95-8734B - Kit voiture Metra - Free user manual and instructions

USER MANUAL 95-8734B Metra

Interior view of a car dashboard with touchscreen and control panels (no visible text or symbols)

Mercedes-Benz S Class 2000-2006

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications

KIT FEATURES

• ISO DDIN radio provision
• 95-8734B is scratch resistant matte black
- 95-8734W is woodgrain

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Panel brackets • D) #6 x 3/8" Phillips screws (2) • E) Panel clips (2)

AB

Line drawing of a rectangular frame with three recessed cutouts (no text or symbols)

• 

Two technical line drawings of mechanical components or brackets, no text or symbols present

• 

• 

• 

TABLE OF CONTENTS

Dash Disassembly 2

Kit Preparation ....3

Kit Assembly 3

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: Visit metraonline.com for harness and interface information

Antenna Adapter: 40-VW12 or 40-EU10

TOOLS REQUIRED

• Panel removal tool
• Phillips screwdriver
• Torx T20 screwdriver

Attention! Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition.

DASH DISASSEMBLY

2000-2002

1. Open the ashtray compartment door, remove (2) Torx T20 screws securing the ashtray assembly, then remove and unplug the ashtray assembly. (Figure A)
2. Unclip, unplug, and remove the climate control panel surrounding the radio, then remove the panel. (Figure B)
3. Remove (4) Torx T20 screws securing the radio, then unplug and remove the radio. (Figure C)

Technical line drawing of a mechanical component with a circular feature and arrow indicator (no text or symbols)

Interior view of a car dashboard with control panel and directional arrow (no text or symbols)

Diagram of a vehicle interior showing a central control panel with arrows pointing to the components (no text or symbols present)

2003-2006

1. Open the ashtray compartment door, remove (2) Torx T20 screws securing the ashtray assembly, then remove and unplug the ashtray assembly. (Figure A)
2. Unclip, unplug, and remove the climate control panel, then remove the panel. (Figure B)
3. Unclip and remove the trim panel above the radio. (Figure B)
4. Remove (4) Torx T20 screws securing the radio, then unplug and remove the radio. (Figure C)

Continue to Kit Preparation

Technical line drawing of a mechanical component with no visible text or symbols

(Figure A)(Figure A)

Interior view of a car dashboard with control panel and directional arrows (no text or symbols)

(Figure B)(Figure B)

Diagram of a device rear panel with arrows indicating orientation, no text or symbols present

(Figure C)(Figure C)

KIT PREPARATION KIT ASSEMB

1. Attach the panel brackets to the radio trim panel with the two supplied #6 x 3/8" Phillips screws. (Figure A)
2. Secure the climate control to the radio trim panel with the factory screws. (Figure B)

Continue to Kit Assembly

Technical line drawing of a door frame with two small objects and dashed alignment lines (no text or symbols)

(Figure A) (Figure A)

Technical line drawing of a vehicle door panel with internal components and alignment markers (no text or symbols)

(Figure B) (Figure B)

1. Attach the (2) supplied panel clips to the radio housing. (Figure A)
2. Attach the radio brackets to the radio using screws supplied with the radio, and then secure into the dash opening. (Figure B)
3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
4. Snap the radio trim panel over the radio and reassemble the dash in reverse order of disassembly.

Technical line drawing of a car dashboard frame with control panel and buttons (no text or symbols)

Technical line drawing of an electronic device casing with mounting holes and internal components (no text or symbols)

Having difficulties? We're here to help.

our Tech Support line at:

386-257-1187

mail at:

[e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills b enselling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

600-354-8782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians