AVM14AB - Washing machine GE - Free user manual and instructions

USER MANUAL AVM14AB GE

Room Air Conditioners

Owner's Manual & Installation Instructions

AVM14 AVM22

AVM15 AVM24

AVM18 AVN24

AVP24

Stylized white logo design with swirling lines on black background (no text or symbols)

Part. No. 23-11-2129N-001 Pub. No. 49-7374-1 CG 11-98

Safety Information

Safety Precautions....3

Use of Extension Cords .....3

Use of Adapter Plugs ....3

Operating Instructions

Controls 4,5

Care and Cleaning ....6

Installation Instructions

Preparing to Install the

Air Conditioner....7

Window Installation .....8-12

Through-the-Wall .....13

Troubleshooting Tips

Before You

Call For Service ....14

Normal Operating Sounds .....14

Customer Service

Warranty 15

Service Telephone

Numbers ....Back Cover

Congratulations!

You Are Now Part of the GE Family

Welcome to the GE family. We're proud of our quality products and we are committed to providing dependable service. You'll see it in this easy-to-use Owner's Manual and you'll hear it in the friendly voices of our customer service department.

Best of all, you'll experience these values each time you use your air conditioner. That's important, because your new air conditioner will be part of your family for many years. And we hope you will be part of ours for a long time to come.

We thank you for buying GE. We appreciate your purchase, and hope you will continue to rely on us whenever you need quality appliances for your home.

Black-and-white photo of a man sleeping on a sofa with a baby, no visible text or symbols

GE & You, A Service Partnership.

IMPORTANT!

Fill out and return the Consumer Product Registration Card that is packed with this product.

FOR YOUR RECORDS

Write the model and serial numbers here:

#

#

You can find them on a label near the air discharge area and/or on a label on the side of the air conditioner.

Staple sales slip or cancelled check here.

Proof of the original purchase date is needed to obtain service under the warranty.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.

IF YOU NEED SERVICE

You'll find many answers to common problems in the Before You Call For Service section. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

If you do need service, you can relax knowing help is only a phone call away. A list of toll-free customer service numbers is included in the back section. Or, you can always call the GE Answer Center ^® at 800.626.2000, 24 hours a day, 7 days a week.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

• Use this appliance only for its intended purpose as described in this Owner's Manual.
  ■ This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.
  ■ Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.
  ■ Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■ Turn the mode control to OFF and unplug your air conditioner before making any repairs or cleaning.
NOTE: We strongly recommend that any servicing be performed by a qualified individual.
■ For your safety...do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

USE OF EXTENSION CORDS— 115-Volt models only

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 14 gauge, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 125 volts.

CAUTION:

DO NOT use an extension cord with any of the 230/208 volt models.

USE OF ADAPTER PLUGS -115-Volt models only

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the air conditioner until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

Features and appearance may vary.

OFF HIGH FAN LOW FAN LOW COOL HIGH COOL HIGH COOL LOW COOL ENERGY SAVER

MODE CONTROL TEMP CONTROL
1

COOLER 1 2 3 4 5 6 7 8 9 10

2

Controls

Mode Control

7 HIGH COOL and LOW COOL provide cooling with different fan speeds.

HIGH FAN and LOW FAN provide air circulation and filtering without cooling.

The ENERGY SAVER feature provides for either HIGH COOL or LOW COOL selection. The fan will run continuously in the ENERGY SAVER mode. It will change to a lower RPM speed when the compressor cycles off. When the compressor cycles back on, the fan speed will change back to the higher speed.

NOTE: If you move the mode control from a cool setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a cool setting.

Cooling Descriptions

For Normal Cooling—Select HIGH or LOW COOL with the temp control at 5.

For Maximum Cooling—Select HIGH COOL with the temp control at 10.

For Quieter & Nighttime Cooling—Select LOW COOL with the temp control at 5.

Temp Control

The temp control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the same level of comfort. When you turn the knob to a higher number the indoor air will become cooler. Turn the knob to a lower number and the indoor room will become warmer.

About the controls on the air conditioner.

Additional controls and important information.

Vent Control

When set at CLOSE, only the air inside the room will be circulated and conditioned. When set at OPEN, some inside air is exhausted outside.

Closed Open

Air Direction

Two levers on each side of the grille let you control the air direction left or right.

Fingertip pressure on the tabs adjusts the air direction up or straight ahead.

Do not adjust the louvers down any lower than straight out. Air that is blown down will affect the thermostat, causing the air conditioner to turn off before the room is cooled.

Line drawing of a hand pointing at a window with horizontal lines (no text or symbols)

Care and cleaning of the air conditioner.

Grille and Case

Turn the air conditioner off and remove the plug from the wall outlet before cleaning.

To clean, use water and a mild detergent. Do not use bleach or abrasives.

Outdoor Coils

The coils on the outdoor side of the air conditioner should be checked regularly. If they are clogged with dirt or soot they may be professionally steam cleaned, a service available through your GE service outlet.

Simple line drawing of an air conditioner unit mounted on a wall (no text or symbols)

Air Filter

The air filter behind the front grille should be checked and cleaned at least every 30 days or more often if necessary.

To remove:

Lift the top of the filter and gently pull it up.

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it.

CAUTION: DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

Line drawing of a window with a hand opening the top panel (no text or symbols)

Preparing to install the air conditioner.

Read these instructions completely and carefully.

Before You Begin

NOTE TO INSTALLER: Leave these instructions with the air conditioner after installation is completed.

NOTE TO CONSUMER: Keep this Owner's Manual and Installation Instructions for future use.

IMPORTANT NOTES:

For personal safety, this air conditioner must be properly grounded.

It is important to have the wall outlet and circuit checked by a qualified electrician if there is any doubt as to whether a proper ground exists.

Follow National Electric Codes (NEC) and/or local codes and ordinances.

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

Electrical Requirements

Some models require 115/120-volt a.c., 60 Hz grounded outlet protected with a 15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt a.c., protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

Tools You Will Need

■ Hex driver or wrench
■ Flat-blade screwdriver
■ Ruler or tape measure
■ Scissors or knife

■ Pencil
■ Level
■ Hammer

Window Installation Instructions

Parts Included

2 sill brackets 2 support brackets Foam top window gasket Case Window locking bracket 2 filler panels 5/8" machine screws (2) and nuts (2) 5/8" carriage bolts (2) and nuts (2) 1" screws (4) 5/8" screws (5) 3/8" hex head screws (8)

Read completely, then follow step-by-step.

Window Requirements

■ These instructions are for a standard double-hung window. You will need to modify them for other types of windows.
■ The air conditioner can be installed without the filler panels if needed to fit in a narrow window. See the window opening dimensions to the right.
■ All supporting parts must be secured to firm wood, masonry or metal.
■ The electrical outlet must be within reach of the power cord.

18½" min. 30½" to 46½" (with filler panels) 26½" min. (without filler panels)

Window opening dimensions are for a standard double-hung window.

Storm Window Requirements

A storm window frame will not allow the air conditioner to tilt towards the outside and will keep it from draining properly. To adjust for this, attach a piece of wood to the stool.

1/2" higher than frame Storm window frame Wood Stool

WOOD PIECES—

WIDTH: 2"

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2" higher than the top of the storm window frame.

Attach securely with nails or screws provided by the installer.

3

Remove the Air Conditioner from the Case

A Remove the air filter. Lift the top of the filter and gently pull it up.

Line drawing of an air conditioner unit with a hand opening the lid (no text or symbols)

B Remove the 2 screws and lift off the front grille. Keep these screws to re-attach the grille later.

Remove screws

C Remove one screw from each side of the case. Keep these ground/anti-theft screws so they may be replaced at the end of the installation.

Case Remove screw Air conditioner

D Slide the air conditioner out of the case by grasping the rear of the evaporator cover and pulling forward while bracing the case.

NOTE: The air conditioner is very heavy. It may require two or more people to remove it from the case.

4

Attach the Filler Panels to the Case

Attach filler panels to the existing holes in the case using eight #8 x 3/8" long hex head screws.

Filler panel Top bar Bottom bar

5

Install the Case in the Window

A Open the window and mark the centerline on the stool.

Mark centerline

B Carefully place the case in the window and align the center of the bottom tie bar with the centerline on the window stool. Do not release your grip on the case until the window is in its final position.

Top retainer bar Bottom tie bar

C Close the window until it touches behind the top retainer bar.

D Secure the case through the case track into the window stool on each side, using two 1" screws.

Secure to stool

6

Assemble and Attach the Sill and Support Brackets

A Loosely attach the sill brackets to the support brackets with 5/8" long carriage bolts and nuts.

Carriage bolt Sill bracket Support bracket Nut

B Find the track hole that aligns with the sill bracket on the outer edge of the window sill. Using the 5/8" long machine screws and nuts attach the support brackets to the case track hole on each side.

Track hole Sill

C Attach both sill brackets to the window sill using a 1" long screw on each side.

D Tighten the bolts and nuts on both sides.

Technical line drawing of a mechanical assembly with a Level indicator (no text or symbols present)

NOTE: When finished, use a level to make sure the case tilts to the outside 1/4" minimum. This prevents water from entering the room.

Install the Window Filler Panels and Locking Bracket

A Extend the filler panels to fill the window opening.
B Secure the panels using four 5/8" long screws.

Technical line drawing of a mechanical assembly with a hand holding a tool, showing internal components and alignment lines (no text or symbols)

C Attach the window locking bracket with a 5/8" screw.

Simple line drawing of a screwdriver inserted into a rectangular block (no text or symbols)

Install the Window Gasket and Replace the Air Conditioner

A Cut the foam top window gasket to the window width. Stuff the foam between the glass and the window to prevent air and insects from getting into the room.

Hand holding a tool interacting with a transparent panel (no text or symbols visible)

B Slide the air conditioner into the case and replace the front grille. Install the two ground/anti-theft screws removed at the beginning of the installation.

Architectural line drawing of a window with slatted door and ventilation grilles (no text or symbols)

C Install the front grille and attach to case using the 2 screws removed previously. Reinstall the air filter to the front grille.
D Make sure the unit is OFF before inserting cord plug into the outlet.
Check all seals and plug any remaining air gaps with a suitable weatherproof caulk.

Through-the-Wall Installation

The case may be installed through-the-wall in both existing and new construction.

Read completely, then follow step-by-step.

1

IMPORTANT:

■ Any side louvers must project on the outdoor side of the wall.
■ The room side of the case must project into the room at least 1^1/2 from the finished wall.
■ The case must be installed level from side-to-side and with a 1/4" tilt from front to rear.

A Remove the air conditioner from the case. For specific instructions, refer to the Window Installation Instructions.

B Make certain a wall receptacle is available close to the hole location or make arrangements to install a receptacle.

C Determine the size of wall opening by adding 1/8" to the height and width of the case. Measure height from the top of the case to the bottom of the rail.

D Place the case in the wall opening and secure the bottom rail, case sides and top with 12 1" long #10 wood screws.

NOTE: Drill pilot holes, if necessary, for proper installation. If the frame is oversized, use shims to prevent case distortion.

Line drawing of a rectangular metal enclosure with mounting holes and dashed reference lines (no text or symbols)

2

Finish the Wall Opening

Caulk all four sides on the outdoor side of the case to prevent moisture from getting through to the interior wall. Use of flashing (drip rail) will further prevent water from dripping inside the wall and down the outside of the building.

Brick veneer Lintel angle (if required) Caulking Plaster line Trim molding (if desired) Holes for #10 1" long wood screws Roomside Grounding/anti-theft screw Flashing (drip rail) Caulking Caulking (between bottom rail and flashing) 1½" min.

Before you call for service...

Troubleshooting Tips

Save time and money! Review the chart below first and you may not need to call for service.

