AT-HD510VGA - Audio/Video Lenexpo - Free user manual and instructions

Product Type	PC/HDTV to HDMI Scaler
Model	AT-HD510VGA
Brand	Lenexpo
Dimensions (mm)	154 (D) x 100 (W) x 25 (H)
Weight (g)	340
Power Supply	5V/2.6A DC, US/EU standards, CE/FCC/UL certified
Chassis Material	Aluminum
Color	Black
Input Ports	1 x VGA, 1 x 3.5mm Phone Jack, 1 x TOSLink Optical
Output Ports	1 x HDMI, 1 x 3.5mm Phone Jack, 1 x TOSLink Optical, 1 x VGA (Local Monitor)
Supported PC Resolutions	VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA
Supported SD/HD Resolutions	480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Audio Support	Stereo LPCM analog/digital input and output; simultaneous output to HDMI, TOSLink, and phone jack
Compliance	HDMI 1.2, HDCP 1.1, DVI 1.0
OSD Adjustment Features	Contrast, Brightness, Hue, Saturation, Sharpness, RGB Level, Aspect Ratio (Full, Overscan, Underscan, Letterbox, Panscan)
Operating Temperature	0°C to 48°C
Safety Precautions	Do not expose to rain or moisture; use only included power supply; unplug before cleaning; do not open unit; avoid excessive humidity
Maintenance	Clean with damp cloth; do not use cleaning fluids or aerosols
Warranty	3 years from date of receipt; covers defects in materials and workmanship

Frequently Asked Questions - AT-HD510VGA Lenexpo

How do I enable the VGA output on my laptop?

Most laptops have VGA output disabled by default. To enable it, press the Fn key together with the LCD/CRT key (often an icon on F1-F12 keys). This toggles between laptop screen only, external display only, and both. Alternatively, for extended mode, right-click the desktop, go to Display Properties > Settings tab, select external monitor (blue rectangle 2), check 'Extend my Windows desktop onto this monitor', and adjust resolution.

What resolutions does the AT-HD510VGA support?

The scaler supports a wide range of PC and HD resolutions. For PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA. For SD/HD: 480i, 576i, 480p, 576p, 720p (50/60Hz), 1080i (25/30Hz), 1080p (50/60Hz). You can select the output resolution via the OSD menu.

How do I connect a PC to an HDTV using this device?

Connect your PC's VGA output to the VGA input of the scaler using a D-Sub cable. Then connect the scaler's HDMI output to your HDTV's HDMI input. Optionally, connect audio from your PC to the scaler's 3.5mm phone jack or TOSLink input. The scaler will upscale the video signal to the desired resolution.

Can I output audio to multiple devices simultaneously?

Yes. The scaler can output stereo LPCM audio to HDMI, TOSLink (optical fiber), and 3.5mm phone jack simultaneously. You select the audio input source in the OSD menu.

How do I reset the unit to factory settings?

Press and hold the Menu button for 5 seconds. While holding, disconnect the power plug, wait 5 seconds, reconnect power, continue holding Menu for another 5 seconds, then release. Wait up to 10 seconds for the unit to reinitialize.

What is the purpose of the local VGA output?

The local VGA output allows you to connect a local monitor to see the same signal as the main display. This is useful for presentations or when you need to view the source separately. The local output mirrors the input resolution type (PC or HD).

How do I adjust picture settings like brightness and contrast?

Press the Menu button to open the OSD. Use the + and - buttons to navigate. The first tier options include CONTRAST, BRIGHTNESS, FINETUNE (clock, phase, position), COLOR (red, green, blue), SIZE (aspect ratio), OUTPUT (resolution), AUDIO, OSD (position, timer, transparency), and INFORMATION.

What cables are included in the package?

The package includes: the AT-HD510VGA unit, a 5V power supply, and a user manual. Cables such as VGA, HDMI, or audio cables are not included and must be purchased separately.

Is the device compatible with HDCP?

Yes, it is HDCP 1.1 compliant, which means it can handle encrypted content from sources like Blu-ray players or satellite receivers, as long as the display also supports HDCP.

How do I clean and maintain the scaler?

Unplug the unit before cleaning. Use a soft, damp cloth to wipe the exterior. Do not use any cleaning fluids, sprays, or aerosols as they may enter the unit and cause damage. Avoid excessive humidity and sudden temperature changes.

USER MANUAL AT-HD510VGA Lenexpo

1. Introduction 3
2. Package Contents 3
3. Features 3
4. Specification 3
5. Panel Descriptions 4 5.1 Front Panel 4 5.2 Rear Panel 4
6. OSD Operation 5
7. Activating a VGA output on a Laptop 5
8. Connection Diagram 8 8.1. PC to HDTV Connection 8 8.2. Component to HDTV Connection 8
9. Support Resolution 9
10. Resetting the Unit 9
11. Atlona Product Registration 9
12. Safety Information 10
13. Warranty 11

INTRODUCTION

This Scaler Box is designed to upscale analog video signal from PC/Component source to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p/WUXGA. Besides video upscaling, the scaler box also converts digital/analog audio signal to digital/analog format, then output to HDMI combining with the video, TOSLink (optical fiber), and phone jack (L/R audio) simultaneously. This unit has a comprehensive OSD menu that allows user to select a variety of output resolutions and adjust for best picture quality.

PACKAGE CONTENTS:

• AT-HD510VGA (PC/HDTV to HDMI Scaler) - 5V power supply - User manual

FEATURES:

• HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant. - Local VGA out allows to connect local PC/Component monitor - Scales any PC/HD resolutions to PC (VGA \~ WUXGA)/ HD (480i \~ 1080p) resolutions. - Automatically detect the factory setting of the connected display and output the corresponding resolution and refresh rate, when the NATIVE output is selected. - Provides output picture adjustment on contrast, brightness, hue, saturation, sharpness, RGB (color tone) level and aspect ratio size. - Supports high resolution output (See section "9. Support Resolution" for reference.): PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA. SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p - Supports stereo LPCM analog/digital audio input and stereo LPCM analog/digital output. Simply select among the audio input sources in the OSD menu, then output the audio to HDMI, TOSLink and phone jack simultaneously.

SPECIFICATIONS:

Input ports 1 x VGA, 1 x 3.5mm Phone Jack, 1 x TOSLink (optical fiber) Output ports 1 x HDMI, 1 x 3.5mm Phone Jack, 1 x TOSLink (optical fiber), 1 x VGA (local monitor)

Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL certified)

Dimensions (mm) 154(D) x 100(W) x 25(H)

Weight(g) 340

Chassis Material Aluminum

Silk Skin Color Black

Operating Temperature Operating from 0°C \~ 48°C

PANEL DESCRIPTION

1. Front Panel

1. Connect the D-Sub (15-pin) VGA port to local PC/Component monitor.
2. VGA input: Connect the VGA input to the VGA/Component output port of your source equipment.
3. Audio Input: Connect the PC 3.5mm phone jack input port to the analog audio output port of your source equipment.
4. TOSLink (optical fiber) Input: Connect the optical input port to the digital audio output port of your source equipment.
5. Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.

2. Rear Panel

1. HDMI Output: Connect the HDMI output port to the HDMI input port of your display such like HDTV.
2. TOSLink (optical fiber) Output: Connect the optical output port to the digital audio input port of your amplifier.
3. Audio Output: Connect the PC 3.5mm phone jack output port to the analog audio input port of your equipment.
4. Menu Button: Press the MENU button to bring up OSD operation menu. (See section "6. OSD Operation" for reference.)
5. +/- ButtonV:

The minus (-) button is used to adjust the picture.

In the OSD menu, use the +/- buttons to move up or down the highlight item for selection.

Once the desired option is selected, use the +/- buttons to toggle between setting values.

OSD OPERATION

1 st Tier Option 2 nd Tier Option Adjustment
CONTRAST - 0 ~ 100 of Contrast Level
BRIGHTNESS - 0 ~ 100 of Contrast Level
FINETUNE	3 + 6 ( &/ 2 &.9 ( 57, &/+2 5, =2 1 7$)	0 ~ 100 of the Scaler's Pixel Alignment0 ~ 100 of Clock Adjustment0 ~ 100 of the Signal's Vertical Position0 ~ 100 of the Signal's Horizontal P
COLOR - RED	- GREEN- BLUE- EXIT	0 ~ 100 of Red Color Level0 ~ 100 of Green Color Level0 ~ 100 of Blue Color LevelBack to 1st Tier
SIZE - FULL		/ OVERSCAN / UNDERSCAN / LETTERBOX / PANSCAN
OUTPUT	- NATIVE / VGA / SVGA	/ XGA / SXGA / UXGA / 480i / 480p/720p@60Hz /1080i@60Hz / 1080p@60Hz / 576i /576p /720p@50Hz / 1080i@50Hz /1080p@50Hz / WXGA / WSXGA / WUXGA
AUDIO - HDMI / EAR PHONE / OPTICAL
OSD	- HPOSITION- VPOSITION- TIMER- BACKGROUND- EXIT	0 ~ 100 of OSD Horizontal Position0 ~ 100 of OSD Vertical Position0 ~ 100 of OSD Existing Time (sec.)0 ~ 100 of OSD Transparent LevelBack to 1st Tier
INFORMATION - SOURCE (Input Interface)		INPUT (Input Resolution)OUTPUT (Output Resolution)VERSION (Firmware Version

ACTIVATING A VGA OUTPUT ON A LAPTOP

Most laptops have the VGA output disabled by default. In order to use the Atlona converter, the user would have to enable it.

There are 2 configurations:

A) Mirror mode. In this mode, your desktop (or screen) is duplicated on the second display, so your audience sees what's on your screen. For example, use Mirror mode if you're recording ideas as people mention them during a brainstorming session and you want participants to see what's being recorded. The main downside of this mode is that instant message pop-ups, e-mail notifications, and other potentially annoying messages appear on the screen. Also, if you browse for a file or switch between programs, your audience will see these actions on the second display.

Note: Most laptops have the VGA output disabled by default. The user would have to press a combination of buttons to enable it.

1. On your laptop's keyboard, find the key marked "FUNCTION" or "Fn" (usually on the lower left corner of the keyboard).
2. Then, search for a key that has either the letters "CRT/LCD" or a little monitor icon. Most often, it will be in the top row of keys marked F1 through F12, but not always.
3. When you have located the keys, press the FUNCTION key and then the LCD/CRT key that you located before at the same time. It might take a couple of seconds for the computer to react.
4. This should toggle the screen image through a cycle like this: Image on Laptop Screen → Image on Projector → Image on Both (to go from one mode to another, you would have to simultaneously press the Function key and LCD/CRT at the same time)

B) Extended mode.

In this mode, you extend your mobile PC screen space by using an additional display (whether a monitor or a projector screen). You can then use each screen independently. This mode is well suited for presentations because you can display the slides on one screen (usually the projector), and then hide notifications and other miscellaneous messages, and complete other tasks, such as taking notes, on your mobile PC screen. This mode is also very useful when you want to extend your workspace while using your mobile PC at your desk.

Note: Most laptops have the VGA output disabled by default. You would have to make a few adjustments in the video settings to enable the mode.

1. Right-click the desktop of your mobile PC, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, on the Settings tab, click the blue rectangle with the number 2 (which represents the external monitor), and then select the Extend my Windows desktop onto this monitor check box. 3. Under Screen resolution, drag the slider to the right to change the screen resolution of Monitor 2 to 1024 by 768 pixels, and then click OK.

1. When prompted, click Yes.

Note: If your desktop background does not appear on the external monitor, click No, and then repeat step 3 to decrease the screen resolution.

Adjust the position of the monitors

By default, Windows places the second screen to the right of the first (or primary) one. You can change the position of the monitors to reflect their physical position.

1. Right-click the desktop of your mobile PC, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, on the Settings tab, drag the graphical representation of Monitor 2 (the blue box with the number 2 in it) to the left of Monitor 1, and then click OK.
3. When prompted, click Yes.

