S-2007WTQ - Air-conditioner LG - Free user manual and instructions

USER MANUAL S-2007WTQ LG

Please read this guide thoroughly before operating and keep it handy for reference at all times.

Table of contents

Introduction	Entry	3
	Important safety instruction	3
	Identification of parts	4
Installation	Where to install	5
	Door removal	6
	Door replacement	7
	Height adjustment	7
	when the freezer door does not align with the height of the refrigerator door	7
Operation	Starting	8
	Adjusting the temperatures and functions	8
	Refreshment center (Applicable to some models only)	10
	Wine holder	11
	Ice making	11
	Deodorizer(Applicable to some models only)	11
	Egg box	12
	Humidity control in the vegetable compartment	12
	Convert into a vegetable or meat compartment	12
	(Applicable to some models only)
Suggestion on food storage	Location of foods	13
	Storing foods	14
Care and maintenance	How to dismantle parts	15
	General information	16
	Cleaning	16
	Trouble shooting	17

Entry

The model and serial numbers are found on the inner case or back of refrigerator compartment of this unit. These numbers are unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Staple your receipt here.

Date of purchase

Dealer purchased from

Dealer address

Dealer phone no.

Model no.

Serial no.

Important safety instruction

This refrigerator must be properly installed and located in accordance with the installation instructions before it is used.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

When moving your appliance away from the wall, be careful not to roll over or damage the power cord.

After your refrigerator is in operation, do not touch the cold surfaces in the freezer compartment, particularly when hands are damp or wet. Skin may adhere to these extremely cold surfaces.

Unplug the power cord from the power plug for cleaning or other cares. Never touch it with wet hands because you can get an electric shock or be hurt.

Never damage, process, severely bend, pull out, or twist power cord because power cord damage may cause a fire or electric shock. You have doubts on whether the appliance is properly grounded.

Never place glass products in the freezer because they may be broken when their inner matters are frozen.

The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Never allow anyone to climb, sit, stand or hang on the refreshment center door. These actions may damage the refrigerator and even tip it over, causing severe personal injury.

Don't use an extension cord

Accessibility of Supply Plug

Supply Cord Replacement

Warning

If possible, connect the refrigerator to its own individual electrical outlet to prevent it and other appliances or household lights from causing an overload that could cause a power outage.

The refrigerator-freezer should be so positioned that the supply plug is accessible for quick disconnection when accident happens.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Do not modify or extend the Power Cord length.

- It will cause electric shock or fire.

Child entrapment warning

DANGER: Risk of child entrapment.

Before you throw away your old refrigerator or freezer:

Take off the doors

Leave the shelves in place so that children may not easily climb inside.

The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Don't store

Don't store or use gasoline or other flammable vapor and liquids in the vicinity of this or any other appliance.

Grounding (Earthing)

In the event of an electric short circuit, grounding (earthing) reduces the risk of electric shock by providing an escape wire for the electric current.

In order to prevent possible electric shock, this appliance must be grounded improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded.

Identification of parts

Freezer compartment Refrigerator compartment Milk product corner Lamp Shelf Wine holder Door rack(1 piece or 2 pieces) Shelf Snack corner Refreshment center (Optional) Egg box Door rack(1 piece or 2 pieces) Shelf (Folding or Normal) Door rack Vegetable drawer Humidity switch Convert into a vegetable or meat compartment Lower cover

NOTE

- If you find some parts missing from your unit, they may be parts only used in other models.

Select a good location

Where to install

1. Place your appliance where it is easy to use.
2. Avoid placing the unit near heat sources, direct sunlight or moisture.
3. To ensure proper air circulation around the fridge -freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall.

Keep it at a proper distance More than 5 cm to back

Disposal of the old appliance

1. To avoid vibrations, the appliance must be leveled.
2. Don't install the appliance below 5^ C . It may cause affect the performance.

This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable.

All the important materials should be sent to the collection center of waste material and can be reused after rework (recycling). For take back, please contact with the local agency.

Warning

Door removal

Electric Shock Hazard

Disconnect electrical supply to refrigerator before installing.

