Metra

95-7393B - Kit voiture Metra - Free user manual and instructions

Find the device manual for free 95-7393B Metra in PDF.

📄 5 pages English EN ⬇ Download 💬 AI Question
Notice Metra 95-7393B - page 1
1 / 5
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about 95-7393B Metra

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Kit voiture in PDF format for free! Find your manual 95-7393B - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 95-7393B by Metra.

USER MANUAL 95-7393B Metra

natural_image Interior view of a car dashboard with air vent, grille, and control panel (no visible text or symbols)

Hyundai Accent 2018 up\*

*Visit NetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications

KIT FEATURES

  • ISO DDIN radio provision
  • Painted matte black

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets

Metra 95-7393B - KIT COMPONENTS - 1

natural_image Technical line drawing of a car front panel (no text or symbols)

Metra 95-7393B - KIT COMPONENTS - 2

natural_image Technical line drawing of two mechanical bracket components (no text or symbols)

TABLE OF CONTENTS

Dash Disassembly 2
Kit Preparation 2
Kit Assembly 3

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring harness: Please visit metraonline.com for wiring harness options

Antenna adapter: 40-KI11

TOOLS REQUIRED

- Panel removal tool • Phillips screwdriver

Attention! Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition.

DASH DISASSEMBLY KIT PREPA

  1. Unclip and remove the a/c vent trim panel surrounding the radio. (Figure A)
  2. Remove (4) Phillips screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure B)

Continue to Kit Preparation

Metra 95-7393B - DASH DISASSEMBLY KIT PREPA - 1

natural_image Interior view of a car dashboard with control panel and directional arrows (no text or symbols)

(Figure A) (Figure A)

Metra 95-7393B - DASH DISASSEMBLY KIT PREPA - 2

natural_image Top-down diagram of a car dashboard showing front panel, rear seats, and control buttons (no text or symbols)

(Figure B) (Figure B)

TION

From the factory a/c vent trim panel:

  1. Unclip and remove the a/c vents.
  2. Remove just (4) panel clips. (Figure A)

To the 95-7393B radio trim panel:

  1. Clip in the factory a/c vents. (Figure B)
  2. Attach the factory (4) panel clips. (Figure B)

Continue to Kit Assembly

Metra 95-7393B - To the 95-7393B radio trim panel: - 1

natural_image Technical line drawing of a car front panel with mounting holes and structural ribs (no text or symbols)

Metra 95-7393B - To the 95-7393B radio trim panel: - 2

natural_image Technical illustration of a car front panel with internal components and directional arrows (no text or symbols)

KIT ASSEMBLY

  1. Secure the radio brackets to the radio using the screws supplied with the radio. (Figure A)
  2. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation.
  3. Secure the radio assembly to the dash using the factory screws.
  4. Reassemble the dash in reverse order of disassembly using the 95-7393B radio trim panel to complete the installation.

Metra 95-7393B - KIT ASSEMBLY - 1

natural_image Technical line drawing of an electronic device casing with mounting holes and internal components (no text or symbols)

(Figure A)

If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 1-800-253-TECH, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support.

Metra 95-7393B - KIT ASSEMBLY - 2

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra 95-7393B - KIT ASSEMBLY - 3

Metra recommends MECP certified technicians

Metra 95-7393B - KIT ASSEMBLY - 4

natural_image Interior view of a car dashboard with air filters and control panels (no visible text or symbols)

Metra 95-7393B - KIT ASSEMBLY - 5

natural_image Exterior view of a car dashboard frame with three side panels showing internal compartments (no text or symbols)

Hyundai Accent 2018-up\*

*Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications.

Metra 95-7393B - Hyundai Accent 2018-up\* - 1

ISO DDIN radio provision

Metra 95-7393B - Hyundai Accent 2018-up\* - 2

Painted matte black

This kit provides the ability to install an ISO DDIN aftermarket radio. The radio trim panel is painted matte black.

KIT COMPONENTS

  • Radio trim panel
  • Radio brackets

WIRING & ANTENNA CONNECTIONS

(sold separately)

  • Wiring Harness: Please visit metraonline.com for wiring harness options
  • Antenna Adapter: 40-KI11

SALES 800-221-0932

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Metra

Model : 95-7393B

Category : Kit voiture