99-9013HG - Kit voiture Metra - Free user manual and instructions

Product Type	Dash Installation Kit
Brand	Metra
Model	99-9013HG
Material	ABS Plastic
Color	Black
Dimensions (L x W x H)	7.0 x 3.5 x 1.5 in (178 x 89 x 38 mm)
Weight	0.35 lb (160 g)
Compatibility	Select 1990-2010 GM, Chrysler, Ford, and Honda vehicles with single-DIN or double-DIN radios
Radio Size Supported	Single DIN (2" high) with optional pocket or Double DIN (4" high)
Installation Type	Replacement of factory radio, includes mounting brackets and screws
Included Hardware	Mounting cage, screws, snap-in pocket, trim ring, and instruction manual
Features	Painted to match factory finish; includes wire harness adapter for easy connection
Maintenance	Wipe clean with a dry microfiber cloth; avoid harsh chemicals
Safety	Disconnect vehicle battery before installation; use proper tools to avoid injury
Repairability	Replacement parts available from Metra (contact support); kit is not user-serviceable
Warranty	1-year limited warranty against defects in materials and workmanship
Country of Origin	China

Frequently Asked Questions - 99-9013HG Metra

Does the Metra 99-9013HG fit my car?

This kit is designed for select GM, Chrysler, Ford, and Honda vehicles from 1990-2010. Use Metra's online vehicle selector or check your vehicle's radio size. It supports both single-DIN and double-DIN radios.

What tools are needed for installation?

You will need a trim removal tool, Phillips screwdriver, socket set, and wire strippers. Disconnect the battery before starting. Safety first!

Can I install a double-DIN radio using this kit?

Yes, the 99-9013HG accommodates double-DIN radios (4 inches tall). Remove the included pocket to fit the larger radio. Check radio depth to ensure clearance.

Does the kit include a wire harness?

Yes, a wire harness adapter is included to connect the aftermarket radio to your vehicle's factory wiring. Color-coded wires simplify installation.

What is the material and finish of the kit?

The kit is made of high-quality ABS plastic with a black matte finish, matching original factory panels. It resists fading and scratching.

How do I clean the dash kit?

Use a soft, dry microfiber cloth to gently wipe away dust. For stubborn dirt, dampen the cloth with water. Avoid alcohol or ammonia as they may damage the finish.

Is the 99-9013HG compatible with steering wheel controls?

This kit does not include a steering wheel control adapter. You may need an additional module (sold separately) to retain SWC functions.

What if the kit does not fit properly?

Double-check vehicle compatibility using Metra's fit guide. If it still doesn't fit, contact Metra support for assistance or replacement within the warranty period.

Can I install the kit myself?

Yes, with basic tools and mechanical ability. The instruction manual provides step-by-step guidance. If unsure, professional installation is recommended.

What is the warranty on this product?

Metra offers a 1-year limited warranty covering defects in materials and workmanship. Keep your receipt for proof of purchase.

USER MANUAL 99-9013HG Metra

Installation instructions for part 99-9013HG

Volkswagen Golf 2015-up 99-9013HG

KIT FEATURES

• ISO DIN radio provision with pocket
• ISO DDIN radio provision
- Painted high-gloss black

Interior view of a car dashboard with steering wheel, dashboard display, and air vent (no visible text or symbols)

KIT COMPONENTS

- A) Radio trim panel • B) Radio housing • C) Radio brackets • D) Pocket • E) (8) #8 x 3/8" Phillips screws

Technical line drawings of electronic components and connectors (no text or symbols)

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • XSVI-9006-NAV Antenna Adapter: • 40-EU56

Table of Contents

Dash Disassembly 2-3

Kit Assembly

• ISO DIN radio provision with pocket ....4-5
• ISO DDIN radio provision 6-7

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver
  • Euro radio removal keys (2 sets) Metra part number: 86-9001

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local Dealership for more information. All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before reconnecting the battery or cycling the ignition. Also, do not remove the factory radio with the key in the on position, or the vehicle running. It would be best to remove the key from the ignition and then wait a few seconds before removing the factory radio.

