32FS2RMB - TV LG - Free user manual and instructions

USER MANUAL 32FS2RMB LG

Colour Television OWNER'S MANUAL

Please read this manual carefully before operating your set. Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this information to your dealer when you require service.

Model number :

Serial number :

P/NO : 3828VA0573A (MC035E, 136V/007B TX) ©

Contents

Installation 3

Location and function of controls 4

Remote control handset

Battery installation

Front panel / Side panel

Basic operation 7

On and off / Programme selection

Volume adjustment / Quick view

Mute function / Auto Demonstration

On screen language selection (option)

On screen menus 8

Menu selection

Setting up TV stations 9

Auto programme tuning

Manual programme tuning

Fine Tuning / Programme edit

Favourite programme

Calling the programme table

Picture adjustment 14

PSM (Picture Status Memory)

DRP (Digital Reality Picture)

XD / Picture adjustment / Eye (option)

Turbo picture selection (option)

Picture format

Sound adjustment 18

SSM (Sound Status Memory) / Sound adjustment

X-WAVE (Wireless Sound) (option)

Turbo sound selection (option)

Sound output selection / Stereo/Dual reception

NICAM reception (option)

Time setting 21

Setting the clock / Setting the On/Off timer

Auto sleep

Other functions 22

TV and AV modes / Auto AV switching (option)

Child lock / Blue back (option)

Tilt / Degaussing (option) / Sleep timer

PIP operation (option) 24

On and off / Input mode selection for sub picture

Swapping between main and sub pictures

Programme selection for sub picture

Sub picture size / Sub picture freeze

Sub picture position change

Teletext (option) 25

Switch on/off

SIMPLE text / TOP text (option)

FASTEXT / Special teletext functions

Connection of PC 28

RGB PC mode (option) / PC in socket (option)

Connection of external equipment 29

Aerial socket

Audio/Video in/out sockets (option)

Euro scart sockets (option)

S-Video/Audio in sockets (S-AV) (option)

Component in sockets

DTV in sockets / Monitor out sockets

Audio out sockets (AUDIO OUT) (option)

Headphone socket (option)

Troubleshooting check list

Installation

Power

This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.

Warning

To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock.

Service

Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked 1175 Ω on the back cover. For the best reception an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. You can install the set to the rack.

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Location and function of controls

All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set.

Remote control handset

Before you use the remote control handset, please install the batteries. See the next page.

POWER EYE * TVW SOUND TURBO PICTURE PIP TEXT PR PR + SWAP INPUT MENU PB MUTE VOL VOL PR 1 2 3 4 5 6 7 R 9 RSM 0 RSM 8 9 SLEEP LIST MAIN STILL INDE REF VIEW REC STOP Q VIEW REW PLAY FF SIZE STILL ARC RIGHT ON MIX TIME REVEAL MODED

( With TELETEXT)

-13 ^1 . POWER switches the set on from standby or off to standby.
-142. EYE/* (option) switches the eye function on or off.
3. TURBO SOUND BUTTON selects Turbo sound.
4. PIP BUTTONS (option)
PIP

switches the sub picture on or off.

PR +/-

selects a programme for the sub picture.

SWAP

alternates between main and sub picture. INPUT

selects the input mode for the sub picture.

SIZE

adjusts the sub picture size.

STILL

freezes motion of the sub picture.

POSITION

relocates the sub picture in clockwise direction.

1. MENU

selects a menu.

1. ▲ / ▼ (Programme Up/Down)
   selects a programme or a menu item.
   switches the set on from standby.
   ◀ / ▶ (Volume Up/Down)
   adjusts the volume.
   adjusts menu settings.
   OK
   accepts your selection or displays the current mode.
2. NUMBER BUTTONS
   switches the set on from standby or directly select a number.
3. PSM (Picture Status Memory)
   recalls your preferred picture setting.
4. SLEEP
   sets the sleep timer.
5. I/II
   selects the language during dual language broadcast. selects the sound output (option).
6. MAIN STILL
   freezes motion of the picture.
7. VCR BUTTONS
   control a LG video cassette recorder.

Location and function of controls

13. TV/AV

selects TV or AV mode.

switches the set on from standby.

14. TURBO PICTURE BUTTON

selects Turbo picture.

15. TELETEXT BUTTONS (option)

These buttons are used for teletext.

For further details, see the 'Teletext' section.

16. MUTE

switches the sound on or off.

17. SSM (Sound Status Memory)

recalls your preferred sound setting.

18. LIST

displays the programme table.

19. INDEX/\* (option)

switches LED DISPLAY on or off.

20. FAVOURITE

selects a favourite programme.

21. Q.VIEW

returns to the previously viewed programme.

22. ARC (Aspect Ratio Control)

changes the picture format.

\* : No function

COLOURED BUTTONS : These buttons are used for teletext (only TELETEXT models) or programme edit.

Battery installation

The remote control handset is powered by two AAA type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols (⊕ and ⊖) marked inside the compartment.

Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time.

