WFM3000PB - Freezer WESTINGHOUSE - Free user manual and instructions

USER MANUAL WFM3000PB WESTINGHOUSE

Top Mount, Bottom Mount,

Bottom Mount Ice and Water

and Single Door models

Black-and-white photo of two glasses filled with ice and mint leaves, with blurred background of other items (no text or symbols visible)

CONGRATULATIONS

Congratulations and thank you for choosing our refrigerator/freezer. We are sure you will find your new appliance a pleasure to use. Before you use the appliance, we recommend that you need through the relevant sections of this manual, which provides a description of your appliance and its functions.

To avoid the risks that are always present when you use an electric appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse one hazard.

We recommend that you keep this instruction booklet for future reference and pass it or to any future owners.

After unpacking the appliance, please check it is not damaged. It in doubt, do not use the appliance but contact your local customer care centre

The symbols you will see in this booklet have these meanings.

This symbol indicates information concerning your personal safety.

This symbol indicates information on how to avoid damaging the refrigerator.

This symbol indicates tips and information about use of the refrigerator.

This symbol indicates tips and information about economical and ecological use of the regulatory

CONDITIONS OF USE

This application is designed and intended to be used in normal domestic applications only.

Record mode and serial number here:

Model

Serial No:

CONTENTS

Inspector safety instructors 3

100 mount refrigerator features 2

Domom mount refrigerator features . . . . . . . 5

Beom matalize & water refrigerator features 6

Single door of refrigerator lectures

Single door at freezer lectures 0

Installing your new appliance.

vermittlen a core your appraise.

Initial setup 10

Ice and water installation ..... 11

Electronic display controls - ice & water models 15

Core and maintenance 23

Changing the light bulb . . . . . . . . . . . . . 23

General information 2/

Cloning the appliance.

Switching off your appliance 24

12301600-78

Ice & water can be too long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Warranty, 27

IMPORTANT SAFETY INSTRUCTIONS

Please read the user manual carefully and sells in a handy piece to later reference. For the user manual on its new owners of the refrigerator.

Important - check for any damages or marks

If your mind the 'ringelsor' is damaged or injured, you must report it within 7 days if you wish to claim or damage/marks under the manufacturers warranty. This does not affect your voluntary rights.

Information on disposal for users

- Most of the packing materials are recyclable. Please dispose of those materials through your lack of recycling depot or by packing them in appropriate collection containers.

- If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

- When you dispose of your old refrigerator and heaters, remove any doors. Children can succede if they get improved inside.

- This appliance is not intended for use by session (including children), with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

- Don't use a steam cleaner. Five components come in contact with condensing steam, they may short-circuit or coarse air electric shock

- Do not use mechanical devices or other means to achieve the defrosting process other than those recommended by the manufacture.

- This appliance contains insulation formed with flammable blowing gasket. Avoid safety hazards by carefully disposing of his appliance.

- If pressurized across containers near the word "kannicole" and/or a small flame symbol, do not store them inside any fire generator or fire/er. If you do so you may cause an explosion.

• The refrigerator must be plugged into its own dedicated 220.240V, 50Hz AC electrical outlets.

- The plug must be accessible when the refrigerator is in position.

- It is essential: the power point is properly paired to

- Don't use extension cords or adapter plugs with this refrigerator.

- If the power cord is damaged, it must be restored by the manufacturer, its service agent or publicly qualified persons in order to avoid a hazard.

- Do not store explosive substances such as aerosol cons with a flammable propellant in this compliance.

• Do not damage the refrigerator circuit.

- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

- Urolog the refrigerator before cleaning it, or changing the light bulb to avoid electric shock

- Never unplug the refrigerator by pulling the electric bolt as this way damage it. Grip the plug family and pull straight out.

- Choose a location for your refrigerator that isn't too cold. The ambient room temperature should be above 10°C.

- Stand your refrigerator in dry place - mixed areas of high moisture or humidity.

- Don't put the refrigerator in frosty or unprotected areas like a garage or on the veranoch.

- Keep the religes: natural or direct sunlight.

- Don't choose the refrigerated rent stover, lines or heaters. - Wings installed correctly, you're also sure about

- Have adequate space at the back and sides for air circulation (refer to page 10).

- Be aligned to the unaiming cupbande love doors that will set close from a partially oper position

For Ice & Water models only

- Check for water leaks at all water connection points in the first two or three hours after installation. Re-check after 24 hours to ensure connection is waterlight. If the connection is leaking, can contact a licensed plumber.

- Do not use with water that is microdiologically unsafe or with water of unknown quality without adequate disinfection.

- Never can fire the appliance to a hot water supply - Never install the water heater in an area of the wall where there may be clamped, water and/or water waste clean

■ Never install the water filter in an area of direct sunlight.

R600a refrigerant warning

This appliance contains a small quantity of lignmable ROSCo refrigerator. Avoid soley hazards by carefully involving, handling, servicing and disposing at the appliance.

- Ensure that the tubing of the religerant circuit is not damaged using transportation and installation.

- Leasing refrigerant may house eye injuries or girdles. - The room for installing opolance must be at least 1 m³ per 8g of refrigerant. The amount of refrigerant in the appliance can be found on the rating plate inside the opolance.

- If you are unsure of the refrigerator check the rating plate inside the refrigerator compartment

- It is hazardous for anyone other than an Authorised Service Person to service this compliance. In Queensland Australia the Authorisation Service Person MUST hold a Gas Work Authorization for hydrocarbon refrigerants to carry out servicing or repairs which involve the removal of covers.

- Keep ventilation openings in the appliance enclosure or in the built-in structure, clear of obstruction

TOP MOUNT (TM) REFRIGERATOR FEATURES

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 WTP-5/2024 (the next-1) Electronic controls Manual controls

1 Freeze light (weselined)
2. General delivery tests
3 Glass freezer shelf
4. (with & serve ice cube tray)
cdbr
5. Fennzini and family
6 Par-kgamom Light
7 Manual temperature controls [were fitted, not illustrated]
8 electric temperature scales
(where 1=1, we didn't
8 Delbin
10 Adjustable glass shades
11 Boile/wire vck
12 -amidi, cortels
13 Crisper bins on telescopic
extension slices (where filled)
14 Adjusteriches
15 Heeey door bie
16 Two dairy companies
17 Strenseb™ bin (dorabie)
10 Utility driver
19. You know
20. Adjustable non-bias
21. Barts/con him
an "al" is a result
22. O'ELIXING
Features may vary depending on model. Not all models will have features listed.

BOTTOM MOUNT (BM) REFRIGERATOR FEATURES

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 VWR-5 HTRSC Installed Electronic controls Manual controls

1 Refrigerator light
2 Electric temperature control
(Where Ifted. Not Iluvated)
3 Manual temperature controls
(2) were fired. Nettus
4. Adjustable gross sleeves
5 Botta/wine rack
8 Humidity control
7 Cispe brs on leusopic
[Figure 1]
2. Freezer storage bay
9 Twist & Semi ice cube may
10. Ice socket and scoop inside
dresser, not illustrated:
11. 1997-03-20: 8:56:40
12 Adjustable rulers
13 Ten dairy companies
14 Storozafe™ bin (lockazole)
15 E.g. bay
16. Aduyabekos kurs
17. Bots/cambes
18. Smlivan for
features may vary depending on model. Nor all models will have features listed.

BOTTOM MOUNT (BM) ICE & WATER REFRIGERATOR FEATURES

Electronic controls VH-5.162.1000 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 LED light
2. E-branch temperature control
3. Adjustable gas steves
4. Folie/ouw 0173
5. Crismal derivatives
6. Cibera cias en telapoeia
extension slides
7 Freezer storage tray
8 ke-toler assembly
9. Freeportian or Elacopic
extension sides (where that)
10 Adjustable rollers
II Sebiling loci
12 Ser dairy company
13 Storesala™ (an [lockable])
14 egg tor
15 Adjustable door bins
16 Betts/can birs
(二)
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
Features may vary depending on model. For all models will have features listed.

