putting into detergent box. Liquid detergent. Bleach ● Please use detergent with less foam. ● Please use two times water to dilute the concentrated type detergent before putting into detergent box. Softener ● Please put softener before washing, which will pour into drum automatically when last potch happening. ● When using concentrated type softener, please dilute it with appropriate water. ● Do not exceed MAX mark. Prewashing Detergent ● Please put moderate detergent after selecting Pre-washing function if cloths is too dirty. ● Use special detergent. ● Do not use too much detergent which will cause too much foam and affect washing quality or will cause malfunction. ● Select detergent according to cloths variety, color, water temperature and contamination level. ● Please use moderate detergent to get washing effect and protect environment.

Function Introduction of Operating Panel

● Turn on or turn off power.
- When procedure finish, press Power to cut off power.

2. Delay Button

• Delay Time
• Delay time refers to the period from appoint to start.

3. Speed Button

• Select the Speed according to the capacity and variety of cloths.
• Different procedure, different speed select range, but the speed of drum clearance no choice.

4. Temp. Button

• Select water temperature according to the variety and contamination degree.
• Different procedure, different water temperature range, some no choice.

5. Start/Pause Button

• Press it to start operating
• Press it to pause during operation, press again to continue.

6. Program Button

- Select program according to variety and contamination of cloths.

7. Tub Clean

• For the sake of clearing the scouring remained, and completing sterilization&disinfection
• Press Speed+Temp. for more than 3 seconds to start tub clean program.

8. Child-Lock Button

• Press it to guard against child operating.
  ● Child-Lock operating, other buttons unavailable except Power.
• Press Pre Delay for more than 3 second to ON/OFF Child-Lock function.

The introduction of function and program

Usage of routine clothes

1.Preparations

• Open the door put clothes in and closes the door.
• Pull out the detergent box, add detergent and close the box.

• Connect the inlet pipes and make sure the tap turned on.

• Press the power button

• The programs can be selected according to requirements.

- Cotton---Eco---Sports---Underwear---Wool---Duvet Spin---Rinse+Spin---Quick 15'---Baby Care---Synthetic---Mix

1. Press start/Pause button and begin to wash

2. When all operations finished, the buzzer emits a noise.

3. Screen shows END, and buzzer rings.

4. Open the door to get cloths out.
   ● Unplug and turn off the stopcock.

The usage of self-compiled program

Use this when need to set up the temperature, times of rinse and the revolution of spin.

1. Prepare to wash

2. Open the door, put clothes in and close the door.

3. Pull out the detergent box, add detergent and close the box.

4. Connect the inlet pipes and make sure the tap turned on.

5. Press the power button

6. The programs can be selected according to requirements.

7. Press Temp./Speed/Delay to setup water temperature, dewatering speed and appoint time.

8. Press the Start/Pause button to start washing.

9. When all operations finished, the buzzer emits a noise.

10. Screen shows END and buzzer rings.

11. Get cloths out.
    • Unplug and turn off the stopcock.

The introduction of Wool program

This function is set for woolen and fibrous clothes. Please confirm the washing icon in clothes before washing them.

1. Preparation for washing

2. Open the door, put clothes in and closes the door.

3. Pull out the detergent box, add detergent and close the box.

4. Connect the inlet pipes and make sure the tap turned on.

5. Press the power button, connect the power.

6. Rotate the program button and choose the "Wool"

- Please choose appropriate temperature and rotate speed according to requirements.

1. Press the Start/Pause button and begin to wash.

2. When all operations finished, the buzzer emits a noise.

● Washing capacity should be less than 2 kg.
- When finish all programs, please take out all clothes quickly to prevent them from distorting.
● The washing can't be ordered.
- In order to prevent clothes from damaging, the water temperature should be less than 40°C.
- Please separate white or bright color clothes from dark clothes.
- Use the detergent specially for woolen clothes to prevent damaging them.

The introduction for ECO program

Wash the clothes lightly polluted can save time and energy.

1. Preparation for washing

- Open the door, put clothes in and closes the door.

- Pull out the detergent box, add detergent and close the box.

- Connect the inlet pipes and make sure the tap turned on.

1. Press the power button, connect the power.

2. Rotate the program button and choose the "ECO"

- Please choose appropriate temperature and rotate speed according to requirements.

1. Press the Start/Pause button and begin to wash.

2. When all operations finished, the buzzer emits a noise.

- When the washer is working, if you want to change its setting, please press the Start/Pause button to stop running temporarily and then choose the program you need.

The introduction for Baby Care program

This function can use high temperature to sterilize and remove the mites.

1. preparation for washing

2. Open the door, put clothes in and closes the door.

3. Pull out the detergent box, add detergent and close the box.

4. Connect the inlet pipes and make sure the tap turned on.

5. Press the power button, connect the power.

6. Rotate the program button and choose the "Baby Care"

- Please choose appropriate temperature and speed according to requirements.

1. Press the Start/Pause button and begin to wash.

2. When all operations finished, the buzzer emits a noise.

The introduction for Spin program

1. preparation for washing

- Open the door, put clothes in and closes the door.

1. Press the power button, connect the power.

2. Rotate the program button and choose the "Spin"

- Pressing "Speed" button can adjust the speed.

1. Press the Start/Pause button

- Begin to drain away water and spin.

1. When all operations finished, the buzzer emits a noise.

● Before spinning, please make sure there are no nails, keys or other foreign matters in the tub to avoid unnecessary loss.
● During the process of spinning, the actual spinning speed may be inconsistent with the program speed, which is because the washer adjust the speed according to the balance between clothes.
- There may be rhythmic drone during spinning, which is the normal voice of drain bump rather than the machine fault.

The introduction of Tub Clean function

1. Preparation for washing

2. Please make sure nothing in the tub before cleaning.

3. Open the distribution box, add the liquid bleach in the main box.
4. Don't add detergent or laundry detergent to prevent causing too much foam.
5. Close the distribution box.

6. Please make sure the inlet pipes connected well and the tap turned on.

7. Press the power button, connect the power.

8. Press the "Speed" and "Temp." button for more than three seconds at the same time, which can choose the tub cleaning program.

9. Press the Start/Pause button.

● The programs begin to operate after the door locked.

1. When all operations finished, the buzzer emits a noise.

● After finish the program, dry the inside part of the machine to prevent the door from distorting.
- If there are children at home, please don't open the door for too much time.

The introduction of Child Lock function

● Prevent children from using the washer.
- Set the solving method: when the washer is operating, press the "Pre Delay" for more than three seconds and the child-lock works; then pressing "Pre Delay" for more than three seconds can relieve child-lock.

- When the washer is operating, after setting the child-lock, all buttons cannot work except the power button; once the child-lock is set, when the washer finishes all programs, press the power button to cut the power and the child-lock can't relieve by itself, when the washer operates again, press "Pre Delay" for mare than three seconds to relieve the child-lock.

- When the child-lock is working, if you want to change the washing program, please relieve child-lock first and restart the machine to choose new washing program; if you want to change the temperature or the speed, please relieve child-lock first, then press the Start/Pause button, and change the temperature and speed at last.

The introduction of washing programs

ALF4137I

program	temperature (°C)	revolution (rpm)	time (m)
Cotton	cold water (20°C,40°C,60°C,90°C)	1000(0,400,800,1400)	94
Eco	60°C(cold water, 20°C,40°C)	1400(0,400,800,1000)	146
Sports	cold water (20°C,40°C)	1000(0,400,800,1400)	83
Duvet	60°C(cold water, 20°C,40°C,90°C)	1400(0,400,800,1000)	125
Baby Care	60°C(cold water, 20°C,40°C,90°C)	1000(0,400,800)	130
Steam	20°C(cold water, 40°C,60°C,90°C)	800(0,400,1000,1400)	83
Mix	cold water(20°C,40°C)	1000(0,400,800)	73
Quick 15'	cold water(20°C,40°C)	800(0,400,1000)	15
Synthetic	40°C(cold water, 20°C,60°C)	1000(0,400,800)	67
Wool	cold water(20°C,40°C)	800(0,400,1000)	57
Rinse+spin	—	1000(0,400,800,1400)	38
Spin	—	1000(0,400,800,1400)	14

• Remarks:
• The time consumption will be changed according to the water pressure, cloths variety, quantity, water temperature.
• The difference between displayed on screen and actual time consumption will happen.
• If speed is too lower, poor washing effect will happen, please add more rinse time.
• Different parameters, different models.
• When self-designed default procedure is energy procedure, the washing time will be increased automatically.
• The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation;
• The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration;
• The household washing machine or the household washer-dryer up to the capacity indicated by the manufacturer for the respective programmes will contribute to energy and water savings;
• Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content
• How to find the model information stored in the product database, as defined in Regulation (EU) 2019/2014 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product
• You can Check the manual and the QR code on the energy efficiency label