Problem Possible Causes	What To Do
Air conditioner does not start	The air conditioner is unplugged.	Make sure the air conditioner plug is pushed completely into the outlet.
	The fuse is blown/circuit breaker is tripped.	Check the house fuse/circuit breaker box and replace the fuse or reset the breaker.
	Power failure.	If power failure occurs, turn the mode control to OFF. When power is restored, wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload.
Air conditioner does not cool as it should	Airflow is restricted.	Make sure there are no curtains, blinds or furniture blocking the front of the air conditioner.
	The temp control may not be set high enough.	Turn the knob to a higher number. The highest setting provides maximum cooling.
	The air filter is dirty.	Clean the filter at least every 30 days. See the Operating Instructions section.
	The room may have been hot.	When the air conditioner is first turned on you need to allow time for the room to cool down.
	Cold air is escaping.	Check for open furnace floor registers and cold air returns. Set the air conditioner's vent to the closed position.
	Cooling coils have iced up.	See freezing up below.
Air conditioner freezing up	Ice blocks the air flow and stops the air conditioner from cooling the room.	Set the mode control at HIGH FAN or HIGH COOL with the temp at 1 or 2.

Normal Operating Sounds

■ You may hear a pinging noise caused by water being picked up and thrown against the condenser on rainy days or when the humidity is high. This design feature helps remove moisture and improve efficiency.
■ You may hear the thermostat click when the compressor cycles on and off.

■ Water will collect in the base pan during high humidity or on rainy days. The water may overflow and drip from the outdoor side of the unit.
■ The fan may run even when the compressor is not.

Air Conditioner Warranty

All warranty service provided by our Factory Service Centers, or an authorized Customer Care® technician. For service, call 800-GE-CARES.

For The Period Of: GE Will Replace:

One Year Any partFrom the date of the original purchase	of the air conditioner which fails due to a defect in materials or workmanship.During thisfull one-year warranty, GE will also provide,free of charge, all labor and in-home service to replace the defective part.
Five Years Any part of the From the date of the original purchase	sealed refrigerating system(the compressor, condenser, evaporator and all connecting tubing) which fails due to a defect in materials or workmanship.During thisfive-year warranty, GE will also provide,free of charge, all labor and in-home service to replace the defective part.

What GE Will Not Cover:

■ Service trips to your home to teach you how to use the product.
■ Improper installation. If you have an installation problem, or if the air conditioner is of improper cooling capacity for the intended use, contact your dealer or installer. You are responsible for providing adequate electrical connecting facilities.
■ Failure of the product resulting from modifications to the product or due to unreasonable use including failure to provide reasonable and necessary maintenance.
■ In commercial locations labor necessary to move the unit to a location where it is accessible for service by an individual technician.

■ Replacement of house fuses or resetting of circuit breakers.
■ Failure due to corrosion on models not corrosion-protected.
■ Damage to the product caused by improper power supply voltage, accident, fire, floods or acts of God.
■ Incidental or consequential damage to personal property caused by possible defects with this air conditioner.

This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. In Alaska, the warranty excludes the cost of shipping or service calls to your home.

Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state's Attorney General.

Warrantor: General Electric Company. Louisville, KY 40225

Service Telephone Numbers.

GE Answer Center ^® 800.626.2000

The GE Answer Center ^® is open 24 hours a day, 7 days a week.

In-Home Repair Service 800-GE-CARES (800-432-2737)

Expert GE repair service is only a phone call away.

Special Needs Service 800.626.2000

800-TDD-GEAC (800-833-4322)

GE offers, free of charge, a brochure to assist in planning a barrier-free kitchen for persons with limited mobility.

Service Contracts 800-626-2224

Purchase a GE service contract while your warranty is still in effect and you'll receive a substantial discount. GE Consumer Service will still be there after your warranty expires.

Parts and Accessories 800-626-2002

Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes (VISA, MasterCard and Discover cards are accepted).

Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

Service Satisfaction

If you are not satisfied with the service you receive from GE:

First, contact the people who serviced your appliance.

Next, if you are still not pleased, write all the details—including your phone number—to:

Manager, Customer Relations

GE Appliances

Appliance Park

Louisville, KY 40225

Finally, if your problem is still not resolved, write:

Major Appliance Consumer Action Program

20 North Wacker Drive

Chicago, IL 60606