SINGLE DOOR ALL REFRIGERATOR (AR) FEATURES

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 VWKM430032 illustrated

1 Refrigerator light
2 Temperature control
3 Adjustable glass shelves
8. Del bar
5. Bottle
6 | Highly agree
7 Cope brcnleuscope
Hetero-steril
3 Adjustable rollers
9 Twenty-day compartments
10 Storesale™ pin [sokobe]
11. Fig. 10
12 Adjusted door brs
13
14 Can aio
15 Stooling fact
features may vary depending on model. Not all modes will have features listed

SINGLE DOOR ALL FREEZER (AF) FEATURES

1 2 3 4 5 6 7 VWX3000A8 illustrated

1 temperature control
2 Light
3 Twist & Save on cube ray and bin
4 Adjustable glass shelves
5. Freezer links on telecends, extension slides
6 Adjustable rulers
7 Stabising loc
Features may vary depending on model. For all models will have features listed.

INSTALLING YOUR NEW APPLIANCE

Adequate ventilation around your refrigerator

The diagram below shows the recommended space to allow or ventilation of your refrigerator.

If you do not have a cupboard above the refrigerator with a rear gap of min. run 100 mm (Y), recommended clearance at the rear of the refrigerator are as follows All models except WBES160SC

If gap (Y) is not a min. nor 100mm, then gap (X) increases from 50mm to 90mm min.

Please note for model WBE5160SC

gap (Y) is not a mir over 100mm, then gap (Z) increases from 10mm to 45mm min.

When positions in a corner area, spacing of all door 350mm on the hinge side will be low the doors to open enough to enable the removal of oils and shelves. Note: For those models with telescopic extensions on slide-out bins, the clearance required increases from 350mm to 550mm for top mount and bottom mount models; and to 450mm for the all refrigerator model to allow full access to the bins' comments as well as pin removal.

2000 Recommended space 3000 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M18 M19 M20 M21 M22 M23 M24 M25 M26 M27 M28 M29 M30 M31 M32 M33 M34 M35 M36 M37 M38 M39 M40 M41 M42 M43 M44 M45 M46 M47 M48 M49 M50 M51 M52 M53 M54 M55 M56 M57 M58 M59 M60 M61 M62 M63 M64 M65 M66 M67 M68 M69 M70 M71 M72 M73 M74 M75 M76 M77 M78 M79 M80 M81 M82 M83 M84 M85 M86 M87 M88 M89 M90 M91 M92 M93 M94 M95 M96 M97 M98 M99 M100

NOTE

Does are designed to all proud of cabinetry (not flat). The clearances shown above are the recommended minimum clearances. The clearance at the roof must not exceed 75mm.

Installing your refrigerator

Your new refrigerator should arrive with the front adjustable rollers wound down, to tilt the top backwards by about 20mm front upright. This will allow your refrigerator door to self-close, providing a consistent closed seal.

20mm High equatorial heat flux Fixed corners

The stability too should also be wound fully up so it will not interfere with the operation of the roller issue diagram in Sep 3.

CAUTION

The 'ellers are designed for forward or backward movement only. They are not casters. Moving the refrigerator sideways any damage your floor and the roters.

2 The top of the refrigerator should be tilted back by 20mm (see diagram on left). This will allow the doors to sell close providing a condien door seal.
3. If the refrigerator isn't tilted back, you can colour the two front rollers by tuning the large, plastic roller nut (see diagram below). One run of the tire will till the refrigerator back approximately. Often, if you have difficulty tuning the roller nut, have someone till the refrigerator back, so you have a series access. Alternatively, you can access the rollers from the side, using a 10 screwdriver. [See diagram below].

1. Check the alignment of the right sensor to the surrounding capboards to see it is level. You can adjust the level with the roters as detailed in step 3.

1. If you find your refrigerator rocks from corner to corner, it means your floor is uneven. Find a piece of plastic or hardwood etc. and pack it finely under the roller.
2. On certain floor surfaces the refrigerator may roll forward during operation. Where provided a "Roller Stop" can be placed under the "rent rollers. F Roller Stop is required, pool customer service on 1300-253-640."

/ You may now need to fine tune the installation by repeating Steps 3, 4 and 5.

INSTALLING YOUR NEW APPLIANCE ICE AND WATER INSTALLATIONINITIAL START-UP

1. When you have the appliance in its first position, it needs to be stabilized. Wind the vicinity floor down to the floor until it just moves contact with the floor. It's the front of the appliance to take the weight off the stability foot, then turn a ½ inch further to ensure time contact with the floor. Whenever you need to move the appliance, he sure to wind the foot back up so that the appliance can roll freely and be sure to reset in when reinstalling.

500 x 40" stop box test w/o/20 mm from step:

1. Clean your refrigerator thoroughly following the instructions on page 24 and wipe off any dust that has accumulated during shipping

2. Plug your refrigerator straight into its own power point and never use it double adapter. If you need to roll the refrigerator to get to the plug, remember to raise the stability foot first.

Before you put any food in your refrigerator, it's recommended you leave it on for 2 or 3 hours to check it is running properly.

Congratulations! You have successfully installed your new refrigerator.

Refrigerator work by transferring heel from the face walls to the outside of. This operation moves the back and sides of the refrigerator (particularly at startup) feel worn - which is normal.

A cooling coil is located behind the rear wall of the freezer section (in top mount, bottom mount and freezer models) and behind the crisper in the refrigerator models. This coil cools and removes moisture from the air inside.

Avoid placing food against the air vents in the refrigerator, as it affects the efficient circulation. If the door is opened frequently, a light-hesting will occasionally occur on the freezer's interior. This is normal one will clear after a few days. If the freezer room is accidentally kept open, a heavy hot with coat the inside walls and should be removed.

Your new refrigerator uses a highwood compressor, along with other energy-efficient components, which may make unusual sounds. These sounds simply indicate your refrigerator is working how I should. They include:

• Compressor running noise.

• Air movement noise from the wall for making

• A gaspling round, similar to water boiling

- A popping noise, heard during automatic defrosting;

and

- A clicking noise, prior to compressor drag-up.

uthe details can be found on page 25.

i TIPS & INFORMATION

- For top mount refrigerators, (Where the freezer is on top of the fresh food compartment)

- Don't place food forward of the ribs on the freezer

last, as it will keep the door open.

air vents Air vent Diss

- For bottom mount refrigerators (where the freezer is below the fresh load compartment), single door refrigerator and single door vertical freezers.

sure all freezer drawers and shelves are pushed back completely to prevent them from keeping the door open.

WARNING

Correct to suitable water supply only.

The external water filter kit

An external water filter and connection kit has been supplied for use with your ice & Water refrigerator. The external filter design allows more space within the refrigerator and provides double the life of previous filters reducing the root of replacement.

The filter is designed to significantly reduce chlorine, taste, colour, heavy metals, turbidity, lead-insect and scale build up. The included plastic water tube allows quick connection to the filter and is designed for high humidity and kink resistance.

This filter is designed only to be used with a potable water supply. It should not be used on water that is micro-technically used or with water of unknown acidity. The filter should be replaced every 12 months. The service file or the filter may be reduced in water supplies that contain an excess of pellets or other impurities. Reduced flow rate is an indication that it is required, failure or replace the filter when required can affect the function of the ice maker. Service calls caused by a failure to replace the filter are not covered by warranty.

Contents of installation kit

1 × water filter with push it connectors

2 x mounting brackets and screws

4 + 1 menec al wert t.hing

× /2 ^2 top lifting

2 × circles

Please read before beginning installation

The water connection to your ice and water product can be self-installed. It is recommended that you seek advice from a licensed plumber (if necessary) before commencing the installation.

CAUTION

Your warranty may be voided by an incorrect installation.

Water supply and plumbing

A drinkable water supply to suit a 1/2" tap hirt is required adjacent to the refrigerator. In a recommended that a licensed pump or install a new water supply outlet near to the appliance should be the hirt supplied no be long enough. In a non recommended that the tubing be extended as this could adversely affect the flow of water to the ice maker or water dispenser.

The water disperser and automatic ice rakes require a drinkable water supply with a pressure range of between 206 kPa and 689 kPa (30PSI and '00PSI). If the water supply is above 100 psi a pressure liming valve should be involved.

It is recommended that a Note Reduction Valve also be fined in the water supply line. This will reduce water hammer and its officers from quick action household radios and fast using valves on appliances. The re-genderor water valve is one filled with a push kit connector for inserting the water tube. Where the tap connection is other than 1/2" adaptors can be purchased from plumbing supply stores or good hardware stores.

Water filter

locate the water filter or close or possible to the water supply up in a vertical position where possible. The filter will need to be repeated every 12 months to prevent excess filtered microorganism building, and thus ensure continuous purified water and ice supply for you and your family. Replacement water from are available from Electronic Home Products Spine Park Centres and can be asked to you for your convenience (refer to back page for contact details).

CAUTION

If the appliance is not connected to a water supply, ensure that the ice maker is switches of "refer to STE ^1 I overload" if you don't do this a loud buzzing noise will be heard intermittently. The new hossors supplied with no appliance must be used and old hose sets should not be reused. Do not use with water that is micrologically unsafe or with water of unknown quality without adequate or disinfection. Never connect the appliance to a hot water supply. Never install the water tile in an area of the wall where there may be electricity w/o and / or water supply pipes

ICE AND WATER INSTALLATION INITIAL START-UP

Never install the water filter in an area of ice and sunlight. Check for water leaks at oil water connection points in the last 2 to 3 hours after installation, and correct it in case of any water leak. Rochock after 24 hours; I look still occurs, I is recommended to contact a licensed plumber for advice.

Water is to be cancelled as an diogor below

graph TD
    A["ank"] --> B["bricket"]
    B --> C["water"]
    B --> D["worse inlet"]
    B --> E["flow"]
    C --> F[" anchor "]
    D --> F
    E --> F

Step

Ensure that the ice makes and water disperse the switched Oil

Sep 2

Disconnect refrigerator from power supply

Sep. 2

Connect top filling to water supply top. Tap must be close to the net gator.

Step 4

Install brackets for their close to top. Plan to leave as much tubing as possible behind the refrigerator to enable to be moved early for cleaning or service.

CAUTION

Do not screw the brackets into the refrigerator as this may void your warranty and permanently damage the refrigerator.

Step 5

Write date or filter. The filter will need to be repeated every 12 months.

Step 6

Extend the collar and die a drop around the collar at both ends of the filter.

S### 7

Fill filter to brackets with water flow pointing up.

Step B

Push shorter tube into tap ring past insertion mark.

Step 5

Push other ord into filter NET

Step 10

Connect remaining the length into the OUTF

Step 11

Connect other end of remaining tube length to inlet an balloon tight band side of refrigerator.

Sep 12

Turn or water and check all joints and tubes for looks

Illustration of a hand using a faucet to lift a pipe (no text or symbols visible)

Sep 13

Recanted the power

Hand holding a plug inserted into an electrical socket (no text or symbols visible)

Step 14.

Move the refrigerator back into place being careful to a kink or split the tubing.

INSTALLING YOUR NEW APPLIANCE USING YOUR ELECTRONIC CONTROLS - ICE & WATER MODELS

Sep 5

Using a large container or the water dispenser to clear air from lines. This may take a few minutes. Purge and dispense a minimum of 2 lines of water, initial water may be back in colour. This is residual carbon dust from the filter and a nontoxic. If the water is slow to chat off or the dispenser is dripping, air may still be in the lines. Other purge more water through the system to remove his air or allow some time for the air to be removed over a subsequent dispensing.

Diagram of a hand holding a mechanical component, possibly a valve or pump, with no visible text or symbols.

50

Switch ON Ice Maker

Step 1

After 24 hours remove ice bin and dispose of first few patches of ice to ensure that impurities have been flushed from the system.

Two illustrations showing hands holding a box with small objects inside, separated by an open lid (no text or symbols)

TIPS & INFORMATION

- Ensure their taps are turned off when repeating and hitting filters. Remember to turn the taps back on when filter filling is complete.

• Always fit filter as per monalochase instructions, paying special attention to water flow direction.
- If you need to replace water tube, only use approved water quality piping that meets the pressure requirements.
- Do not allow the water tubing to become kirked
or trapped under the refrigerator when moving the refrigerator back into position.
- Make sure your te' genitor is level to avoid eleven ice cubes.
- After installation, run the water dispenser for a few minutes to remove carbon dust and to ensure that all air bubbles have been purged from the tubing. Dipeting may occur if no bubbles remain in the tube.
- Replace her at suggested intervals to avoid water/ce reduction and irreducritics in tasks.
- Remove and clean ice bins once a month, discarding unused ice pipes. This will ensure fresh, clear ice and smooth operation of your ice maker.
- Clean and empty the dispenser dr a tray regularly to avoid overflow
- As the water cut off is not in order, leave glass under disperser briefly until water has stopped flowing to avoid spills.

WARNING

If you have not used the dispenser for some time, discard the first seven or eight cups of water and any ice that the ice maker produces in the last 24 hours [container more] could have settled in the water prices.

The electronic display panel consists of an LCD display with blue backlighting. When the power is first turned on, the display will backlighting, will activate. If no buttons have been pressed and the ridge door is closed, the backlighting will run off over 30 seconds.

Controlling the temperature

We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is so to 3°C and the freezer to -1.5°C. If you want to charge the temperature, to low the instructions below. Make only small adjustments and we * 24 hours to see if it's correct. Checking the sickness of ice cream is a good indication if your freezer is his right temperature, while footing the sickness of water kept in the refrigerator is a good way of checking the temperature of the food compartment.

NOTE: When you set a temperature, you set an average temperature for the whole refrigerator cooling. Temperatures inside each compartment may vary, depending on how much food you store and where you place it. Iigh or low room temperatures may also affect the actual temperature inside the refrigerator.
If no button has been pressed for some time there may be a decay of up to 2 seconds before the display seconds, this is normal and is a pair or the display design to reduce the chance of accidental changes.

Changing the freezer temperature

Press the Fridge/freezer button until the freezer

compartment is illuminated on the refrigerator icon. Use the "1" and "+" buttons to the left and right of the display to select a lower or higher temperature in 1°C stops. Once the maximum of 23°C is reached, the display will return to -14°C with the next press of the button.

Changing the refrigerator temperature

Press the Fridge/Freezer button until the food compartment is illuminated on the refrigerator icon. Use the ^1 and ^2 buttons to be left and right of the display to select a lower or higher temperature in ^3 steps. Once ^4 is reached, the display will return to ^7 c with the next press of the button.

Shopping function

Use the Shopping function when you add a large amount of food to the fridge compartment. To use this function, gross no Modes button until. Shopping is illuminated. No. Shopping function of the loose quickly out does not allow the enterprise in the heavier compartment. The shopping function will operate for 90 minutes before automatically returning to normal operation. If you want to turn no. Shopping function will before 90 minutes faster present, simply press the Mode's button again until the Shopping can discuss and the refrigerator will return to normal operation.

Freezer temperature alarm

If the alarm sounds for no apparent reason, check whether anything is keeping the door open. If the freezer becomes too warm due to the freezer door being left open or warm food being placed too close to the temperature sensor, a buzzer will score.

If the freezer temperature alarm sounds, press any button to disable the alarm.

Make sure nothing is looking the freezer door open and move any warm food away from the temperature sensor. If the freezer is still too warm after 50 minutes, the alarm will sound again, indicating that something may be wrong with the air generator.

NOTE The freeze-temperature alarm can be reset for 12 hours by holding the alarm reset button continuously at 10 seconds.

USING YOUR ELECTRONIC CONTROLS - ICE & WATER MODELS USING YOUR ELECTRONIC CONTROLS - ICE & WATER MODELS

Door alarm

The bridge or freezer door is off open for more than two minutes, the deck will busy and the refrigerator icon in the corner or no display will flash indicating which door is open. If you want to leave the door open while you load the refrigerator, you can turn the deck off for 8 minutes by pressing any button, note that the deck will continue to find up the door is closed.

The fridge door is left open for more than 30 minutes, that will automatically turn off to save energy. To turn the right back on simply close and reopen the door again.

Display lock

Press and hold the Display Lock button for 3 seconds to activate the display lock. It's will discontinue the display to prevent occidental changes to settings. To turn the display lock off, hold the Display Lock button for 3 seconds.

Drinks chill timer

The drinks chill more in bed to quickly chill a table. Prices the table in the ladder and the timer can be set for a minimum of 5 minutes to a maximum of 30 minutes. To set, simply press the drinks chill together and an initial line of 20 minutes appears. To adjust the timer use the "I" and "II" buttons to the left and right of the display to a maximum of 30 minutes or a minimum of 5 minutes in 5 minute steps. Once set, a time will count down one mms at a time. You can change the lime or turn the timer of even after the countdown was added. A buzzer will let you when the line is hashed and the icon will lose all the alarm reset below a presence.

If your drink is not cold enough, reese the drinks chill function [remembering the drink's already partially chilled] suggested chilling times.

10 minutes for cans of crink.

20 minutes for bottles of wine

30 minutes for bottles of soft drink.

Energy efficiency

Your range has been designed to be energy-efficient and can operate in three modes. Normal, Fair and Holiday.

- Eco mode

Eco mode is the default mode of your refrigerator. The boat iron will outorgically appear on the electronic display when your refrigerator is operating in two modes.

- Normal mode

Normal mode is used when you require extra cooling or when the refrigerator does is opened more from normal. The cat symbol will disappear from the electronic display when your refrigerator is operating in normal mode. Normal mode is activated when

- The freezer compartment temperature setting is colder than -18°C

- The fresh local component temperature setting is color range = 3°C.

■ The quick freeze function is activated

- The door alarm is activated

• The freeze temperature plant is advosed.

- Holiday mode

Use this function when you go on holiday or leave the house for long periods. The refrigerator mini-ros ofrosting to save energy but mainairs your temperature settings. To pull the refrigerator into holiday mode, press the masses button until suitcase symbol is illuminated. The holiday mode will operate until the button is pressed again or the refrigerator door is opened.

NOTE: Opening the freeze drawer won't effect the operation of either too or Holiday voices.

Sabbath mode

Entering Subcooth mode will divide of the refrigerator lighting, turn off the ice maker, water dissenser and prevent any other electrical activity from occurring as a result of the refrigerator door's being opened.

In enter Seahall, Node press and hold the Display box and 1" burons simultaneously for 3 seconds.

Four baccs will sound and the display will show sb to indicate Saboath Mode.

All alarm functions are disabled except for the high Temperature Arm for reasons of face safety. If there is a high temperature issue during this period the alarm will sound intermittently for 10 minutes then turn off on its own. To exit Sabbam Move press and hold the 'Display lock' and "buttons simultaneously for 3 seconds. Four peaks will sound and the refrigerator will resume normal operation.

Quick freeze

The Quick freeze made allows for increased production of ice, which is useful for entertaining. To use this function, press the Modes button until Quick freeze is illuminated. The Quick freeze limiter will now operate for 12 hours. If you went to turn the Quick freeze of 'bushle' 12 hours have passed, simply press the Modes button again until the Quick freeze icon disappears and the refrigerator will return to normal operation.

Disabling and enabling ice maker and water dispenser

To disclose the automatic ice cooler, press the ice & Water On/OFF buffer until the locomaker off icon is illuminated. Press the buffer on once more to disable the water dissipation, a water off icon will now be displayed. To disable both ice and water dispensers, press the button until both locomaker off and Water off icons are displayed. Press the button once more to enable both ice and water dispensers.

Filter replacement

Your refrigerator is fitted with a water filter which periodically requires replacement. When your filter requires replacement, Order filter and Replace filter icons will occur as a reminder to both order and replace the water filter. When the replace filter icon appears on alarm will sound, pressing any button or the user interface will use the alarm for one week.

When the timer box been replaced pass and hold the ice and Water button for three seconds to reset the timer replace time.

Other special refrigerator features

- Independent control of the compressor and fan to provide the best performance.

- Extra cooling depending on the number of times the door is opened.

- Automatically adjusts defrost time when the door is not frequently opened.

NOTE: Deploy inclusions may be due to brief power supply interruptions. If this occurs, turn the refrigerator off of the power point and wait 5 minutes. The refrigerator pressure will need time to equalise before you turn the refrigerator on again. Changing the light bulb

ELECTRONIC DISPLAY CONTROLS – ELECTRONIC MODELS

The ICD pane has a blue backlight and 6 touch buttons. It also contains an infrared light sensor, which turns the lights in the mesh load section on and off. When the power is first turned on, you will see the default settings, with the backlighting on.

Controlling the temperature

The below temperature for the refrigerator is 3°C and -18°C for the freezer. If you want to change the temperature, follow the instructions below. Make only small adjustments and wait 24 hours to see if it's correct. Checking the wellness of ice cream is a good indication if your freezer is the right temperature, while checking the temperature of water kiln in the refrigerator is a good way of checking the temperature of the food compartment.

NO

When you set a temperature, you set an average temperature to the whole refrigerator coordinate. Temperatures inside each compartment may vary, depending on how much and you state and where you place it. High or low room temperature may also affect the actual temperature inside the refrigerator.

Changing the freezer temperature

Press the freezer button to move the freezer color in 1°C stops. Once the maximum of -23°C is reached, the display will return to -14°C with the next press of the button. The paragraph gets smaller with colder freezer settings.

Changing the refrigerator temperature Press the fridge button to make the refrigerator colder in 1°C stops. Once 10^ C is proached, the rear window starts to

7°C with the next button press. The bar graph gets stored with border refrigerator settings.

Quick freeze function

Use the quick fence fund on when you add a large amount of load to the

freezer compartment. This breezes the tool quickly but does not affect the temperature in the refrigerator compartment. To use this function, press the quick freeze button once. An or noted icon will light up. the quick freeze function will now operate for 90 minutes. If you want to turn the quick freeze function off before 90 minutes have passed, simply press the quick freeze button again. The icon will disappear and the freezer with return to normal operation.

Freezer temperature alarm

If the alarm sounds for no apparent reason, check whether anything is keeping the door open. If the freezer becomes too warm due to the freezer door being left open or warm food being priced too close to the temperature sensor, a buzzer will sound.

The icon adjacent to the alarm reset button, the freezer set temperature and bar gageh will all flash, until the alarm reset button is pressed. Once pressed, the alarm disable icon adjacent to the alarm button will illuminate for 50 minutes, or until the temperature drops to an acceptable level.

Make sure nothing, a hording the freezer door open and move any worn food away from the temperature sensor. If the freezer is still too warm after 50 minutes, the alarm will sound again, indicating not something may be wrong with the ringing error.

NOTE

The freezer temperature alarm can be reset for 12 hours by pressing the alarm reset button continuously for 10 seconds.

Door alarm

If the fridge door is left open for more than two minutes, the alarm will buzz and go to an open floor will clean, along with selling and buying.

If you want to leave the door open while you load the refrigerator, you can turn the alarm off for 8 minutes by pressing the alarm reset button.

CHILD LOCK

Press and hold the frozen and fridge buttons together to no valve the child lock. This will disable the display to

D

prevent occidental changes to settings. To turn the child lacks it, press and hold age buttons together.

Drinks chill timer

The drinks chill, timer is used to quickly chill a bottle. Pace the bottle in the

minimum of 5 minutes to a max run of 30 minutes. To set, simply press the drinks chill button repeatedly for the number of minutes in 5 minute intervals. Once set, on animated lean appears beside the drinks chill button, with a timer that counts down one minute or a time.

You can change the time at 1 am the time of even after the countdown has started. A buzzer will tell you when the time is finished and he Icon will flash until he alarm reset natten is pressed.

If your drink is not sold enough, yet the drinks chill function (remembering the drink is already partially chilled).

Succesated chilling times

• 10 minutes for cars of drink

• 20 minutes for bottles of wine

• 30 minutes for bottles of soft drink.

CAUTION

Care should be taken to ensure bottles are not left in freezer for longer periods as freezing and breakage could occur.

Energy efficiency

Your refrigerator has been designed to be energy-efficient and can operate in three modes: Normal, Eco and Holiday.

Normal mode

Normal mode is used when the

refrigerator door is open. It's me

de cut made of your re question.

Eco mode

Eco mode can be used if you don't open

your refugee or close a lot. It is motivated

In one of two ways

by manually pressing the eco/holiday button once when a normal mode, or.

- By octanolically activated after 30 minutes if the refrigerator door has not been opened.

The leaf icon will appear on the electronic display when eco mode is on. If eco mode is activated automatically, the refrigerator will revert to normal mode once the refrigerator down is opened.

It eco mode is entered monocly, opening the door will not revort it back to normal mode. To exit eco mode, simply press the eco/holiday button until the word "normal" is deployed.

Use Eco mode when you're not using the refrigerator all the time leg, as a longitude storage refrigerator. If the door is going to be opened a lot, switch back to normal mode. Remember, Eco mode is turned on manually, it won't switch off automatically.

Holiday mode

Use this button when you go on holiday or leave the house for long periods.

The refrigerator minimises defrosting to save energy but more in its temperature springs. To put the refrigerator into holiday mode, press the eco/holiday mode balloon until the drone icon appears. The holiday mode will operate until the button is pressed again or the refrigerator door is open.

NOTE

Opening the freezer door won, elled the operation of either fan or holiday modes.

Eco and Holiday Modes minimise defrosting to save energy, while maintaining your temperature settings.

MANUAL (ROTARY) CONTROLS - MANUAL MODELS

Controlling the temperature

Only make small temperature adjustments at first one week 24 hours to see if you need to move only more.

Top Mount Models

Use the temperature controls at the rear of the refrigerator compartment. Set refrigerator and heater controls to M.D. at startup.

- is no the freezer temperature

1. Series: he is ever control top knob or ef knob;
2. Turn clockwise to set colder.
3. Turn anti clockwise to set less cold.

- Adjusting the refrigerator temperature. 1. See the refrigerator control 'bottom knob or right knob'. 2. turn clockwise to set colder. 3. turn anti-clockwise to set less cold.

Bottom Mount Models

Use the temperature controls at the rear of the refrigerator compartment. Set refrigerator and freezer controls to MO at start-up.

- Adjusting the refrigerator temperature. 1. Soor the refrigerator control (top knob) 2. Turn clockwise to set colder. 3. Turn anticlockwise to set lens cold

- Adjusting the freezer temperature 1. See the freezer control (bo-orn knob) 2. Turn clockwise to set colder. 3. Turn anti-clockwise to set less cold.

For top mount and front mount modes, the coluses freezer setting is not recommended in normal or very not climates. It will be the cooling to the refrigerator section. In very cold climates (where temperatures are below 10°C), the freezer may need to be set colder.

Single door all refrigerator models

Set the temperature with the temperature control at the rear of the compartment. Set refrigerator control to MID or start up

- Adjusting the all refrigerator temperature: 1. Turn clockwise to set cold 2. Turn anti-clockwise to set less cold.

Single door all freezer models

Use the temperature control at the top of the compartment. Set freezer control to MD or startup.

- Adjusting the vertical freezer temperature: 1. Turn clockwise to set-down 2. Turn anticlockwise to set less cold.

i TIPS & INFORMATION

The temperature in the temperature control is affected by attitude. It's recommended you, set "warmer to compensate - og, or 1000 notices above sea level," set the temperature control to one setting warmer man MID. Checking the softness of ice cream in a good way to check the temperature of the freezer. Also, checking the temperature of water is a good way to check the temperature of the food storage compartment.

USING YOUR APPLIANCE

This sec or tells you how to make the most of the many useful features - cleaning instructions can be found on page 24.

Door storage bins

The top mount mode, bottom mount freezer model and oil refrigerator models are filled with door storage bins. These bins adjust to most different storage needs. All no door bins are completely removed for cleaning. If you want to remove or adjust a bin, lift it over the support lugs on the time door pane. To replace, push the bin down over the support lugs to lock in place.

Dairy compartment

Use the dirty compartment to smoke foods like butter, margarine and cheeses. The compartment is slightly warmer than the rest of the refrigerator compartment, while the lid provides protection against odours.

Deli bin [where fitted]

Use the deli bin to store foods like smallgoods fresh or cooked meat and cheese, or as an additional crisp. The tin will be prevented strong food odour in creeping into the rest of the refrigerator. To remove the deli bin, pull it forward, then lift it up and pull it further forward.

Crisper bin

Use the images by to store vegetables, fruit or meat goods. Change the humidity by sliding the humidity control.

Storing vegetables

Store vegetables in the drisper bin and remember to set the humidity control to more humid (closed).

Storing fruit & smallgoods

Store fruit and smallgoods in the crisis bin and remember to set the humidity control to lose humid open.

Removal (standard Crisper Bins)

1. Empty food from the drawer.
2. Remove the crisper bir(s), by pulling forward, then up and forward again.

3 Remove the chapel shelf by filling the coaches on the underside of the shelf and pulling the shelf forward.

Removal — easy glide (on telescopic extension slides) 1. Remove the cisper joints by pulling forward, then up and forward again, lifting the bin off the slides. Push the slides back into the refrigerator.

CAUTION

Never close the door while the telescopic slides are extended. It may damage the slide and/or the refrigerator or cause the slide to become misengaged from the refrigerator.

CAUTION

to clean it crisis cover with telecopic extensor slices, simply wipe with a church cloth and wear soily water. Never immerse the cover in water, as this could affect the operation of the slide.

To refit (see diagram on next page)

1. With the number pushed in of the way.
2. 5 do the bin into place over the telescopic slices and under the shelf. Push the bin in until it stops, noting that the bin will not be closed all the way.
3. Open the bin to access the finger tabs at the ends on each side of the bin. Use your thumb and forfinger to lift the bin over the end of the side one clip in place.
4. Fully close the bin.

Storosafe™ lockable bins (where fitted) These bins are designed to store items like cosmetics and medicines. They slide on for entry access. The left home bin has a look that is operated by turning the knob located on the blear area between the bins. It is may be turned with a coin. You can remove the Storosafe™ bin(s) for coating. Remove the bin by simply pulling past the stop in the northwest. You will need to lift the bin while pulling it to wear. A small amount of lacer may be required to overcome the front stop.

WARNING

Never store solvents or commutable materials like nail polish, remover or lighter fluid inside your refrigerator. They will affect the life of the plastic components and may treat stored food.

USING YOUR APPLIANCE

SpillSafe™ glass shelves (where fitted)

Spillxale™ glass shelves keep spills on the shelf. A shot retaining system min misce occiencial movement of shelves and they can be adjusted to various heights. Sp isale™ glass shelves are not to be

took on slide cut shelves. To remove the shelf, gently pull them forward until the shelf comes clear of the shelf guides to return the shelf, make sure there is nothing behind that may obstruct movement. Gently push the shelf into the cabinet and back into position.

Bottle Holder (where fitted)

The bottle neler can be used to smoke various types of bottles like wine or beer. Bones should be stored with the boron

end towards the back of the refugee or. Selects are supplied with a chrome, call-width wine rock

Freezer drawers

freezer drawers are tied to bottom mount models and single door all freezer models. The drawers are mounted on telescopic extension slides, to enable full access to the content in the drawer. Clear plastic font provide easy visibility of loads.

To remove the drawer for cleaning,

Enjoyed from the drawer

1. Remove the drawer by pulling it forward and tilting the front to unlock it from the slides. Once you have removed the drawer, ensure the slides are pushed back so they are fully closed.

Never close the door which the telescopic slide are extended. This may damage the slide and/or refrigerator or cause the slide to become disengaged from the refrigerator.

To replace the drawer

1. With the telescopic slides pushed in of the way

2. Slide the drawer into plane over the slides and push the bin until stops. The bin will not be closed at the way.

3. Oper the bin to access the finger tabs of the ends of the telescopic class, on each side of the bin. Using your thumb and touching, lift the bin over the end of the slice and clip in place. If the drawer is not fully engaged on the slide, it's possible the drawer won't stay on the slide if fully extended.

1. fully close the bin

When replacing the drawers after cleaning, we recommend fixing the lower drawer first.

Wine rock (where fitted)

The wine rack can be used to store various types of bottles like wine or beer. Bottle should be stored with the bottom end towards the back of the refrigerator.

Twist ice & serve (where fitted)

Some op tour, bo on ricant and single door vertics freezer models have a twist ice & serve ice cube tray assembly.

To use, remove the tray, fill with water and place back in the heater. Once ice has lourned (approximately 3 hours) simply twice the knob at

the front clockwise until the ice drops into the bin below. A larger bin is provided in some bottom mount models along with an ice sproo.

USING YOUR APPLIANCE

Mounting the twist ice & serve to the other side of the freezer.

Note: this is only possible on Top Mount models.

1. Remove the ice bin and ice cube tray. If the ice tray assembly is frozen to the carriage, simply souozzo the tray and shell together to break the ice.

2. Before you remove the ice carriage, remember to disengage it from the glass shell (as shown), as may result in damage to the assembly.

3. Remove the center under by xengaging it at the front of the shaft, and removing it from the rear.

1. Felt the n.ner in to the rear of the shelf on the right
   Hand size and then engage the tool [as shown].
2. The carriage by strong into the front of the exercise program with the show
3. Refit the ice tray and ice bin

1. Fit the carriage by sliding it into the tumors until the front of the carriage engages with the chest.

2. Ken the co ray and ice oil

LED lighting (where fitted)

Your refrigerator is fitted with long life LED lighting. In the unlikely even the IHD lights should fail, then the I-DY lights should be serviced by her manufacturer, 'I's service agent to similarly qualified technician. Refer to the warranty page for contact details.

When the door is left open for 1.5 minutes, the LED light will die to 50% brightness to conserve energy and prolong the life of the LED. The door is left open for a further 1.5 minutes, the light will automatically turn off. Close and reopen the door again to turn the light back on.

CARE AND MAINTENANCE

Changing the refrigerator Light

1. Switch of the power of the power point and remove the port by pulling the plug.

2. Carefully uncle the light cover as shown in the pictures

1. Unscrew the light bulb and replace it with a new bulb of the same type and wailing. If, when you remove the light bulb the anal rubber "O" ring comes out with the bulb. In the "O" ring over the new bulb and screw bulb into the socket (see diagram or bottom of page).

Never insert your finger into the light bulb socket to check for the presence of the "O" ring.
4. Replace the light cover by hooking the lugs into the slots and pressing up until it is as in.
5. Wait 5 minutes to ensure closures in the refrigeration system are equalised, before turning the refrigerator on all the power pair.

Changing the freezer light (where fitted)

1. Switch of the power at the power point and remove
   the box by pulling the plug.
2. Carefully one of the light cover by pulling the light cover tab of the rear towards you.
3. Unscrew the light bulb and replace it with a new one of the same type and voltage. If, when you remove the light bulb the small rubber "O" ring comes out with the bulb, "the O" ring over the new bulb and screw bulb into the socket (see diagram of bottom of page).
4. Switch of the power of the tower point and remove the torch by pulling the plugs.
5. Carefully uncle the light cover by pulling the light cover tab or the rear towards you.
6. Unscrow the light bulb and replace it with a new one of the same type and wattage.
7. If, when you remove the light bulb the small rubber "O" ring comes out with the bulb, little the "O" ring over the new bulb and screw bulb hits; the socket (see diagram of bottom of pole).
8. Switch of the power of the tower point and remove the torch by pulling the plugs.
9. Carefully uncle the light cover by pulling the light cover tab or the rear towards you.
10. Unscrow the light bulb and replace it with a new one of the same type and wattage.
11. If, when you remove the light bulb the small rubber "O" ring comes out with the bulb, little the "O" ring over the new bulb and screw bulb hits; the socket (see diagram of bottom of pole).
12. Switch of the power of the tower point and remove the torch by pulling the plugs.
13. Carefully uncle the light cover by pulling the light cover tab or the rear towards you.
14. Unscrow the light bulb and replace it with a new one of the same type and wattage.
15. If, when you remove the light bulb the small rubber "O" ring comes out with the bulb, little the "O" ring over the new bulb and screw bulb hits; the socket (see diagram of bottom of pole).
16. Switch of the power of the tower point and remove the torch by pulling the plugs.
17. Carefully uncle the light cover by pulling the light cover tab or the rear towards you.
18. Unscrow the light bulb and replace it with a new one of the same type and wattage.
19. If, when you remove the light bulb the small rubber "O" ring comes out with the bulb, little the "O" ring over the new bulb and screw bulb hits; the socket (see diagram of bottom of pole).
20. Switch of the power at the power point and remove the bolt by pulling the plugs.
21. Carefully uncle the light cover by pulling the light cover tab of the rear towards you.
22. Unabove the light bulb and replace it with a new one of the some type and wattage.
23. When you remove the light bulb the small rubber "O" ring comes out with the bulb, it is the "O" ring over the new bulb and screw bulb into the socket (see diagram of bottom of page).
24. Switch of the power at the power point and remove the bolt by pulling the plugs.
25. Carefully uncle the light cover by pulling the light cover tab of the rear towards you.
26. Unabove the light bulb and replace it with a new one of the some type and wattage.
27. When you remove the light bulb the small rubber "O" ring comes out with the bulb, it is the "O" ring over the new bulb and screw bulb into the socket (see diagram of bottom of page).
28. Switch of the power at the power point and remove the bolt by pulling the plugs.
29. Carefully uncle the light cover by pulling the light cover tab of the rear towards you.
30. Unabove the light bulb and replace it with a new one of the some type and wattage.
31. When you remove the light bulb the small rubber "O" ring comes out with the bulb, it is the "O" ring over the new bulb and screw bulb into the socket (see diagram of bottom of page).
32. Switch of the power at the power point and remove the bolt by pulling the plugs.
33. Carefully uncle the light cover by pulling the light cover tab of the rear towards you.
34. Unabove the light bulb and replace it with a new one of the some type and wattage.
35. When you remove the light bulb the small rubber "O" ring comes out with the bulb, it is the "O" ring over the new bulb and screw bulb into the socket (see diagram of bottom of page).
36. Switch of the power at the power point and remove the bolt by pulling the plugs.
37. Carefully uncle the light cover by pulling the light cover tab of the rear towards you.
38. Unabove the light bulb and replace it with a new one of the some type and wattage.
39. When you remove the light bulb the small rubber "O" ring comes out with the bulb, it is the "O" ring over the new bulb and screw bulb into the socket (see diagram of bottom of page).