The introduction of washing programs

ALF4184I ALF4184XI

program	temperature (°C)	revolution (rpm)	time (m)
Cotton	cold water(20°C,40°C,60°C,90°C)	1000(0,400,800,1400)	94
Eco	40°C(cold water,20°C,60°C)	1400(0,400,800,1000)	145
Sports	20°C(cold water,40°C)	1000(0,400,800)	83
Duvet	60°C(cold water,20°C,40°C,90°C)	1400(0,400,800,1000)	125
Baby Care	60°C(40°C,90°C)	1000(0,400,800,1400)	130
Steam	20°C(cold water,40°C,60°C,90°C)	800(0,400,1000,1400)	83
Mix	cold water(20°C,40°C)	1000(0,400,800)	73
Quick 15'	cold water(20°C,40°C)	800(0,400,1000)	15
Synthetic	40°C(cold water,20°C,60°C)	1000(0,400,800,1400)	67
Wool	cold water(20°C,40°C)	800(0,400,1000)	57
Rinse+spin	—	1000(0,400,800,1400)	38
Spin	—	1000(0,400,800,1400)	14

• Remarks:
• The time consumption will be changed according to the water pressure, cloths variety, quantity, water temperature.
• The difference between displayed on screen and actual time consumption will happen.
• If speed is too lower, poor washing effect will happen, please add more rinse time.
• Different parameters, different models.
• When self-designed default procedure is energy procedure, the washing time will be increased automatically.
• The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation;
• The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration;
• The household washing machine or the household washer-dryer up to the capacity indicated by the manufacturer for the respective programmes will contribute to energy and water savings;
• Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content
• How to find the model information stored in the product database, as defined in Regulation (EU) 2019/2014 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product
• You can Check the manual and the QR code on the energy efficiency label

The introduction of washing programs

ALF4129I

program	temperature (°C)	revolution (rpm)	time (m)
Cotton	cold water(20°C,40°C,60°C,90°C)	1000(0,400,800,1400)	94
Eco	40°C(cold water,20°C,60°C)	1400(0,400,800,1000)	160
Sports	20°C(cold water,40°C)	1000(0,400,800)	83
Duvet	60°C(cold water,20°C,40°C,90°C)	1400(0,400,800,1000)	125
Baby Care	60°C(40°C,90°C)	1000(0,400,800,1400)	130
Steam	20°C(cold water,40°C,60°C,90°C)	800(0,400,1000,1400)	83
Mix	cold water(20°C,40°C)	1000(0,400,800)	73
Quick 15'	cold water(20°C,40°C)	800(0,400,1000)	15
Synthetic	40°C(cold water,20°C,60°C)	1000(0,400,800,1400)	67
Wool	cold water(20°C,40°C)	800(0,400,1000)	57
Rinse+spin	—	1000(0,400,800,1400)	38
Spin	—	1000(0,400,800,1400)	14

- Remarks:

1. The time consumption will be changed according to the water pressure, cloths variety, quantity, water temperature.

2. The difference between displayed on screen and actual time consumption will happen.

3. If speed is too lower, poor washing effect will happen, please add more rinse time.

4. Different parameters, different models.

5. When self-designed default procedure is energy procedure, the washing time will be increased automatically.

- The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation;

- The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration;

- The household washing machine or the household washer-dryer up to the capacity indicated by the manufacturer for the respective programmes will contribute to energy and water savings;

- Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content

- How to find the model information stored in the product database, as defined in Regulation (EU) 2019/2014 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product

- You can Check the manual and the QR code on the energy efficiency label

Maintenance

• Please maintenance washing machine to extend service life.
• Before maintenance, please unplug.

Body of washing machine

After washing, please clean it with soft cloth. If much contamination, please use appropriate detergent or soap.

• Do not watering directly.
• Do not use putty-powder, diluent, gasoline, alcohol to clean machine body.

Door Gasket Ring

After washing, please remove contamination, wastepaper and so on, if foreign matter exists, please remove.

The Clearance of Detergent Box

Please clean the detergent box regularly. Pull it out and wash with clean water, then insert back.

① Push down ② pull out

The Clearance of Universal coupling (Suggest:Once/ half year)

- If waste accumulated, it will influence water inlet speed.

1. Take off the soft pipe from connecting part side.
2. Take off the screwing device according to the arrow showed.
3. Wash the inside of the screwing device.
4. Install the cleaned crewing device with the inlet soft pipe.

The clearance of inlet water valve (Suggest:Once/ half year)

1. Take off the soft pipe from washing machine side.
2. Take off the filter net from water valve.
3. Clean the filter net with tooth-brash.
4. Install the soft inlet pipe.

valve of water inlet

Maintenance

When washing machine is frozen

1.Cover stopcock and connecting part with hot towel.

2.Ake off the inlet pipe, and put it into 50 degree water.