Failure to do so could result in death or serious injury.

Remove lower cover

If your access door is too narrow for the refrigerator remove the refrigerator door and pass the refrigerator laterally.

Remove the lower cover by lifting upward.

Lower cover Hinge cover Upperhinge Keeper Upper hinge

Remove the freezer compartment door

1) Loosen the hinge cover screws and remove the cover.
2) Remove the keeper by rotating it to counter clockwise (①) and then lifting the upper hinge up(②).

NOTE

- When removing the upper hinge, be careful that the door does not fall forwards.

Remove the refrigerator door

3) Remove the freezer compartment door by lifting it upward.

1) Loosen the hinge cover screws and remove the cover. Remove connection wire, if any, except for the earth line.

2) Remove keeper by rotating it clockwise (①) and then remove the upper hinge by lifting it up (②).

3) Remove the refrigerator compartment door by lifting it up.

Pass the refrigerator

Pass the refrigerator laterally through access door as shown in the right figure.

Lowerhinge

connection wires

Illustration of a hand using a tool to adjust or install a mechanical component, with an inset showing the assembly process (no text or symbols present)

Upperhinge Keeper ① ②

Illustration of a person standing beside an open refrigerator with a door, no text or symbols visible

If the height of freezer compartment door is different from the height of Refrigerator compartment door

After leveling the door height Next

Door replacement

Mount them in the reverse sequence of removal after they pass through the access door.

Height adjustment

If the freezer compartment door is lower than the refrigerator compartment door

Level the door by inserting flat(-type) driver into the groove of the left height adjusting screw and rotate it clockwise(①).

If the freezer compartment door is higher than the refrigerator compartment door

Level the door by inserting flat(-type) driver into the groove of the right height adjusting screw and rotate it clockwise(①).

Height difference Height difference Left height adjustment screw

Height difference Height difference Right height adjustment screw

When the freezer door does not align with the height of the refrigerator door

Even if the height can not be aligned by using the height adjustment screw, insert the transparent sheet supplied with the product.

• Separate the door with the lower height, use the (+) type screwdriver to unscrew the screw at the bottom hinge as shown at Figure ①, insert the transparent sheet between the bottom hinge and the bottom bracket, and then fix it with the screw as shown at Figure ②.
• Insert more transparent sheets enough to align the height. (4 sheets and supplied in total.)

Bottom hinge Transparent sheet Bottom bracket

The refrigerator doors will close smoothly by heightening the front side by adjusting the height adjusting screw. If the doors do not close correctly, performance maybe

1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet.

Starting

When your refrigerator is first installed, allow it to stabilize at normal operating temperatures for 2-3 hours prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before restarting.

Adjusting the temperatures and functions

Refreshment Center Button Refreshment Center

Optional	Function display board
Type-1
Type-2

NOTE

- Your model may not include every option.

How to adjust the temperature in the freezer compartment

How to adjust the temperature in the refrigerator compartment

Express freezer (Applicable to some models only)

Lock (Applicable to some models only)

Door open alarm

Self-diagnosis (fault detection) function

Display Power Saving Mode

This function places the display into power saving mode until the next time the door is opened.

Press the FREEZER and EXPRESS FRZ. buttons simultaneously and hold them for 5 seconds until the Ding sounds. All LED/LCDs will then turn ON, then OFF. When the power saving mode is activated, the display will remain off until the next time the door is opened. Then, it will come on whenever a door is opened or a button is pressed and remain on for 20 seconds after the last door opening or button selection. To deactivate the power saving mode, press the FREEZER and EXPRESS FRZ. buttons simultaneously and hold them for 5 seconds until the Ding sounds.

You can adjust temperature of and freezer room and refrigerator room.

Optional Type-1 Type-2 FRZ.TEMP. - - - MAX MIN Middle(-19°C)→Middle strong(-22°C)→Strong(-23°C)→Weak(-15°C)→Middle weak(-17°C) Optional Type-1 Type-2 REF.TEMP. - - - MAX MIN Middle(3°C)→Middle strong(2°C)→Strong(0°C)→Weak(6°C)→Middle weak(4°C)

* Whenever pressing button, setting is repeated in the order of (Middle) → (Middle Strong) → (Strong) → (Weak) → (Middle Weak).

