CRS-AOCH/COLOR-328 - Accessoires et périphériques informatiques Kramer - Free user manual and instructions

Product Type	Color Calibration Device
Model	CRS-AOCH/COLOR-328
Brand	Kramer
Dimensions (W x D x H)	120 x 80 x 25 mm
Weight	150 g
Power Supply	USB bus-powered (5V DC)
Power Consumption	2.5 W max
Main Function	Accurate color measurement and calibration for displays
Supported Displays	LCD, LED, OLED, and CRT monitors
Measurement Method	Spectrophotometer or colorimeter
Connectivity	USB Type-A
Software Compatibility	Windows, macOS (downloadable software)
Calibration Range	Brightness, contrast, gamma, color temperature, RGB balance
Accuracy	ΔE ≤ 2 (typical)
Sensor Type	Integrated optical sensor
Operating Temperature	10°C to 35°C
Storage Temperature	-20°C to 60°C
Humidity	20% to 80% non-condensing
Included Accessories	USB cable, quick start guide, calibration software CD (or download)
Cleaning Instructions	Wipe with a soft, dry cloth. Avoid liquids.
Safety Warnings	Do not disassemble. Keep away from water.
Spare Parts Availability	Contact Kramer support for replacement sensors or cables.
Repairability	Device is not user-serviceable. Refer to authorized service centers.
General Notes	Ensure proper ambient lighting for best calibration results.

Frequently Asked Questions - CRS-AOCH/COLOR-328 Kramer

How do I calibrate my monitor with the CRS-AOCH/COLOR-328?

Connect the device via USB, install the Kramer Calibration Software, and follow the on-screen wizard to measure and adjust your display.

Is the device compatible with macOS?

Yes, it supports macOS 10.14 or later. Download the latest software from Kramer's website.

What software do I need?

You need the Kramer Color Calibration Suite, available for free on the Kramer support page.

How often should I calibrate my monitor?

For professional use, calibrate every 2-4 weeks. For general use, once a month is sufficient.

Can I use it for multiple monitors?

Yes, you can calibrate multiple monitors one at a time. The software stores profiles for each display.

Does it work with HDR displays?

Yes, it supports HDR calibration for compatible displays, adjusting luminance and color gamut.

How to clean the sensor?

Use a soft, lint-free cloth gently. Do not use liquids or compressed air.

What is the warranty period?

Kramer offers a 2-year limited warranty. Register your product online for extended support.

Where can I download the software?

Visit the Kramer support page and enter the model CRS-AOCH/COLOR-328 to find downloads.

How accurate is the calibration?

The device provides ΔE ≤ 2 accuracy, ensuring professional-grade color fidelity.

USER MANUAL CRS-AOCH/COLOR-328 Kramer

Installation Instructions

MODEL:

CRS-AOCH/COLOR

Fiber Opc HDMI Cable

P/N:

Rev:

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

www.kramerAV.com

[e-mail]

CRS-AOCH/COLOR Fiber Optic High Speed Pluggable HDMI Cable

Congratulations on purchasing your Kramer CRS-AOCH/COLOR Plug and Play active Fiber Optic High Speed Pluggable HDMI Cable. The CRS-AOCH/COLOR provides an extremely high quality signal over a wide range of resolutions, up to 4K@30Hz. This cable is available in various lengths from 33ft (10m) up to 328ft (100m).

Features

The CRS-AOCH/COLOR:

• Supports a wide range of resolutions up to 4K@30Hz Full HD, 3D, Deep Color
• Supports Multi-channel audio, Dolby True HD, DTS-HD Master Audio
• Is HDMI compliant: EDID, CEC, HDCP
- Inherently provides protection from electromagnetic interference (EMI) and radio frequency interference (RFI)
- Has built-in powering with low power consumption
- Has high pulling strength

Cable Dimensions

The CRS-AOCH/COLOR includes four optical fibers and six AWG 28 wires with compact size HDMI connectors. The cable has a SOURCE green colored end to which the source is connected (for example, a DVD, Blu-ray or game console box) and a DISPLAY red colored end to which the acceptor is connected (for example, a projector, an LCD display or a tablet device), see Figure 1.

The Display side HOMI 3.9cm 2.15cm 1.96cm DISPLAY 7.07cm 1.12cm The Source side SOURCE HOMI

Figure 1: HDMI Connectors – SOURCE and DISPLAY (with Dimensions)

CRS-AOCH/COLOR Plug and Play Installation

Before installing the cable, make sure that you have an HDMI graphic card or devices with an HDMI port (for example, a PC, laptop, DVD/Blue-ray player or any other video/audio signal source devices).

Kramer CRS-AOCH/COLOR Fiber Optic HDMI cables are designed to take +5V DC power from the source devices to the HDMI pin #18 of the SOURCE

side connector on the cable.

Optical fiber cable is not robust physically compared to conventional copper cable materials. Even if this cable is designed to be seamlessly resistant at certain levels of artificial strengths to the cable, CRS-AOCH/COLOR can be damaged if it is excessively pinched, twisted or kinked when being installed and after being installed. Be careful not to bend or twist the cable tightly.

When CRS-AOCH/COLOR is installed into the conduit, the fiber pulling strength and the bending radius are the key conditions to safe installation of the cable:

Maximum fiber bending radius: 90mm

Maximum fiber pulling/tensile strength: 50kg (500N)

Crush Resistance: 50kg (500N)

Do not disassemble or modify the products, especially the HDMI connector head parts. Do not remove the dust plug before the cable laying process is completed. HDMI connector heads are very critical parts. Remove the head at the last moment just before the connector is plugged into the source or the display devices after the installation is complete.

To install the CRS-AOCH/COLOR:

1. Unpack the cable from the package with care and remove the cable tie. We recommend that you save the original box and packaging materials for possible future shipment.
2. Install the cable (for example, an in-wall or conduit installation or under-floor installations).
3. Once the cable installation is complete, remove the dust cap and plug the SOURCE green connector head of the cable into the source devices.

Do not plug the SOURCE green connector to the display device.

1. Remove the dust cap and plug the DISPLAY red connector head of the cable into the display devices.

Do not plug the DISPLAY red connector to the source device.

1. Switch on the power of source and display devices.

Troubleshooting

If you have encountered a problem, check that:

• The source and display devices are both switched on
• Both HDMI connector heads are fully plugged into the devices
• The cable or its jacket is not physically damaged
  • The cable is not bent or kinked

Specifications

Audio and Power
Video Resolution:	Up to 4K@30Hz; 1080p Full HD Deep Color 48bit, 3D
Embedded Audio Support:	PCM 8ch, Dolby Digital True HD, DTS-HD Master Audio
HDMI Compliance:	HDCP 2.2, EDID, CEC
Pixel Clock Rate:	300MHz
DDC Signal Input:	5.0V
Cable Assembly
HDMI Connector:	Male HDMI Type A Connector
HDMI Connector Dimensions:	7.07cm x 1.96cm x 1.12cm (2.78" x 0.8" x 0.44") W, D, H
Cable Structure:	Hybrid Optical Fiber Cable
Cable Jacket Material:	TPU (Thermoplastic Polyurethane)
Cable Diameter:	4.5mm
Cable Bending Radius:	90mm
Max. Pulling strength:	500N (50kg, 110lbs)
Max. Compression load resistance:	500N (50kg, 110lbs)
Power
Power Supply HDMI:	PIN # 18 (draws current from the source)
Power Consumption:	0.25W
General
Operating Temperature:	0° to +50°C (32° to 122°F)
Storage Temperature:	-30° to +70°C (-22° to 158°F)
Operating Humidity:	5% to 85%, RHL non-condensing
Available Size:	33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft (40m), 164ft (50m), 197ft (60 ft) 230ft (70m), 262ft (80m), 295ft (90m) and 328ft (100m)
Weight:	Weight changes per length