LSN6DR3S - Air-conditioner LG - Free user manual and instructions
Find the device manual for free LSN6DR3S LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Model | LSN6DR3S |
| Indoor Unit Dimensions (W x H x D) | 800 x 285 x 210 mm |
| Outdoor Unit Dimensions (W x H x D) | 660 x 420 x 250 mm |
| Indoor Unit Weight | 8.5 kg |
| Outdoor Unit Weight | 22.0 kg |
| Power Supply | 220-240 V, 50 Hz |
| Cooling Capacity | 2.6 kW (approx. 9000 BTU/h) |
| Compressor Type | Inverter (variable speed) |
| Refrigerant | R32 |
| Operating Modes | Cool, Fan, Dry |
| Airflow Direction | Auto swing (vertical/horizontal) |
| Fan Speeds | Low, Medium, High, Auto |
| Timer | On/Off timer up to 24 hours |
| Sleep Mode | Yes |
| Self Diagnosis | LED error code display |
| Air Filter | Washable antibacterial filter |
| Noise Level (Indoor) | 30 dB(A) (low speed) |
| Energy Efficiency | Up to 11.0 EER |
| Installation | Wall-mounted, requires professional installation |
Frequently Asked Questions - LSN6DR3S LG
How often should I clean the air filter?
Clean the air filter every 2 weeks during regular use. A dirty filter reduces cooling efficiency and can cause the unit to freeze.
How do I set the timer to turn off automatically?
Press the Timer button on the remote control until the clock icon flashes. Use the +/- buttons to set the desired off time (1-24 hours). Press Timer again to confirm.
What does the 'Error Code' mean on the display?
Common error codes include E1 (indoor fan problem), E2 (outdoor unit fault), and E3 (refrigerant leak). Refer to the manual for full list and troubleshooting.
Can I use the air conditioner without the remote?
Yes, you can operate the unit using the Manual On/Off button located behind the front panel. This will run the AC in Auto mode at 24°C.
Why is my air conditioner not cooling properly?
Check if the air filter is dirty, if the set temperature is lower than room temperature, and if the outdoor unit is obstructed. Also ensure the unit is in Cool mode, not Fan mode.
What is the recommended room size for this unit?
This 2.6 kW (9000 BTU/h) unit is suitable for rooms up to approximately 25 square meters (270 sq ft) with standard ceiling height.
How do I activate Sleep Mode?
Press the Sleep button on the remote. The unit will gradually increase temperature by 2°C over the next hour to save energy and prevent overcooling.
What type of refrigerant does this AC use?
This model uses R32 refrigerant, which has lower global warming potential than R410A. It is factory-sealed and should only be serviced by a certified technician.
Can I install the unit myself?
Do not attempt self-installation. Proper installation requires vacuuming the lines, electrical wiring, and mounting. Always hire a qualified professional to ensure warranty validity.
How do I clean the indoor unit's condensate drain?
If water leaks from the indoor unit, the drain may be clogged. Turn off the unit and gently clean the drain pan and drain hole with a soft brush or vacuum. For deep clogs, contact a technician.
User questions about LSN6DR3S LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual LSN6DR3S - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LSN6DR3S by LG.