95-7309 - Kit voiture Metra - Free user manual and instructions

USER MANUAL 95-7309 Metra

INSTALLATION INSTRUCTIONS FOR PART 95-7309

APPLICATIONS

1996-2000 Hyundai Elantra

1995-2001 Hyundai Sonata

1997-2002 Hyundai Tiburon

2001-2006 Hyundai Santa Fe

95-7309

KIT FEATURES

• DDIN Head Unit Provision
- Stacked ISO DIN Head Unit Provision

KIT COMPONENTS

Interior view of a car dashboard with control panels and instrument (no visible text or symbols)

A) DDIN Trim Plate I B) DDIN Brackets C) Spacers -Thick and Thin D) 4 #10 X 3/4" Phillips Screws

A B C D TOOLS REQUIRED: Flat Blade Screwdriver | Phillips Screwdriver

1-800-221-0932

www.metraonline.com

© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION

TABLE OF CONTENTS

Dash Disassembly 1-5

Kit Assembly 6-7

Final Assembly 8

1996-2000 HYUNDAI ELANTRA

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove the dimmer switch panel then remove (1) Phillips screw exposed behind. (Figure A)
3 Unclip and remove shifter trim panel. (Figure B)
4 Remove (1) Phillips screw at bottom of radio trim panel. (Figure C)
5 Unclip and remove the temperature control cable under the drivers side dash from the white plastic bracket.
6 Remove (4) Phillips screws securing radio.

A

Diagram of a car dashboard with steering wheel, air vent, and control panel (no text or symbols)

B

Diagram of a car interior showing the intake manifold and dashboard (no text or symbols)

C

Interior view of a car dashboard with directional arrows indicating traffic flow (no text or symbols)

1997-2002 HYUNDAI TIBURON

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove the panel surrounding the shift lever. (Figure A)
3 Unclip and remove the radio trim panel. (Figure B)
4 Remove (2) Phillips screws securing the radio.

Line drawing of a car interior showing a lever mechanism with an upward arrow (no text or symbols)

B

Technical line drawing of a car interior showing airflow and wheel movement (no text or symbols)

1995-1998 HYUNDAI SONATA

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove trim panel around the shifter. (Figure A)
3 Remove (1) Phillips screw at bottom of radio trim panel.
4 Unclip and remove radio trim panel. (Figure B)
5 Remove (4) Phillips screws securing the radio.

Diagram of a car gear shift lever mechanism (no text or symbols)

B

Interior view of a car dashboard with steering wheel, air conditioner unit, and dashboard controls (no text or symbols)

1999-2001 HYUNDAI SONATA

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip and remove the trim panel in front of the shift lever and remove (2) Phillips screws exposed underneath. (Figure A)
3 Unclip and remove the shift lever trim panel. (Figure B)
4 Remove (2) Phillips screws at bottom of radio trim panel.
5 Unclip and remove radio trim panel. (Figure C)
6 Remove (4) Phillips screws securing the radio.

A-B A B

C

2001-2006 HYUNDAI SANTA FE

1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the ashtray and the (2) Phillips screws exposed in the cavity. (Figure A)
3 Unclip and remove trim panel with climate controls. (Figure B)
4 Remove (2) Phillips screws facing up at bottom of radio trim panel. (Figure C)
5 Unclip and remove the radio trim panel. (Figure D)
6 Remove (4) Phillips screws securing the radio.

D

Line drawing of an aircraft cockpit interior showing controls, dashboard, and directional arrow (no text or symbols)

A

Diagram of a vehicle dashboard with circular components and directional arrows indicating movement (no text or labels)

B

Line drawing of a vehicle's front view showing dashboard, steering wheel, and directional arrow (no text or symbols)

C

Line drawing of a mechanical device with control panel and directional arrows (no text or symbols)

NOTE: For the Hyundai Sonata 1991-2001, Hyundai Tiburon 1997-2002, and the Hyundai Santa Fe 2001-2006 vehicles you will need to attach the provided Thick spacers to the DDIN brackets. (Figure A)

NOTE: Spacers will need to be removed from shipping bar.

NOTE: For the Hyundai Elantra 1996-2000 vehicles you will need to attach the provided Thin spacers to the DDIN brackets. (Figure B)

A

Four 3D mechanical component diagrams arranged in a vertical row, no text or symbols present

B

Simple line drawing of four abstract geometric shapes arranged in a row, enclosed in a rounded rectangle (no text or symbols)

DOUBLE DIN HEAD UNIT PROVISION

1 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A)
2 Slide the DDIN radio unit into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure B)

A

Technical line drawing of a mechanical housing or enclosure with internal components and directional arrows indicating assembly (no text or symbols)

B

Technical line drawing of a computer drive chassis showing internal components and mounting holes (no text or labels)

NOTE: For the Hyundai Sonata 1991-2001, Hyundai Tiburon 1997-2002, and the Hyundai Santa Fe 2001-2006 vehicles you will need to attach the provided Thick spacers to the DDIN brackets. (Figure A)

NOTE: Spacers will need to be removed from shipping bar.

NOTE: For the Hyundai Elantra 1996-2000 vehicles you will need to attach the provided Thin spacers to the DDIN brackets. (Figure B)

A

Four 3D mechanical component diagrams arranged vertically, no text or symbols present

B

Simple line drawing of four abstract mechanical components arranged in a row within a rounded rectangle (no text or symbols)

STACKED ISO DIN HEAD UNIT PROVISION

1 Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A)
2 Slide the stacked ISO DIN units into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure B)

A

Technical line drawing of a mechanical assembly with internal components and directional arrows (no text or symbols)

B

Technical line drawing of a mechanical device casing with internal components and directional arrows indicating assembly (no text or symbols)

FINAL ASSEMBLY

1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recommends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
2 Re-connect the negative battery terminal and test the unit for proper operation.
3 Reassemble radio and dash assemblies in reverse order of disassembly.

FINAL WIRING CONNECTIONS

Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit.

A B C D

12V Ignition / Acc ... Red

12V Batt / Memory .. Yellow

Ground .... Black*

Power Antenna ..... Blue

Amp Turn-On ..... Blue / White

Amp Ground ..... Black / White

Illumination.....Orange

Dimmer ..... Orange / White

Right Front (+) ..... Gray

Right Front (-)..... Gray / Black

Left Front (+) ..... White

Left Front (-)..... White / Black

Right Rear (+)..... Violet

Right Rear (-) ..... Violet / Black

Left Rear (+).... Green

Left Rear (-) ..... Green / Black

*NOTE: When Black a wire is not present, ground radio to vehicle chassis.

All colors may not be present on all leads due to manufacturer's specifications.

NOTES

95-7309 INSTRUCTIONS