VTD-A2812/VM - Security Camera Vitek - Free user manual and instructions

USER MANUAL VTD-A2812/VM Vitek

VITEK® INDUSTRIAL VIDEO PRODUCTS, INC.

Alpha Mega Series Vandal Resistant Dome Cameras

Four VITEK security cameras with camera heads and a Alpha Mega logo (no text on devices themselves)

• 1/2.9" CMOS Sensor
• 1000 TV Lines of Resolution (1.39 MegaPixel)
• Highly Advanced EN773E Digital Signal Processor
• 2.8-12mm Varifocal Lens Included
• Available with 35 IR LEDs (120' Range)
• Advanced OSD Functions: WDR, 3D DNR, DSS, DIS, Sens-up, Motion Detection, Privacy
• Secondary Video Output (Cable Included)
• 3-Axis Mount for Optimum Viewing Angle
• IP68 Waterproof Rated
• 12VDC/24VAC Dual Voltage Operation

TABLE OF CONTENTS

BOX CONTENTS / MOUNTING ACCESSORIES 2-3

AVAILABLE MODELS 3

VTD-A2812/VM INSTALLATION 4

VTD-AR2812/VM INSTALLATION 5

INSTALLATION TIPS 6

OSD OPERATION 7-18

DIMENSIONS 19

SPECIFICATIONS 20-21

NOTES 22

BOX CONTENTS

1) Alpha Mega Dome Camera
2) Mounting Accessories
3) Secondary Video Output Cable
4) This instruction Manual & Mounting Template

MOUNTING ACCESSORIES

Line drawing of a screw with threaded shaft and circular head (no text or symbols)

Self Tapping Screws

For attaching the housing base to a solid surface.

Type #: Phillips ST4x30

Qty: 4

Secondary Video Output Cable

To be used with a service monitor for adjusting

the angle, focus and zoom.

Qty: 1

Torx Wrench

Type #: T20

Length: 63mm / Diameter: 4mm

Qty: 1

Hex Wrench

If necessary, use the wrench to help secure the surface mount.

AVAILABLE MODELS

VTD-A2812/VWM

Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal

Vandal Dome - Ivory

VTD-A2812/VBM

Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal

Vandal Dome - Black

VTD-AR2812/VWM

Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal

Vandal Dome & 35 IR LEDs - Ivory

VTD-AR2812/VBM

Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal

Vandal Dome & 35 IR LEDs - Black

VTD-A2812/VM INSTALLATION

INSTALLATION

1. Opening

Use the allen wrench to open the cover.

1. Place the camera in the desired location and install using the screws supplied.

Technical line drawing of a mechanical component with no visible text or symbols

GUIDE PATTERN Screws

3. Connecting Cables

graph TD
    A["AC24V / DC12V DualPower"] --> B["VIDEO"]
    B --> C["Monitor"]
    C --> D["Intermediate (DVR)"]
    D --> E["Monitor"]
    E --> F["Video"]
    style A fill:#f9f,stroke:#333
    style C fill:#ccf,stroke:#333
    style D fill:#cfc,stroke:#333
    style E fill:#fcc,stroke:#333

4. Pan / Tilt (3Axis) Controls.

5. Use the allen wrench to close the cove

Gear / Fat Tube / Wire Tr Fan

Screws n Tips on page 6

* See Installation Tips on page 6

VTD-AR2812/VM INSTALLATION

1. Opening

Use the allen wrench to open the cover.

Technical line drawing of a mechanical component with internal gears and a pipe (no text or symbols)

2. Place the camera in the desired location and install using the screws supplied.

GUIDE PATTERN Screws

3. Connecting Cables

graph TD
    A["AC24V / DC12V Bus Power"] --> B["Video"]
    B --> C["Monitor"]
    C --> D["Intermediate (DVR)"]
    D --> E["Monitor"]
    E --> F["Video HLE IN OUT"]
    E --> G["Video HLE IN OUT"]

4. Pan / Tilt & Focus Controls

R Cover Open Zoom Focus * See Installation

5. Use the allen wrench to close the cover.

5 Screws

* See Installation Tips on page 6

INSTALLATION TIPS

1.) Power Consumption - Amperage/Voltage

It is of utmost importance that the proper Voltage and Amperage is used when applying power to your VITEK Alpha Series Dome Camera. They can be powered by either 12V DC or 24V AC. Always use a UL Listed power transformer. The Voltage must be measured at the camera location. It is very important that the camera receives no less than the required Voltage or it will be “Starved” and eventually die out. Cameras with Infrared LEDs require substantially more Amperage than others so please refer to the Specifications (page 20-21) for the camera you are installing.