POWER EYE:* TVW 13 SOUND TURBO PICTURE 14 RP * PR PR + SWAP INPUT MENU PR MUTE 16 VOL VOI PR 7 2 4 5 6 7 8 9 RSM 0 RSM 17 VI SLEEP LIST 18 MAIN STILL INDE SAW KATO 19 REC STOP Q VIEW 20 REW PLAY FE 21 SIZE STILL ARC 22 POSITION

( Without TELETEXT)

Location and function of controls

Front panel

29/32FS1 series 1 52 3 4

29/32FS2 series 1 2 5 7 3 4

Side panel

1. MAIN POWER (ON/OFF) switches the set on or off.

2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on.

3. MENU selects a menu.

4. OK accepts your selection or displays the current mode.

◀ / ▶ (Volume Down/Up)
adjusts the volume. adjusts menu settings.
▲ / ▼ (Programme Up/Down) selects a programme or a menu item. switches the set on from standby.

1. REMOTE CONTROL SENSOR

2. AUDIO/VIDEO IN SOCKETS (AV3) Connect the audio/video out sockets of external equipment to these sockets. S-VIDEO/AUDIO IN SOCKETS (S-AV) Connect the video out socket of an S-VIDEO VCR to the S-VIDEO socket. Connect the audio out sockets of the S-VIDEO VCR to the audio sockets as in AV3.

3. EYE (option) adjusts picture according to the surrounding conditions.
4. HEADPHONE SOCKET Connect the headphone plug to this socket.
5. PC INPUT SOCKET (option) Connect the monitor output socket of the PERSONAL COMPUTER to this socket. Note : Set the resolution of PC to VGA 640x480 (60 Hz) video mode to use this set as PC monitor.

Basic operation

On and off

1. Press the main power button to switch the set on.
2. If the set is in standby mode, press the POWER, ▲ / ▼, TV/AV or NUMBER buttons on the remote control handset to switch it on fully.
3. Press the POWER button on the remote control handset. The set reverts to standby mode.
4. Press the main power button again to switch the set off.

Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket.

Programme selection

You can select a programme number with the ▲ / ▼ or NUMBER buttons.

Volume adjustment

Press the ◀ / ▶ button to adjust the volume.

Quick view

Press the Q.VIEW button to view the last programme you were watching.

Mute function

Press the MUTE button. The sound is switched off and the display ✗ appears.

You can cancel it by pressing the MUTE, ◀ / ▶, SSM, I/II, TURBO SOUND button.

Auto Demonstration

To review all the menus programmed in the set, press the OK button of the panel control for about 10 seconds. To stop auto demonstration, press any button of the panel control or POWER button of the remote control.

On screen language selection (option)

The menu can be displayed on the screen in desired language. First select your language.

1. Press the MENU button and then ▲ / ▼ button to select the Special menu.
2. Press the ▶ button and then ▲ / ▼ button to select Language.
3. Press the ▶ button and then ▲ / ▼ button to select your desired language.
   All the on screen displays will appear in the selected language. Press the OK or ◀ button to select the Special menu.
4. Repeatedly press the MENU button to return to normal TV viewing.

POWER TV:AV SOUND TURBO MENU PR MUTE VOL VOL PR 1 2 3 4 5 6 7 8 9 0 SSM VII Q VIEW

On screen menus

The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed.

Menu selection

1. Press the MENU button and then ▲ / ▼ button to display each menu.
2. Press the ▶ button and then ▲ / ▼ button to select a menu item.
3. Press the ▶ button to display the sub menu or the pull-down menu.
4. Change the setting of an item in the sub or pull-down menu with ▶ / ▶ or ▲ / ▼. You can move to the higher level menu with OK or ▶ button and to move to the lower level menu press the ▶ button.

Note

a. In the teletext mode, menus are not displayed.
b. In some models, the Normal/Turbo search will not display, only the Start will display in the Auto programme menu.
c. On some models, the Language, X-WAVE will not display.

MENU PR VOL VOL PR

graph TD
    A["Station"] --> B["Auto programme"]
    A --> C["Picture"]
    A --> D["Sound"]
    A --> E["Time"]
    A --> F["Special"]
    B --> G["Storage"]
    C --> H["Channel"]
    C --> I["Search"]
    C --> J["Monitor"]
    D --> K["Delete"]
    D --> L["Copy"]
    D --> M["Skip"]
    E --> N["Clock"]
    E --> O["Off time"]
    E --> P["On time"]
    E --> Q["Auto clock"]
    F --> R["Language"]
    F --> S["Input"]
    F --> T["Child lock"]
    F --> U["Blue back"]
    F --> V["Title"]
    F --> W["Degree"]
    G --> X["DC MENU"]
    H --> Y["DC MENU"]
    I --> Z["DC MENU"]
    J --> AA["DC MENU"]
    K --> AB["DC MENU"]
    L --> AC["DC MENU"]
    M --> AD["DC MENU"]
    N --> AE["DC MENU"]
    O --> AF["DC MENU"]
    P --> AG["DC MENU"]
    Q --> AH["DC MENU"]
    R --> AI["DC MENU"]
    S --> AJ["DC MENU"]
    T --> AK["DC MENU"]
    U --> AL["DC MENU"]
    V --> AM["DC MENU"]
    W --> AN["DC MENU"]

Setting up TV stations

Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the ▲ /▼ or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes.

