CRS-AOCH/COLOR-295 - Computer Accessories and Peripherals Kramer - Free user manual and instructions

Product Type	Fiber Optic HDMI Cable
Model	CRS-AOCH/COLOR-295 (295 ft / 90 m)
Connector Type	Male HDMI Type A (color-coded: green source, red display)
Cable Length	295 ft (90 m)
Video Resolution	Up to 4K@30Hz, 1080p Full HD Deep Color 48-bit, 3D
Audio Support	PCM 8ch, Dolby Digital True HD, DTS-HD Master Audio
HDMI Compliance	HDCP 2.2, EDID, CEC
Pixel Clock Rate	300 MHz
DDC Signal Input	5.0 V
Cable Structure	Hybrid Optical Fiber (4 optical fibers + 6 AWG 28 wires)
Cable Jacket Material	TPU (Thermoplastic Polyurethane)
Cable Diameter	4.5 mm
Connector Dimensions (WxDxH)	7.07 x 1.96 x 1.12 cm (2.78 x 0.8 x 0.44 in)
Bending Radius	90 mm (minimum)
Pulling Strength	500 N (50 kg, 110 lbs)
Compression Load Resistance	500 N (50 kg, 110 lbs)
Power Supply	From HDMI pin #18 (source device draws 5V DC)
Power Consumption	0.25 W
Operating Temperature	0° to 50°C (32° to 122°F)
Storage Temperature	-30° to 70°C (-22° to 158°F)
Operating Humidity	5% to 85% RHL non-condensing
Installation Method	Plug and Play; no external power required
Safety Precautions	Disconnect power before servicing; do not disassemble or modify connector heads
Maintenance	Clean connectors with a dry cloth; avoid sharp bends and twisting

Frequently Asked Questions - CRS-AOCH/COLOR-295 Kramer

What is the maximum resolution supported by the CRS-AOCH/COLOR-295?

The cable supports resolutions up to 4K@30Hz, as well as Full HD 1080p Deep Color 48-bit and 3D.

Does the cable require an external power source?

No, the cable draws power directly from the source device via HDMI pin #18 (5V DC). Power consumption is only 0.25W.

What is the length of this specific model (CRS-AOCH/COLOR-295)?

This model is 295 feet (90 meters) long. Other lengths from 33 ft (10 m) to 328 ft (100 m) are available.

Is the cable compatible with HDCP 2.2?

Yes, the cable is HDCP 2.2 compliant and also supports EDID and CEC.

Can the cable be installed in-wall or in conduit?

Yes, but care must be taken to avoid exceeding the bending radius of 90 mm and pulling strength of 500N (50 kg). Use proper installation practices to prevent damage.

How do I identify which end connects to the source and which to the display?

The cable is color-coded: the green connector is for the source (e.g., DVD player, PC) and the red connector is for the display (e.g., TV, projector). Do not reverse them.

What is the maximum pulling strength for the cable?

The maximum pulling/tensile strength is 500N (50 kg, 110 lbs). Exceeding this may damage the optical fibers.

Can I connect the source end to the display device?

No, the green connector must only be plugged into the source, and the red connector into the display. Reversing may cause damage to the cable or devices.

How should I clean the HDMI connectors?

Use a dry, soft cloth to clean the connectors gently. Avoid touching the metal contacts. Do not use liquids or abrasive materials.

Is the cable repairable if damaged?

The cable is not user-serviceable. Do not attempt to disassemble or modify the connector heads. If damaged, the entire cable should be replaced.

USER MANUAL CRS-AOCH/COLOR-295 Kramer

Installation Instructions

MODEL:

CRS-AOCH/COLOR

Fiber Opc HDMI Cable

P/N:

Rev:

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

www.kramerAV.com

[e-mail]

CRS-AOCH/COLOR Fiber Optic High Speed Pluggable HDMI Cable

Congratulations on purchasing your Kramer CRS-AOCH/COLOR Plug and Play active Fiber Optic High Speed Pluggable HDMI Cable. The CRS-AOCH/COLOR provides an extremely high quality signal over a wide range of resolutions, up to 4K@30Hz. This cable is available in various lengths from 33ft (10m) up to 328ft (100m).