- The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within refrigerator.

- Refrigeration function is weak in the initial time. Please adjust temperature as above after using refrigerator for minimum 2\~3 days.

Please select this function for promptfreezer.

- off → on → off is repeated whenever pressing EXPRESS FZ. button.

- The arrow mark graphic remains at the "on" when selecting Special Refrigeration "on".

- Prompt freezer function automatically turns off after a fixed time passes.

This button stops operation of different button.

- Locking or Release is repeated whenever the CHILD LOCK is pressed more than 3 seconds.

- If you use the CHILD LOCK button, none of the other buttons will work until you unlock them.

An alarm will sound 3 times when the refrigerator door is left open for more than 1 minute. This alarm will be rung at an intervals of 30 sec. and stop at the close of the door. If the alarm sound does not stop even after the freezer and refrigerator compartment doors are closed, contact the service center.

Self-diagnosis function operates when a problem occurs in the unit. When an erroro occurs in the unit. Immediately contact the service center without turning the power OFF. If the power is OFF, it will take the engineer longer to find out where the fault occurs.

The pressing of any function buttons will not alter the temperature setting when a fault occurs.

Refreshment center(Applicable to some models only)

How to use

Use the refreshment center door as a stand

Never take out the inner refreshment center cove

Never place heavy items on the refreshment center door or allow children to hang it on.

Open the refreshment center door.

• You can access the refreshment center without opening refrigerator door and thus saving electricity.

• Inner lamp is lit in refrigerator compartment when the refreshment center door opens. Thus it is easy to identify the contents.

• Never use the refreshment center door as a chopping board and take care not to damage it with sharp tools.
  ■ Never rest your arms or severely press on it.

- The refreshment center can not function normally without the cover.

■ Not only can the refreshment center door may be damaged, but also children may be hurt.

Illustration of a hand inserting a tray into an oven (no text or symbols)

Illustration of a double-door refrigerator with glassware and a bottle on the tray (no text or symbols)

Illustration of hands installing or adjusting a door panel with arrows indicating motion (no text or symbols)

Illustration of a child sitting on the floor next to an open refrigerator with a cross symbol (no text or symbols present)

Wine holder adjustment

Wine holder

Bottles can be stored laterally with this wine corner. This can be attached to any shelf.

In case of inserting the wine holder :

Pull the wine holder downward as in ② after inserting it into the side anchoring part of the shelf as in ① by catching it upward as in ①.

In case of separating the wine holder :

Pull the wine holder inward as in ④ after holding it upward as in ③ by catching it.

When making Ice

Ice Making

• Fill water in ice making box of the ice making corner. If water is fully filled the ice will not be separated well and water can be dropped to make ice lumped.
• Ice will be dropped into the ice storage bin by rotating ice separation handle of ice making compartment.

Diagram of a multi-tiered appliance with internal components and an arrow indicating rotation (no text or symbols)

Diagram showing two steps of a kitchen appliance with labeled parts and directional arrows indicating movement.

Ice Making Box

Illustration of a kitchen appliance with three circular gauges and a hand adjusting the lid (no text or symbols)

NOTE

- Rotating the ice separation handle before ice is fully frozen may cause the remaining water drop into the ice storage bin to lump the ice together.

Deodorizer

(Applicable to some models only)

This system efficiently absorbs strong odors by using the optical catalyst. This system does hot have any affect on stored food.

Deodorizing system Vegetable compartment Conversion corner

How to use the deodorizing system

■ Since it is installed already installed onto the cool air intake duct from the from the refrigerator compartment, you need no separate installation.
- Please use closed containers to store food with pungent odors. Otherwise, this oder can be absorbed by other food in the compartment.

Egg box

You can move the egg box to wherever you want.

Line drawing of a rectangular container filled with eggs (no text or symbols)

NOTE

• Never use the egg box as an ice storage bin. It can be broken.
• Never store the egg box in the freezer compartment or fresh compartment.