Note : In some models up to 200 TV stations can be stored.

Auto programme tuning

All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.

1. Press the MENU button and then ▲ / ▼ button to select the Station menu.
2. Press the ▶ button and then ▲ / ▼ button to select Auto programme.
3. Press the ▶ button to display the Auto programme menu.

Auto programme System ✓ 8G Storage from I Normal search OK Turbo search M OK MOV

1. Press the ▶ button. Select a TV system with the ▲ / ▼ button on the System pull-down menu;

BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa)

DK : (East Europe/China/Africa/CIS)

M : (USA/Korea/Philippines) (option)

1. Press the ◀ button.

2. Press the ▲ / ▼ button to select Storage from.

3. Press the ▶ button. Select the beginning programme number with the ◀ / ▶ button or NUMBER buttons on the Storage from pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
4. Press the OK button.
5. Press the ▲ / ▼ button to select Normal or Turbo search.

Option: In some models, you can only select Start.

Note :

a. Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the system again in the Manual programme menu.
10. Press the ▶ button to begin auto programming.

Auto programme System Storage free Normal search Turbo search C:01 (80) 7 36% MENU

(Normal search)

Auto programme Systems Storage free Normal search Turbo search C 01 (86) 7 36% HONG

(Turbo search)

All receivable stations are stored.

To stop auto programming, press the MENU button.

When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme.

1. Repeatedly press the MENU button to return to normal TV viewing.

MENU PR VOL VOL PR 1 2 3 4 5 6 7 8 9 0

Setting up TV stations

MENU PR VOL VOL PR 1 2 3 4 5 6 7 8 9 0

Manual programme tuning

Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number.

1. Press the MENU button and then ▲ / ▼ button to select the Station menu.
2. Press the ▶ button and then ▲ / ▼ button to select Manual programme.
3. Press the ▶ button to display the Manual programme menu.

Manual programme Storage System Channel Fine Search Name Booster

1. Press the ▲ / ▼ button to select Storage.
2. Press the ▶ button to select the programme number. Select the desired programme number (0 to 99) with the ◀ / ▶ button or NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
3. Press the ◀ button.
4. Press the ▲ / ▼ button to select System.
5. Press the ▶ button. Select a TV system with the ▲ / ▼ button on the System pull-down menu;

BG : (Asia/New Zealand/M.East/Africa/Australia)

I : (Hong Kong/South Africa)

DK : (East Europe/China/Africa/CIS)

M : (USA/Korea/Philippines) (option)

1. Press the OK or ◀ button.

2. Press the ▲ / ▼ button to select Channel.

3. Press the ▶ button. Press the ▲ / ▼ button to select V/UHF or Cable on the Channel pull-down menu. If possible, select the channel number directly with the number buttons. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
4. Press the OK or ◀ button.
5. Press the ▲ / ▼ button to select Search.
6. Press the ▶ button. Press the ◀ / ▶ button to commence searching on the Search pull-down menu. If a station is found the search will stop.
7. Press the OK button to store it. The display Stored will appear.

Manual programme Storage System Channel Fine Search Name Receptor Stored

1. To store another station, repeat steps 4 to 15.
2. Repeatedly press the MENU button to return to normal TV viewing.

Setting up TV stations

Assigning a station name

1. Repeat the 'Manual programme tuning' steps 1 to 3.
2. Press the ▲ / ▼ button to select Name
3. Press the ▶ button on the Name pull-down menu.
4. Press the ▲ button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z.

With the ▼ button you can select in the opposite direction.

1. Select the position by pressing the ◀ / ▶ button and then take your choice of the second character, and so on.
2. Press the OK button.
3. Repeatedly press the MENU button to return to normal TV viewing.

Booster (option)

In some models, Booster is an optional function. Only a set with Booster can perform this function.

If the reception is poor at the fringe area of TV signal, select Booster to On. When the picture condition is good, do not select Booster to On.

1 Repeat the 'Manual programme tuning' steps 1 to 3.
2. Press the ▲ / ▼ button to select Booster.
3. Press the ▶ button.
4. Press the ▲ / ▼ button to select On or Off on the Booster pull-down menu.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV viewing.

Fine tuning

Normally fine tuning is only necessary if reception is poor.

1 Repeat the 'Manual programme tuning' steps 1 to 3.
2. Press the ▲ / ▼ button to select Fine.
3. Press the ▶ button.
4. Press the ◀ / ▶ button to fine tune for the best picture and sound on the Fine pull-down menu.

Manual programme Storage System Channel Plane Search New Booster

1. Press the OK button.
2. Repeatedly press the MENU button to return to normal TV viewing.

The finely tuned programme will be indicated by yellow number during programme selection.

MENU PR VOL VOL PR

Setting up TV stations

MENU PR VOL VOL PR 1 2 3 4 5 6 7 8 9 0

Programme edit

This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number.

