99-9401 - Kit d'installation auto Metra - Free user manual and instructions
Find the device manual for free 99-9401 Metra in PDF.
User questions about 99-9401 Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kit d'installation auto in PDF format for free! Find your manual 99-9401 - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 99-9401 by Metra.
USER MANUAL 99-9401 Metra
INSTALLATION INSTRUCTIONS FOR PART 99-9401
APPLICATIONS
2004-2006 Land Rover Freelander
99-9401
KIT FEATURES
• DIN Head Unit Provision With Removable Pocket
KIT COMPONENTS
A) Radio Housing
B) Pocket
natural_image
Interior view of a car dashboard with air filters and control panels (no visible text or symbols)A
natural_image
Technical line drawing of a mechanical bracket or frame (no text or symbols)B
natural_image
Isometric line drawing of a rectangular enclosure or housing unit (no text or symbols)TOOLS REQUIRED:
Socket Wrench • Phillips Screwdriver • Small Flat Blade Screwdriver
1-800-221-0932
www.metraonline.com
© COPYRIGHT 2004-2007 METRA ELECTRONICS CORPORATION
TABLE OF CONTENTS
Dash Disassembly 1,2
Kit Assembly 3
Final Assembly 4
2004-2006 LAND ROVER FREELANDER
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Put gear shifter into neutral position then remove shift knob. (Figure A)
3 Unclip and remove gear shifter trim panel. (Figure B)
4 Unclip and remove rear ashtray panel from back of center console. (Figure C)
5 Open center console lid and remove cubby box. (Figure D)
text_image
A
text_image
B
natural_image
Diagram of a hand operating a device with an upward arrow, no text or symbols present
natural_image
Diagram of a car intake manifold showing internal components and directional arrows (no text or labels)2004-2006 LAND ROVER FREELANDER
6 Remove the (2) screws securing the rear of the center console. (Figure E)
7 Remove the screw cover in front of the window switches then remove the (2) screws exposed underneath. (Figure F)
8 Unclip and remove the upper console finisher panel between the a/c vents and radio.. (Figure G)
9 Remove the (4) screws securing the center console. (Figure H)
Remove the (2) screws securing the radio.
H
natural_image
Top-down line drawing of a car air conditioning control panel with buttons and gauges (no text or labels)E
natural_image
Line drawing of a hand holding an open appliance with a small screen, showing internal components and a dotted line indicating a step (no text or symbols)F
natural_image
Technical line drawing of a mechanical assembly with arrows indicating motion or force (no text or symbols)G
natural_image
Line drawing of a car air conditioner unit with control panel and ventilation system (no text or symbols)2004-2006 LAND ROVER FREELANDER DIN HEAD UNIT PROVISION
1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A)
2 Slide the aftermarket head unit into the DIN cage until secure. (Figure B)
3 Slide the included pocket into the Radio Housing until secure. (Figure C)
4 Install kit assembly into dash.
natural_image
Line drawing of a hand using a tool to adjust or install a device component (no text or symbols visible)
natural_image
Technical line drawing of an electronic device casing with mounting brackets and control panel (no text or symbols)
natural_image
Technical line drawing of a computer drive chassis with labeled ports and mounting bracket (no text or symbols)FINAL ASSEMBLY
text_image
A B C D1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown.
(Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
2 Re-connect the negative battery terminal and test the unit for proper operation.
3 Reassemble radio and dash assemblies in reverse order of disassembly.
FINAL WIRING CONNECTIONS
Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit.
METRA / EIA WIRING CODE
12V Ignition / Acc ... R e d
12V Batt / Memory .. Yellow
Ground .... Black*
Power Antenna ..... Blue
Amp Turn-On ..... Blue / White
Amp Ground ..... Black / White
Illumination.....Orange
Dimmer ..... Orange / White
Right Front (+) ..... White
Left Front (-) ..... White / Black
Right Rear (+).....Violet
Right Rear (-) ..... Violet / Black
Left Rear (+).... Green
Left Rear (-) ..... Green / Black
*NOTE: When Black a wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer's specifications.