95-7313 - Kit voiture Metra - Free user manual and instructions

USER MANUAL 95-7313 Metra

INSTALLATION INSTRUCTIONS FOR PART 95-7313

APPLICATIONS

2001-2006 Hyundai Elantra

2003-2008 Hyundai Tiburon

2002-2005 Hyundai Sonata

2001-2006 Kia Optima (2006 Early Production Models Only)

95-7313

KIT FEATURES

• DDIN Head Unit Provision
• STACKED ISO DIN Head Unit Provision

KIT COMPONENTS

A) DDIN Trim Plate I B) DDIN Brackets

Interior view of a car dashboard with air conditioners and controls (no visible text or symbols)

A

Isometric line drawing of a rectangular mechanical component with side brackets (no text or symbols)

B

Three technical line drawings of bracket-like metal components with cutouts and holes (no text or symbols)

TOOLS REQUIRED:

Flat Blade Screwdriver I Phillips Screwdriver

1-800-221-0932

www.metraonline.com

© COPYRIGHT 2004-08 METRA ELECTRONICS CORPORATION

95-7313

Dash Disassembly 1-4

Kit Assembly 5-6

Final Assembly 7

95-7313

2001-2006 HYUNDAI ELANTRA

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove (2) Phillips screws from under the instrument cluster.
3 Remove ashtray then remove (2) Phillips screws in ashtray cavity.
4 Unclip and remove panel surrounding radio. (Figure A)
5 Remove (4) Phillips screws securing radio.

A

Technical line drawing of two views of a mechanical housing component (no text or symbols)

95-7313

2003-2008 HYUNDAI TIBURON

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove the radio trim panel starting with the bottom edge. (Figure A)
3 Remove (2) Phillips screws securing radio.

A

Line drawing of a device with front panel and control panel (no text or symbols)

2002-2005 HYUNDAI SONATA

2001-2005 KIA OPTIMA

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove entire panel surrounding radio. (Figure A)
3 Remove (4) Phillips screws securing radio.
4 The rear support bar in the sub dash will need to be cut and removed for aftermarket radio clearance. (Figure B)

Technical line drawing of a mechanical bracket or frame structure with no visible text or symbols

A

Technical line drawing of a car air intake manifold assembly (no text or symbols)

2006 KIA OPTIMA(2006 Early Production Models Only)

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove panel surrounding shifter. (Figure A)
3 Remove (2) Phillips screws at bottom of panel surrounding radio and climate control then unclip and remove entire panel. (Figure B,C)
4 Remove (4) Phillips screws securing radio. (Figure D)
5 The rear support bar in the sub dash will need to be cut and removed for aftermarket radio clearance. (Figure E)

A

Line drawing of a car interior showing the seatbelt and dashboard (no text or symbols)

B

Technical diagram of a mechanical component with arrows indicating assembly or force direction (no text or symbols)

C

Diagram of a device rear panel with labeled ports and control buttons (no readable text or symbols)

E

Technical diagram of a mechanical bracket assembly with an arrow indicating direction (no text or symbols present)

Interior view of a car air conditioning unit with control panel and directional arrows indicating movement (no text or symbols)

DOUBLE DIN HEAD UNIT PROVISION

1 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A)
2 Slide the DDIN radio unit into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure B)

A

Technical line drawing of a mechanical housing or enclosure with mounting brackets and internal cutouts (no text or symbols)

B

Diagram of a computer drive chassis with two arrows indicating directional movement (no text or symbols present)

C

CUT CUT

NOTE: For the 2003-2008 Hyundai Tiburon applications you will need to cut and remove the bottom mounting tabs on the DDIN brackets. (Figure C)

95-7313

STACKED ISO DIN HEAD UNIT PROVISION

1 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A)
2 Slide the stacked ISO DIN units into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure B)

A

Technical line drawing of a mechanical housing or enclosure component (no text or symbols)

B

Line drawing of a device chassis with multiple ports and connectors (no text or symbols)

C

CUT CUT

NOTE: For the 2003-2008 Hyundai Tiburon applications you will need to cut and remove the bottom mounting tabs on the DDIN brackets. (Figure C)

FINAL ASSEMBLY

1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recommends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
2 Re-connect the negative battery terminal and test the unit for proper operation.
3 Reassemble radio and dash assemblies in reverse order of disassembly.

FINAL WIRING CONNECTIONS

Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit.

A B C D

12V Ignition / Acc ... Red

12V Batt / Memory .. Yellow

Ground .... Black*

Power Antenna ..... Blue

Amp Turn-On ..... Blue / White

Amp Ground ..... Black / White

Illumination.....Orange

Dimmer ..... Orange / White

Right Front (+) ..... Gray

Right Front (-)..... Gray / Black

Left Front (+) ..... White

Left Front (-)..... White / Black

Right Rear (+)..... Violet

Right Rear (-) ..... Violet / Black

Left Rear (+).... Green

Left Rear (-) ..... Green / Black

*NOTE: When Black a wire is not present, ground radio to vehicle chassis.

All colors may not be present on all leads due to manufacturer's specifications.

NOTES

NOTES

95-7313 INSTRUCTIONS