1. Press the MENU button and then ▲ / ▼ button to select the Station menu.

2. Press the ▶ button and then ▲ / ▼ button to select Programme edit.

3. Press the ▶ button to display the Programme edit menu.

Deleting a programme

1. Select a programme to be deleted with the ▲ / ▼ or ◀ / ▶ button.

2. Press the RED button twice.

The selected programme is deleted, all the following programmes are shifted up one position.

Copying a programme

1. Select a programme to be copied with the ▲ / ▼ or ◀ / ▶ button.

2. Press the GREEN button.

All the following programmes are shifted down one position.

Moving a programme

1. Select a programme to be moved with the ▲ / ▼ or ◀ / ▶ button.

2. Press the YELLOW button.

3. Move the programme to the desired programme number with the ▲ / ▼ or ◀ / ▶ button.

4. Press the YELLOW button again to release this function.

Skipping a programme number

1. Select a programme number to be skipped with the ▲ / ▼ or ◀ / ▶ button.

2. Press the BLUE button. The skipped programme turns to blue.

3. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the ▲ / ▼ button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.

Repeatedly press the MENU button to return to normal TV viewing.

Setting up TV stations

Favourite programme

This function lets you select your favorite programmes directly.

1. Press the MENU button and then ▲ / ▼ button to select the Station menu.

2. Press the ▶ button and then ▲ / ▼ button to select Favourite programme.

3. Press the ▶ button to display the Favourite programme menu. Station

Auto programs Manual programs Programme multi Favorite programs

1. Press the ▲ / ▼ button to select -- ----

2. Select a desired programme with the ◀ / ▶ button or NUMBER buttons. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.

3. To store another programme, repeat steps 4 to 5. You can store up to 8 programmes.

4. Press the OK button.

5. Repeatedly press the MENU button to return to normal TV viewing.

Repeatedly press the FAVOURITE button to select stored favourite programmes.

Calling the programme table

You can check the programmes stored in the memory by displaying the programme table.

Displaying programme table

Press the LIST button to display the Programme table menu.

The programme table appears on the screen. One programme table contains ten programmes as below.

Note :

a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode.

b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.

Selecting a programme in the programme table

Select a programme with the ▲ / ▼ or ◀ / ▶ button.

Then press the OK button.

The set switches to the chosen programme number.

Paging through a programme table

There are 10 (or 20) programme table pages which contain 100 (or 200) programmes.

Pressing the ▲ / ▼ or ◀ / ▶ button repeatedly turns the pages.

Press the LIST button to return to normal TV viewing.

MENU PR VOL VOL PR 1 2 3 4 5 6 7 8 9 0 LIST FAVOLRITE

Picture adjustment

MENU PR VOL VOL PR PSM

PSM (Picture Status Memory)

1. Press the MENU button and then ▲ / ▼ button to select the Picture menu.
2. Press the ▶ button and then ▲ / ▼ button to select PSM.
3. Press the ▶ button and then ▲ / ▼ button to select a picture

Picture PGM REP XD Contrast Brightness Colour Sharpness Dynamic Standard Mild Demp User OK MENU

setting on the PSM pull-down menu.

1. Press the OK or ◀ button.
2. Repeatedly press the MENU button to return to normal TV viewing.

You can also recall a desired picture (Dynamic, Standard, Mild, Game or User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed.

DRP (Digital Reality Picture)

1. Press the MENU button and then ▲ / ▼ button to select the Picture menu.
2. Press the ▶ button and then ▲ / ▼ button to select DRP.
3. Press the ▶ button and then ▲ / ▼ button to select Pro or 100 on the DRP pull-down menu.

Picture RGB DMP AD Contress Brightness Colour Sharpness Pro 100 4 OK MINI

1. Press the OK or ◀ button.
2. Repeatedly press the MENU button to return to normal TV viewing.

Note : DRP is always set to Pro in case of NTSC input, double window mode.

Picture adjustment

XD

You can enjoy the vivid and hi-definition picture with LG's excellent Digital Reality processor technology.

1. Press the MENU button and then ▲ / ▼ button to select the Picture menu.
2. Press the ▶ button and then ▲ / ▼ button to select XD.
3. Press the ▶ button and then ▲ / ▼ button to select On or Off on the XD pull-down menu.
4. Press the OK or ◀ button.
5. Repeatedly press the MENU button to return to normal TV viewing.

Picture adjustment

You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) to the levels you prefer.

1. Press the MENU button and then ▲ / ▼ button to select the Picture menu.
2. Press the ▶ button and then ▲ / ▼ button to select Contrast, Brightness, Colour or Sharpness.

Picture PGM GDP HD Contrast Brightness Colour Sharpness 100 OK OK

1. Press the ▶ button and then ◀ / ▶ button to make appropriate adjustments on the each sub menu.

1. Press the OK button to store it for the picture user.

2. Repeatedly press the MENU button to return to normal TV viewing.

Picture PSH CRP KO Contrast Brightness Colour Sharpness any 48 OK MENU

MENU PR VOL VOL PR

Picture adjustment

Eye (option)

Eye is an optional function. Only a set with eye option can perform this function.

