Pico VCO2 - Master Keyboard Erica Synths - Free user manual and instructions

Product Type	Eurorack Analogue VCO Module
Brand	Erica Synths
Model	Pico VCO2
Width	3 HP
Depth	35 mm
Weight	Approx. 40 g
Power Consumption	+21 mA, -19 mA
Output Signal Amplitude	-5 V to +5 V
PWM CV Input Range	-5 V to +5 V
1V/Octave Tracking	Over 8 octaves
Waveform Outputs	Triangle and Pulse
Manual Controls	Tune and PWM knobs
Octave Switch	±1 octave, 3-position
Protection Features	Overvoltage input protection, reverse PSU connection protection
Operating Temperature Range	-20°C to +50°C
Environmental Compliance	RoHS compliant, no lead, mercury, cadmium, chrome
Disposal	Special waste - do not dispose in household waste
Warranty	See www.ericasynths.lv for terms
Intended Use	Indoor use only, not for humid or wet environments

Frequently Asked Questions - Pico VCO2 Erica Synths

What is the Pico VCO2?

The Erica Synths Pico VCO2 is a fully analogue voltage-controlled oscillator (VCO) in a 3HP Eurorack module, offering triangle and pulse waveform outputs with manual tune and PWM controls.

What are the power requirements?

The module consumes +21 mA and -19 mA from the Eurorack power supply. It has reverse PSU protection.

How do I connect the 1V/octave input?

Connect a sequence or other CV source to the 1V/oct input. The module tracks accurately over 8 octaves.

What is the purpose of the PWM CV input?

The PWM CV input accepts -5V to +5V modulation to control the pulse width. Experiment with LFOs, envelopes, or random sources for rhythmic or evolving sounds.

How do I adjust the pitch?

Use the Tune knob for manual coarse tuning. The ±1 octave switch transposes the pitch up or down by one octave.

What waveforms does it output?

It outputs triangle and pulse waveforms simultaneously. The triangle is gentle, while the pulse wave can be modified with PMW.

Can I use this module in a humid environment?

No, the module is not waterproof and should not be exposed to moisture. If liquids enter, disconnect immediately and consult a technician.

What should I do if the module gets very cold?

If transported in extreme cold (< -20°C), let it acclimate to room temperature for at least one hour before powering on.

How should I clean the module?

Use a dry, soft cloth. Avoid any liquids or cleaning agents. Ensure the module is disconnected from power before cleaning.

Where can I find the warranty terms?

Warranty details are available at www.ericasynths.lv. The module must be returned in original packaging for warranty claims.

USER MANUAL Pico VCO2 Erica Synths

WITH PICO SERIES WE CHALLENGED OURSELVES – CAN WE MAKE ANY SUPERIOR FUNCTIONALITY SYNTH MODULE 3HP WIDE AND AFFORDABLE? YES, WE CAN.

WHEN WE DECIDED TO EXPAND THE PICO SERIES, WE REALIZED, WE NEED MORE ANALOGUE DESIGNS. THEREFORE WE GIVE YOU

ERICA SYNTHS PICO VCO2 – POWERFUL, FULL ANALOGUE VCO WITH GREAT TRACKING OVER 8 OCTAVES JUST IN 3HP! COMBINE TWO OF THOSE, ADD SOME PWM AND HAVE A SOUND OF REAL ANALOGUE BEAST!

MANUAL TUNE AND PWM CONTROLS

+-1 OCTAVE SWITCH

1V/OCT INPUT WITH GOOD TRACKING ACROSS 8 OCTAVES

PWM CV INPUT

PULSE AND TRIANGLE WAVEFORM OUTPUTS

INPUT PROTECTION AGAINST OVERVOLTAGE

PROTECTION AGAINST REVERSE PSU CONNECTION

OUTPUT SIGNAL AMPLITUDE -5V - +5V

PWM CV INPUT (FULL SPAN) -5V - +5V

POWER CONSUMPTION +21MA, -19MA

MODULE WIDTH 3HP

MODULE DEPTH 35MM

pico

VCO2

ADJUST THE TUNE OF THE VCO MANUALLY! 1V/OCT CV IS ADDED TO THE SETTING OF THIS KNOB

THREE POSITION SWITCH ALLOW YOU TO TRANSPOSE THE PITCH OF THE VCO ONE OCTAVE UP OR DOWN

THIS IS PWM CV INPUT. EXPERIMENT WITH DIFFERENT MODULATION SOURCES TO GET DRONES, RHYTHMIC PATTERNS AND FAT ANALOGUE SOUND

THIS IS GENTLE SOUNDING TRIANGLE WAVE OUTPUT

ADJUST PULSE WIDTH MANUALLY! PWM CV IS ADDED TO THE SETTING OF THIS KNOB

PATCH THE SEQUENCER OR ANY FM SOURCE HERE

THIS IS PULSE WAVE OUTPUT

PLEASE FOLLOW THE INSTRUCTIONS FOR USE OF THE ERICA SYNTHS MODULE BELOW, 'CAUSE ONLY THIS WILL GUARANTEE PROPER OPERATION OF THE MODULE AND ENSURE WARRANTY FROM ERICA SYNTHS.

WATER IS LETHAL FOR MOST OF THE ELECTRIC DEVICES, UNLESS THEY ARE MADE WATERPROOF. THIS ERICA SYNTHS MODULE IS NOT INTENDED FOR USE IN A HUMID OR WET ENVIRONMENT. NO LIQUIDS OR OTHER CONDUCTING SUBSTANCES MUST GET INTO THE MODULE. SHOULD THIS HAPPEN, THE MODULE SHOULD BE DISCONNECTED FROM MAINS POWER IMMEDIATELY, DRIED, EXAMINED AND CLEANED BY A QUALIFIED TECHNICIAN.

DO NOT EXPOSE THE MODULE TO TEMPERATURES ABOVE +50°C OR BELOW -20°C. IF YOU HAVE TRANSPORTED MODULE IN EXTREME LOW TEMPERATURES, LEAVE IT IN ROOM TEMPERATURE FOR AN HOUR BEFORE PLUGGING IT IN

TRANSPORT THE INSTRUMENT CAREFULLY, NEVER LET IT DROP OR FALL OVER. WARRANTY DOES NOT APPLY TO MODULES WITH VISUAL DAMAGES.

THE MODULE HAS TO BE SHIPPED IN THE ORIGINAL PACKAGING ONLY. ANY MODULE SHIPPED TO US FOR RETURN, EXCHANGE AND/OR WARRANTY REPAIR HAS TO BE IN ITS ORIGINAL PACKAGING. ALL OTHER DELIVERIES WILL BE REJECTED AND RETURNED TO YOU. MAKE SURE YOU KEEP THE ORIGINAL PACKAGING AND TECHNICAL DOCUMENTATION.

THIS DEVICE COMPLIES TO THE EU GUIDELINES AND IS MANUFACTURED RoHS CONFORMING WITHOUT USE OF LED, MERCURY, CADMIUM AND CHROME. NEVERTHELESS, THIS DEVICE IS SPECIAL WASTE AND DISPOSAL IN HOUSEHOLD WASTE IS NOT RECOMMENDED.

Erica Synths

You will find Erica Synths terms of warranty at www.ericasynths.lv. Items for return, exchange and/or warranty repair have to be sent to:

Erica Synths

Andrejostas Str. 43

Riga

Latvia

LV-1045

User manual by Girts Ozolins@Erica Synths

Design by Ineta Briede@Black8

Copying, distribution or any commercial use in any way is prohibited and needs the written permission by Erica Synths. Specifications are subject to change without notice.

In case of any questions, feel free to contact us through www.ericasynths.lv or via e-mail

[e-mail]