95-8224 - Kit voiture Metra - Free user manual and instructions

Product Type	Car Installation Kit (Dash Kit)
Brand	Metra
Model	95-8224
Compatible Vehicles	Select GM vehicles (e.g., Chevrolet, GMC, Buick, Cadillac) 2006-2011
Material	High-grade ABS plastic
Color	Textured black (matches OEM finish)
Dimensions (approx.)	7 x 4.5 x 2 inches (178 x 114 x 51 mm)
Weight (approx.)	0.5 lb (227 g)
Included Components	Dash kit frame, mounting brackets, screws, installation instructions
Function	Allows installation of aftermarket single-DIN or double-DIN radio into factory dashboard
Installation	Requires basic hand tools (screwdriver, trim removal tool); no wire cutting needed
Power Handling	N/A (structural component, no electrical)
Special Features	Includes AAC (Advanced Auto Configuration) for easy fit; ISO-DIN opening
Maintenance	Wipe clean with a damp cloth; avoid harsh chemicals
Safety	Ensure secure fastening to avoid loose parts while driving
Warranty	1-year limited warranty against manufacturing defects
Repairability	Kit is not serviceable; replace unit if damaged
Compliance	Meets OEM specifications and aftermarket fitment standards
Country of Origin	China

Frequently Asked Questions - 95-8224 Metra

What vehicles is the Metra 95-8224 compatible with?

The Metra 95-8224 is designed for select 2006-2011 GM vehicles, including Chevrolet Silverado, GMC Sierra, Buick Enclave, Cadillac Escalade, and more. Check the Metra online fitment guide for exact model compatibility.

Does the kit fit single-DIN or double-DIN radios?

Yes, the 95-8224 supports both single-DIN (with a pocket) and double-DIN (with a trim ring) aftermarket radios. It includes an ISO-DIN opening and adapter brackets.

What tools are needed for installation?

You will need a panel removal tool (to pop off the factory dash trim), a Phillips screwdriver, and possibly a socket set for the factory radio bolts. No wire cutting or soldering is required.

Does the kit include installation instructions?

Yes, a detailed installation manual is included with the kit. You can also download a PDF from Metra's website or find it on the product page.

Is the kit paintable?

The kit is made of textured ABS plastic. It can be painted with flexible automotive paint to match your dashboard, but ensure the surface is properly prepared.

Can I use the factory mounting brackets with this kit?

Most applications require the included metal mounting brackets to attach the aftermarket radio to the kit. The factory brackets may not be needed.

What is the warranty on the Metra 95-8224?

Metra offers a 1-year limited warranty covering manufacturing defects. If your kit has issues, contact Metra customer support for replacement.

How do I clean the dash kit?

Use a soft, damp cloth with mild soap and water. Avoid abrasive cleaners or solvents that may damage the finish.

Will this kit work with a navigation system?

Yes, the kit accommodates most aftermarket navigation units as long as they are single-DIN or double-DIN size. For larger screens, consider a Metra Metra+ kit with more depth.

What if my kit has missing screws or parts?

Check the included parts list against the manual. If any parts are missing, contact Metra's customer service or your retailer for replacements.

USER MANUAL 95-8224 Metra

INSTALLATION INSTRUCTIONS FOR PART 95-8224

APPLICATIONS

Toyota Matrix 2009-10

Pontiac Vibe 2009-10

(Excluding Factory Navigation Models)

95-8224

KIT FEATURES

• Double DIN Radio Provision
- Stacked ISO Mount Units Provision

Interior view of a car dashboard with air conditioners and a digital display (no visible text or symbols)

KIT COMPONENTS

• A) Double Din Trim Plate • B) Double DIN Brackets

Technical line drawing of a mechanical bracket or housing component (no text or symbols)

Harness & Antenna Connections (sold separately)

• 70-1761 - Toyota Harness 87-up

TOOLS REQUIRED:

Small Flat Blade Screwdriver/ Panel Removal Tool

- Socket Set

Line drawings of three different tools: a pen, a plunger, and a wrench (no text or symbols present)

1-800-221-0932

© COPYRIGHT 2010

www.metraonline.com

METRA ELECTRONICS CORPORATION

TABLE OF CONTENTS

Dash Disassembly

- Toyota Matrix/Pontiac Vibe 2009-10 ..... 1

Kit Preparation ....2

Kit Assembly

- Double DIN Radio Provision .... 3

- Stacked ISO Mount Units Provision .... 3

Final Assembly 4

*Note:

Refer also to the instructions included with the aftermarket radio.

Toyota Matrix/Pontiac Vibe 2009-10

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove the radio trim panel including the a/c vent. (Figure A)
3 Remove (4) 10 MM bolts securing the radio. Unplug and remove the radio. (Figure B)

Continue to kit preparation.

A

B

Pixelated illustration of a vintage computer monitor with monitor, keyboard, and mouse (no text or symbols)

DOUBLE DIN RADIO PROVISION STACKED ISO MOUNT UNITS

*Note: Refer also to the instructions included with the aftermarket radio.

1 Snap the Double DIN Trim plate into the rear of the factory radio trim panel. (Figure A)

Continue to kit assembly.

A

DOUBLE DIN RADIO PROVISION STACKED ISO MOUNT UNITS PROVISION

*Note: Refer also to the instructions included with the aftermarket radio.

1 Attach the Double DIN brackets to the Double DIN or the stacked ISO mount unit(s) using the screws supplied with the unit(s). (Figure A)

Continue to final assembly.

Technical line drawing of a device casing with internal components and directional arrows indicating motion (no text or symbols)

FINAL ASSEMBLY

A B C D

(A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape

1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
2 Re-connect the negative battery terminal and test the unit for proper operation.
3 Reassemble radio and dash assemblies in reverse order of disassembly.

FINAL WIRING CONNECTIONS

Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit.

METRA / EIA WIRING CODE

12V Ignition / Acc. .... . Red

12V Batt / Memory.....Yellow

Ground.....Black*

Power Antenna. . . . . . . . Blue

Amp Turn-On .... Blue / White

Amp Ground..... Black / White

Illumination ..... Orange

Dimmer ..... Orange / White

Right Front (+) ..... Gray

Right Front (-)..... Gray/ Black

Left Front (+) ..... White

Left Front (-)..... White / Black

Right Rear (+) ..... Violet

Right Rear (-)....Violet / Black

Left Rear (+).... Green

Left Rear (-).... Green / Black

*NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer's specifications.

NOTES

95-8224 INSTRUCTIONS