1. Pour into the drum about 2-3L of 50 degree water.

2. Connect inlet pipe, turn on the stopcock and start the washing machine, please check whether inlet and outlet is normal.

a. Faucet Connecting part Inlet pipe b. Take off the inlet pipe, and put it into 50 degree water. c.Pour into the drum about 2-3L of 50 degree water. 50 degree water 50 degree water

The Clearance of dewatering-pump filter( Suggest: once/month)

1. Press fastener on the pump after dewtering and power off, open the lid of water-pump filter. (Attention: if hot water inside, please go ahead after it be cold.)
2. Take off the filter anti-anticlockwise.
   3.Wash the filter.
3. Direct at pump and insert the filter, tighten it clockwise and tighten the lid. Attention: a. Please tighten the filter well to avoid leak. b. Please do not clean during operation.

The Drum Clearance (Suggest once/month)

After using for a period, some dirt maybe exist. You can clean the inside and outside of drum by operating the drum procedure.

Attention: please do not put cloths and detergent when clearing the drum.

Varieties of Functions

Function	Description
Child lock	Statement	In order to avoid child misplay
	Setup to remove	During operation, press PRE DELAY for more than 3 seconds, please unplug and or press PRE DELAY to remove Child Lock
compensation of power-off	Statement	when power is connected after power off, the time point will continue from the previous stop time point.
Door self-lock	Statement	After selecting procedure, the door locked automatically, 2 minutes after operation over, lock removed.
Clearance of the drum	Statement	To remove wasted and germ, please sterilize to clean the drum.
	Setup to remove	Press TEMP.+ SPEED for more than 3 seconds to select tub clean.
Delay	Statement	Press DELAY to select time of washing, Display screen shows 24 hours level, one hour/one level . press it for long time, time shows circular.

Notice before Washing

1. Washing guide identification

- Please check cloths washing guide identification, which shows cloths texture and washing method.

2.Classification washing

- Please wash cloth of the same texture, different texture, different water temperature, speed and washing procedure, please split deep colored cloths from white cloths. Split dyed cloths from cotton, otherwise the white cloths would be discolored. If possible, please do not wash high contaminated cloths with clean ones together.

- The degree of pollution (serious, moderate, slight)

classify clothes and wash according to the degree.

• color (white, light color, deep color)

classify them and wash.

- velveteen (easy to fall off, easy to be adhered)

classify the white and the deep color.

3. Notes

• When put big and small clothes together, put the big first and they have to be less than half of total clothes. Please don't wash single cloth because it may cause the trouble of imbalance. Please add one or two similar clothes.
• Small clothes like silk stockings and handkerchiefs should be put into mesh bags to wash. Before washing the bra with steel rings, please take the rings off. If it is inconvenient to do this, please put them into mesh bags to prevent the bra slipping into the gap between internal and external tubs.
• Check all pockets and make sure nothing in them. Nails, hairpin, match, pen, coin and key will damage your washer and clothes.
• Zip up all clothes, fix the button and hook and tie the loose belt, make sure that other clothes cannot be damaged by them.
• Firstly use the water with a little detergent to wash the parts with too many stains, such as collar and cuffs, which can make the clothes cleaner.
• Check the door seals and make sure nothing on them.
  • Make sure there is nothing in the tub before washing.
• To make sure there is cloth caught in the door sealing ring, in order to avoid the cloths and door seal ring from damaging.

Line drawing of a bag with textured pattern and a tied ribbon (no text or symbols)

Illustration of a hand pouring liquid from a bottle into a container (no text or symbols)

Diagram showing four clothing items with symbols: a circle, an X, a circle, and an X, likely indicating selection or categorization.

Illustration of a hand pressing down on a textured surface, with magnified detail showing the interior and side view (no text or symbols)

graph TD
    A["Start"] --> B{Decision}
    B -->|Yes| C["Process"]
    B -->|No| D["End"]

Cross-sectional diagram of a mechanical component or housing (no text or symbols visible)

Non-fault conditions

The door can't open.	● The program is running. ● There are clothes between the door and door seals.
There is an odor.	● There may be a smell of rubber because some components are made up of rubber.
There is too little water when wash and rinse.	● Roller washing machine just needs a little water when operating.
No water inflowing.	● Is the tap turned on? ● Is the inlet pipe frozen? ● Are the filters blocked?
Water inflows halfway	● If the water level declines, the washer will supply water automatically.
Water outflows when washing.	● Check if add the detergent with too much bubbles.
Remaining time changes	● If clothes are off center when spin, spinning time will extend to correct the deviation.
There is abnormal noise when spin.	● Check if the power line touches with cabinet. ● Have the transport bolts been dismantled? ● Are there some hairpins or coins in the roller?
The washer can't work after the failure of electricity.	● The washer will stop working after the failure of electricity. When the power is restored, it still can't continue to work. Please press the power button and reset the program.

