Premium VZ-23LED-E - Monitor ViewZ - Free user manual and instructions

Product Type	LED Monitor
Brand	ViewZ
Model	Premium VZ-23LED-E
Display Size	23 inches (diagonal)
Resolution	1920 x 1080 (Full HD)
Panel Type	TN (Twisted Nematic) with LED backlight
Brightness	250 cd/m²
Contrast Ratio	1000:1 (static)
Response Time	5 ms (gray to gray)
Viewing Angles	170° horizontal / 160° vertical
Input Signals	1x HDMI, 1x VGA, 1x DVI-D (optional)
Audio	Built-in speakers (2 x 2W)
Power Consumption	Typical: 25W, Standby: <0.5W
Power Supply	AC 100-240V, 50/60Hz (internal)
Dimensions (with stand)	21.5 x 16.1 x 7.5 inches (W x H x D)
Weight (with stand)	8.8 lbs (4 kg)
VESA Mount	100 x 100 mm
Adjustability	Tilt: -5° to +20°
Safety Features	Complies with CE, FCC, RoHS; Kensington lock slot
Cleaning Instructions	Use a soft, dry cloth. Avoid chemicals.
Accessories Included	HDMI cable, VGA cable, power cord, user manual

Frequently Asked Questions - Premium VZ-23LED-E ViewZ

How do I connect my monitor to a computer?

Use the HDMI or VGA cable included. Connect one end to the monitor and the other to your computer's video output.

Why is there no sound from the built-in speakers?

Ensure the monitor's audio cable is connected to your computer's audio output, or use HDMI which carries audio. Also check volume settings on both devices.

How do I adjust the screen brightness?

Press the Menu button on the monitor, navigate to Brightness/Contrast, and adjust using the arrow keys.

Can I mount this monitor on a wall?

Yes, it supports VESA 100x100 mm mounting. Use a compatible wall mount bracket.

What should I do if the screen is flickering?

Check the video cable connection. Try a different cable or port. Also ensure the refresh rate is set correctly (60Hz recommended).

How do I clean the monitor screen?

Use a soft, dry microfiber cloth. Do not apply liquids directly. For stubborn marks, slightly dampen the cloth with water.

What does the power LED indicate?

A blue/white LED means the monitor is on. An amber/orange LED indicates standby mode. No light means power is off.

How can I reset the monitor settings to factory defaults?

Open the Menu, go to Setup or Other, and select Factory Reset.

What is the warranty period for this monitor?

ViewZ typically offers a 2-year limited warranty. Check the included documentation for exact terms.

Why is the picture distorted or overlapping?

Ensure the resolution is set to 1920x1080 and the refresh rate to 60Hz. Also check for correct input source selection.

USER MANUAL Premium VZ-23LED-E ViewZ

Black computer monitor with a blank screen and a small circular base (no visible text or symbols)

USER MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

CONTENTS

SAFETY INSTRUCTION 2 \~ 3

CAUTIONS.... 4

FCC RF INTERFERENCE STATEMENT 5

INSTALLATION 6

CONNECTING WITH EXTERNAL EQUIPMENT....7

CONTROLS AND FUNCTIONS 8 \~ 16

MOUNTING GUIDE.... 17

D-SUB CONNECTOR PIN ASSIGNMENTS 18

POWER MANAGEMENT 19

SPECIFICATIONS 20

TROUBLE SHOOTING GUIDE 21

This Monitor was

Manufactured by ISO 9001

Certified Factory

SAFETY INSTRUCTION

Important Safety Instruction

1. Read these instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

Apolarized plug has two blades with one wider than the other.

Agrounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement of the bsolete outlet.

1. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus.

2. Only use attachment/accessories specified by the manufacturer.

3. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

1. Unplug this apparatus during lightning storms or when unused for long periods of time.

2. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped.

SAFETY INSTRUCTION

- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus.

14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation.

"WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture."

"The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus."

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated: dangerous voltage with in the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.

CAUTIONS

CAUTION

The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.

ATTENTION

POWER SUPPLY CORD IS USED AS MAIN POWER DISCONNECT DEVICE IN THIS PRODUCT. UNPLUG THIS PRODUCT FROM THE WALL OUTLET BEFORE REMOVING THE BACK COVER AND SERVICING

EMISSION CHARACTERISTICS TESTED BY SEMKO

THIS PRODUCT HAS BEEN TESTED AND HAS SHOWN COMPLIANCE WITH THE NATIONAL SPECIFICATIONS SUCH AS SWEDISH MPR 1990.10.(MPR II)

▶ NEVER REMOVE THE BACK COVER

Removal of the back cover should be carried out only by qualified personnel.

▶ DO NOT USE IN HOSTILE ENVIRONMENTS

To prevent shock or fire hazard, do not expose the unit to rain or moisture.

This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases.

▶ KEEP IN A WELL VENTILATED PLACE

Ventilation holes are provided on the cabinet to prevent the temperature from rising.

Do not cover the unit or place anything on the top of unit.

▶ AVOID HEAT

Avoid placing the unit in direct sunshine or near a heating appliance.

▶ TO ELIMINATE EYE FATIGUE

Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly on the monitor.

▶ BE CAREFUL OF HEAVY OBJECT

Neither the monitor itself nor any other heavy object should rest on the power cord.

Damage to a power cord can cause fire or electrical shock.

FCC RF

INTERFERENCE STATEMENT

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio, TV technician for help.
• Only shielded interface cable should be used.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment.

▶ DOC COMPLIANCE NOTICE

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the radio interference regulation of Canadian Department of communications.

INSTALLATION

Before setting up the monitor, ensure that the power to the monitor and other attached devices are turned off.

※ Notice: Stand & Screws are optional

A. Connecting the stand

1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Base into the Stand Body in the correct direction using the included screws in the accessory box.

Stand Base Stand Body

FS4x10 screws

1. Once assembled take the monitor up carefully and face the front side.

B. Positioning your display

Adjust the position of the panel in various ways for maximum comfort. (Tilt Range: -3°\~75°)

-3° 75°

CONNECTING WITH EXTERNAL EQUIPMENT

1. Rear Connection

1 2 3 4 5

1. PC STEROE IN.
2. VGA.
3. DVI.
4. HDMI.
5. DC 12V IN.

CONTROLS AND FUNCTIONS

2. Bottom Key Control

SOURCE MENU AUTO VOL Ø/1 1 2 3 4 5 6 7 8

1. SOURCE/

Selects VGA, DVI and HDMI inputs.

Selects an option in the OSD.

2. MENU

Activates or exits the OSD.

Moves previous menu or status in the OSD.

3, 4. AUTO/▼ & ▲

Moves another option in the OSD.

The ▲ button converts the aspect ratio as 16:9 or 4:3.

The AUTO/▼ button is auto adjustment function in the VGA input.

5, 6. VOL(-) & VOL(+)

Adjusts the volume and menu settings.

The VOL(-) button is the Sound off function.

7.

Turns the power on or off. There will be a few seconds delay before the display appears.

8. LED

Turned on with VGA, DVI and HDMI signals: blue color.

Turned on with no signal: red color.

Turned off: LED off.

CONTROLS AND FUNCTIONS

OSD Menu Description

All picture, sound settings and setup for the monitor can be adjusted in the OSD menu.

To adjust the OSD screen:

1. Press the MENU button to enter the OSD menu.
2. Press the ▲/▼ buttons to select the desired option. The selected option is yellow color.
3. Press the SOURCE/ button twice to enter the sub-menu and adjust the item.
4. Change the value you wish to adjust by using the VOL(-) & VOL(+) buttons.
5. Press the MENU button twice to exit the sub-menu and the adjusted item.
6. Press the MENU button again to exit the OSD menu.

1. Exit

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1024x1080 60Hz

Option	Function
Exit	Exits the OSD menu.

CONTROLS AND FUNCTIONS

1. Positioning
   

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1920x1080 60Hz

Positioning Exit Horizontal Vertical 50 50

Option	Function	Value
Exit	Returns to previous menu.
Horizontal	Adjusts the horizontally picture position.	0 ~ 100.
Vertical	Adjusts the vertically picture position.	0 ~ 100.

※Unavailable in DVI & HDMI inputs.

CONTROLS AND FUNCTIONS

1. Image Settings
   

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1920x1080 60Hz

Image Settings Exit Auto Adjust Pixel Clock 79 Phase 0

Option	Function	Value
Exit	Returns to previous menu.
Auto Adjust	Auto geometry adjustment.
Pixel Clock	Adjusts the vertical noise of screen image.	0 ~ 100.
Phase	Adjusts the number of horizontal picture elements.	0 ~ 100.

※ Unavailable in DVI & HDMI inputs.

CONTROLS AND FUNCTIONS

1. Color Settings
   

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1920x1080 60Hz

Color Settings sRGB Preset 9300K Preset 6500K Preset User Preset Exit Red +100 Green +100 Blue +100

Option	Function	Value
Color Adjust	Adjusts red, green & blue colors of the picture.	0 ~ 100.
Color Temp	Adjusts color temperature of the picture.	sRGB Preset, 9300K Preset, 6500K Preset, User Preset ^1) .

1) User Preset

Option	Function	Value
Exit	Returns to previous menu.
Red, Green, Blue	Adjusts red, green & blue colors of the picture.	0 ~ 100.

CONTROLS AND FUNCTIONS

1. OSD Settings
   

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1920x1080 60Hz

Option	Function	Value
Exit	Returns to previous menu.
Horizontal Position	Moves the horizontally OSD position.	0 ~ 100.
Vertical Position	Moves the vertically OSD position.	0 ~ 100.
OSD Hold Timer	Adjusts the display time of OSD.	0 ~ 100.
OSD Lock	Displays the menu of OSD settings only.	No / Yes

CONTROLS AND FUNCTIONS

1. Brightness / Contrast
   

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1920x1080 60Hz

Option	Function	Value
Exit	Returns to previous menu.
Brightness	Adjusts brightness of the screen.	0 ~ 100.
Contrast	Adjusts intensity of the image.	0 ~ 100.

CONTROLS AND FUNCTIONS

1. Language
   

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1920x1080 60Hz

Language Exit English Español Français Deutsch 한국어

Option	Function	Value
Exit	Returns to previous menu.
Language	Sets the language of OSD menu.	English, Spanish, French, Deutsch & Korean.

CONTROLS AND FUNCTIONS

8. Misc.

RGB Main Menu Exit Positioning Image Settings Color Settings OSD Settings Brightness / Contrast Language Misc. Resolution 1920x1080 60Hz

Miscellaneous Exit Initialize Aspect Ratio 16 : 9

Option	Function	Value
Exit	Returns to previous menu.
Initialize	Resets the monitor settings to the factory default.
Aspect Ratio	Converts the aspect ratio.	16:9 & 4:3

MOUNTING GUIDE

Wall mounting (Optional)

The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included in the delivery).

M4x10 screws

※ Attention!
You must use four M4x10 screws to assemble this monitor and the wall mount bracket.

D-SUB CONNECTOR

PIN ASSIGNMENTS

▶ Pin Assignments

This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card.

The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal.

This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.

Power Consumption

Mode	23”
Turned On	< 24W
No Signal & Turned Off	< 1W

LED Indicator

The power management feature of the monitor is comprised of three stages:

Turned on(blue), no signal(red) and turned off(LED off).

Mode	LED	Monitor Operation
Turned On	Blue	Normal Operation
No Signal	Red	Not Operation
Turned Off	Off	Not Operation

SPECIFICATIONS

	23"
LCD Type	23" Diagonal AM-TFT(Active-Matrix)
	Pixel pitch(mm): 0.2655(H) x 0.2655(V)
	Brightness: 250cd/m2 (Typical)
	Contrast ratio: 1000:1(Typical)
	Viewing angle: 160°/160°(H/V)
	Response time: 5ms(Typical)
Resolution (H x V)	1920X1080@60Hz
Frequency	Horizontal: 31~80kHzVertical: 56~75Hz
Input Signal	Digital Visual Interface (DVI 1.0 & HDCP 1.2)
	VGA (RGB-PC)
	HDMI Visual Interface (HDMI 1.3)
	PC Stereo in
Active Display Area (H x V)	509.76mm x 286.74mm
Packing Dimensions (W x D x H)	600mm x 160mm x 460mm (23.62" x 6.30" x 18.11")
Weight	Net: 5.7kg (12.57 lbs)
	Gross: 7.9kg (17.42 lbs)
Electrical Ratings	12V 2.0A (100-240V~, 50/60Hz)

▶▶ NOTE: Technical specifications are subject to change without notice.

TROUBLESHOOTING GUIDE

TROUBLE	TROUBLESHOOTING TIP
No image on display screen	1. Check that power cord of the Monitor have been connected securely into wall outlet or grounded extension cable or strip.2. Power switch should be in the ON position and LED is lit.3. Check that the Brightness and/or the Contrast adjustments of the Display have not been turned down to minimum levels.
“NO SIGNAL” message on screen	1. The signal cable should be completely connected to the video card/computer.2. The video card should be completely seated in its slot and the computer is switched ON.
Display image is not centered, too small or too large in PC mode	Push the down key in front side or Auto key in remote controller.
Vertical or Horizontal noise is present in the picture	Adjust Clock and Phase in the OSD.

WEEE Symbols

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

MEMO

MEMO

MEMO