Adjust your screen settings

When you first enable Extended Desktop mode, your taskbar and any icons on your desktop appear on the mobile PC screen; desktop space without icons appears on the external monitor. You may find it easier to show the taskbar on the external monitor since it is usually the larger of the two screens.

1. On your mobile PC screen, right-click an empty area of the taskbar, and then click Lock the Taskbar.
2. Drag the taskbar to the external desktop and drop it where you want it to appear. You can now take advantage of the extra screen space by dragging program windows to the external monitor. You can also resize windows to stretch across the two screens.

By taking advantage of additional monitors, you can share information with others more effectively when you're giving a presentation and also improve your productivity by extending your workspace when you're using your mobile PC at your desk.

CONNECTION AND INSTALLATION

1. PC to HDTV Connection

1. Component to HDTV Connection

SUPPORT RESOLUTION

	VGA INPUT/OUTPUT HDMI OUTPUT
	PC SD/HD PC
480I/576I (NTSC/PAL) v v
480P/576P v v
720P@(50/60) v v
1080I@(25/30) v v
1080P@(50/60) v v
VGA@(60/72/75/85) v v
SVGA@(56/60/72/75/85) v v
XGA@(60/70/75/85) v v
SXGA@(60/75/85) v v
UXGA@60 v v
WXGA@60(1280x800) v v
WSXGA@60(1680x1050)	v v
WUXGA@60(1920x1200)	v v

Note: If PC connected to the VGA input, local output will only support PC resolutions. If HD/SD source connected to the VGA input, local output will support only HD/SD resolutions.

RESETTING THE UNIT

1. Press and hold "Menu" button for 5 seconds
2. Disconnect power plug from the unit while holding the "Menu" and wait for 5 seconds
3. Connect the power plug back in and continue holding the "Menu" for another 5 seconds
4. Release the "Menu" and allow up to 10 seconds for the unit to connect to the display

ATLONA PRODUCT REGISTRATION

Thank you for purchasing this Atlona product — we hope you'll enjoy it.

We also hope that you'll take a few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you'll receive notification of performance issues and firmware updates.

At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited warranty rights.

To register, go to www.atlona.com/registration

SAFETY INFORMATION

Safeguards

To reduce the risk of electric shock, do not expose this product to rain or moisture.

If the wall plug does not fit into your local power socket, hire an electrician to replace your obsolete socket.

Do not modify the wall plug. Doing so will void the warranty and safety features.

This equipment should be installed near the socket outlet and the device should be easily accessible in case it requires disconnection.

Precautions

FCC regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fires.

In the event of an electrostatic discharge, this device may automatically turn off. If this occurs, unplug the device and plug it back in.

Protect and route power cords so they will not be stepped on or pinched by anything placed on or against them. Be especially careful of plug-ins or cord exit points from this product.

Avoid excessive humidity, sudden temperature changes, or temperature extremes.

Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, and swimming pools.

Use only accessories recommended by ATLONA to avoid fire, shock, or other hazards.

Unplug the product before cleaning. Use a damp cloth for cleaning. Do not use cleaning fluid or aerosols, which could enter the unit and cause damage, fire or electrical shock. Some substances may also mar the finish of the product.

Never open or remove unit panels or make any adjustments not described in this manual. Attempting to do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-HD510VGA. Opening the product will void the warranty.

Do not attempt to service the unit. Instead disconnect it and contact your Authorized ATLONA reseller or contact ATLONA directly.

1. LIMITED WARRANTY

Atlona Technologies warrants that (a) its products (the "Product") will perform substantially in accordance with the accompanying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.

2. CUSTOMER REMEDIES

Atlona Technologies and its suppliers' entire liability and Customer's exclusive remedy shall be, at Atlona Technologies' option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of Customer's receipt. This Limited Warranty is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be warranted for the remainder of the original warranty period or 3 year, whichever is longer.

3. NO OTHER WARRANTIES

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPECIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.

4. NO LIABILITY FOR DAMAGES

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL ATLONA TECHNOLOGIES OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES' AND ITS SUPPLIERS' ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.