Troubleshooting guide

Phenomenon	check points	solutions
Washer can't start	Check if press the power button or start/pause button?Is the plug pulling out?Is there a power failure?Check if cut the leakage protector?	Press the power button or start/pause button.Connect the plug.Please wait.Open the leakage protector.
Spinning screen shows "UE"	Check if disassemble the carriage bolt?Is the machine placed steadily?Are the clothes too small or light?Are the locknuts on under the feet tightened up?	Disassemble the carriage bolt.Place the machine on a steady ground.Add more clothes.Tighten up the locknuts.
Water inflow screen shows "IE"	Check if turn the tap off?Is the water supply cut off or the water pressure too low?Are the water inlet pipes frozen?Are the filters blocked?	Open the stopcock.Please wait.Use hot water to unfreeze the pipes.Take out the filters and clean them.
Water outflow screen shows "OE"	Are the outlet pipes placed too highly?Are the outlet pipes frozen?Are the outlet pipes blocked?Are the floor drain blocked?	Please put away the outlet pipes and make sure the height within 1M.Use hot water to unfreeze the pipes.Take out the foreign matter and dredge the pipes.Clean the floor drain.
Door trouble screen shows "DE"	Make sure if start the washer without closing the door well.	Make sure the door truly closed
No heating screen shows "LE"	Please pull the plug and entrust the after-sales service
Continuous water inflow screen shows "FE"	Close the stopcock, pull the plug and entrust the after-sales service.
The screen shows "LE" or "CE" when wash tub doesn't rotate.	Close the stopcock, pull the plug and entrust the after-sales service.
Too much foam	Check if add too much detergent?If use the low bubble detergent which is especially for front loading washing machine?	Add reasonable amount of detergent.Use the detergent correctly.

Specification

Model	ALF4137I	ALF4184IALF4184XI	ALF4129I
Rated washing capacity	7.0kg	8.0kg	9.0kg
Rated spinning capacity	7.0kg	8.0kg	9.0kg
Rated voltage	220-240V~,50Hz	220-240V~,50Hz	220-240V~,50Hz
Rated washing power	200W	350W	200W
Rated spinning power	500W	700W	600W
Rated heating power	1600W	1600W	2000W
Maximum power	1700W	1750W	2200W

Specification and feature are subject to change without prior notice for purpose of product improvement.

Environmental Protection

Correct Dispasal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmental safe recycling.

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

The introduction of frequently-used programs

The following data just for reference only

ALF4137I

program	temperature (°C)	time (m)	water consumption (L/cycle)	energy consumption (KWh/cycle)	revolution (rpm)	maximum load	Average remaining moisture content
Wool	Cold	57		0.0635	600	≤2kg	95%
Cotton 20°C	20	1:37	60	0.25	800	rated	76%
Cotton 90°C	80	2:30		1.870	800	rated	76%
Synthetic 40°C	40	1:07		0.5545	800	≤4 kg	80%
Quick 15'	Cold	15		0.0535	600	≤2 kg	80%

ALF4184I ALF4184XI

program	temperature (°C)	time (m)	water consumption (L/cycle)	energy consumption (KWh/cycle)	revolution (rpm)	maximum load	Average remaining moisture content
Wool	Cold	57		0.0635	800	≤2kg	95%
Cotton 20°C	20	1:36	60	0.25	1000	rated	76%
Cotton 90°C	80	2:29		1.870	1000	rated	76%
Synthetic 40°C	40	1:06		0.5545	1000	≤4 kg	80%
Quick 15'	Cold	15		0.0535	800	≤2 kg	80%

ALF4129I

program	temperature (°C)	time (m)	water consumption (L/cycle)	energy consumption (KWh/cycle)	revolution (rpm)	maximum load	Average remaining moisture content
Wool	Cold	57		0.140	800	≤2kg	76%
Cotton 20°C	20	1:36	73	0.4	800	rated	62%
Cotton 90°C	80	2:29		2.275	800	rated	62%
Synthetic 40°C	40	1:06		1.365	800	≤4 kg	80%
Quick 15'	Cold	15		0.0841	800	≤2 kg	80%

Supplier's name or trade mark:

Supplier's address (b):

Model identifier: ALF4137I

General product parameters:

