SN278I46TM - Dishwasher SIEMENS - Free user manual and instructions
Find the device manual for free SN278I46TM SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Width | 60 cm |
| Height | 84.5 cm |
| Depth | 60 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A+++ |
| Annual Energy Consumption | 262 kWh |
| Water Consumption per Cycle | 9.5 L |
| Noise Level | 48 dB(A) re 1 pW |
| Number of Place Settings | 14 |
| Programs | Eco 50°C, Auto 45-65°C, Intensive 70°C, Quick 45°C, Pre-Rinse |
| Drying Method | Zeolith drying |
| Water Protection System | AquaStop |
| Delay Start | 1-24 hours |
| Rinse Aid Indicator | Yes |
| Salt refill indicator | Yes |
| Self-cleaning filter | Yes |
| Interior Lighting | LED |
| Repairability Index | 8.0/10 |
| Spare Parts Availability | 7 years |
Frequently Asked Questions - SN278I46TM SIEMENS
How do I start a wash cycle on the SN278I46TM?
Press the On/Off button, select the desired program using the program selector, and then press the Start button. The appliance will begin after a short delay.
What does the AquaStop system do?
AquaStop is a safety feature that prevents water damage. It includes a double-walled hose and a safety valve that shuts off water immediately if a leak is detected.
How often should I clean the filter?
It is recommended to clean the filter every month or after every 10-15 cycles. Remove the lower spray arm and filter assembly, rinse under running water, and replace.
Can I use regular dish soap instead of dishwasher detergent?
No, only use dishwasher detergent specially formulated for automatic dishwashers. Regular dish soap creates excessive foam and may damage the appliance.
What does the E:15 error code indicate?
Error E:15 indicates a water leak. Turn off the water supply, unplug the dishwasher, and check for leaks under the appliance. Contact a technician if necessary.
How can I reduce energy consumption?
Use the Eco 50°C program, run full loads, and scrape off food scraps instead of rinsing. Also, use the delay start to run during off-peak hours.
Is the dishwaser compatible with salt and rinse aid?
Yes, it requires both dishwasher salt for the water softener and rinse aid for drying. Refill when the indicators on the control panel light up.
How do I adjust the water hardness setting?
Refer to the manual: Press and hold the Program button for 3 seconds, then use the + or - buttons to set the hardness level from H:00 (soft) to H:07 (hard). Confirm with the Start button.
What is the recommended maintenance for the spray arms?
Remove the spray arms every 3-6 months and clean the nozzles with a toothpick or soft brush. Soak in vinegar water if clogged with limescale.
How long does the Quick 45°C program take?
The Quick 45°C program takes approximately 30-45 minutes depending on the load and water temperature. It is suitable for lightly soiled dishes.
User questions about SN278I46TM SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SN278I46TM - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SN278I46TM by SIEMENS.