In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings.

Press the EYE/* button to switch the eye function on or off.

EYE TURBO PICTURE PSM

Off

Blank white image with a small decorative icon in the bottom-right corner (no text or symbols)

When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.

At this time the display •••••• in green does not appear continuously but the display ••••••• in yellow appears each time the picture condition changes.

Note : If you press the PSM or TURBO PICTURE button with the eye function, the eye function is automatically switched off.

Turbo picture selection (option)

When this function is on, the picture will be more brilliant and distinct than normal picture.

Repeatedly press the TURBO PICTURE button to switch on or off.

(Turbo Picture off)

(Turbo Picture on)

Note : If you press the PSM button with the Turbo picture function, the Turbo picture function is automatically switched off.

Picture adjustment

Picture format

You can watch TV in various picture formats; 4:3, 16:9 (Wide) or Zoom.

In some models, you can watch TV in various picture formats; 4:3, 16:9 (Wide), 14:9, Zoom or Auto.

Repeatedly press the ARC button to select your desired picture format.

4:3

This picture format is 4 to 3 of general TV.

16:9

You can enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode.

14:9 (option)

You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 is magnified to the upper / lower and left / right. You can move the screen up or down with ▲ / ▼ button.

Zoom

You can enjoy the cinema in a vast screen through the Zoom mode. The screen 4:3 is magnified to the upper/lower and left/right sides so that the screen 16:9 is full. The bottom and top of the picture may be lost. In some models, you can move the screen up or down with ▲ / ▼ button.

Auto (option)

When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.

Note :

a. In the PC and 1/2 PIP modes, ARC function isn't available. b. In some models, ARC function isn't available in Component modes.

PR PR ARC

Sound adjustment

MENU PR VOL VOL PR SSM

SSM (Sound Status Memory)

You can select your preferred sound setting; Dolby Virtual, Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer.

1. Press the MENU button and then ▲ / ▼ button to select the Sound menu.
2. Press the ▶ button and then ▲ / ▼ button to select SSM.
3. Press the ▶ button and then ▲ / ▼ button to select a sound setting on the SSM pull-down menu.

Sound SSM Balance O Value X-MOVE Delays Virtual Play Music Movie Speaker User OK MENU

Dolby Virtual

Dolby Virtual lets you experience panoramic effects of sound.

Sound Frequency Adjustment

a. Press the ▶ button in User to display the User sub menu.

AP 49 DE MENU

b. Select a sound band by pressing the ◀ / ▶ button.
c. Make appropriate sound level with the ▲ / ▼ button.
d. Press the OK button to store it for the sound User.

Repeatedly press the MENU button to return to normal TV viewing.

You can also recall a desired sound (Dolby Virtual, Flat, Music, Movie, Speech or User) with SSM button on the remote control. The sound Dolby Virtual, Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed.

Note : If you press the SSM button after making appropriate adjustment on the User sub menu, the display User automatically appears even though you have already set a factory preset setting; Dolby Virtual, Flat, Music, Movie or Speech.

Sound adjustment

Sound adjustment

You can adjust balance, AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume level even if you change programmes. If you switch DBS to on, the set creates a dynamic bass sound. The Turbo sound creates an all around sound as in a concert hall.

1. Press the MENU button and then ▲ / ▼ button to select the Sound menu.
2. Press the ▶ button and then ▲ / ▼ button to select the desired sound item; AVL, DBS, Balance or ○ Volume.
3. Make desired adjustment with the ◀ / ▶, ▲ / ▼ or OK button on each pull-down menu.

Sound SSN AVL CAB Balance Qustue X-MOVE OK MENU

1. Repeatedly press the MENU button to return to normal TV viewing.

Note : In Dolby Virtual mode, AVL or DBS is not available.

X-WAVE (Wireless Sound) (option)

You can also listen to the sound through the FM receiver.

1. Press the MENU button and then ▲ / ▼ button to select the Sound menu.
2. Press the ▶ button and then ▲ / ▼ button to select X-WAVE.
3. Press the ▶ button and then ▲ / ▼ button to tune in a frequency on the X-WAVE pull-down menu.

Sound 80M AVL CBS Balance Volume X-MAVE 97.7 MHz 87.3 MHz 86.1 MHz 85.3 MHz 85.3 MHz 85.3 MHz 85.3 MHz Off or 106.7 MHz 106.5 MHz 107.1 MHz 107.3 MHz 107.5 MHz 107.7 MHz 107.5 MHz 107.5 MHz Off

1. Match the TV's frequency and the FM receiver's.

Turbo sound selection (option)

When this function is on, the sound will be more emphasized and amplified than normal sound.

Repeatedly press the TURBO SOUND button to switch on or off.

(Turbo Sound off)

(Turbo Sound on)

SOUND TURBO MENU PR VOL VOL PR

Sound adjustment

Sound output selection

In AV mode, you can select output sound for the left and right loudspeakers.

Repeatedly press the I/II button to select the sound output.