GENERAL INFORMATION

Cleaning the refrigerator

WARNING

BEFORE CLEANING: "I am the refrigerator off at the power point and unplug the cord to prevent any chance of electricizing yourself

- Doors and exterior (white & pacific silver) You should only clean the doors with ultrawarm socony water and a call to ch

- Stainless Steel Your stainless steel refrigerator is manufactured from mainstream stainless steel. This stainless steel has a special advanced protective coating that exceeds the removal of marks such as fingerprints and water seats. To keep its appearance, clean it regularly with lukewarm soapy water and a soft cloth.

CAUTION

Never use stainless steel cleaners, abrasive pods or other clearers that will scratch the surface. Damage to the appliance after delivery is not covered by your warranty.

- Interior

Clear the inside of your refrigerator regularly with a soft cloth, unscraded mild soap and lakescent water. Thoroughly dry all surfaces and removable parts and avoid getting water on the controls. Replace removable parts, plug power cord in end switch the power on before returning the coat.

- Door seals Always keep door seats clean by washing them with a mild detergent and warm water, followed by a thorough drying. Sticky food and drink can choose seals to pick to the cabinet and eat when you open the door.

CAUTION

Never use hot water solvents, commercial kitchen cleaners, across cancers, meal pollishes, coats or abrasive cleaners, or scooters to clean your refrigerator. Many commercially available cleaning products and detergents contain solvents that will damage your refrigerator. Use only a sun cloth with an unsemented mild soap and take-warm water.

I your refrigerator has electrocopic exertion slices, simply wipe them with a damp cup to clean them and never remove them in water.

Safety

It is important to use your appliance safely. This means you need to supervise young children and inform persons when they use it. You need to make sure that young children do not play with the appliance. Follow the line on next column

ALWAYS DO THIS

1 Check the power point is properly earned. If you are nor sure get an electric to check it.

2 Switch off and impug the refrigerator on the power point before you clean or move it.

3 If the power supply card is damaged, have it replaced by the manufacturer, service agent or unlikely qualified person.

NEVER DO THIS

Never is children play with the hygiene.

Never store spray cars, explode foods or kitchen dishes in the refrigerator.

Never store dry room in the kitchen compartment.

Never fill very quickly when they list come out of the kitchen. This can turn your lips and mouth.

Never try to prepare the carrying you still.

Never use plastic heaters or dimers in dessert the kitchen because you can receive our electrical shock.

Never use electrical appliances made the food storage area.

Has appliances contains insulation from them with flammable lighting space. The entry rooms, take care where you concentrate it.

Do not damage the appliances circuit.

WARNING

When you disagree of your old refrigerators or free/very, remove any doors to prevent children from being trapped inside.

WARNING

R600g refrigerant warming

This appliance contains a small quantity of flammable RoCOa reagent. Avoid safety hazards by carefully involving, handling, servicing and disposing of the appliance.

• Ensure that the tubing of the refrigerant circuit is not damaged during transportation and installation.
• leaking refrigerant may cause eye injuries or ignites.
• The room for installing appliance must be at least 1 hr. per 5g of refrigerator, the amount of refrigerator in the appliance can be found on the rating plate inside the appliance.
• If you are aware of the refrigerator check the rotating plate inside the refrigerator compartment
• It is hazardous for anyone other than an Authorised Service Person to service this appliance. In Queensland Australia, the Authorisation Service Person (MUS) holds a Cox Work Authorization for hydrocarbon reductigents to carry out servicing or repairs which involve the removal of covers.

Switching off your refrigerator

If you switch off your refrigerator for an extended period, follow these steps to reduce the chances of mould: 1. Remove all food.
2. Kering the case plug from the power print
3. Thoroughly clean and dry the interior.
4. Ensure that all the doors are wedged open slightly for air circulation.

TROUBLESHOOTING

PROBLEM SOLUTION
Refrigerator is not operating	• Check that the power cord is digged on the power cord properly and for the outlet is switches ON. • Try running creatine appliance feed the power outlet. The power is cutting light into a tube but you may have two or a fuse or hopped to account of your home and power supply. • Try adjusting the temperature control in a slightly "colder" position. • Is normal for the freeze ban NO to operate during the automatic refrigerator, or for a seat time after the appliance is switched on.
When we have a set of germs/freezer noise	Modern net garmos/fheezers with increased storage capacity, use high speed compressors. These can provide a seemingly high level of sound which is cute normal. Norms operated sounds inside. • Onceanned gagging, similar to water boiling. • Air flow more job clearness pressure on a wall flat. • A popping noise heard being automatic saline. • A clicking noise heard just below the compressor class this is just the automatic switching alarm of the refrigerator control, running the compressor on a shift.
	Other noise sounds may mean that you need to check and take action. For example, noises only mean that: • The cober's not level. • The box is uneven or weak. • Boles are badly priced and eating. • Three case situations labor on closed on top of or behind or inside the refrigerator. • The book of the other room contains in touching the wall.
	Remember it's quite normal for noise to learn because when the refrigerator parts operating, or during quite periods such as right line.
It is normal for the freezer door to her economy nor bed and loose when the food companies door is closed.	If the freezer door stays on cut out indicates that the fridge and colour necessary should be done with a bit. When if you call means proper to solve the problem, you will be charged on the coat of a service suit, so this is not a warranty bout.
I think one colour inside the refrigerator	• The lines are very clean cleaning. • Some books produce outdoors. • Some animals and swapping our coarse outdoors. • Ask yourself if the eyes are almost too if the time the you stated moving something outdoors.

PROBLEM SOLUTION
When the no or peers to win more than expected.	You need religious chat to a large fridge and lease sectors to keep cool. So it's not many frequently heard the source of the empty, however. To stop operation in the minimum check the following:• Aye doors keep open too long to too often.• Aye controls you too cold! See: "Controlling the temperature" on pages 15-20.• Have a large amount of warm food past recently been stayed! Summer, festive season may be holidays already on a lot more work for your own gamma.
	• If the day is hot at the room is very warm, the refrigerator will need to run more their normal.• This refrigerator will run more that prevent palmarvage until it or when it has been turned off so far long time.
If the temperature in the fridge was too warm	• Check that the opolance has enough changer on the sides, book and top. Rakes in the middle section on pages 10.• Refer to "Controlling the temperature" on pages 10-20.• You may never keep the close open too long or too recently.• Food containers or packaging may be holding a door open.
If there temperature in the fridge was too cold	• Return "Controlling the temperature" on pages 10-20.• Remove the temperature to avoid a glass or easy consumption.
If heavy floating occurs in the freezer	Make sure you fully close the freezer and fridge doors. If the doors are left open, a heavy fire will put some inside the freezer. If in line developed, remove it and take place to properly close the shots.
If water drops on the floor	The delval water loy, focused on the book or understand of the portion, very not so permanently protected, or the dirt tire may not be properly protected to clear water into the body. You may need to cut the refrigerator away from the wall to check the body and tube.
Fridge does not eat vacation move	Turn appliance off a light power button leave off a free 30 minute for the energy to clean. But fun snacks.
While temperature in hot warm on the nights and night side of the fridge	In my will happen, the fridge continues heart touch inside in a notice of the prices. It is normal for the card and not of the fridge to end warm/bed while spending. This will be more noticeable during start up and her ambient conditions.

