99-8724B - Kit voiture Metra - Free user manual and instructions

USER MANUAL 99-8724B Metra

Interior view of a car dashboard with air conditioners and a digital display (no visible text or symbols)

Mercedes-Benz CLK-Class 2005-2009

KIT FEATURES

• ISO DIN radio provision with pocket
• ISO DDIN radio provision
- Painted matte black

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8" Phillips screws

A

Technical line drawing of a rectangular mechanical component with mounting holes (no text or symbols)

• 

Two isometric diagrams of rectangular blocks with internal holes, no text or symbols present

• 

Isometric line drawing of a rectangular electronic component with mounting holes (no text or symbols)

• 

TABLE OF CONTENTS

Dash Disassembly 2

Kit Assembly

-ISO DIN radio provision with pocket ....3

-ISO DDIN radio provision ....3

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: XSVI-9005-NAV

Antenna Adapter: 40-EU10

Steering Wheel Control Interface: ASWC-1

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver
- Socket wrench • T-20 Torx screwdriver

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

DASH DISASSEMBLY

1. Unclip the shifter trim panel, then unclip the shifter boot from the panel. Slide the shifter boot through the panel, then unplug and remove the panel. (Figure A)
2. Unclip the ashtray and set to the side. (Figure B)
3. Remove (2) T-20 Torx screws securing the bottom of the climate control panel, then unplug and remove the panel. (Figure C)

Mechanical assembly diagram showing a lever mechanism with a directional arrow (no text or symbols)

(Figure A)

Diagram of a car interior showing a vehicle seatbelt with directional arrows indicating motion (no text or symbols present)

(Figure B)

Technical line drawing of a vehicle wheel assembly with mounting brackets and guide rails (no text or symbols)

(Figure C)

1. Open the cup-holder, then unclip, unplug, and remove the hazard button panel. (Figure D)
2. Remove (4) T-20 Torx screws securing the radio, then unplug and remove the radio. (Figure E)

Continue to Kit Assembly

Diagram of a car air conditioning unit with airflow indicators and control panel

(Figure D)

Technical line drawing of a vehicle front panel with control buttons and ventilation grilles (no text or symbols)

(Figure E)

KIT ASSEMBLY

ISO DIN radio provision with pocket

1. Attach the radio brackets to the radio trim panel using (4) #8 x 3/8" Phillips screws supplied. (Figure A)
2. Attach the pocket to the bracket assembly using the (4) #8 x 3/8" Phillips screws. (Figure B)
3. Remove the metal DIN sleeve and trim ring from the aftermarket radio.
4. Slide the radio into the completed assembly, and then secure it using screws supplied with the radio. (Figure C)
5. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
6. Reassemble the dash in reverse order of disassembly.

Technical line drawing of a mechanical component with no visible text or symbols

(Figure A)

Technical line drawing of a car front panel with mounting brackets and side-mounted buttons (no text or symbols)

(Figure B)

Technical line drawing of a device casing with ventilation grilles and mounting points (no text or symbols)

(Figure C)

ISO DDIN radio provision

1. Attach the radio brackets to the radio trim panel using (4) #8 x 3/8" Phillips screws supplied. (Figure A)
2. Slide the radio into the completed assembly, and then secure it using screws supplied with the radio. (Figure B)
3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
4. Reassemble the dash in reverse order of disassembly.

Technical line drawing of a mechanical housing or enclosure with mounting holes and internal components (no text or symbols)

(Figure A)

Technical diagram of a device rear panel with labeled ports and directional arrows indicating movement or assembly.

(Figure B)

Meta®

99-8724B

INSTALLATION INSTRUCTIONS

IMPORTANT

If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by supplying in the most recognized and supported

mobile electronics school in our industry.

Log onto www.installennstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians