39500HUGC - Sewing machine Union Special - Free user manual and instructions

USER MANUAL 39500HUGC Union Special

Union Special INDUSTRIAL SEWING EQUIPMENT

ILLUSTRATED PARTS LIST

Mark IV, high speed, one or two needle machines with differential feed & chain cutter, for toe closing or crotch seaming applications

V. Vos-Siard

MANUAL NO. PT9604

STYLES

39500HUGC

39500RBAC

Second Edition Copyright 1996

By

Union Special Corporation Rights Reserved In All Countries

Printed in U.S.A. June 1996

PREFACE

This parts manual has been prepared to assist you in locating individual parts or assemblies on 39500 Series machines.

It is the desire of Union Special that each machine run at its optimum performance. Parts listed in this manual are designed specifically for your machine and are manufactured with utmost precision to assure long lasting service.

This manual has been comprised on the basis of available information. Changes in design and/or improvements may incorporate a slight modification of configuration in illustrations or part numbers.

On the following pages are illustrations and terminology used in describing the parts used on 39500 Series machines.

CONTENTS

PREFACE 2

SAFETY RULES 4

IDENTIFICATION OF MACHINES 5

CLASS DESCRIPTION 5

STYLE OF MACHINES 5

ILLUSTRATIONS 5

IDENTIFYING PARTS 6

NEEDLES 6

3950DHUGC THREADING DIAGRAM 7

39500RBAC THREADING DIAGRAM 8

EXPLODED VIEWS

MAIN FRAME, PRESSER FOOT RELEASE PARTS, 11

MISCELLANEOUS COVERS PLATES 11

MAIN FRAME, PRESSER FOOT RELEASE PARTS. 13

MISCELLANEOUS COVERS AND PLATES (CONT.) 13

CRANKSHAFT MECHANISM AND BUSHINGS 15

UPPER AND LOWER LOOPER DRIVING PARTS....17

UPPER AND LOWER KNIFE....19

FOOT LIFTER, THREAD TENSION PARTS AND MISCELLANEOUS EYELETS 21

FOOT LIFTER, THREAD TENSION PARTS AND MISCELLANEOUS EYELETS (CONT.) 23

NEEDLE DRIVE AND FEED MECHANISM 25

NEEDLE DRIVE AND FEED MECHANISM (CONT.) 27

CHAIN CUTTER SPARE PARTS LIST, FOR STYLES : 39500HUGC,RBAC

29480JAT1 CHAIN CUTTER ASSEMBLY, FOR STYLE 39500HUGC 29

29480JAT2 CHAIN CUTTER ASSEMBLY, FOR STYLE 39500RBAC 29

ACCESSORIES 31

OIL METERING PIN 32

NOTES 33

NUMERICAL INDEX OF PARTS 34

NUMERICAL INDEX OF PARTS 35

NOTES 37

NOTES 38

NOTES 39

SAFETY RULES

1. Before putting the machines described in this manual into service, carefully read the instructions. The starting of each machine is only permitted after taking notice of the instructions and by qualified operators.

IMPORTANT! Before putting the machine into service, also read the safety rules and instructions from the motor supplier.

1. Observe the national safety rules valid for your country.

2. The sewing machines described in this instruction manual are prohibited from being put into service until it has been ascertained that the sewing units which these sewing machines will be built into, have conformed with the EC Council Directives (89/392/EEC, Annex II B).

Each machine is only allowed to be used as foreseen. The foreseen use of the particular machine is described in paragraph "STYLES OF MACHINES" of this instruction manual. Another use, going beyond the description, is not as foreseen.

1. All safety devices must be in position when the machine is ready for work or in operation. Operation of the machine without the appertaining safety devices is prohibited.

2. Wear safety glasses.

3. In case of machine conversions and changes all valid safety rules must be considered. Conversions and changes are made at your own risk.

4. The warning hints in the instructions are marked with one of these two symbols:

1. When doing the following the machine has to be disconnected from the power supply by turning off the main switch or by pulling out the main plug:

8.1 When threading needle(s), looper, spreader etc.
8.2 When replacing any parts such as needle(s), presser foot, throat plate, looper, spreader, feed dog, needle guard, folder, fabric guide etc.
8.3 When leaving the workplace and when the workplace is unattended.
8.4 When doing maintenance work.
8.5 When using clutch motors without actuation lock, wait until the motor is stopped totally.

1. Maintenance, repair and conversion work (see item 8) must be done only by trained technicians or special skilled personnel under consideration of the instructions.

2. Any work on the electrical equipment must be done by an electrician or under direction and supervision of special-skilled personnel.

3. Work on parts and equipment under electrical power is not permitted. Permissible exceptions are described in the applicable sections of standard sheet DIN VDF 0105.

4. Before doing maintenance and repair work on the pneumatic equipment, the machine has to be disconnected from the compressed air supply. In case of existing residual air pressure, after disconnecting from compressed air supply (i.e. pneumatic equipment with air tank), the pressure has to be removed by bleeding.

IDENTIFICATION OF MACHINES

Each UNION SPECIAL machine is identified by a style number, which is stamped into the style plate affixed to the middle of the machine under the tension assembly. The serial number is stamped into the serial number plate affixed to the right rear base of the machine.

CLASS DESCRIPTION

Mark IV Hi-Styled high speed, light to medium duty machine. One or two needles, three and four thread overseaming machines, differential feed, trimming mechanism with spring pressed lower knife, automatic lubricating system. Improved air cooling system.

STYLE OF MACHINES

39500HUGC

High speed, two needle, two loopers, four thread mechanism with spring pressed lower knife, automatic lubricating system. Improved air cooling system. - Typical Application for closing the toe sections of women's seamless nylon hosiery on light to medium duty machine. Seam Specification 521-SSa-1(Mod.). Standard gauge 032, (1/8", 3.2mm). Stitch Range, 20-100 per inch; cam adjusted main and differential feeds. Recommended speed 8000R.P.M.. Recommended needle 154GFS, size 075/029.

39500RBAC

High speed, one needle, one looper, one spreader three thread overseam machine with spring pressed lower knife, automatic lubricating system. Improved air cooling system. - Typical Application - for crotch seaming nylon hosiery on light to medium duty machine. Seam Specification 521-SSa-1(Mod.). Standard gauges 032, (1/8", 3.2mm), 040, (5/32", 4.0mm). Stitch Range, 20-100 per inch; cam adjusted main and differential feeds. Recommended speed 8000R.P.M.. Recommended needle 154GFS, size 065/025.

ILLUSTRATIONS

This manual has been arranged to simplify ordering repair parts. Exploded views of various sections of the mechanism are shown so that the parts may be seen in their actual position in the machine. On the page opposite the illustration will be found a listing of the parts with their part numbers, description and the number of pieces required in the particular view being shown.

Numbers in the first column are reference numbers only, and merely indicate the position of the part in the illustration. The reference number should never be used in ordering parts. Always use the part number listed in the second column.

Component parts of sub-assemblies which can be furnished for repairs are indicated by indenting their descriptions under the description of the main sub-assembly. As an example refer to the following text.

1. 29477MX Upper Looper Thread Tube Assembly 1
2. 39568G Thread Tube ....1
3. 39568J Thread Tube Tension Spring .... 1
4. 22743 Set Screw, for thread tube tension spring .... 1

When a part is common to all machines covered in this manual, no specific usage will be mentioned in the description. However, when the parts for the various machines are not the same, the specific usage will be mentioned in the description and, if necessary, the difference will be shown in the illustration.

*NOTE: Ref. No. showing no Part No. is for location only. Part is not for sale separately.

A numerical index of all the parts shown in this manual is located at the back. This will facilitate locating the illustration and description when only a part number is known.

IDENTIFYING PARTS

Where the construction permits, each part is stamped with its part number. On some of the smaller parts and on those where construction does not permit, an identification letter is stamped in, to distinguish the part from similar ones.

PLEASE NOTE: Part numbers represent the same part, regardless of which manual they appear. On all orders please include part number, name and style of machine for which the part was ordered.

For optimum performance use only genuine Union Special replacement parts.

NEEDLES

Each needle has both a type and size number. The type number denotes the kind of shank, point, length, groove, finish and other details. The size number, stamped on the needle shank, denotes the largest diameter of the blade measured between the shank and the eye. Collectively, the type number and size number represent the complete symbol which is given on the label of all needles packed and sold by Union Special.

TYPE

DESCRIPTION

154 GFS Slabbed shank, round point, .046 inch double slab, standard length, curved blade, single groove, ball point, spotted, chromium plated - sizes 065/025, 070/027, 075/029, 080/032, 040.

When changing the needle, make sure it is fully inserted in the holder before the screw is tightened.

When ordering needles, please use the complete type and size numbers as printed on the package to ensure prompt and accurate processing of your order. A complete order should read as follows: "100 needles, type 154 GFS, size 075/029".

39500HUGC THREADING DIAGRAM

1 LOWER LOOPER THREAD

2 UPPER LOOPER THREAD

3 RIGHT LOOPER THREAD

4 LEFT LOOPER THREAD

ROUTE THREAD THRU TENSION POST SLOT PULL TUBE UP FOR THREADING ROUTE LOOPER IN FRONT OF LOOPER THREAD PULL-OFF TURN TO RELEASE PRESSER ARM SWING PRESSER ARM OUT

HUGC_1P
Thread machine in sequence as shown: (1) lower looper thread, (2) upper looper thread, (3) right needle thread and (4) left needle thread.

39500RBAC THREADING DIAGRAM

D TENSION NUT E TENSION SPRING FERRULE F TENSION SPRING. G TENSION POST H SPRING SHIELD J TENSION DISCS K TENSION POST SLOT L TENSION DISC FELT B THREAD EYELET TO UPPER LOOPER TO RIGHT NEEDLE TO RIGHT NEEDLE A CONE SUPPORT 70° 50° 35° C TENSION THREAD GUIDE M FRONT THREAD GUIDE P AUXILIARY LOOPER THREAD EYELET N UPPER LOOPER THREAD EYELET U PRESSER ARM X NEEDLES Y LOWER SPREADER A F LOOPER THREAD PULL-OFF AE NEEDLE THREAD CAM PULL-OFF AD NEEDLE THREAD EYELET AC TOP COVER NEEDLE THREAD EYELET AA UPPER LOOPER THREAD TUBE ASSEMBLY W UPPER LOOPER

EXPLODED VIEWS ...

Exploded view diagram of a mechanical assembly with numbered parts and Chinese label HUGC_3P at bottom

MAIN FRAME, PRESSER FOOT RELEASE PARTS, MISCELLANEOUS COVERS PLATES

Ref.			Amt.
No.	Part No.	Description	Req.

1. 39557B Presser Spring Plunger Cap Nut 1
2. 39557E Presser Spring Plunger Locking Nut 1
3. 39557C Presser Spring Plunger Adjusting Screw 1
4. 39557F Lock Nut, for adjusting screw 1
5. 39557 Presser Spring 1
6. 39557A Presser Spring Plunger 1
7. 39563X Top Cover Needle Thread Eyelet 1
8. 22569B Screw, for top cover needle thread eyelet 2
9. 39556A Presser Foot Release Bushing 1
10. 39582DK Top Cover, for Style 39500HUGC 1
11. 39582AD Top Cover, for Style 39500RBAC 1
12. 39582AF Oil Filler Cover 1
13. 39582V Spring 1
14. 39582AG Hinge Bracket 1
15. 51-103BLK Hinge Pin 1
16. 39582W Oil Guard 1
17. 22562A Screw, for hinge bracket 1
18. 39582XJ Top Cover Gasket 1
19. 22541 Screw, for top cover 8
20. 667D-8 Dowel Pin 2
21. 22565 Set Screw, for upper looper thread tube assembly and looper drive lever shaft ..... 1
22. 22565S Spot Screw, for upper looper drive lever shaft 1
23. 22569D Screw, for oil collector plate 1
24. 39594R Oil Collector Plate 1
25. 22571E Magnet Oil Drain Plug Screw 1
26. 29477MX Upper Looper Thread Tube Assembly 1
27. 39568G Thread Tube 1
28. 39568J Thread Tube Tension Spring 1
29. 22743 Set Screw, for thread tube tension spring 1
30. 22760H Screw, for oil filter screen and strainer 2

31. 39594G Oil Filter Screen 1

32. thru 65. See following page.

Exploded view diagram of a device with numbered parts and Chinese label 'Union Speed'

MAIN FRAME, PRESSER FOOT RELEASE PARTS, MISCELLANEOUS COVERS AND PLATES (CONT.)

Ref. No. Part No. Description Amt. Req.

1. thru 30. See preceding page.

2. 39594H Oil Strainer, felt 1

3. 22569D Screw, for chip guard 2
4. G39578U Chip Guard, for Style 39500HUGC 1
5. G39578WA Chip Guard, for Style 39500RBAC .... 1
6. 22569K Screw, for oil sight gauge 1
7. 22894AE Screw, for lower looper bar drive lever shaft 2
8. 39593H Oil Sight Gauge 1
9. 660-243 Oil Gauge Seal Ring 1
10. 643-480BLK Oil Tube 1
11. 660-885 Hose Clamp 1
12. 56393G Oil Filter 1
13. 56393V Oil Tube Spring 1
14. 666-280 Oil Tube 1
15. RI-37 Wire Ring 1
16. 39593C Oil Float 1
17. 39593D Oil Indicator 1
18. 39593J Elbow Fitting 1
19. 39582F Bottom Cover Extension....1
20. 22653D-4 Screw, for bottom cover extension 2
21. 39582BM Base Plate 1
22. 22541B Screw, for base plate 2
23. 39595 Isolator 2
24. 39582BL Air Duct, outer 1
25. 22569D Screw, for lower and outer air duct 2
26. 22586T Screw, for bottom cover 1
27. 22541B Screw, for bottom cover 12
28. 39582XK Bottom Cover Gasket 1
29. 39582DH Bottom Cover, for Style 39500HUGC 1
30. 39582BW Bottom Cover, for Style 39500RBAC .... 1
31. 51295B Isolator 2
32. 39582DN Feed Bar Cover Assembly, for Style 39500HUGC 1
33. 39198D Washer 1
34. 22758C Screw 1
35. 39582HF Feed Bar Cover, top, for Style 39500RBAC 1
36. 39582GL Feed Bar Cover, side, for Style 39500RBAC 1
37. 22804 Screw, for feed bar cover 1
38. 95956 Washer, for feed bar cover 1

A - NEEDLE DRIVE BEARING B - UPPER LOOPER DRIVE BEARING C - UPPER KNIFE DRIVE BEARING D - LOWER LOOPER DRIVE BEARING TORQUE: 19-21 in. lbs. (2.1-2.3Nm)

HUGC_4P

CRANKSHAFT MECHANISM AND BUSHINGS

Ref. No.	Part No.	Description	Amt. Req.
1.	39521J	Pulley	1
2.	22650CD-4	Screw, for pulley	2
3.	22569Y	Screw, for crankshaft ball bearing retaining plate	3
4.	39590H	Crankshaft Ball Bearing Retaining Plate	1
5.	660-835	Crankshaft Ball Bearing	1
6.	39590G	Crankshaft Ball Bearing Housing	1
7.	39590J	Thrust Washer	1
8.	39591L	Crank Chamber Cooling Fan	1
9.	39591H	Crank Chamber Cooling Fan Collar	1
10.	22894D	Spot Screw, for crank chamber cooling fan collar	2
11.	39590Y	Crankshaft Bearing inner, right	1
12.	660-443	"O" Ring, for crankshaft bearing, inner, right	1
13.	660-764	Oil Seal	1
14.	22565F	Screw, for crankshaft bearing, inner, right	1
15.	39590AC	Crankshaft Split Bearing	1
16.	97A	Screw, for crankshaft split bearing	2
17.	29477JM	Crankshaft and Needle Drive Arm Crank Assembly	1
18.	29477MC	Needle Drive Arm Crank and Connecting Rod Assembly	1
19.	22768C	Screw, for needle drive arm connecting rod pin	1
20.	22596H	Screw, for needle drive arm crank	1
21.	22729AB	Screw, for needle drive arm connecting rod	2
22.	51-228BLK	Vent Plug	1
23.	39541A	Feed Drive Eccentric Key	1
24.	40-46	Washer	1
25.	39593U-126	Metering Pin, marked "B"	1
26.	39536FN	Nut, for crankshaft	1
27.	39591B	Crankshaft Counterweight, right	1
28.	22747B	Screw, for crankshaft counterweights	6
29.	39591A	Crankshaft Counterweight, middle	1
30.	39591K	Crankshaft Counterweight, left	1
31.	87U	Screw, for oil splasher	1
32.	39594N	Oil Splasher	1
33.	666-94	Oil Wick and Spring	1
34.	39590AB	Crankshaft Bushing, left	1
35.	39590T	Crankshaft Bushing, Inner, left	1
36.	39544Z	Lower Looper Bar Bushing	1
37.	39552Z	Needle Drive Arm Crank Bushing, right	1
38.	39573AA	Upper Knife Drive Arm Bushing, right	1
39.	39555R	Foot Lifter Shaft Bushing, right	1
40.	39555P	Foot Lifter Shaft Bushing, left	1
41.	39573K	Upper Knife Drive Arm Crank Bushing, left	1
42.	39552U	Needle Drive Arm Crank Bushing, left	1

TORQUE: 19-21 in. lbs. (2.1-2.3Nm) TORQUE: 19-21 in. lbs. (2.1-2.3Nm) TORQUE: 14 in. lbs. (1.6Nm) TORQUE: 25-26 in. lbs. (2.8-2.9Nm) TORQUE: 19-21 in. lbs. (2.1-2.3Nm) TORQUE: 19-21 in. lbs. (2.1-2.3Nm) TORQUE: 19-21 in. lbs. (2.1-2.3Nm)

HUGC_5P

UPPER AND LOWER LOOPER DRIVING PARTS

Ref.No.	Part No.	Description	Amt.Req.
1.	39508A	Upper Looper, marked "CC"	1
2.	39543	Upper Looper Holder	1
3.	22564G	Screw, for upper looper holder	1
4.	39543A	Upper Looper Holder Collar	1
5.	77	Screw, for upper looper holder collar	1
6.	22565F	Spot Screw, for bushing and cam guide	1
7.	1025L	Lock Screw, for bushing and cam guide screw	1
*8.	39543T	Cam Follower	1
*9.	39543S	Bushing and Cam Guide	1
*10.	39543K	Upper Looper Drive Shaft	1
11.	22503F	Screw, for cam follower locking clamp	1
12.	39543E	Cam Follower Locking Clamp	1
13.	97	Screw, for ball joint guide fork	2
14.	39544J	Ball Joint Guide Fork, for upper looper drive lever	1
15.	482C	Upper Looper Shaft Collar	1
16.	22894C	Set Screw, for upper looper shaft collar	2
17.	22565	Set Screw, for upper looper rocker shaft	1
18.	39543X	Upper Looper Drive Lever Shaft	1
19.	22565S	Spot Screw, for upper looper drive lever shaft	1
20.	39543W	Upper Looper Drive Lever	1
21.	39543AT	Clamp Collar, for upper looper drive shaft	1
22.	22875M	Screw, for clamp collar	1
23.	39543P	Upper Looper Drive Shaft Thrust Washer	2
24.	39543AV	Upper Looper Drive Lever Connecting Rod	1
25.	39543AF	Nut, barrel	4
26.	87U	Screw, for oil splasher	1
27.	39594N	Oil Splasher	1
28.	77	Screw, for lower looper bar connecting link pin	1
29.	39544B	Lower Looper Bar Connecting Link	1
30.	39544D	Lower Looper Bar Connecting Link Pin	2
31.	77	Screw, for lower looper bar connecting link pin	1
32.	22894AE	Set Screw, for lower looper driving shaft	2
33.	482C	Lower Looper Drive Shaft Collar	1
34.	22894C	Set Screw, for lower looper drive shaft collar	2
35.	660-206	"O" Ring, for lower looper driving shaft	1
36.	39544V	Lower Looper Drive Shaft	1
	39508P	Lower Looper, for Style 39500HUGC	1
37.	39560B	Lower Spreader, for Style 39500RBAC	1
38.	39151	Nut, for lower looper bar	1
39.	39544	Lower Looper Bar	1
40.	39594N	Oil Splasher	1
41.	87U	Screw, for oil splasher	1
42.	29126DF	Lower Looper Bar Drive Lever and Connecting Rod Assembly	1
43.	39544AA	Lower Looper Drive Lever Connecting Rod	1
44.	22729E	Screw, for connecting rod	2
45.	22729D	Screw, for connecting rod	2
46.	39544S	Ball Joint Guide Fork	1
47.	97	Screw, for ball joint guide fork	2
48.	39544U	Lower Looper Bar Drive Lever	1

* The use of assembly No. 29126EC is recommended instead of the individual parts.

TORQUE: 26-28 in. lbs. (2,9-3.2 Nm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

HUGC_6P

UPPER AND LOWER KNIFE

Ref. No.	Part No.	Description	Amt. Req.
1.	39573AE	Upper Knife Drive Connection Rod	1
2.	22587J	Screw, for upper knife drive connection rod	2
3.	39573E	Upper Knife Drive lever	1
4.	55235E	Nut, for upper knife drive lever	1
5.	6042A	Washer, for upper knife drive lever	1
6.	55235D	Locking Stud, for upper knife drive lever	1
7.	39573H	Upper Knife Drive Arm	1
8.	39571D	Upper Knife Clamp Stud	1
9.	22738	Screw, for upper knife clamp stud	1
10.	39573A	Upper Knife Drive Arm Washer	1
11.	39572	Upper Knife Holder Block	1
12.	39570	Upper Knife	1
13.	39571F	Upper Knife Clamp	1
14.	39571B	Upper Knife Chain Guard	1
15.	14077	Nut, for upper knife clamp stud	1
16.	39525	Needle Guard, front, for Style 39500HUGC	1
-	39525H	Needle Guard, front, for Style 39500RBAC	1
17.	39525E	Needle Guard, rear, for Style 39500HUGC	1
-	39525J	Needle Guard, rear, for Style 39500RBAC	1
18.	22585A	Screw, for needle guards	2
19.	39580AJ	Throat Plate and Lower Knife Support Bracket, for Style 39500HUGC	1
-	39580A	Throat Plate Support, for Style 39500RBAC	1
20.	22653B12	Screw, for throat plate and lower knife support bracket	2
21.	39580F	Washer, for throat plate and lower knife support bracket	2
22.	14077	Nut, for lower knife holder locking screw	1
23.	22892B	Locking Screw, for lower knife holder	1
24.	39550C	Lower Knife Holder Locating Stud	1
25.	22729B	Screw, for lower knife holder locking stud	1
26.	39550AK	Lower Knife Holder, for Style 39500HUGC	1
-	39550AF	Lower Knife Holder, for Style 39500RBAC	1
27.	39549	Lower Knife	1
28.	39550AC	Knife Guide Plate	1
29.	39550AE	Lower Knife Clamp Spring	1
30.	605A	Screw, for lower knife clamp spring	1
31.	22588J	Screw, for lower knife clamp	1
32.	39550AD	Lower Knife Clamp	1
33.	39550X	Lower Knife Holder Spring	1
34.	C39524BA	Throat Plate, marked "LD", for single needle machines, for Style 39500HUGC	1
35.	22524	Screw, for throat plate	1
36.	39524BV	Throat Plate, for Style 39500RBAC	1

Technical diagram of a mechanical assembly with numbered parts, likely an engine or motor assembly.

FOOT LIFTER, THREAD TENSION PARTS AND MISCELLANEOUS EYELETS

Ref. No.	Part No.	Description	Amt. Req.
1.	39855	Foot Lifter Lever	1
2.	39555B	Foot Lifter Lever Spring	1
3.	39555D	Foot Lifter Intermediate Lever	1
4.	660-142	Cotter Pin, for foot lifter lever connecting link	2
5.	39555F	Foot Lifter Lever Connecting Link	1
6.	22566B	Screw, for foot lifter lever	1
7.	39555C	Foot Lifter Lever Arm	1
8.	22597E	Set Screw, for foot lifter lever arm	2
9.	12538	Lock Nut, for foot lifter lever arm	2
10.	627	Screw, for foot lifter lever arm	1
11.	12865	Foot Lifter Lever Shaft Thrust Collar	1
12.	88	Screw, for foot lifter lever shaft collar	2
13.	39555AE	Presser Arm Support Bracket Shaft	1
14.	22845B	Screw	1
15.	39555AF	Presser Arm Support Bracket, for Style 39500HUGC	1
15A.	39555AX	Presser Arm Support Bracket, for Style 39500RBAC	1
16.	22791H	Screw Pin, for presser arm	1
17.	258A	Nut, for presser arm screw	1
18.	88D	Screw	1
19.	61434G	Washer	1
20.	39556S	Presser Arm, for Style 39500HUGC	1
20A.	39556J	Presser Arm, for Style 39500RBAC	1
21.	99360	Screw	2
22.	95956	Washer	2
23.	99682L	Finger Guard	1
24.	39520BA	Presser Foot, for Style 39500RBAC	1
25.	39530G	Hinge Spring	1
26.	22768B	Screw, for stitch tongue and hinge spring	1
27.	39597AB	Stitch Tongue, marked "EK"	1
28.	22738	Screw, for chip guard	1
29.	39520BW	Chip Guard	1
30.	39568D	Presser Foot, for Style 39500HUGC	1
31.	39530G	Hinge Spring	1
32.	28	Screw, for hinge spring	1

1. thru 59. See following page.

Technical diagram of a mechanical assembly with numbered parts and labeled sections, including brackets, gears, and housing.

FOOT LIFTER, THREAD TENSION PARTS AND MISCELLANEOUS EYELETS (CONT.)

Ref. No. Part No. Description Amt. Req.

1. thru 32. See preceding page.

2. 39592Z Needle Tension Nut 4

3. 39592AK Tension Spring Ferrule 1
4. 39592AR4 Needle Thread Tension Spring, right, for Style 39500HUGC 1
5. 39592AR5 Needle Thread Tension Spring, left, for Style 39500HUGC .... 1
6. 39592AR1 Needle Thread Tension Spring, for Style 39500RBAC .... 1
7. 39592AR1 Looper Thread Tension Spring 2
8. 39592AD Thread Tension Disc 6 or 8
9. 39592AF Tension Disc Felt 3 or 4
10. 39592AL Tension Post 3 or 4
11. 8372A Washer 3 or 4
12. 39592AN Tension Post Bar, for Style 39500HUGC 1
    40A. 39592AM Tension Post Bar, for Style 39500RBAC 1
13. 39592AG5 Tension Post Mounting Bracket, for Style 39500HUGC 1
    41A. 39592AG3 Tension Post Mounting Bracket, for Style 39500RBAC .... 1
14. 22806A Screw, for tension mounting bracket 1
15. 40-46 Washer 1
16. 22847B Screw, for tension post mounting bracket 1
17. 39592AH Nut, for tension post 3 or 4
18. 22541B Screw, for Style 39500HUGC 1
19. 39582EW Feed Bar Cover Latch, for Style 39500HUGC 1
20. 88A Screw, for Style 39500HUGC 1
21. 39568AK Thread Tube Bracket Assembly, for Style 39500HUGC 1
22. 93A Screw, for upper looper thread eyelet 1
23. 39568E Auxiliary Lower Thread Eyelet 1
24. 93A Screw, for lower looper thread eyelet 1
25. 39568B Lower Looper Thread Eyelet, for Style 39500RBAC 1
26. 39568L Upper Looper Thread Eyelet, for Style 39500HUGC 2
27. 39568AD Looper Thread Eyelet Mounting Bracket, for Style 39500HUGC .... 1
    55A. 39568D Looper Thread Eyelet Mounting Bracket, for Style 39500RBAC .... 1
28. 22569B Screw, for looper thread eyelet mounting bracket 1
29. 43139A Nut, for looper thread eyelet screw 2
30. 22569D Screw....1
31. 39563N Needle Thread Eyelet 1

Exploded view diagram of a mechanical assembly with numbered parts and Chinese labels

HUGC_8P

49

NEEDLE DRIVE AND FEED MECHANISM

Ref. No.	Part No.	Description	Amt. Req.
1.	22541B	Screw, for main feed bar guide, left	2
2.	8372A	Washer, for main feed bar guide	2
3.	39535T	Main Feed Bar Guide, left, for Style 39500HUGC	1
3A.	39535W	Main Feed Bar Guide, left, for Style 39500RBAC	1
4.	39536E	Nut, for feed bar driving stud	2
5.	39536C	Feed Bar Driving Stud Bushing	2
6.	40-46	Washer, for crankshaft	1
7.	39536AF	Main Feed Bar Drive Connection	1
8.	39540B12	Main Feed Drive Eccentric	1
9.	39536AE	Differential Feed Bar Drive Connection	1
10.	93A	Screw, for main feed dog	1
11.	39505AB	Main Feed Dog, for Style 39500HUGC	1
11A.	39505BV	Main Feed Dog, for Style 39500RBAC	1
12.	39540B14	Differential Feed Driving Eccentric	1
13.	39534AC	Main Feed Bar, for Style 39500HUGC	1
13A.	39534	Main Feed Bar, for Style 39500RBAC	1
14.	39535J	Feed Bar Guide Block	1
15.	22797A	Screw, for knife drive block, for Style 39500HUGC	1
16.	39573DA	Knife Drive Block, for Style 39500HUGC	1
17.	39534G	Differential Feed Bar	1
18.	39535U	Differential Feed Bar Guide, right, for Style 39500HUGC	1
18A.	39535D	Differential Feed Bar Guide, right, for Style 39500RBAC	1
19.	22569B	Screw, for differential feed bar guide, right, for Style 39500RBAC	2
20.	22894R	Screw, for feed adjusting pin, for Style 39500HUGC	1
20A.	22565F	Screw, for feed adjusting pin, for Style 39500RBAC	1
21.	39535AB	Feed Adjusting Pin, marked "C", for Style 39500HUGC	1
21A.	39535C	Feed Adjusting Pin, marked "C", for Style 39500RBAC	1
22.	8372A	Washer, for differential feed bar guide screw	2
23.	39536B	Feed Bar Driving Stud	2
24.	22569G	Screw, for thrust washer	3
25.	39534AF	Differential Feed Bar Thrust Washer	1
26.	39538	Feed Lift Block	1
27.	39526AB	Differential Feed Dog, for Style 39500HUGC	1
27A.	39526BU	Differential Feed Dog, for Style 39500RBAC	1
28.	22528	Screw, for differential feed dog	1
29.	39543Y	Needle Drive Shaft Thrust Collar	1
30.	22782A	Screw, for needle drive shaft thrust collar	1

1. thru 49. See following page.

Exploded view diagram of a mechanical assembly with numbered parts and Chinese labels

49

HUGC_8P

NEEDLE DRIVE AND FEED MECHANISM (CONT.)

Ref. No. Part No. Description Amt. Req.

1. thru 30. See preceding page.

2. 39594N Oil Splasher 1

3. 22513D Screw, for oiler splasher 1
4. 39552BA Needle Drive Shaft 1
5. 39552AG Oil Seal, for needle drive shaft 1
6. 660-207 Oil Seal Ring 1
7. 39568AL Take Up Lever, for Style 39500HUGC 1
8. 39563AC Takeup Lever, for Style 39500RBAC 1
9. 88B Screw, for looper thread pull-off lever 2
10. 39568AM Looper Thread-Pull-off, for Style 39500HUGC 1
11. 39563P Needle Thread Cam Pull-off, for Style 39500RBAC 1
    39A. 39563AD Needle Thread Cam Pull-off, for Style 39500HUGC 1
12. 39552AW Needle Drive Arm, marked "X", for Style 39500HUGC 1
13. 39552AA Needle Drive Arm, for Style 39500RBAC 1
14. 39552AD Stop Pin, for needle 1
15. 22596H Screw, for needle drive arm 1
16. 154GFS Needle, for two needle machines 2
17. 39551R Needle Clamp Washer, for Style 39500HUGC 1
    44A. 39551H Needle Clamp Washer, for Style 39500RBAC 1
18. 14077A Nut, for needle clamp stud ....
19. 39551J Needle Clamp Stud 1
20. 87C Screw, for needle thread cam pull-off .... 1
21. 22513 Screw, for looper thread pull-off 1
22. 39551L Needle Spacer, (.022 inch) (.556mm), for Style 39500RBAC 2
23. 39551P Needle Spacer, for Style 39500HUGC 2

Technical diagram of a mechanical device with numbered components for identification and assembly reference.

CHAIN CUTTER SPARE PARTS LIST. FOR STYLES 39500HUGC.RBAC

29480JAT1 CHAIN CUTTER ASSEMBLY, FOR STYLE 39500HUGC

29480JAT2 CHAIN CUTTER ASSEMBLY, FOR STYLE 39500RBAC

Ref.			Amt.
No.	Part No.	Description	Req.

1. A25001-1 Pipe, for Style 39500HUGC 1
2. A25001-2 Pipe, for Style 39500RBAC 1
3. A25002-1 Block, for Style 39500HUGC 1
4. A25002-2 Block, for Style 39500RBAC .... 1
5. A25003 Upper Knife 1
6. A25004 Lower Knife 1
7. A25005 Support Pin, for lower knife 1
8. A25006 Spring Plate, for lower knife 1
9. A25007 Spring, for lower knife 1
10. A25008 Guide Plate, for upper knife 1
11. A25009 Finger Guard, for Style 39500HUGC 1
12. 22569B Screw, for block 1
13. A21028 Screw, for pipe (M4 x 15) 2
14. A21093 Spring Washer, for (M4) 2
15. A21092A Screw, for upper knife (M3 x 6) 3
16. A21092B Screw, for spring (M3 x 4) 1
17. A19958 Set Screw 1

Technical diagram showing exploded view of a kit with labeled parts including a container, screwdriver, and mechanical components.

HUGC_9P

ACCESSORIES

Ref.			Amt.
No.	Part No.	Description	Req.

1. 21388AU Socket Wrench, size 3/8" 1
2. 118 Tweezers 1
3. 21227BF Feed Eccentric Hook 1
4. WR65 Allen Wrench, size 1/16" 1
5. 116 Wrench, size 9/32" 1
6. 28604R Machine Oil, 16 fl. oz. 1
7. 39899A Looper Threader 1
8. 21375BB Belt Guard 1
9. 80 Belt Guard Screws 2
   Plastic Machine Cover (not shown) 1
10. Threading Diagram (not shown) 1

OIL METERING PIN

39536FN 39593U 40-46

HUGC_10P

Beginning with machine serial number 1620485 the wood oil metering plug is now being replaced by a steel metering pin which is inserted inside the main shaft on all 39500 Class Machines.

The pin is easy to remove. On the "Mark IV" machines the head is protruding beyond the end of the shaft and it can be pulled out with tweezers. With a wood plug the rate of oil flow was determined by the grain of the wood itself and could not be varied or adjusted. The steel pin, on the other hand, can be easily replaced with a slightly larger or smaller diameter pin to reduce or increase the flow to a precise degree.

NOTE: One final point - metering pins can not be added to machines with serial numbers below 1620485, because the crankshafts are not prepared for them. A new crankshaft assembly would have to be installed with the pre-selected metering pin in it.

39593U METERING PIN SIZE CHART
PART NUMBER	PIN DIAMETER
	INCH	MM
39593 U-125	0.1250	3.175
39593 U-126	0.1260	3.200
39593 U-1265	0.1265	3.213
39593 U-127	0.1270	3.225
39593 U-1275	0.1275	3.238
39593 U-128	0.1280	3.251
39593 U-1285	0.1285	3.263
39593 U-129	0.1290	3.276

NOTES

NUMERICAL INDEX OF PARTS

Part No. Page No.	Part No. Page No.	Part No. Page No.	Part No. Page No.
1025L....17	22804....13	39541A....15	39556S....21
116....31	22806A....23	39543....17	39557....11
118....31	22845B....21	39543A....17	39557A....11
12538....21	22847B....23	39543AF....17	39557B....11
12865....21	22875M....17	39543AT....17	39557C....11
14077....19	22892B....19	39543AV....17	39557E....11
14077A....27	22894AE....13,17	39543E....17	39557F....11
154GFS....27	22894C....17	39543K....17	39560B....17
21227BF....31	22894D....15	39543P....17	39563AC....27
21375BB....31	22894R....25	39543S....17	39563AD....27
21388AU....31	258A....21	39543T....17	39563N....23
22503F....17	28....21	39543W....17	39563P....27
22513....27	28604R....31	39543X....17	39563X....11
22513D....27	29126DF....17	39543Y....25	39568AD....23
22524....19	29477JM....15	39544....17	39568AK....23
22528....25	29477MC....15	39544AA....17	39568AL....27
22541....11	29477MX....11	39544B....17	39568AM....27
22541B....13,23,25	39151....17	39544D....17	39568B....23
22562A....11	39198D....13	39544J....17	39568D....21,23
22564G....17	39505AB....25	39544S....17	39568E....23
22565....11,17	39505BV....25	39544U....17	39568J....11
22565F....15,17,25	39508A....17	39544V....17	39568L....23
22565S....11,17	39508P....17	39544Z....15	39570....19
22566B....21	39520BA....21	39549....19	39571B....19
22569B....11,23	39520BW....21,23	39550AC....19	39571D....19
22569B....25,29	39521J....15	39550AD....19	39571F....19
22569D....11,13,23	39524BV....19	39550AE....19	39572....19
22569G....25	39525....19	39550AF....19	39573A....19
22569K....13	39525E....19	39550AK....19	39573AA....15
22569Y....15	39525H....19	39550C....19	39573AE....19
22571E....11	39525J....19	39550X....19	39573DA....25
22585A....19	39526AB....25	39551H....27	39573E....19
22586T....13	39526BU....25	39551J....27	39573H....19
22587J....19	39530G....21	39551L....27	39573K....15
22588J....19	39534....25	39551P....27	39580A....19
22596H....15,27	39534AC....25	39551R....27	39580AJ....19
22597E....21	39534AF....25	39552AD....27	39580F....19
22650CD-4....15	39534G....25	39552AA....27	39582AD....11
22653B12....19	39535AB....25	39552AG....27	39582AF....11
22653D-4....13	39535C....25	39552AW....27	39582AG....11
22729AB....15	39535D....25	39552BA....27	39582BL....13
22729B....19	39535J....25	39552U....15	39582BM....13
22729D....17	39535T....25	39552Z....15	39582BW....13
22729E....17	39535U....25	39555AE....21	39582DH....13
22738....19,21	39535W....25	39555AF....21	39582DK....11
22743....11	39536AE....25	39555AX....23	39582DN....13
22747B....15	39536AF....25	39555B....21	39582EW....23
22758C....13	39536B....25	39555C....21	39582F....13
22760H....11	39536C....25	39555D....21	39582GL....13
22768B....21	39536E....25	39555F....21	39582V....11
22768C....15	39536FN....15	39555P....15	39582HF....13
22782A....25	39538....25	39555R....15	39582W....11
22791H....21	39540B12....25	39556A....11	39582XJ....11
22797A....25	39540B14....25	39556J....21	39582XK....13

NUMERICAL INDEX OF PARTS
Part No. Page No.

39590AB	15
39590AC	15
39590G	15
39590H	15
39590J	15
39590T	15
39590Y	15
39591A	15
39591B	15
39591H	15
39591K	15
39591L	15
39592AD	23
39592AF	23
39592AG3	23
39592AG5	23
39592AH	23
39592AK	23
39592AL	23
39592AM	23
39592AN	23
39592AR1	23
39592AR4	23
39592AR5	23
39592Z	23
39593C	13
39593D	13
39593H	13
39593J	13
39593U-125	32
39593U-126	15,32
39593U-1265	32
39593U-127	32
39593U-1275	32
39593U-128	32
39593U-1285	32
39593U-129	32
39594G	11
39594H	13
39594N	15, 17, 27
39594R	11
39595..	13
39597AB	21
39855	21
39899A	31
40-46	15, 23, 25
43139A	23
482C	17
51-103BLK	11
51-228BLK	15
51295B	13
55235D	19
55235E	19
56393G	13

Part No. Page No.

56393V	13
6042A	19
605A	19
61434G	21
627	21
643-480BLK	13
660-142	21
660-206	17
660-207	27
660-243	13
660-443	15
660-764	15
660-835	15
660-885	13
666-280	13
666-94	15
667D-8	11
77	17
80	31
8372A	23, 25
87C	27
87U	15, 17
88	21
88A	23
88B	27
88D	21
93A	23, 25
95956	13, 21
97	17
97A	15
99360	21
99682L	21
A19958	29
A21028	29
A21092A	29
A21092B	29
A21093	29
A25001-1	29
A25001-2	29
A25002-1	29
A25002-2	29
A25003	29
A25004	29
A25005	29
A25006	29
A25007	29
A25008	29
A25009	29
C39524BA	19
G39578U	13
G39578WA	13
R1-37	13
WR65	31

MACHINE INVENTORY INFORMATION
UNIT NUMBER	MAKER'S NAME	MACHINE STYLE	SERIAL NUMBER	NEEDLE TYPE	DATE OF PURCHASE

ADDITIONAL INFORMATION:

NOTES

NOTES

NOTES

World map with latitude and longitude grid lines, showing continents and oceans (no text labels)

WORLDWIDE SALES AND SERVICE

Union Special Corporation maintains sales and service facilities throughout the world. These offices will aid you in the selection of the right sewing equipment for your particular operation. Union Special Corporation representatives and service technicians are factory trained and are able to serve your needs promptly and efficiently. Whatever your location, there is a qualified representative to serve you.

Corporate Office:

One Union Special Plaza

Huntley, IL 60142

Phone: 847·669·5101

Fax: [phone]

European Distribution Center:

Union Special GmbH

Raiffeisenstrasse 3

D-71696 Möglingen, Germany

Tel: [phone]

Fax: [phone]

Brussels, Belgium

Charlotte, N.C.

El Paso, TX

Hong Kong, China

Huntley, IL

Leicester, England

Lille, France

Miami, FL

Milan, Italy

Möglingen, Germany

Montreal, Quebec

Osaka, Japan

Santa Fe Springs, CA

Other Representatives throughout all parts of the world.

Finest Quality

Union Special® INDUSTRIAL SEWING EQUIPMENT