KA CEH 3 - Heating KALORIK - Free user manual and instructions

Product Type	Ceramic Fan Heater
Brand	Kalorik
Model	KA CEH 3
Dimensions (approx.)	22 x 15 x 30 cm (8.7 x 5.9 x 11.8 in)
Weight	1.5 kg (3.3 lbs)
Power Supply	220-240 V, 50/60 Hz
Power Consumption	2000 W max
Heating Element	Ceramic heating element
Heating Settings	2 power levels (1000 W / 2000 W)
Fan Speed	2 speeds
Thermostat	Adjustable thermostat with temperature control
Oscillation	No
Timing	No timer
Remote Control	Not included
Safety Features	Overheat protection, tip-over switch, cool-touch housing
Noise Level	Approx. 45 dB (low speed)
Room Coverage	Up to 20 m² (215 ft²)
Maintenance & Cleaning	Wipe with dry cloth; do not immerse in water
Spare Parts & Repairability	Contact Kalorik customer service for spare parts; repairs by qualified technician

Frequently Asked Questions - KA CEH 3 KALORIK

How do I turn on the Kalorik KA CEH 3 heater?

Plug the heater into a power outlet and turn the power switch to the desired heat setting (I for low, II for high). Adjust the thermostat knob to your preferred temperature.

What is the maximum power consumption of this heater?

The heater has a maximum power consumption of 2000 W at the high setting.

Does the KA CEH 3 have an oscillation function?

No, this model does not feature oscillation. It directs heat in a fixed forward direction.

How do I clean the heater?

Always unplug the heater and let it cool completely. Wipe the exterior with a soft, dry cloth. Do not use water or chemical cleaners.

What safety features does the heater have?

It includes overheat protection and a tip-over switch that automatically shuts off the heater if it is knocked over.

Can I use the heater in a bathroom?

No, this heater is not designed for use in bathrooms or high-humidity areas. It should be used in dry indoor spaces.

How do I adjust the thermostat?

Turn the thermostat knob clockwise to increase the desired temperature, or counterclockwise to decrease it. The heater will cycle on and off to maintain the set temperature.

Why does the heater stop working after a while?

If the heater shuts off unexpectedly, it may have triggered the overheat protection. Allow it to cool for 10-15 minutes, then ensure the air intake and outlet are not blocked before restarting.

What is the noise level of this heater?

At low speed, the noise level is approximately 45 dB, comparable to a quiet conversation. At high speed, it is slightly louder.

Where can I find spare parts for my Kalorik heater?

Contact Kalorik customer support via their website or call the hotline. Provide the model number KA CEH 3 for assistance.

USER MANUAL KA CEH 3 KALORIK

1. ON/OFF-fan switch
2. Heating I (1000 W)
3. Heating II (1000 W)
4. Oscillation button
5. Tilt switch
6. Pilot light
7. Air outlet

SP

Please read these instructions carefully before using the appliance.

Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.

☐ Check that your mains voltage corresponds to that stated on the appliance.
☐ Never leave the appliance unsupervised when in use.
From time to time check the cord for damages. Never use the appliance if cord or appliance shows any signs of damage but have it checked and repaired by a competent qualified service(*). Should the cord be damaged, it must be replaced by a competent qualified service (*)
☐ Only use the appliance for domestic purposes and in the way indicated in these instructions.
☐ Never immerse the appliance in water or any other liquid for any reason whatsoever. When cleaning the appliance, refer to the instructions in the paragraph "Cleaning and care" because the water penetration in the appliance can be very dangerous.
□ Never use the appliance near hot surfaces.
Before cleaning and when you do not use the appliance, always unplug the appliance from the power supply. Do not attempt to remove the plug from the wall socket with wet hands.
☐ Never use the appliance outside and always place it in a dry environment.
☐ Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
☐ Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
☐ No responsibility is accepted if damage results from improper use, or if these instructions are not complied with.
☐ Stand the appliance on a stable surface so that it cannot fall.
☐ Do not place the appliance under a power socket. The power socket must not be in the hot airflow of the appliance.
□ Always position the heater in such a way that inflammable materials (such as curtains) cannot be ignited. Ensure at all times that the unit is placed solidly on its base. Make sure that the air inlet and outlet openings are not blocked. To avoid any risk of fire, do not cover the heater (ex. With clothes).
☐ The heater should only be operated at a minimum distance of 50cm from any wall or other object and of 1 meter from combustibles.
☐ Warning: Do not operate the heater near baths, showers, washbasins, swimming pools or any other water container. It must be impossible to reach the commands of your appliance when you are in contact with water.
☐ The temperature of the grids may be very high when the appliance is in use. Avoid contact with the skin.
☐ Do not allow the power cord to touch any hot part of the appliance.
☐ Never use the appliance near inflammable or explosive materials.
☐ Do not insert any objects through the grille or into the interior of the appliance.
☐ Do not use double adapters or other appliances to connect with heater.

3 KA CEH 3-070716

(*) Competent qualified service: after sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case you should return the appliance to this service.

POSITIONING OF THE APPLIANCE

The heater should only be operated at a minimum distance of 50cm from any wall or other object. Position the air flow in order to optimise the heating of the room. Avoid corners, small volumes, floors and ceilings.

When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure sufficient ventilation. This smell will disappear very quickly.

USE

- When the appliance is plugged in, the pilot light is on.

- Switch on the appliance by pressing the ON/OFF-fan button of the appliance. The appliance starts operating in fan mode.

- Select the heat by means of the heating buttons I and II:

I = minimum heat (1000W) I + II = maximum heat (2000W)

- Press the oscillation button to switch the oscillating movement on and off.

- To switch off the appliance, first put the heating buttons in off position and leave the fan mode during 3 minutes so that the appliance cools down. Then press the "ON/OFF" switch.

- Your appliance is fitted with two safety devices: the first one disconnects your appliance when it is tilted or tipped. If your appliance falls, switch it off, replace it correctly and switch it on again. The second safety device disconnects the appliance in case of overheating by means of a thermo fuse.

- In case your appliance does not work when you switch it on, check that it is correctly placed and that the safety device is not blocked.

MAINTENANCE AND CLEANING

• Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely.
• The housing may be wiped with a slightly damp, lint-fee cloth; do not use any abrasive scouring pad or steel wool.
  • The grids are particularly delicate; to clean them you can carefully use a vacuum cleaner.
• When you do not use the appliance, you can cover and place it in a dry environment.

PROTECTION OF THE ENVIRONMENT- DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol — the rating label or on the packaging, your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directive.

4 KA CEH 3-070716