Parameter	Value		Parameter	Value
Rated capacity (a) (kg)	7.0		Dimensions in cm	Height	85
				Width	60
				Depth	48
EEI_W (a)	79.8		Energy efficiency class (a)	D
Washing efficiency index (a)	1.031		Rinsing effectiveness (g/kg) (a)	5.0
Energy consumption in kWh per cycle, based on the eco 40-60 programme. Actual energy consumption will depend on how the appliance is used.	0.688		Water consumption in litre per cycle, based on the eco 40-60 programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.	45
Maximum temperature inside the treated textile (a) (°C)	Rated capacity	40	Remaining moisture content (a) (%)	53.5
	Half	41
	Quarter	39
Spin speed (a) (rpm)	Rated capacity	1400	Spin-drying efficiency class (a)	B
	Half	1400
	Quarter	1400
Programme duration (a) (h:min)	Rated capacity	3:14	Type	free-standing
	Half	2:35
	Quarter	2:31
Airborne acoustical noise emissions in the spinning phase (a) (dB(A) re 1 pW)	75		Airborne acoustical noise emission class (a) (spinning phase)	B
Off-mode (W)	0.50		Standby mode (W)	N/A
Delay start (W) (if applicable)	4.00		Networked standby (W) (ifapplicable)	N/A

Minimum duration of the guarantee offered by the supplier (b):

This product has been designed to release silver ions during the washing cycle

NO

Additional information:

Weblink to the supplier's website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 (1) (b) is found:

^(a) for the eco 40-60 programme.
^(b) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
(°) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.

Information to be included in the technical documentation for household washing machines

PARAMETER	UNIT	VALUE
Rated capacity for the eco 40-60 programme, at 0,5 kg intervals (c)	kg	7.0
Energy consumption of the eco 40-60 programme at rated capacity (E_W,full)	kWh/cycle	0.895
Energy consumption of the eco 40-60 programme at half rated capacity (E_W,1/2)	kWh/cycle	0.699
Energy consumption of the eco 40-60 programme at quarter rated capacity (E_W,1/4)	kWh/cycle	0.361
Weighted energy consumption of the eco 40-60 programme (E_W)	kWh/cycle	0.680
Standard energy consumption of the eco 40-60 programme (SCE_W)	kWh/cycle	0.860
Energy Efficiency Index (EEI_W)	—	78.9
Water consumption of the eco 40-60 programme at rated capacity (W_W,full)	L/cycle	45.8
Water consumption of the eco 40-60 programme at half rated capacity (W_W,1/2)	L/cycle	25.9
Water consumption of the eco 40-60 programme at quarter rated capacity (W_W,1/4)	L/cycle	20.6
Weighted water consumption (W_W)	L/cycle	33
Washing efficiency index of the eco 40-60 programme at rated capacity (I_W)	—	1.031
Washing efficiency index of the eco 40-60 programme at half rated capacity (I_W)	—	1.031
Washing efficiency index of the eco 40-60 programme at quarter rated capacity (I_W)	—	1.031
Rinsing effectiveness of the eco 40-60 programme at rated capacity (I_R)	g/kg	5.0
Rinsing effectiveness of the eco 40-60 programme at half rated capacity (I_R)	g/kg	5.0
Rinsing effectiveness of the eco 40-60 programme at quarter rated capacity (I_R)	g/kg	5.0
Programme duration of the eco 40-60 programme at rated capacity (t_w)	h:min	3:14
Programme duration of the eco 40-60 programme at half rated capacity (tw)	h:min	2:35
Programme duration of the eco 40-60 programme at quarter rated capacity (tw)	h:min	2:30
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at rated capacity (T)	°C	40
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at half rated capacity (T)	°C	42
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at quarter rated capacity (T)	°C	41
Spin speed in the spinning phase of the eco 40-60 programme at rated capacity (S)	rpm	1400
Spin speed in the spinning phase of the eco 40-60 programme at half rated capacity (S)	rpm	1400
Spin speed in the spinning phase of the eco 40-60 programme at quarter rated capacity (S)	rpm	1400
Weighted remaining moisture content (D)	%	53.3
Airborne acoustical noise emissions during eco 40-60 programme (spinning phase)	dB(A) re 1 pW	75
Power consumption in ‘off mode’ (Po)	W	0.50
Power consumption in ‘standby mode’ (Psm)	W	N/A
Does ‘standby mode’ include the display of information?	—	NO
Power consumption in ‘standby mode’ (Psm) in condition of networked standby (if applicable)	W	N/A
Power consumption in ‘delay start’ (Pds) (if applicable)	W	4.00

Supplier's name or trade mark:

Supplier's address (b):

Model identifier: ALF4184I ALF4184XI

General product parameters:

Parameter	Value		Parameter	Value
Rated capacity (a) (kg)	8.0		Dimensions in cm	Height	85
				Width	60
				Depth	51
EEI_W (a)	79.4		Energy efficiency class (a)	D
Washing efficiency index (a)	1.031		Rinsing effectiveness (g/kg) (a)	5.0
Energy consumption in kWh per cycle, based on the eco 40-60 programme. Actual energy consumption will depend on how the appliance is used.	0.722		Water consumption in litre per cycle, based on the eco 40-60 programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.	47
Maximum temperature inside the treated textile (a) (°C)	Rated capacity	38	Remaining moisture content (a) (%)	53.0
	Half	35
	Quarter	31
Spin speed (a) (rpm)	Rated capacity	1400	Spin-drying efficiency class (a)	B
	Half	1400
	Quarter	1400
Programme duration (a) (h:min)	Rated capacity	3:18	Type	free-standing
	Half	2:26
	Quarter	2:20
Airborne acoustical noise emissions in the spinning phase (a) (dB(A) re 1 pW)	75		Airborne acoustical noise emission class (a) (spinning phase)	B
Off-mode (W)	0.50		Standby mode (W)	N/A
Delay start (W) (if applicable)	4.00		Networked standby (W) (ifapplicable)	N/A

Minimum duration of the guarantee offered by the supplier (b):

This product has been designed to release silver ions during the washing cycle NO

Additional information:

Weblink to the supplier's website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 (1) (b) is found:

^(a) for the eco 40-60 programme.
(b) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
(6) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.

Information to be included in the technical documentation for household washing machines

PARAMETER	UNIT	VALUE
Rated capacity for the eco 40-60 programme, at 0,5 kg intervals (c)	kg	8.0
Energy consumption of the eco 40-60 programme at rated capacity (E_W,full)	kWh/cycle	0.987
Energy consumption of the eco 40-60 programme at half rated capacity (E_W,1/2)	kWh/cycle	0.635
Energy consumption of the eco 40-60 programme at quarter rated capacity (E_W,1/4)	kWh/cycle	0.393
Weighted energy consumption of the eco 40-60 programme (E_W)	kWh/cycle	0.684
Standard energy consumption of the eco 40-60 programme (SCE_W)	kWh/cycle	0.722
Energy Efficiency Index (EEI_W)	—	79.4
Water consumption of the eco 40-60 programme at rated capacity (W_W,full)	L/cycle	54.1
Water consumption of the eco 40-60 programme at half rated capacity (W_W,1/2)	L/cycle	28.6
Water consumption of the eco 40-60 programme at quarter rated capacity (W_W,1/4)	L/cycle	22.6
Weighted water consumption (W_W)	L/cycle	47
Washing efficiency index of the eco 40-60 programme at rated capacity (I_W)	—	1.031
Washing efficiency index of the eco 40-60 programme at half rated capacity (I_W)	—	1.031
Washing efficiency index of the eco 40-60 programme at quarter rated capacity (I_W)	—	1.031
Rinsing effectiveness of the eco 40-60 programme at rated capacity (I_R)	g/kg	5.0
Rinsing effectiveness of the eco 40-60 programme at half rated capacity (I_R)	g/kg	5.0
Rinsing effectiveness of the eco 40-60 programme at quarter rated capacity (I_R)	g/kg	5.0
Programme duration of the eco 40-60 programme at rated capacity (t_w)	h:min	3:18
Programme duration of the eco 40-60 programme at half rated capacity (tw)	h:min	2:26
Programme duration of the eco 40-60 programme at quarter rated capacity (tw)	h:min	2:20
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at rated capacity (T)	°C	38
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at half rated capacity (T)	°C	35
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at quarter rated capacity (T)	°C	31
Spin speed in the spinning phase of the eco 40-60 programme at rated capacity (S)	rpm	1400
Spin speed in the spinning phase of the eco 40-60 programme at half rated capacity (S)	rpm	1400
Spin speed in the spinning phase of the eco 40-60 programme at quarter rated capacity (S)	rpm	1400
Weighted remaining moisture content (D)	%	53.0
Airborne acoustical noise emissions during eco 40-60 programme (spinning phase)	dB(A) re 1 pW	75
Power consumption in ‘off mode’ (Po)	W	0.50
Power consumption in ‘standby mode’ (Psm)	W	N/A
Does ‘standby mode’ include the display of information?	—	NO
Power consumption in ‘standby mode’ (Psm) in condition of networked standby (if applicable)	W	N/A
Power consumption in ‘delay start’ (Pds) (if applicable)	W	4.00

Supplier's name or trade mark:

Supplier's address (b):

Model identifier: ALF4129I

General product parameters:

Parameter	Value		Parameter	Value
Rated capacity (a) (kg)	9.0		Dimensions in cm	Height	85
				Width	59.5
				Depth	60
EEI_W (a)	68.9		Energy efficiency class (a)	C
Washing efficiency index (a)	1.04		Rinsing effectiveness (g/kg) (a)	5.0
Energy consumption in kWh per cycle, based on the eco 40-60 programme. Actual energy consumption will depend on how the appliance is used.	0.66		Water consumption in litre per cycle, based on the eco 40-60 programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water.	50
Maximum temperature inside the treated textile (a) (°C)	Rated capacity	39	Remaining moisture content (a) (%)	53.0
	Half	38
	Quarter	38
Spin speed (a) (rpm)	Rated capacity	1400	Spin-drying efficiency class (a)	B
	Half	1400
	Quarter	1400
Programme duration (a) (h:min)	Rated capacity	3:37	Type	free-standing
	Half	2:45
	Quarter	2:40
Airborne acoustical noise emissions in the spinning phase (a) (dB(A) re 1 pW)	75		Airborne acoustical noise emission class (a) (spinning phase)	B
Off-mode (W)	0.50		Standby mode (W)	N/A
Delay start (W) (if applicable)	4.00		Networked standby (W) (ifapplicable)	N/A

Minimum duration of the guarantee offered by the supplier (b):

This product has been designed to release silver ions during the washing cycle

NO

Additional information:

Weblink to the supplier's website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 (1) (b) is found:

^(a) for the eco 40-60 programme.
^(b) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
(°) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.

Information to be included in the technical documentation for household washing machines

PARAMETER	UNIT	VALUE
Rated capacity for the eco 40-60 programme, at 0,5 kg intervals (c)	kg	9.0
Energy consumption of the eco 40-60 programme at rated capacity (E_W,full)	kWh/cycle	0.940
Energy consumption of the eco 40-60 programme at half rated capacity (E_W,1/2)	kWh/cycle	0.630
Energy consumption of the eco 40-60 programme at quarter rated capacity (E_W,1/4)	kWh/cycle	0.430
Weighted energy consumption of the eco 40-60 programme (E_W)	kWh/cycle	0.654
Standard energy consumption of the eco 40-60 programme (SCE_W)	kWh/cycle	0.951
Energy Efficiency Index (EEI_W)	—	68.9
Water consumption of the eco 40-60 programme at rated capacity (W_W,full)	L/cycle	48.2
Water consumption of the eco 40-60 programme at half rated capacity (W_W,1/2)	L/cycle	32.5
Water consumption of the eco 40-60 programme at quarter rated capacity (W_W,1/4)	L/cycle	26.2
Weighted water consumption (W_W)	L/cycle	35
Washing efficiency index of the eco 40-60 programme at rated capacity (I_W)	—	1.031
Washing efficiency index of the eco 40-60 programme at half rated capacity (I_W)	—	1.031
Washing efficiency index of the eco 40-60 programme at quarter rated capacity (I_W)	—	1.031
Rinsing effectiveness of the eco 40-60 programme at rated capacity (I_R)	g/kg	5.0
Rinsing effectiveness of the eco 40-60 programme at half rated capacity (I_R)	g/kg	5.0
Rinsing effectiveness of the eco 40-60 programme at quarter rated capacity (I_R)	g/kg	5.0
Programme duration of the eco 40-60 programme at rated capacity (t_w)	h:min	3:37
Programme duration of the eco 40-60 programme at half rated capacity (tw)	h:min	2:45
Programme duration of the eco 40-60 programme at quarter rated capacity (tw)	h:min	2:40
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at rated capacity (T)	°C	39
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at half rated capacity (T)	°C	38
Temperature reached for minimum 5 min inside the load during eco 40-60 programme at quarter rated capacity (T)	°C	38
Spin speed in the spinning phase of the eco 40-60 programme at rated capacity (S)	rpm	1400
Spin speed in the spinning phase of the eco 40-60 programme at half rated capacity (S)	rpm	1400
Spin speed in the spinning phase of the eco 40-60 programme at quarter rated capacity (S)	rpm	1400
Weighted remaining moisture content (D)	%	53.0
Airborne acoustical noise emissions during eco 40-60 programme (spinning phase)	dB(A) re 1 pW	75
Power consumption in ‘off mode’ (Po)	W	0.50
Power consumption in ‘standby mode’ (Psm)	W	N/A
Does ‘standby mode’ include the display of information?	—	NO
Power consumption in ‘standby mode’ (Psm) in condition of networked standby (if applicable)	W	N/A
Power consumption in ‘delay start’ (Pds) (if applicable)	W	4.00