Features

The CRS-AOCH/COLOR:

• Supports a wide range of resolutions up to 4K@30Hz Full HD, 3D, Deep Color
• Supports Multi-channel audio, Dolby True HD, DTS-HD Master Audio
• Is HDMI compliant: EDID, CEC, HDCP
- Inherently provides protection from electromagnetic interference (EMI) and radio frequency interference (RFI)
- Has built-in powering with low power consumption
- Has high pulling strength

Cable Dimensions

The CRS-AOCH/COLOR includes four optical fibers and six AWG 28 wires with compact size HDMI connectors. The cable has a SOURCE green colored end to which the source is connected (for example, a DVD, Blu-ray or game console box) and a DISPLAY red colored end to which the acceptor is connected (for example, a projector, an LCD display or a tablet device), see Figure 1.

Figure 1: HDMI Connectors – SOURCE and DISPLAY (with Dimensions)

CRS-AOCH/COLOR Plug and Play Installation

Before installing the cable, make sure that you have an HDMI graphic card or devices with an HDMI port (for example, a PC, laptop, DVD/Blue-ray player or any other video/audio signal source devices).

Kramer CRS-AOCH/COLOR Fiber Optic HDMI cables are designed to take +5V DC power from the source devices to the HDMI pin #18 of the SOURCE

side connector on the cable.

Optical fiber cable is not robust physically compared to conventional copper cable materials. Even if this cable is designed to be seamlessly resistant at certain levels of artificial strengths to the cable, CRS-AOCH/COLOR can be damaged if it is excessively pinched, twisted or kinked when being installed and after being installed. Be careful not to bend or twist the cable tightly.

When CRS-AOCH/COLOR is installed into the conduit, the fiber pulling strength and the bending radius are the key conditions to safe installation of the cable:

Maximum fiber bending radius: 90mm

Maximum fiber pulling/tensile strength: 50kg (500N)

Crush Resistance: 50kg (500N)

Do not disassemble or modify the products, especially the HDMI connector head parts. Do not remove the dust plug before the cable laying process is completed. HDMI connector heads are very critical parts. Remove the head at the last moment just before the connector is plugged into the source or the display devices after the installation is complete.

To install the CRS-AOCH/COLOR:

1. Unpack the cable from the package with care and remove the cable tie. We recommend that you save the original box and packaging materials for possible future shipment.
2. Install the cable (for example, an in-wall or conduit installation or under-floor installations).
3. Once the cable installation is complete, remove the dust cap and plug the SOURCE green connector head of the cable into the source devices.

Do not plug the SOURCE green connector to the display device.

1. Remove the dust cap and plug the DISPLAY red connector head of the cable into the display devices.

Do not plug the DISPLAY red connector to the source device.

1. Switch on the power of source and display devices.

Troubleshooting

If you have encountered a problem, check that:

• The source and display devices are both switched on
• Both HDMI connector heads are fully plugged into the devices
• The cable or its jacket is not physically damaged
  • The cable is not bent or kinked

Specifications

Audio and Power
Video Resolution:	Up to 4K@30Hz; 1080p Full HD Deep Color 48bit, 3D
Embedded Audio Support:	PCM 8ch, Dolby Digital True HD, DTS-HD Master Audio
HDMI Compliance:	HDCP 2.2, EDID, CEC
Pixel Clock Rate:	300MHz
DDC Signal Input:	5.0V
Cable Assembly
HDMI Connector:	Male HDMI Type A Connector
HDMI Connector Dimensions:	7.07cm x 1.96cm x 1.12cm (2.78" x 0.8" x 0.44") W, D, H
Cable Structure:	Hybrid Optical Fiber Cable
Cable Jacket Material:	TPU (Thermoplastic Polyurethane)
Cable Diameter:	4.5mm
Cable Bending Radius:	90mm
Max. Pulling strength:	500N (50kg, 110lbs)
Max. Compression load resistance:	500N (50kg, 110lbs)
Power
Power Supply HDMI:	PIN # 18 (draws current from the source)
Power Consumption:	0.25W
General
Operating Temperature:	0° to +50°C (32° to 122°F)
Storage Temperature:	-30° to +70°C (-22° to 158°F)
Operating Humidity:	5% to 85%, RHL non-condensing
Available Size:	33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft (40m), 164ft (50m), 197ft (60 ft) 230ft (70m), 262ft (80m), 295ft (90m) and 328ft (100m)
Weight:	Weight changes per length