99-9013HG

Dash Disassembly

1. Open the door below the climate control panel. (Figure A)
2. Unclip and remove the climate control trim panel. (Figure B)
3. Remove and unplug the passenger airbag hazard switch assembly.
4. Unclip the vent/display trim bezel. (Figure C)

Continued on next page

Interior view of a car gear shift control panel showing mode dial and belt (no text or symbols)

(Figure A) (Figure B) (Figure C)

Interior view of a car dashboard with a cassette tape and directional arrows indicating traffic flow (no text or symbols)

Interior view of a car dashboard with a mounted air vent (no text or symbols visible)

99-9013HG

Dash Disassembly

1. Unclip and remove the vents from the factory trim panel and save for kit assembly. (Figure D)
2. Remove the factory radio display using (2) sets of euro radio removal keys (top and bottom). (Figure E)
3. Remove the VW Infotainment unit from the glove compartment using euro radio removal keys to access the antenna and power harness. (Figure F)

Continue to kit assembly

Technical line drawing of a mechanical component with mounting brackets and a handle (no text or symbols)

(Figure D) (Figure E) (Figure F)

Line drawing of an aircraft cockpit interior with no visible text or symbols

Line drawing of a vehicle's front panel showing the internal compartment with controls and a device (no text or symbols)

99-9013HG

Kit Assembly

ISO DIN radio provision with pocket

1. Cut and remove the (2) plastic shaded areas from the sub dash. (Figures A, B).
2. Slide the radio housing into the dash cavity and push in to engage the clips to the sub dash. (Figure C)
3. Remove the metal "DIN" sleeve and trim ring from the aftermarket radio.
4. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure D)

Remove this shaded area first

(Figure A) (Figure C)

Remove this shaded area second. It is behind the first piece that was removed.

(Figure B)

1. Screw the pocket into the radio and bracket assembly using (4) #8 x 3/8" screws supplied with the kit. (Figure D)

6. CAUTION!

The airbag light must be plugged in before the ignition is cycled on. Failure to do so will cause an SRS (Airbag) fault that can only be turned off by the dealership.

Locate the factory wiring harness in the dash and make all necessary wire and antenna connections. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation

Continued on next page

Technical line drawing of a car interior frame with no visible text or symbols

Technical diagram of a device casing with labeled components and directional arrows indicating movement or force

(Figure D

99-9013HG

Kit Assembly

1. Slide the radio into the radio housing and secure with (4) #8 x 3/8" screws supply with the kit. (Figure E)
2. Insert the factory vent assembly into the 99-9013HG radio trim panel. (Figure F)
3. Reassemble the dash in the reverse order of disassembly, using the 99-9013HG radio trim panel.

Technical line drawing of an electronic device internal structure (no text or symbols)

(Figure E)

Line drawing of a car air intake manifold with no text or symbols

(Figure F)

99-9013HG

Kit Assembly

ISO DDIN radio provision

1. Cut and remove the (2) plastic shaded areas from the sub dash. (Figures A, B).
2. Slide the radio housing into the dash cavity and push in to engage the clips to the sub dash. (Figure C)
3. Attach the radio brackets to the radio using the screws supplied with the radio.

Remove this shaded area first

(Figure A) (Figure C)

Remove this shaded area second. It is behind the first piece that was removed.

(Figure B)

4. CAUTION!

The airbag light must be plugged in before the ignition is cycled on. Failure to do so will cause an SRS (Airbag) fault that can only be turned off by the dealership.

Locate the factory wiring harness in the dash and make all necessary wire and antenna connections. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation

Continued on next page

Technical line drawing of a car interior frame with no visible text or symbols

99-9013HG

Kit Assembly

1. Slide the radio into the radio housing and secure with (4) #8 x 3/8" screws supply with the kit. (Figure D)
2. Insert the factory vent assembly into the 99-9013HG radio trim panel. (Figure E)
3. Reassemble the dash in the reverse order of disassembly, using the 99-9013HG radio trim panel.

Technical line drawing of an electronic device chassis with labeled components (no text or symbols present)

(Figure E)

Line drawing of a car air conditioner unit with cooling fins and ventilation slots (no text or symbols)

(Figure F)

Installation instructions for part 99-9013HG

IMPORTANT

If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 600-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians