E1942CW - Monitor LG - Free user manual and instructions

USER MANUAL E1942CW LG

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD MONITOR MODEL

E1942CW

E1945CW

CONTENTS

3 ASSEMBLING AND PREPARING

3 Unpacking
4 Parts and buttons
5 Setting up the Monitor set
5 - Attaching the Stand Base
5 - Detaching the Stand Base
6 - Mounting on a table
6 - Using the cable holder
8 - Mounting on a wall

9 USING THE MONITOR SET

9 Connecting to a PC
9 - D-SUB connection

11 CUSTOMIZING SETTINGS

12 Customizing Settings
12 - Menu Settings
13 - PICTURE
14 - COLOR
15 - DISPLAY
16 - OTHERS
17 SUPER ENERGY SAVING Setting
18 PICTURE MODE Setting

19 TROUBLESHOOTING

21 SPECIFICATIONS

21 E1942CW
22 E1945CW
23 Preset Modes (Resolution)
23 Indicator

24 PROPER POSTURE

24 Proper posture for using the Monitor set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

Illustration of a CD or DVD disc and its corresponding blank card (no text or symbols)

CD(Owner's Manual) / Card

D-SUB Cable

Power Cord AC-DC Adapter AC-DC Adapter

Black rectangular electronic device with a coiled cable and plug, shown against a white background (no text or symbols visible)

( Depending on the country ) ( Depending on the country )

Electric plug with three leads and a cable, no visible text or symbols

Stand Body

Stand Base

CAUTION

Do not use any unapproved accessories to ensure the safety and product life span.

Any damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE

The accessories supplied with your product may vary depending on the model.

Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

Parts and buttons

Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) Button (See p.11) 电源输入 DC-IN D-SUB Connection panel (See p.9)

Setting up the Monitor set

Attaching the Stand Base

1 Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

2 1 Attach the Stand Body to the monitor set.
2 Attach the Stand Base.
3 Tighten the screw to the right with a coin.

Stand Body 1 2 Stand Base 3

Detaching the Stand Base

1 Place the Monitor set with the screen side down on a flat and cushioned surface.

2 1 Pull out the Stand Body and Stand Base from the monitor set.
2 Turn the screw to the left with a coin.
3 Pull out the Stand Base.

Stand Body Stand Base

Stand Body Stand Base

CAUTION

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

Mounting on a table

1 Lift and tilt the Monitor set into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm 10 cm 10 cm 10 cm

2 Connect the AC-DC Adapter and Power Cord to a wall outlet.

电源输入 1 2 or 2 3 1

3 Press (Power) button on the bottom switch panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

Cable holder

WARNING

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Two diagrams showing hand positioning with a circle and a prohibition symbol, no text or labels present

Do not touch or press the screen when adjusting the angle of the monitor.

Line drawing of two hands holding a blank computer monitor with a red prohibition symbol (no text or labels)

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

Simple line drawing of hands holding a rectangular object with a circular prohibition symbol (no text or labels)

NOTE

Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

-5° 20° Front Rear

Using the Kensington security system

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor set and a table.

Illustration of a computer monitor connected to a cable with two magnified insets showing cable installation details (no text or symbols present)

NOTE

The Kensington security system is optional. You can obtain it from most electronics stores.

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm 10 cm 10 cm 10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1 Please, Use the screw and wall mount interface in accordance with VESA Standards.
2 If you use screw longer than standard, the monitor might be damaged internally.
3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4 VESA compatible.

5 Please use VESA standard as below.

784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm

787.4 mm (31.0 inch) and above

* Please use VESA standard wall mount pad and screws.

Model	E1942CWE1945CW
VESA (A x B) 75 x 75
Standard screw M4
Number of screws 4

CAUTION

Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

Use only an authorized LG wall mount and contact the local dealer or qualified personnel.

Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

Use the screws that are listed on the VESA standard screw specifications.

The wall mount kit will include an installation manual and necessary parts.

The wall mount bracket is optional. You can obtain additional accessories from your local dealer.

The length of screws may differ depending on the wall mount. Be sure to use the proper length.

For more information, refer to the instructions supplied with the wall mount.

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

电源输入 DC-IN D-SUB RGB OUT PC

NOTE

When using a D-Sub signal input cable connector for Macintosh

Technical line drawing of a dual-port electronic component (no text or symbols)

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

CAUTION

Connect the signal input cable and tighten it by turning the screws clockwise.

Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen.

Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.

Self Image Setting Function

Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode)

MODE /► AUTO /▼ INPUT / EXIT

NOTE NOTE

When you want to use two PC in our Monitor, please connect the signal cable(D-SUB) respectively in Monitor set.

If you turn the Monitor set on while it is cold, the screen may flicker. This is normal.

Some red, green, or blue spots may appear on the screen. This is normal.

"Self Image Setting" Function.

This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. (Only supported in Analog Mode)

'AUTO' Function.

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)

CUSTOMIZING SETTINGS

1 Press the desired button on the bottom of the Monitor set.
2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.

To return to the upper menu or set other menu items, use the up arrow ( ) button.

3 Select EXIT to leave the OSD menu.

MENU / t e0/← MODE /► AUTO /▼ INPUT / EXIT Monitor set Buttons

Button Description
MENU / t	Accesses the main menus.(See p.12)
	OSD LOCKED/ UNLOCKED	This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
e0/◄(SUPER ENERGY SAVING)	Use this button to enter SUPER ENERGY SAVING menu.For more information.(See p.17)
MODE / ►	Use this button to enter CUSTOM, TEXT, PHOTO, CINEMA, GAME menus.(See p.18)
AUTO / ▼	When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode)
	The best display mode E1942CW/E1945CW:1440 x 900
INPUT / EXIT	EXIT
	Exit the OSD(On Screen Display).
◀ (Power Button)	Turns the power on or off.
	Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red.

Customizing Settings

Menu Settings

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.
2 Set the options by pressing the ◀ or ▶ or ▼ buttons.
3 Select the "NEXT MENU" button to enter the more option settings.
4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.

MENU BRIGHTNESS 100 CONTRAST 70 WIDE/ORIGINAL WIDE 1/2 RESET NO 1/2 + NEXT MENU > MENU > NEXT MENU > PICTURE A SHARPNESS 5 EXIT

Each option is explained below.

MENU Description
BRIGHTNESS	To adjust the brightness, contrast of the screen
CONTRAST
WIDE/ORIGINAL	WIDE
	Switch to full screen mode according to input image signal.
	ORIGINAL
	Change the input image signal ratio to original.* This function works only if input resolution is lower than Monitor set ratio (16:9).
RESET	Restore all factory default settings. Press the◀ , ▶ buttons to reset immediately.

MENU > NEXT MENU Description
PICTURE SH	ARPNESS To adjust the clearness of the screen.
COLOR GAM	MA	To customize the color of the screen
	COLOR TEMP
DISPLAY HO	RIZONTAL	To adjust the position of the screen
	VERTICAL
	CLOCK	To improve the clarity and stability of the screen
	PHASE
OTHERS LANGUAGE		To customize the screen status for a user's operating environmentPOWER INDICA

Analog: D-SUB(Analog signal) input.

PICTURE

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.
2 Select the "NEXT MENU" button to enter the more option settings.
3 Enter to PICTURE by pressing the ▼ button.
4 Set the options by pressing the ◀ or ▶ or ▼ buttons.
5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.

MENU > NEXT MENU > PICTURE A SHARPNESS 5 EXIT

Each option is explained below.

MENU > NEXT MENU > PICTURE Description

SHARPNESS To adjust the clearness of the screen.

COLOR

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.
2 Select the "NEXT MENU" button to enter the more option settings.
3 Select COLOR by pressing the ▶ button.
4 Enter to COLOR by pressing the ▼ button.
5 Set the options by pressing the ◀ or ▶ or ▼ buttons.
6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.

MENU > NEXT MENU > COLOR γ GAMMA GAMMA 1 2/3 ← COLOR TEMP CUSTOM 1/4 RED 50 GREEN 50 BLUE 50 EXIT

Each option is explained below.

MENU > NEXT MENU > COLOR Description
GAMMA Set your own gamma value.	GAMMA 0, GAMMA 1, GAMMA 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images.
COLOR TEMP CUSTOM
	RED:Set your own red color levels.GREEN:Set your own green color levels.BLUE:Set your own blue color levels.
	Select the screen color.WARM:Set the screen to warm color temperature (more red).MEDIUM:Set the screen to medium color temperature.COOL:Set the screen to cool color temperature (more blue).

DISPLAY

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.
2 Select the "NEXT MENU" button to enter the more option settings.
3 Select DISPLAY by pressing the ▶ button.
4 Enter to DISPLAY by pressing the ▼ button.
5 Set the options by pressing the ◀ or ▶ or ▼ buttons.
6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.

MENU > NEXT MENU > DISPLAY HORIZONTAL 50 VERTICAL 50 CLOCK 50 PHASE 50 EXIT

Each option is explained below.

MENU > NEXT MENU > DISPLAY	Description
HORIZONTAL To move image left and right.
VERTICAL To move image up and down.
CLOCK To minimize any vertical bars	or stripes visible on the screen background.The horizontal screen size will also change.
PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

OTHERS

1 Press MENU button on the bottom of the Monitor set to display the MENU OSD.
2 Select the "NEXT MENU" button to enter the more option settings.
3 Select OTHERS by pressing the ▶ button.
4 Enter to OTHERS by pressing the ▼ button.
5 Set the options by pressing the ◀ or ▶ or ▼ buttons.
6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.

MENU > NEXT MENU > OTHERS LANGUAGE ENGLISH 1/17 POWER INDICATOR ON 1/2 WHITE BALANCE NO 1/2 D-SUB 800 X 600 60HZ t < ► ▼ EXIT

Each option is explained below.

MENU > NEXT MENU > OTHERS Description
LANGUAGE To choose the language	in which the control names are displayed.
POWER INDICATOR	Use this function to set the power indicator on the bottom side of the monitor to ON or OFF.If you set OFF, it will go off.If you set ON at any time, the power indicator will automatically be turned on.
WHITE BALANCE	If the output of the video card is different the required specifications,the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image.Activate this function when white and black colors are present in the screen.

SUPER ENERGY SAVING Setting

1 Press (SUPER ENERGY SAVING) button on the bottom of the Monitor set to display the SUPER ENERGY SAVING OSD.
2 Set the options by pressing the ◀ or ▶ or ▼ buttons.
3 Select EXIT to leave the OSD menu.

SUPER ENERGY SAVING SUPER ENERGY SAVING IS ACTIVE YOU SAVED 0.00 TREES!! POWER REDUCTION: 0W CO2 REDUCTION: 0g ON OFF RESET EXIT

Each option is explained below.

SUPER ENERGY SAVING Description
ON	Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function
OFF Disables SUPER ENERGY	SAVING.
RESET Resets the values of total energy consumption reduction and CO2 emission reduction estimates.

NOTE

TOTAL POWER REDUCTION: How much power is saved while using the monitor.

TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.

SAVING DATA(W/h)

	482 mm(19 inch)
SUPER SAVING 4 W/h

Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor.

LG calculated these values by using "broadcast video signal"

(including broadcast video: IEC 62087)

SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.

PICTURE MODE Setting

1 Press MODE button on the bottom of the Monitor set to display the PICTURE MODE OSD.
2 Set the options by pressing the ◀ or ▶ or ▼ buttons.
3 Select EXIT to leave the OSD menu.

PICTURE MODE CUSTOM TEXT PHOTO CINEMA GAME EXIT

Each option is explained below.

PICTURE MODE Description
CUSTOM	It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.
TEXT It is a mode that the screen is adjusted to the best for the text works.
PHOTO It is a mode that the screen is adjusted to the best to view pictures.
CINEMA It is a mode that the screen is adjusted to the best to view the videos.
GAME It is a mode that the screen is adjusted to the best to play a game.

TROUBLESHOOTING

Check the following before calling for service.

No image appears
Is the power cord of the display connected?	Check and see if the power cord is connected properly to the power outlet.
Is the power indicator light on?	Press the Power button.
Is the power on and the power indicator Red?	Adjust the brightness and the contrast.
Is the power indicator flickering?	If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.Try to turn on the PC.
Do you see an "OUT OF RANGE" message on the screen?	This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.
Do you see a "NO SIGNAL" message on the screen?	When the monitor is on "No-Signal" in 5 minutes, the monitor goes to DPM mode.

Do you see a "OSD LOCKED" message on the screen?
Do you see “OSD LOCKED” when you push MENU button?	• You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.

Display image is incorrect
Display Position is incorrect.	Press the AUTO button to automatically adjust your display image to the ideal setting.
On the screen background, vertical bars or stripes are visible.	Press the AUTO button to automatically adjust your display image to the ideal setting.
Any horizontal noise appearing in any image or characters are not clearly portrayed.	Press the AUTO button to automatically adjust your display image to the ideal setting.Check Control Panel ▶ Display ▶ Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).