L+R : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right loud-speakers.
R+R : Audio signal from audio R input is sent to left and right loud-speakers.

Stereo/Dual reception

When a programme is selected, the sound information for the station appears after the programme number and station name disappear.

Broadcast

On Screen Display

Mono

MONO

Stereo

STEREO

Dual

DUAL I

Line drawing of a multi-tiered remote control tower with ventilation grilles and a central hub (no text or symbols)

Mono sound selection

In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again.

Language selection for dual language broadcast

If a programme received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.

DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the loudspeakers.

DUAL I+II sends a separate language to each loudspeaker.

NICAM reception (option)

If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.

Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly.

1. When NICAM mono is received, you can select NICAM MONO or FM MONO.
2. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono.
3. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen.

Time Setting

Setting the clock

1. Press the MENU button and then ▲ / ▼ button to select the Time menu.
2. Press the ▶ button and then ▲ / ▼ button to select Clock.
3. Press the ▶ button and then ▲ / ▼ button to adjust the hour.
4. Press the ▶ button and then ▲ / ▼ button to adjust the minute.

Time Clock Off time Run time Auto sleep

1. Press the OK button.
2. Repeatedly press the MENU button to return to normal TV viewing.

Setting the On/Off timer

By using this function, the set automatically switches on or off at a preset time. You must set the time correctly before using on/off time function.

1. Press the MENU button and then ▲ / ▼ button to select the Time menu.
2. Press the ▶ button and then ▲ / ▼ button to select Off time/On time.
3. Press the ▶ button and then ▲ / ▼ button to adjust the hour.

Time Clock Off time On-time Auto sleep Pr 1 Vol.30 Off AV 45 OK MENU

1. Press the ▶ button and then ▲ / ▼ button to adjust the minute.
2. Only On time function: Press the ▶ button and then ▲ / ▼ button to adjust programme number and volume level.
3. Press the OK button.
4. Repeatedly press the MENU button to return to normal TV viewing.

Note :

a. On time works only in standby mode.
b. To view the remaining on/off time, select the Time menu.
c. When you switch the main power off, the Clock is reset and the On/Off time is off.

Auto sleep

If you select On on the Auto sleep pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.

1. Press the MENU button and then ▲ / ▼ button to select the Time menu.
2. Press the ▶ button and then ▲ / ▼ button to select Auto sleep.
3. Press the ▶ button and then ▲ / ▼ button to select On or Off on the Auto sleep pull-down menu.
4. Repeatedly press the MENU button to return to normal TV viewing.

MENU PR VOL PR

Other functions

TV/AV MENU PR ▲ VOL ▲ PR ▼ 1 2 3 4 5 6 7 8 9 0

TV and AV modes

Inputs can be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set.

Note: When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section.

1. Press the MENU button and then ▲ / ▼ button to select the Special menu.
2. Press the ▶ button and then ▲ / ▼ button to select Input.
3. Press the ▶ button and then ▲ / ▼ button to select TV, AV1, AV2, AV3, AV4 (option), COMPONENT1 or COMPONENT2 or RGB PC (option) on the Input pull-down menu.

Special Language Input Visible lock Blue Back Tilly Deguate TU M1 M2 M3 M4 M5 COMPONENT1 COMPONENT2

AV1 : VCR connected to the AV1 sockets on the set.

AV2 : VCR connected to the AV2 sockets on the set.

AV3 : VCR connected to the AV3 sockets on the set.

AV4 : VCR connected to the Euro scart socket on the set (option) COMPONENT 1/2 : DVD or SET-TOP Box connected to the COMPONENT 1/2 sockets on the set RGB PC : PERSONAL COMPUTER connected to the PC INPUT socket on the set (option)

1. Repeatedly press the MENU button to return to normal TV viewing.
   Alternatively you can select the TV or AV mode by pressing the TV/AV button.
   In AV mode, to return to TV mode, press the ▲ / ▼ or NUMBER buttons.

Auto AV switching (option)

If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is automatically switched to AV4 mode when an AV signal is input. But if you want to keep on watching TV mode, press the ▲ /▼ or NUM-BER buttons. Press the TV/AV button to return to AV modes.

Child lock

The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing.

1. Press the MENU button and then ▲ / ▼ button to select the Special menu.
2. Press the ▶ button and then ▲ / ▼ button to select Child lock.
3. Press the ▶ button and then ▲ / ▼ button to select On or Off on the Child lock pull-down menu.
4. Repeatedly press the MENU button to return to normal TV viewing.

With the lock on, the display Child lock on appears on the screen if any button on the front panel is pressed while viewing the TV.

Note : The display Child lock on will not appear on the screen if any button on the front panel is pressed while displaying the menus.

Other functions

Blue back (option)

If you select On on the Blue back pull-down menu, the blue background appears on the screen when there is no or poor signal.

1. Press the MENU button and then ▲ / ▼ button to select the Special menu.
2. Press the ▶ button and then ▲ / ▼ button to select Blue back.
3. Press the ▶ button and then ▲ / ▼ button to select On or Off on the Blue back pull-down menu.
4. Repeatedly press the MENU button to return to normal TV viewing.