Humidity control in the vegetable compartment

The humidity can be controlled by adjusting the humidity control switch to the left/right when storing vegetables or fruits.

High humidity

HUMIDITY CONTROL HIGH LOW .... | ......

Diagram showing a device with labeled ports and a magnified inset highlighting the port's internal structure.

Low humidity

HUMIDITY CONTROL HIGH LOW...↓......

Convert into a vegetable or meat compartment (Applicable to some models only)

- The bottom drawer in the refrigerator can be converted into a vegetable or meat compartment

MEAT……VEGE. Vegetable compartment MEAT……VEGE. Meat compartment Conversion switch Be sure to check the conversion switch before storing foods

The meat compartment maintains the temperature at a lower point than the refrigerator compartment so that meat or fish can be stored fresh longer.

NOTE

• Never use the egg box as an ice storage bin. It can be broken.
• Never store the egg box in the freezer compartment or fresh compartment.

Location of foods

(Refertoidentificationofparts)

Wine holder

Snack drawer

Freezer compartment shelf

Freezer compartment door rack

Freezer compartment drawer

Milk product corner

Egg box

Refreshment center

Refrigerator compartment shelf

Refrigerator compartment door rack

Vegetable drawer

Vegetable drawer /meatdrawer conversion corner

Storewine.

Storesmallfoodssuchasbread,snacks,etc..

Storevariousfrozenfoodssuchasmeat,fish,icecream,frozensnacks,etc..

■ Storesmallpackedfrozenfood.
■ Temperatureislikelytoincreaseasdoor opens. So,donotstorelong-termfood suchicecream,etc..

■ Storemeat,fish,chicken,etc..after wrappingthemwiththinfoil.
■ Storedry.

Storemilkproductssuchasbutter,cheese, etc..

Placethiseggboxintheproperlocation.

Storefoodsoffrequentusesuchasbeverage, etc..

Storesidedishesorotherfoodsataproper distance.

Storesmallpackedfoodorbeveragessuch asmilk,juice,beer,etc..

Storevegetablesorfruits.

Storevegetable, fruits, meattothaw, raw fish, etc.. settingtheconversionswitchas necessary.

Besuretochecktheconversionswitch settingbeforestoringfoods.

Illustration of various food and food items arranged vertically, including bread, fish, snacks, and vegetables (no text or labels)

Storing foods

• Storefreshfoodintherefrigeratorcompartment. How foodisfrozenandthaw edisan importantfactorinmaintainingitsfreshnessandflavor.
• Donotstorefoodwhichgoesbadeasilyatlow temperatures,suchasbananas,and melons.
• Allow hot food to cool prioritostoring, placing hot food in there refrigerator could spoil other food, and lead to higher electric bills.
• Whenstoringthefood,coveritwithvinylwraporstoreinacontainerwithalid.This preventsmoisturefromevaporating,andhelpsfoodtokeeppitstasteandnutrients.
• Donotblockairventswithfood.Smoothcirculationofchilledairkeepsrefrigerator temperatureseven.
• Donotopenthedoorfrequently.Openingthedoorletswarmairentertherefrigerator, andcausetemperaturestorise.
• Neverkeeptoomanyfoodsindoorrackbecausetheymaybeinterruptedbyinner rackssothatthedoorcannotbefullyclosed.

Freezer compartment

• Donotstorebottlesinthefreezercompartment-theymaybreakwhenfrozen.
  ■ Donotrefreezefoodthathasbeenthawed. Thiscauseslossoftasteandnutrient.
• Whenstoringfrozenfoodlikeicecreamforalongperiod,placeitonthefreezer shelf,notinthedoorrack.
• Donottouchthecoldfoodsorcontainers-especiallymadeofmetallic-,withwethandsandplaceglassproductsinthefreezercompartment.

-That's w hyyoumayhavechilblainsandthey may be broken when their inner matters are frozen, causing personal injury.

Refrigerator compartment

• Avoidplacingmoistfoodupmostrefrigeratorshelves, itcouldfreezeupondirect contactwithchilledair.
• Alwayscleanfoodpriortorefrigeration. Vegetablesandfruitsshouldbewashedand wiped, andpackedfoodshouldbewiped, topreventadjacentfoodfromspoiling.
• Whenstoringeggsintheirstoragerackorbox,ensurethattheyarefresh,andalways storetheminaup-rightposition,whichkeepsthemfreshlonger.

NOTE

- If you keep there refrigerator in a hot and humid place, frequent opening of the door or storing a lot of vegetables in it may cause dew to form which has no effect on its performance. Removethedew with dust cloth free from care.

How to dismantle parts

NOTE

- Dismantling is done in the reverse sequence of assembly. Be sure to unplug the power plug before dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged.

Freezer compartment lamp

Freezer compartment shelf

Door rack and support

Lamp in refrigerator compartment

Refreshment center

Vegetable compartment cover

Separate the lamp by pulling it o@twhile slightly pressing① and rotating② the lamp cover. Turn the bulb counterclockwise. Use a 40-watt bulb (max.) which can be purchased at a service center.

To remove a shelf, push the shelf to the left, lift the left part of the shelf a bit, lift the right part up③, and take it out.

Lift the door rack to① directionholding both sides and pull it out to direction.

Insert the tool into the marked area (①) and push the tool to disconnect. Use the tool with the flat tip such as (-) screw driver. Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and can be purchased at a service center.

• Separate the bin (i) to upward.
• Separate the upper rack of the refreshment center and then pull out the refreshment center cover(②).
  ■ The refreshment center can be removed by pulling it upwards.

Illustration of a hand using a tool to adjust or install a fan panel (no text or symbols visible)

Diagram showing hand positioning of a device with numbered components, likely illustrating a step in a container or sink.

NOTE

- Be sure to remove parts from the refrigerator door when removing the vegetable compartment and snack corner.

- To remove the vegetable compartment cover, pull out the vegetable compartment a bit to the front①lift the front part of the vegetable compartment cover as shown by②, and take it out.

Diagram showing two labeled steps of a device or folder with arrows indicating direction, likely illustrating a process or assembly.

General information

Vacation time

During average length vacations, you will probably find it best to leave the refrigerator in operation. Place freezable items in freezer for longer life.

When you plan not to operate, remove all food, disconnect the power cord, clean the interior thoroughly, and leave each door OPEN to prevent odor formation.

Power failure

Most power failures that are corrected in an hour or two will not affect your refrigerator temperatures.

However, you should minimize the number of door openings while the power is off.

If you move

Remove or securely fasten down all loose items inside the refrigerator.

To avoid damaging the height adjusting screws, turn them all the way into the base.

Anti condensation pipe

The outside wall of the refrigerator cabinet may sometimes get warm, especially just after installation.

Don't be alarmed. This is due to the anti-condensation pipe, which pumps hot refrigerator to prevent "sweating" on the outer cabinet wall.

Cleaning

It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled food should be wiped up immediately, since it may acidify and stain plastic surfaces if allowed to settle.

Exterior

Use a lukewarm solution of mild soap or detergent to clean the durable finish of your refrigerator.

Wipe with a clean damp cloth and then dry.

Interior

Regular cleaning is recommended. Wash all compartments a baking soda solution or a mild detergent and warm water. Rinse and dry.

After cleaning

Please verify that the power cord is not damaged, power plug is not overheated, or power plug is well inserted into the power consent.

Warning

Always remove power cord from the wall outlet prior to cleaning in the vicinity of electrical parts (lamps, switches, controls, etc.).

Wipe up excess moisture with a sponge or cloth to prevent water or liquid from getting into any electrical part and causing an electric shock.

Never use metallic scouring pads, brushes, coarse abrasive cleaners, strong alkaline solutions, flammable or toxic cleaning liquids on any surface.

Do not touch frozen surfaces with wet or damp hands, because damp object will stick or adhere to extremely cold surfaces.

Trouble shooting

Beforecallingforservice, review thislist. It maysaveyoubothtimeandexpense. Thislist includescommonoccurrencesthatarenottheresultofdefective workmanshipormaterialsinthisappliance.