OSD OPERATION

MENU

SETUP MENU

EXPOSURESENS-UP BRIGHTNESS LENS SHUTTER AGC RETURN

WHITE BALAUTO AUTOext PRESET MANUAL

IMAGESHARPNESS DEFOG D-ZOOM MIRROR FLPPRIVACY SHADING COLOR GAIN ACE RETURN

BACKLIGHTOFF HLC BLC WDR

DAY&NIGHTMODE RETURN(AUTO, B/W, COLOR, EXTERN)

DNROFF LOW MIDDLE HIGH

MOTIONMOTION ALARM QUICK ZOOM RETURN

SYSTEMSERIAL GAMMA PEDESTAL VIEW ANGLECVBS LANGUAGE FOCUS ADJ FACTORY SET RETURN

Above specifications may be changed without any notice.

OSD OPERATION

SETTINGS

Settings can be made using the Joystick located on the rear of the camera.

To Setup, please Push Up Left Right Down Extra Video Output

1. Please press joystick down

- Settings can now be made. The Main Menu is displayed on monitor.

1. Please select any function you wish to activate by pushing the joystick Up or Down

• The cursor position will appear yellow on your screen.

Push the joystick up or down to highlight the function you wish to change.

OSD OPERATION

MENU

Select any function you wish to operate by pushing the joystick Up or Down.

MANU ● EXPOSURE ○ WHITE BAL ■ IMAGE ● BACKLIGHT ● DAY&NIGHT ■ DNR ● MOTION ● SYSTEM □ EXIT Modes can be changed pushing the joystick Right or Left.

1. Please press the joystick Right or Left if you wish to change mode.

- When the joystick is pressed Right or Left, available values and mode are displayed in order. Please keep pressing the joystick until you get the mode you wish.

1. Please select "EXIT" and then press the joystick to finish the setting.

MAIN MENU

EXPOSURE, WHITE BAL, IMAGE, BACKLIGHT, DAY&NIGHT, DNR, MOTION, SYSTEM, EXIT control can be selected.

OSD OPERATION

EXPOSURE

• When the Main Menu screen is displayed move highlighted area to EXPOSURE using the up/down of the joystick and then press down on the joystick to enter EXPOSURE Mode.
• Highlight section to change by using joystick Up/Down. After section is highlighted us joystick Left/Right to adjust settings.

MANU EXPOSURE WHITE BAL AUTO IMAGE BACKLIGHT OFF DAY&NIGHT DNR MIDDLE MOTION SYSTEM EXIT

* EXPOSURE SENS-UP X2 BRIGHTNESS [10] LENS DC SHUTTER AUTO AGC [20] RETURN

- SENS_UP : OFF / X2 / X4 / X8 / X16 / X32 / X60

- Brighter video can be obtained by increasing the exposure time at night with SENS-UP. SENS-UP is the maximum integration of frames by DSS(Digital Slow Shutter) in low light.

- When "SENS_UP" is on, shutter cannot be adjusted.

-BRIGHTNESS: Adjusts the brightness of video(0\~20).
-LENS: When using the built-in lens, select either Manual (default) or DC.

- DC MODE : OUTDOOR / INDOOR / DEBLUR - MANUAL MODE : DEBLUR / NORMAL /

- SHUTTER: AUTO / MANUAL / FLICKER - When selecting Manual choose which Shutter speed to use. (1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/16000, 1/30000, 1/60000)

- AGC (Auto Gain Control) - The higher the gain level, the brighter the screen - but the higher the noise.

- RETURN

OSD OPERATION

WHITE BAL

• Use the White Balance function to adjust the screen color.
- When in the MAIN MENU highlight WHITE BAL by using the joystick up/down.
- Select mode by moving joystick left or right.

• AUTO
: Default - This function continuously adjusts the white balance automatically to adapt to changes in lighting conditions.
- AUTOext
This mode is for use in Halogen or extremely bright white light.

- PRESET

: This function adjusts the white balance regardless of the subject conditions.

• MANUAL

KELVIN : LOW / MIDDLE / HIGH

R-GAIN : Joystick left to decrease, joystick right to increase.

B-GAIN : Joystick left to decrease, joystick right to increase.

RETURN

NOTE

• Under the following conditions the WHITE BALANCE function may not operate properly. In such cases, please select the AWB mode.
• When the object's surroundings have a very high color temperature
• When the object's surroundings are dark

OSD OPERATION

IMAGE

• SHARPNESS: Adjust from 0\~10 by using joystick left or right.
• DEFOG : MODE (you can select AUTO / MANUAL) , LEVEL (you can select LOW / MIDDLE / HIGH)
  -DZOOM: You can use a digital zoom of 1.0 X \~ 8.0 X
• MIRROR / FUP : Used to inverse the picture.

OFF

MIRROR (ON)

RUP (OK)

-PRIVACY: This mode conceals the areas you do not wish to appear on the screen.

MACE SHARPNESS DEFOG D-ZOOM MIRROR FLIP PRIMACY SHADING COLOR GAIN ACE RETURN

PRIMARY ZONE NUM 0 ZONE DISP CN H-POS 12 V-POS 2 H-SIZE 3 V-SIZE 3 Y LEVEL [mm(mm)] 10 CR LEVEL [mm(mm)] 10 CB LEVEL [mm(mm)] 10 RETURN OFF

• SHADING : When using wide angle lens, you can compensate darkness of corners on the screen.
• COLOR GAIN : Adjust from 0\~20 by using joystick left or right.
• ACE (Adaptive Color & Contrast Enhancement) :

OFF, LOW, MIDDLE, HIGH, ACE performs an image enhancement process to enhance the image by changing the brightness value.

OSD OPERATION

① BACKLIGHT

When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function.

HLC LEVEL |nndnnnnd 10 MODE ALL DAY RETURN

BLC H-POS 7 V-POS 6 H-SIZE 6 V-SPE 5 RETURN

WDR WEIGHT HIGH RETURN

• OFF: Turn off "BACKLIGHT" function
• HLC : LEVEL - Adjust from 0\~20 by using joystick left or right. MODEL - you can choice NIGHT ONLY or ALL DAY.
  • BLC

H-POS : Adjust from 0\~20 with 0 being the left most area. V-POS : Adjust from 0\~20 with 0 being the top area. H-SIZE : Adjust from 0\~20 with 0 being the smallest area. H-SIZE : Adjust from 0\~20 with 0 being the smallest area.

• WDR (Wide Dynamic Range)

This function extends the gain range of the screen that is useful if the camera takes a simultaneous picture of both indoor and outdoor. It improves contrast of the picture in outdoor scenery as well as indoor. Video image is processed from two images by dual shutter (long and short shutter) in a field to provide the best dynamic range. Highlight area is compensated by the short shutter and dark area is compensated by the long shutter. Final video may have less contrast compared to the conventional camera which does not have WDR function.

WDR (ON)

WDR (OFF)

OSD OPERATION

DAY&NIGHT

MANU EXPOSURE WHITE BAL MAGE BACKLIGHT DAY&NIGHT DNR MOTION SYSTEM EXIT

- EXTERN : DAY or NIGHT is determined by the built-in light photo sensor. Camera with IR LED must be set to EXTERN

* DAYS&NIGHT MODE EXTERN ▼ RETURN

EXTERN ANTI-SAT 0 AGC THRES 11 AGC MARGIN 2 DELAY LOW RETURN

• AUTO : Used when DAY or NIGHT is determined by light level through the lens and DAY from/to NIGHT is switched automatically by the scene brightness.

* COLOR : This picture is always displayed in color.
* B&W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode.

OSD OPERATION

DNR

DNR (Digital Noise Reduction)

- DNR is a technique of removing image noise from a video signal by applying a digital comb filter. It makes images clearer and reduces video file size.

• OFF : DNR function does not operate.
• LOW / MIDDLE / HIGH : You can select 'LOW', 'MIDDLE' or 'HIGH' menu as DNR condition.

MOTION

This Product has a feature that allows you to observe movement in 3 different areas on the screen and the word MOTION will appear on screen when motion is detected.

DET. SETTING SENSITIVITY [mm]mm[ 5 OBJ. KEEP LV 0 MOTION EST. [mm]mm[ 0 SIGNAL OUT OFF RETURN

- DET. SETTING

• SENSITIVITY: Adjust from 0\~20 by using joystick left or right.
  • OBJ. KEEP LV: Adjust from 0\~60 by using joystick left or right.
  • MOTION EST: Adjust from 0\~20 by using joystick left or right.
  • SIGNAL OUT : You can select ON / OFF
  • RETURN

• WINDOW TONE: Adjust from 0\~6 by using joystick left or right.

• WINDOW ZONE: Adjust from 0\~4 by using joystick left or right.
• WINDOW USE : You can select ON / OFF
• DET H-POS: Adjust from 0\~60 by using joystick left or right.
• DET V-POS: Adjust from 0\~40 by using joystick left or right.
• DET H-SIZE: Adjust from 0\~40 by using joystick left or right.
• DET V-SIZE: Adjust from 0\~40 by using joystick left or right.
• RETURN

MOTION MOTION OFF ALARM QUICK ZOOM OFF RETURN

ALARM SHAKING ON SHAKE SCALE [0][0][1] 10 BRIGHT CHG ON BRIGHT SCL [0][0][3] RETURN

OSD OPERATION

- ALARM

• SHAKING : You can select ON / OFF
- SHAKE SCALE: Adjust from 0\~20 by using joystick left or right.
• BRIGHT CHG : You can select ON / OFF
• BRIGHT SCL: Adjust from 0\~20 by using joystick left or right.
- RETURN

■ MOTION MOTION OFF ALARM ↓ QUICK ZOOM ON ↓ RETURN

QUICK ZOOM MOVING 30 / 60sec ZOOM IN 30 / 60sec STANDBY 30 / 60sec SYNCHRONOUS OFF TRACKING OFF REPEAT OFF RETURN

- QUICK ZOOM

• MOVING : 0/60sec \~240/60sec
• ZOOM IN : 0/60sec \~240/60sec
• STANDBY : 0/60sec \~240/60sec
• SYNCHRONOUS : You can select ON / OFF
• TRACKING : You can select ON / OFF
- REPEAT: You can select ON / OFF
• RETURN

OSD OPERATION

SYSTEM

MANU EXPOSURE WHITE BAL IMAGE BACKLIGHT DAY&NIGHT DNR MOTION SYSTEM EXIT

* SYSTEM SERIAL GAMMA 0,55 PEDESTAL |mm|mm|8 VIEW ANGLE WIDE 4:3 CVBS NTSC LANGUAGE ENG FOCUS ADJ FACTORY SET ON! RETURN

- SERIAL: N/A

SERIAL CAM ID 1 BAUDRATE 115200 RETURN

• CAM D
  : You can select ID from 0 to 255 when using remote control.

• BAUDRATE
  : 2400, 4800, 9600, 57600, 115200

• GAMMA : You can select (0.45 / 0.5 / 0.55 / 0.6 / 0.65)

• PEDESTAL: Adjust from 0\~20 by using joystick left or right.
• VIEW ANGLE: You can select (WIDE 4:3 / WIDE 16:9 / NORMAL)
• CVBS : You can select (NTSC / PAL)
• LANGUAGE : ENG / CHN / CHN(S) / JPN / KOR /
• FOCUS ADJ

ENTER - RETURN

After entering FOCUS ADJ a box with 3 different boxes within will appear on screen. Each box is to aid in focusing of different scene contrasts, LEFT box for low contrast MIDDLE box for medium contrast and RIGHT box for high contrast. Adjust focus so no green will be in box of selected contrast.

- FACTORY SET : Factory initialize

- RETURN

DIMENSIONS

VTD-A2812/VM

VTD-AR2812/VM

SPECIFICATIONS

VTD-A2812/VM

Image Device 1/2.9" CMOS Sensor

Resolution 1000 TV Lines

Min. Illumination 0.1 Lux (B/W) / 1.0 Lux (Color)

Effective Pixels 1305 x 1049 (1.39 MegaPixel)

S/N Ratio More Than 52dB (AGC Off)

Smart Motion Zoom YES

3D DNR YES

Defog YES

Standard Lens Varifocal 2.8-12mm IR Corrected

Power Source Dual Voltage 12VDC/24VAC Operation

Power Consumption (12VDC) 210 mA

Power Consumption (24VAC) 230 mA

Environmental 14°F~122°F (-10°C~50°C) at 30%~80% RH

Dimensions 5.45" x 3.7" (138.30mm x 93.76mm)

Weight 0.62lbs (272g)

SPECIFICATIONS

VTD-AR2812/VM

Image Device 1/2.9" CMOS Sensor
Resolution 1000 TV Lines
Min. Illumination	0.1 Lux (B/W) / 1.0 Lux (Color) / 0 Lux with IR LEDs On
Effective Pixels 1305 x 1049 (1.39 MegaPixel)
S/N Ratio More Than 52dB (AGC Off)
Smart Motion Zoom YES
3D DNR YES
Defog YES
Standard Lens Varifocal 2.8-12mm IR Corrected
Power Source Dual Voltage 12VDC/24VAC Operation
Power Consumption (12VDC) 210ma / 800ma (IR OFF/ON)
Power Consumption (24VAC) 230ma / 760ma (IR OFF/ON)
Environmental 14°F~122°F (-10°C~50°C) at 30%~80% RH
Dimensions 5.45" x 3.7" (138.30mm x 93.76mm)
Weight 0.62lbs (272g)

NOTES

VITEK LIMITED PRODUCT WARRANTY

VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a Vitek Authorized Reseller.

The product must have been used only for its intended purpose, and not been subjected to damage by misuse, wilful or accidental damage, caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the guarantee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become necessary.

VITEK makes no warranty or guarantee whatsoever with respect to products sold or purchased through unauthorized sales channels. Warranty support is available only if product is purchased through a VITEK Authorized Reseller.

VITEK® INDUSTRIAL VIDEO PRODUCTS, INC.

28492 CONSTELLATION ROAD VALENCIA, CA 91355

WWW.VITEKCCTV.COM

Version 3.0

September 2016

3700-8622A