CAUTION

Check Control Panel ▶ Display ▶ Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.

If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

Display image is incorrect
The screen color is mono or abnormal.	Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.Make sure the video card is properly inserted in the slot.Set the color setting higher than 24 bits (true color) atControl Panel▶ Settings.
The screen blinks.	Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?	Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com.Make sure to check if the video card supports Plug&Play function.

SPECIFICATIONS

E1942CW

Display Screen Type	48.2 cm (19 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 48.2 cm
	Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch)
Sync Input Horizontal Frequency	30 kHz to 61 kHz (Automatic)
	Vertical Frequency 56 Hz to 75 Hz (D-SUB)
	Input Form Separate Sync.
Video Input Signal Input 15 pin D-SUB Connector
Resolution Max D-SUB(Analog): 1440 x 900 @ 60 Hz
Plug & Play DDC 2B(Analog)
Power Consumption	On Mode: 13 W(Typ.)Sleep Mode ≤ 0.3 WOff Mode ≤ 0.3 W
Power Input 19 V	--- 1.2 A
AC-DC Adapter	Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
	OUTPUT: 19 V--- 1.3 A
Dimensions (Width x Height x Depth)	With Stand 44 cm x 37.4 cm x 16.8 cm
	Without Stand	44 cm x 30 cm x 5.7 cm
Weight	2.0 kg
Tilt Range	-5° to 20°
Environmental conditions	Operating Temperature Operating Humidity	10°C to 35 °C10 % to 80 %
	Storage Temperature Storage Humidity	-20°C to 60 °C5 % to 90 % non-Condensing
Stand Base Attached ( ), Detached (O)
Power cord Wall-outlet type

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

SPECIFICATIONS

E1945CW

Display Screen Type	48.2 cm (19 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 48.2 cm
	Pixel Pitch 0.3 mm x 0.3	mm (Pixel Pitch)
Sync Input Horizontal Frequency	30 kHz to 61 kHz (Automatic)
Vertical Frequency	56 Hz to 75 Hz (D-SUB)
Input Form Separate Sync.
Video Input Signal Input 15 pin D-SUB Connector
Input Form RGB Analog	(0.7 Vp-p/ 75 ohm)
Resolution Max D-SUB(Analog) : 1440 x 900 @ 60 Hz
Recommend VESA 1440 x 900 @ 60 Hz
Plug & Play DDC 2B(Analog)
Power Consumption	On Mode : 13 W(Typ.)Sleep Mode ≤ 0.3 WOff Mode ≤ 0.3 W
Power Input 19 V	--- 1.2 A
AC-DC Adapter	Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONICor Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONICor Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISEor Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
	OUTPUT: 19 V--- 1.3 A
Dimensions(Width x Height x Depth)	With Stand 44 cm x 37.4	cm x 16.8 cm
	Without Stand	44 cm x 30 cm x 5.7 cm
Weight	2.0 kg
Tilt Range	-5° to 20°
Environmental conditions	Operating Temperature Operating Humidity	10°C to 35 °C10 % to 80 %
	Storage Temperature Storage Humidity	-20°C to 60 °C5 % to 90 % non-Condensing
Stand Base Attached ( ), Detached (O)
Power cord Wall-outlet type

Product specifications shown above may be changed without prior notice due to upgrade of product functions.

Preset Modes (Resolution)

E1942CW/E1945CW

Display Modes (Resolution)	Horizontal Frequency(kHz)	Vertical Frequency(Hz)	Polarity(H/V)
640 x 350 31.469 70 +/-
720 x 400 31.468 70 -/+
640 x 480 31.469 60 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75 -/-
1440 x 900 55.5 60 +/-
1440 x 900 55.935 60 -/+ Recommend Mode
1440 x 900 70.635 75 -/+

Indicator

Mode LED Color
On Mode Red
Sleep Mode Blinking Red
Off Mode Off

PROPER POSTURE

Proper posture for using the Monitor set.

Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.

LG

Life's Good

Make sure to read the Safety Precautions before using the product.

Keep the Owner's Manual (CD) in an accessible place for future reference.

The model and serial number of the SET is located on the back and one side of the SET.

Record it below should you ever need service.

MODEL

SERIAL

ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA).

As an ENERGY STAR Partner LGE U. S. A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.