IF YOU STILL REQUIRE SERVICE

If you have a problem, and the problem permits Allen you have made no checks mentioned above, contact your nearest approved Service Centre or the dealer you bought the refrigerator from. Be ready to quote the mood number, 9-digit PNSO and 8-digit serial number, which is stated on the label inside the refrigerator compartment.

ICE + WATER TROUBLESHOOTING

problem solution

Automatic inverter

The ice maker is not making any ice • See the inner section in water instead of rain, determined on

• Turn on the water tap. • See the problem section "if the temperature in the refrigerator is too warm".

• The ice & water filter cartridge may be clogged to restricted by foreign material, and will need to be replaced. • Clock press/or change filter

The inverter is not making enough ice • The ice maker should produce approximately 0.5-1 kilogram, of ice every 24 hours. • Open the household water tap • Replace the water filter cartridge • See section 'Controlling temperatures'

ce cubes are too small or too big • Replace the filter cartridge, as the water filter cartridge may be clogged. • Check water supply has, for risks • Check water pressure sheets minimum and minimum requirement (see Install institutional)

the ice has a bed colour and water • Decor wood slightly. (Second scale ice, the iceAACor will produce a brown supply. • Add ice replace water free to water supply. Correll o water purifying company. • Discord scale ice monthly

IF YOU STILL REQUIRE SERVICE

If you have a problem, and the problem persists after you have made the checks mentioned, contact your nearest Electrical approved Service Center on the dealer you bought the refrigerator from. He ready to quote the model number, 2-digit FNC and B digit serial number, which is stored on the label inside the refrigerator compartment.

Electrolux Warranty

CHSALB IN AUSTRAL AND NEW ZHI AND

This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance.

In this warranty:

(a) 'acceptable quality' as extended to in clause 10 of this warranty has the same meaning relative to the AGI:

(b) ACL Teams Schedule 2 to the Competitor and Consumer Act 2010;

(a) 'Appliance' means any Destroix product purchased by you and accompanied by this document;

(e) "Electrolux" means Electrolux Home Products Pty Ltd of 159 O'Jordan Street, Mascol KSW 2020. ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) limited (on formerly Electrolux) of 3.5 Nid Burgan Road, Mount Wellington, in respect of Appliances purchased in New Zealand.

"Major failure" is referred to in clause 10 of this warranty has the same meaning referred to in the ACU and includes a situation when an Appliance cannot be repaired or it is uneconomic for Electrolux, at its discretion, to repair an Appliance during the Warranty Period.

(g) "Warranty Period" means the Appliance is warranted against manufacturing defects in Australia and New Zealand for 24 months and for the Appliance's compressor, condenser, evaporator and one an additional 35 months parts only warranty applies, following the date of original purchase of the Appliance;

(10) 'you' means the purchaser of the Appliance not having purchased

1. This warranty only applies to Appliances purchased and used in Australia or New Zealand and used in nominal domestic applications and is in addition to Japan does not exclude, restrict, or purity in any way any non-exclusible statutory warranties in Australia or New Zealand.

2. During the Warranty Period Electrolux or its ASG will, at no extra charge if your Appliance is ready accessible for service, without social equipment and subject to these terms and conditions, repair or replace any parts which I considers to be defective. Electrolux or its ASG may use remanufactured parts to repair your Appliance. You agree that any replaced Appliances or parts become the priority of Electrolux. This warranty does not apply to light globes, stones, filters or similar portable parts.

3. Paris and Appliances not supplied by Elecrolux are not covered by this warranty.

4. To the extent permitted by law, you will bear the cost of transportation travel and delivery of the Appliances to and from Electrons or its ABC. If you made outside at the service area, you will bear the cost of:

(4) travel of an authorized representative.

(b) transportation and delivery of the Appliance to end from Electrolux or its AEC.

in all instances, unless the Appliance is transported by Electrolux or an Electrolux authorized representative, the Appliance is transported at the owner's cost and risk while in transit to and from Electrolux or its ASC.

1. Proof of purchase is required before you can make a claim under this warranty.

2. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. Electrod is not liable in the following situations which are not exhausting:

(a) the Appliance is damaged by

(1) 2023年7月

(i) Measure of actual, including results to properly maintain or service (ii) normal wear and tear

(iv) power surges, electrical damage or incoiled power supply (iv) incanalator or incoiler installation.

(ii) incorrect, improper or inappropriate operation

will value to comply with any additional instructions supplied with the Appliance.

(3) the Appliance is modified without authority from Electrolyx In writing. (2) the Appliance's serial number or warranty seal has been removed or disassee.

(a) the Appliance was serviced or repaired by anyone other than Electrolux, an authorised repair or ASC.

1. This warranty, the contract to which creates and the relationship between you and Electric are governed by the law applicable, where the Appliance was purchased. Where the Appliance was purchased in New Zealand for commercial purposes the Consumer Guarantee Act does not such.

2. To the extent permitted by law and subject to your non-excludable statutory rights and warranties, Electrinx excludes all warranties and facilities (other than as contained in this document) including liability for any loss or damage whether direct or indirect arising from your purchase, use or non-use of the Appliance

3. For Appliances and services provided by Electrolux in Australia, the Appliances come with a guarantee by Electrolux, but cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliances repaired or replaced it the Appliances take to be of acceptable quality and the nature does not amount to a major failure. The benefits to you given by this warranty are in addition to your other rights and her interests under a law in relation to the Appliances or services to which the warranty relates.

4. At all times during the Warranty Period, Bostroux trial, at his discretion, determines whether or applies, replacement or return will apply if an Appliance has a valid warranty claim applicable to it.

5. For Appliances and services provided by Electricx in New Zealand, the Appliances came with a guarantee by Hochalter pursuant to the provisions of the Consumer Guarantress Act, the Sale of Goods Act and the Fair Indigo Act.

6. To ensure about claiming under this warranty, please follow these steps. (a) carefully check the operating instructions, user manual and the terms of this warranty;

(5) Have the model and serial number of the Appliance available.

: have the proof of purchase (e.g. an invoice) available

Telephone the numbers drawn below.

1. You accept that if you make a warranty claim, Electrolux and its ASC may exchange information in relation to you to enable Electrolux to meet its obligations under this warranty.

Important Notice
Before calling for service, please ensure that the stops listed in clause 13 above have been followed

FOR SERVICEor to find the address of your neareststate service centre in Australia.PLEASE CALL 13 13 49For the contact of a local call (Austri & Co.)	SERVICE AUSTRALIAElectroluxHE-CHIKOLIN HOME PRODUCKISWWW.COATE.COM.ZU	FOR SPARE PARTSor to find the address of your neareststate service centre in Australia.PLEASE CALL 13 13 50For the contact of a local call (Austri & Co.)
FOR SERVICEor to find the address of your nearestauthorised service centre in New ZealandFREE CALL 0800 10 66 10(www.redu.com)	SERVICE NEW ZEALANDElectroluxELECTROLLIX INC LimitedWALDARO, WALDARO	FOR SPARE PARTSor to find the address of your neareststate service centre in New ZealandFREE CALL 0800 10 66 20(www.redu.com)

GFR_Horn_Aug18

For more information on all Westinghouse appliances, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website:

AUSTRALIA

phone: [phone]

fax: [phone]

email: [e-mail]

web: www.westinghouse.com.au

NEW ZEALAND

phone: [phone]

fax: [phone]

email: [e-mail]

web: www.westinghouse.co.nz

Electrolux

TOP SERVICE

Top Service encompasses the after sales service provided by The Electrolux Group to consumers including delivery, home service and spare parts.

Westinghouse. We are part of the Electrolux family.

Share more of our thinking at www.electrolux.com.au

© 2014 Electrolux Home Products Pty Ltd ABN 51 004 762 341

WMAN_TMBMSDIW_Aug14

Part number: A00394601