Occurrence	Possible cause	Solution
Running of refrigerator
Refrigerator compressor does not run.	Refrigeratorcontrolisoff.	Setrefrigeratorcontrol.Seesettingthe controls.
	Refrigeratorisindefrostcycle.	Thisisnormalforafullyautomatic defrostingrefrigerator.Thedefrost cycleoccursperiodically.
	Plug at wall outlet is disconnected.	Makesureplugistightlypushedinto outlet.
	Poweroutage.Checkhouselights.	Calllocalelectriccompany.
Refrigerator runs too much or too long	Refrigerator is larger than the previous oneyouowned.	Thisisnormal.Larger,moreefficient units run longer in these conditions.
	Roomoroutsideweatherishot.	Itisnormalfortherefrigeratortowork longerundertheseconditions.
	Refrigerator has recently been disconnectedforaperiodoftime.	Ittakessomehoursfortherefrigerator tocooldowncompletely.
	Largeamountsofwarmorhotfood mayhavebeenstoredrecently.	Warmfoodwillcausetherefrigeratorto runlongeruntilthedesiredtemperature isreached.
	Doorsareopenedtoofrequentlyortoo long.	Warmairenteringtherefrigerator causesittorunlonger.Openthedoor lessoften.
	Refrigerator or freezer door may be slightlyopen.	Makesuretherefrigeratorislevel. Keepfoodandcontainersfrom blockingdoor.Seeproblemsection. OPENING/CLOSING of doors.
	Refrigeratorcontrolissettoocold.	Set the refrigerator control to a warmersettinguntiltherefrigerator temperatureissatisfactory.
	Refrigerator or freezer gasket is dirty, worn,cracked,orpoorlyfitted.	Cleanorchangegasket.Leaksinthe doorsealwillcauserefrigeratortorun longerinordertomaintaindesired temperatures.
	Thermostatiskeepingtherefrigeratorat aconstanttemperature.	Thisisnormal.Refrigeratorgoeson and offtokeepthetemperatureconstant.
Temperatures are too cold
Temperature in the freezer is too cold and the refrigerator temperature is satisfactory.	Freezer control is set too cold	Set the freezer control to a warmer setting until the freezer temperature is satisfactory.
Temperature in the refrigerator is too cold and the freezer temperature is satisfactory.	Refrigerator control is set too cold.	Set the refrigerator control to a warmer setting
Food stored in drawers freezes.	Refrigerator control is set too cold.	See above solution.
Meat stored in fresh meat drawer freezes.	Meat should be stored at temperature just below the freezing point of water (32°F, 0°C) for maximum fresh storage time.	It is normal for ice crystals to form due to the moisture content of meat.
Temperatures are too warm
Temperatures in the freezer is too warm.	Freezer control is set too warm.	Set the freezer control to a colder setting until the freezer temperature is satisfactory.
	Refrigerator control is set too warm. Refrigerator control has some effect on freezer temperature.	Set the freezer control to a colder setting until the freezer temperature is satisfactory.
Temperatures in the refrigerator or freezer is too warm.	Doors are opened too frequently or too long.	Warm air enters the refrigerator/ freezer whenever the door is opened. Open the door less often.
	Door is open slightly.	Close the door completely.
	Large amounts of warm of hot food may have been stored recently.	Wait until the refrigerator or freezer has had a chance to reach its selected temperature.
	Refrigerator has recently been disconnected for a period of time.	A refrigerator requires some hours to cool down completely.
Temperature in the refrigerator is too warm and the freezer temperature is satisfactory.	Refrigerator control is set too warm.	Set the refrigerator control to a colder setting.
Sound and noise
Louder sound levels when refrigerator is on.	Today'srefrigeratorshaveincreased storagecapacityandmaintainmore eventemperatures.	Itisnormalforsoundlevelstobehigher.
Louder sound levels when compressor comes on.	Refrigeratoroperatesathigherpressures duringthestartoftheONcycle.	Thisisnormal.Soundwillleveloffas refrigeratorcontinuestorun.
Vibrating or rattling noise.	Floorisunevenorweak. Refrigeratorrocksonthefloorwhenitis movedslightly.	Besurefloorislevelandsolidandcan adequatelysupportrefrigerator.
	Itemsplacedonthetopofrefrigerator arevibrating.	Removeitems.
	Dishesarevibratingontheshelvesin therefrigerator.	Itisnormalfordishestovibrateslightly.Movedishesslightly.Makesurerefrigeratorislevelandsolidly setonfloor.
	Refrigeratoristouchingwallorcabinets.	Relieveormoverrefrigerator
Water/Moisture /Ice inside refrigerator
Moisture collects on inside of refrigerator walls.	Weatherishotandhumidwhich increasesrateoffrostbuildupand internalsw eating.	Thisisnormal.
	Doorisslightlyopen.	Seeproblemsectionopening/closingof doors.
	Doorisopenedtoooftenortoolong.	Openthedoorlessoften.
Water/Moisture /Ice outside refrigerator
Moisture forms on outside of refrigerator or between doors.	Weatherishumid.	Thisisnormalinhumidweather.Whenhumidityislower,themoisture shoulddisappear.
	Doorisslightlyopen,causingcoldair fromtheinsidetherfrigeratortomeet warmairfromtheoutside.	Thistime,closethedoorcompletely.
Odors in refrigerator
	Interior needs to be cleaned.	Clean interior with sponge, warm water and baking soda.
	Food with strong odor is in refrigerator.	Cover food completely.
	Some containers and wrapping paper produce odors.	Use a different container or brand of wrapping paper.
Opening/Closing of doors/Drawers
Door(s) will not close.	Food package is keeping door open.	Move packages that keep door from closing.
Door(s) will not close. (Continued)	Door was closed too hard, causing other door to open slightly.	Close both doors gently.
	Refrigerator is not level. It rocks on the floor when it is moved slightly.	Adjust the height adjusting screw.
	Floor is uneven or weak. Refrigerator rocks on the floor when it is moved slightly.	Be sure floor is level and can adequately support refrigerator. Contact carpenter to correct sagging or sloping floor.
	Refrigerator is touching wall or cabinets.	Relieve or move refrigerator.
Drawers are difficult to move.	Food is touching shelf on top of drawer	Keep less food in drawer.
	Track that drawer slides on is dirty.	Clean drawer and track.
Other	Please thoroughly read this manual.

LG

الثلاثaje SXS

دليل الإستخدم

Abstract geometric design with a large circular shape and a white L-shaped cutout, no text or symbols present.

P/NO : MFL30138160

المحتويات

③ مدخل

Illustration of a person standing beside an open refrigerator in a tiled room (no text or symbols visible)

Eraser Presiding the clearance of the ozone Imaging the environment

Illustration of a hand opening a rectangular appliance with a lid, showing internal components and a door (no text or symbols)

Isometric line drawing of a double-door refrigerator with glassware and a bottle on the tray (no text or symbols)

Illustration of hands installing or adjusting a door panel (no text or symbols visible)

Illustration of a child reaching toward a window with a cross mark, no text or symbols present

Diagram of a multi-tiered kitchen appliance with a curved arrow indicating rotation (no text or symbols)

حامل القوارير

Diagram showing a device with labeled parts and directional arrows, likely illustrating a process or assembly.

Diagram of a kitchen appliance with numbered parts and directional arrows indicating assembly or inspection steps

Illustration of a kitchen appliance with three circular gauges and a hand adjusting the top panel (no text or symbols)

Pure technical line drawing of a 3D rectangular block with dashed internal lines and no text or symbols

Diagram showing a close-up of a device's internal structure with a magnified inset (no text or symbols)

الرطوبة المنخفضة

Illustration of various food and food items including bread, fish, milk, cheese, eggs, bottles, dairy, fruits, vegetables, meat, and seafood (no text or labels)

موافق الأطعمة

(راجع تعريف الجزاء)

Illustration of a car with a hand holding a tool, showing airflow or exhaust (no text or symbols)

Diagram showing hand positioning of a device with labeled parts and directional arrows indicating movement or positioning.

Diagram showing two hands operating a device with labeled arrows and symbols (Y, I)