Note : The blue background automatically appears on the screen when there is no signal in AV mode.

Tilt

The TV picture may tilt to the left or right if the TV set moves to another position. This function can be used to compensate the tilt.

1. Press the MENU button and then ▲ / ▼ button to select the Special menu.
2. Press the ▶ button and then ▲ / ▼ button to select Tilt.
3. Press the ▶ button and then ◀ / ▶ button to adjust the tilt on the Tilt pull-down menu.
4. Repeatedly press the MENU button to return to normal TV viewing.

Degaussing (option)

Owing to the super large Tube in the set. The colour purity of the picture may be affected by other magnetic influences such as speakers. Stripes may appear on the screen or there may be colour patches.

1. Press the MENU button and then ▲ / ▼ button to select the Special menu.
2. Press the ▶ button and then ▲ / ▼ button to select Degauss.
3. Press the ▶ button and then ▲ / ▼ button to select On on the Degauss pull-down menu. After the degauss function works, On mode switches to Off mode.
4. Repeatedly press the MENU button to return to normal TV viewing.

Note : If you cannot adjust the screen condition by degaussing, try it again after about 4 minutes.

Sleep timer

You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses.

Press the SLEEP button to select the number of minutes. The display ⏻--- will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected.

Note :

a. To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button until the display ⏻ ... appears.
c. When you switch the set off, the set releases the preset sleep time.

MENU PR VOL VOL PR SLEEP

PIP operation (option)

Option :

PIP is an optional function, so that only the set with PIP function can operate.

PIP (Picture in Picture) displays a picture within a picture.

On and off

Press the PIP button to switch on the sub picture. press this button again to switch it off.

Input mode selection for sub picture

Press the INPUT button to select the input mode for the sub picture.

Each time this button is pressed, each input mode for the sub picture is displayed as shown below.

Note : Yon can select the input mode for the sub picture, after connecting the external equipment.

Swapping between main and sub pictures

Press the SWAP button to exchange the main and sub pictures.

Programme selection for sub picture

Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.

Sub picture size

Repeatedly press the SIZE button to select the desired sub picture size. The sub picture appears as below.

Note : When the sub picture size is 1/2 of the main picture, the picture quality might get poor.

Sub picture freeze

Press the STILL button to freeze motion of the sub picture. Press this button again to restore motion.

Sub picture position change

Press the POSITION button repeatedly until desired position is achieved. The sub picture moves clockwise.

Teletext (option)

Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast.

Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.

The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

Switch on/off

Press the TEXT button to switch to teletext.

The initial page or last page appears on the screen.

Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.

Press the TEXT button to switch off teletext. The previous mode reappears.

SIMPLE text

Page selection

1. Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number.

2. The ▲ / ▼ button can be used to select the preceding or following page.

Programming a colour button in LIST mode (option)

If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the ☐ button to switch to LIST mode.

Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding coloured button on the remote control handset.

1. Press a coloured button.

2. Using the NUMBER buttons, select the page you wish to programme.

3. Press the OK button. Then the selected page is stored as the selected page number with blinking once. From now on, you can select this page with the same coloured button.

4. The three other coloured buttons are programmed in the same way.

TEXT PR PR 1 2 3 4 5 6 7 8 9 0

Teletext (option)

TOP text (option)

The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.

Block / group / page selection

1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the ▲ button can be used.
4. The red button permits to return to previous selection. Alternatively the ▼ button can be used.

Direct page selection

Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.

FASTEXT

The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.

Page selection

1. Press the ☐ button to select the index page.
2. You can select the pages which are colour coded along the bottom line with the same coloured buttons.
3. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
4. The ▲ / ▼ button can be used to select the preceding or following page.

PR PR 1 2 3 4 5 6 7 8 9 0 ED

Teletext (option)

Special teletext functions

REVEAL

Press this button to display concealed information, such as solutions of riddles or puzzles.

Press this button again to remove the information from the display.

SIZE

Selects double height text.

Press this button to enlarge the top half of the page.

Press this button again to enlarge the bottom half of the page.

Press this button again to return to the normal display.

UPDATE

Displays the TV picture on the screen while waiting for the new teletext page. The display Ⓗ will appear at the top left hand corner of the screen. When the updated page is available then display Ⓗ will change to the page number.

Press this button to view the updated teletext page.

HOLD

Stops the automatic page change which will occur if a tele-text page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited.

To continue press this button again.

MIX Dion

MIX

Displays the teletext pages superimposed on the TV picture.

To switch the TV picture off press this button again.

TIME

When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED / GREEN, ▲ / ▼ button.

Press this button again to exit this function.

PR PR

Connection of PC

TWAV MENU PR VOL VOL PR

PERSONAL COMPUTER

RGB PC mode (option)

You can adjust horizontal/vertical position, horizontal/vertical size as you prefer.

1. Repeatedly press the TV/AV button to select the RGB PC mode.
2. Press the MENU button and then ▲ / ▼ button to select the Special menu.
3. Press the ▶ button and then ▲ / ▼ button to select PC Setup.

Special Input Language Onlc lock File back Tilt Degree PC Setup To set

1. Press the ▶ button and then ▲ / ▼ button to select V-Position, V-Size, H-Position or H-Size on the PC Setup pull-down menu.
2. Press the ▶ button and then ◀ / ▶ button to make appropriate adjustments.

PC Setup V-Position U-Size H-Position H-Size 0 41 OF MENU

V-Position

This function is to adjust picture to up or down as you prefer.

V-Size

This function is to change the vertical screen size.

H-Position

This function is to adjust picture to left or right as you prefer.

H-Size

This function is to change the horizontal screen size.

1. Press the OK button to store it for the PC monitor picture.
2. Repeatedly press the MENU button to return to normal PC viewing.

PC in socket (option)

1. Connect the monitor output socket of the PERSONAL COMPUTER to the PC INPUT socket on the set.
2. Connect the audio cable from the PC to the AUDIO sockets on the set.
3. Press the TV/AV button to select RGB PC
4. Turn the PC on, and the PC picture appears on the screen. The set can be operated as the PC monitor.

Note : Set the resolution of PC to VGA 640x480 (60 Hz) video mode to use this set as PC monitor.

Connection of external equipment

You can connect additional equipment, such as VCRs, camcorders etc. to your set.

Here shown may be somewhat different from your set.

Aerial socket

1. Connect the RF out socket of the VCR to the aerial socket on the back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is stored.
5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to RF OUT sockets of the set.
2. If the VCR is connected to the AV sockets on the set, press the TV/AV button to select AV1, AV2 or AV3.
3. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.

You can also record programmes received by the TV on video tape via audio/video out sockets.

Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to the Euro scart socket of the set.
2. Press the PLAY button on the VCR.
   If your VCR outputs a switching voltage connect to Euro scart socket, the set will switch to AV4 mode automatically. But if you want to keep on watching TV mode, press the ▲ / ▼ or NUM-BER buttons.
   Otherwise press the TV/AV button on the remote control handset to select AV4. The VCR playback picture appears on the screen.
   You can also record programmes received by the TV on video tape.

VCR

VCR

VCR

VCR

VCR

Connection of external equipment

VCR

COMPONENT (DVD)

COMPONENT (DTV)

Second TV

VCR

S-Video/Audio in sockets (S-AV) (option)

When connecting an S-VIDEO VCR to the S-VIDEO socket, the picture quality will be further improved.

1. Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2. Connect the audio cable from the S-VIDEO VCR to the AUDIO sockets of the set.
3. Select AV3 by pressing the TV/AV button repeatedly.
4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.

Note : If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

Component in sockets

1. Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the COMPONENT1 to the COMPONENT INPUT sockets (Y P B P R ) on the set.
2. Connect the audio cable from the COMPONENT to AUDIO IN sockets of COMPONENT1.
3. Press the TV/AV button to select COMPONENT1.
4. Press the PLAY button on the COMPONENT. The COMPONENT playback picture appears on the screen.

DTV in sockets

1. Connect the HD-SET TOP inputs of the COMPONENT2 to the COMPONENT INPUT sockets (Y PB PR) on the set.
2. Connect audio inputs to Audio sockets of COMPONENT2.
3. Press the TV/AV button to select COMPONENT2.

Monitor out sockets

Connect the audio/video in sockets of the other TV or monitor to MONITOR OUT sockets of the set.

Audio out sockets (AUDIO OUT) (option)

The phono sockets for a Hi-Fi amplifier system are on the back of the set; L=left sound channel, R=right sound channel. If you connect an amplifier system, you can also play the TV sound through the stereo amplifier system.

Connection of external equipment

Headphone socket (option)

Insert the headphone plug to the headphone socket of the set. You can listen to the sound through the headphone and the TV's speakers. To adjust the headphone volume, press the ◀/▶ button on the 🔒 Volume pull-down menu. See the 'Sound adjustment' section.

Sound EEM Balance AVL CBG Super wofor Volume 50 Ω

Back panel with headphones connected to a wall-mounted device (no visible text or symbols)

If you press the MUTE button, only the sound from the TV's speakers are switched off.

When a programme is received in dual language, you can select a language (DUAL I, DUAL II or DUAL I+II) for the sound from the headphone regardless of that from the TV's speakers. On the Volume pull-down menu, press the I/II button to select the desired language; I, II or I II.

At this time if the set is in AV mode, the I/II button selects output sound; L R, L L or R R, in turn.

Troubleshooting check list

Symptoms

No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets (VCR only)

Simple diagram with a question mark, right-pointing arrow, and checkmark (no text or symbols)

Check these items and try to adjust these

The mains plug-(plugged in and switched on)

Is the TV switched on

Try another channel (weak signal)

Check aerial (plugged into TV?)

Check aerial (broken lead?)

Check aerial

Check for local interference

Adjust contrast

Adjust brightness

Adjust colour

Adjust volume

Check the batteries in remote control

Check Audio/Video sockets (VCR only)