Norelco PowerTouch AT814 - Electric razor PHILIPS - Free user manual and instructions

Product Type	Electric Shaver (Tripleheader)
Model	AT815 / AT814 / AT810
Brand	Philips Norelco
Shaving System	Lift and Cut System with individually floating heads
Power Source	Rechargeable Lithium-ion battery
Voltage	Automatic worldwide 100V to 240V AC
Charging Time	1 hour for full charge
Quick Charge	3 minutes for 5-minute shave
Cordless Shaving Time	Up to 50 minutes
Display	LED Multi-Purpose Display: Charging, Full Charge, Low Battery, Quick Charge, Shaver Head Replacement Indicator
Usage	Wet and dry (bath and shower safe, but do not immerse)
Trimmer	Pop-up trimmer for sideburns and mustache
Cleaning	Rinse under hot water; brush provided for thorough cleaning
Replacement Heads	Model HQ8 (replace once a year for optimal performance)
Accessories Included	Charging stand, travel pouch (AT815/AT814), cleaning brush, protective cap
Warranty	2 years limited (excluding cutters and combs)
Money-Back Guarantee	45-day money-back guarantee
Safety	Important safety instructions: keep dry, do not use damaged cord, unplug before cleaning, etc.

Frequently Asked Questions - Norelco PowerTouch AT814 PHILIPS

How long does it take to charge the Philips Norelco PowerTouch AT814?

A full charge requires 1 hour. The shaver then provides up to 50 minutes of cordless use. A quick charge of 3 minutes gives enough power for a 5-minute shave.

Can I use the shaver in the shower?

Yes, the shaver is designed for both wet and dry use. You can use it with shaving foam or gel in the shower or bath. However, do not immerse the shaver in water; it is not fully waterproof.

How do I clean the shaver?

After each use, turn off and unplug the shaver, then open the shaver head assembly and rinse under hot water. Shake off excess water and let air dry. For thorough cleaning, you can remove the cutters and combs and clean them with the provided brush and degreasing liquid (e.g., alcohol).

How often should I replace the shaving heads?

Replace the shaving heads once a year for optimal performance. Use only Philips Norelco HQ8 replacement heads. The shaver head replacement indicator will light up orange as a reminder.

What does the orange blinking light mean?

The orange blinking light indicates low battery (5 minutes or less of shaving time left). When the shaver head replacement symbol lights up orange continuously, it is time to replace the shaving heads.

Is the shaver cordless?

Yes, the shaver is rechargeable and cordless for up to 50 minutes of use. It can also be used while charging with the cord, but the cord is not designed for wet environments.

How do I use the pop-up trimmer?

With the shaver on, push down the spring-release trimmer switch to activate the trimmer. Use downward strokes on sideburns and mustache. Close the trimmer by pressing it back down.

Can I use the shaver while it is charging?

The shaver cannot be used while charging. It must be unplugged to operate. The charging cord is only for charging and should be removed before use.

What is the warranty period?

The Philips Norelco PowerTouch AT814 comes with a 2-year limited warranty covering defects in materials and workmanship. It does not cover cutters, combs, or damage from misuse.

How do I reset the shaver head replacement indicator?

After replacing the shaving heads, press and hold the on/off button for at least 5 seconds until the orange indicator turns off. This resets the reminder.

USER MANUAL Norelco PowerTouch AT814 PHILIPS

Abstract black logo design with curved and angular elements (no text or symbols)

NORELCO

Black and white photo of a Philips Morelco Aquatec electric shaver with three buttons (II, III, IV) on its side (no text or symbols on body)

AT815

AT814

AT810

Rechargeable Cordless

Tripleheader Shaver

Always here to help you

Register your product and get support at

www.norelco.com/register

ENGLISH 4

ESPAÑOL 30

Congratulations on your purchase and welcome to Philips Norelco!

To fully benefit from the support that Philips Norelco offers, register your product at www.norelco.com/register

IMPORTANT SAFETY INSTRUCTIONS

When using an electric appliance, basic precautions should always be followed, including the following:

Read all instructions before using this appliance.

DANGER

To reduce the risk of electric shock:

1. Do not reach for a corded charging stand that has fallen into water. Unplug immediately.
2. Power plug and the accessories connected to it are not for immersion or for use in shower.
3. Do not use an extension cord with this appliance.
4. Always unplug this charging stand from the electrical outlet immediately after use, except when shaver is (re)charging.
5. Unplug and remove power supply cord from charging stand before cleaning.
6. The batteries used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100^ C ( 212^ F) or incinerate.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Close supervision is necessary when this shaver is used by, on, or near children or invalids.
2. Use this shaver for its intended household use as described in this manual. Do not use attachments not recommended by Philips Electronics North America Corporation.

3. Never operate this shaver/charging stand if it has a damaged cord or charging plug, if it is not working properly, if it has been dropped or damaged, or dropped into water while plugged in. For assistance call 1-800-243-3050.

4. Keep the shaver, cord, charging stand and charging plug away from heated surfaces.

5. Never drop or insert any object into any opening.
6. Do not use the adapter in or near a power outlet that contains an electric air freshener to prevent damage to the adapter.
7. Do not charge or plug in shaver/charging stand outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
8. Do not use this shaver with a damaged or broken comb, as facial injury may occur.
9. Always put shaver in charging stand first, attach cord to charging stand, then plug into outlet. Be certain plug is inserted firmly into charging stand up to mark indicated on plug. To disconnect, remove charging plug from outlet.
10. Never put the shaver/charging stand in direct sunlight or store at a temperature above 140^ F ( 60^ C).
11. Keep the charging stand/cord dry at all times. Do not handle with wet hands. Do not store in a damp environment.
12. To prevent possible damage to the cord, do not wrap cord around the shaver or charging stand.
13. Do not attempt to open the appliance to replace the battery.
14. Only use the power plug and other accessories supplied with the shaver.

SAVE THESE INSTRUCTIONS

IMPORTANT: The power plug contains a transformer. Do not cut off the power plug to replace it with another plug, as this will cause a hazardous condition.

PHILIPS

NORELCO

45 - DAY MONEY-BACK GUARANTEE

To enjoy the closest and most comfortable shave from your new Philips Norelco Men's Shaver, the shaver should be used exclusively for 3 weeks. This allows your hair and skin enough time to adapt to the Philips Norelco Shaving System. If, after that period of time, you are not fully satisfied with your Philips Norelco Men's Shaver, send the product back along with dated sales receipt and we'll refund you the full purchase price. The shaver must be shipped prepaid by insured mail, insurance prepaid, have the original sales receipt, indicating purchase price, the date of purchase, and the money-back guarantee return authorization form enclosed. We cannot be responsible for lost mail. The shaver must be postmarked no later than 45 days from the date of purchase. Philips Norelco reserves the right to verify the purchase price of the shaver and limit refunds not to exceed suggested retail price.

To obtain money-back guarantee return authorization form, call 1-800-243-3050 for assistance. Delivery of refund check will occur 6-8 weeks AFTER receipt of refund product.

Table of Contents

Features......8-9

LED Multi-Purpose Display....10

Before First Use....11

Charging....11-13

Recharging....14

Quick Charge 14

Put It To The Test & Shaving Tips......14-15

How to Shave

With An Electric Shaver....15-17

Trimming....17-18

Cleaning....18-23

Replacing the Shaving Heads......23-25

Storage....25-26

Assistance 26

Disposal....27

Accessories 28

Warranty....29

Spanish....30

Features

Lift and Cut System

Shaver Head Assembly

Protective Cap

Individually Floating Heads

Shaver Head Release Button

• Hair Chamber captures shaven hair

Electronic On/Off Button

Shaver Head Replacement Indicator

LED Charge Indicators —

- Battery Charge, Full, Low & Quick Charge Indicators

Pop-up Trimmer

Automatic Worldwide Voltage 100V to 240V AC

Cleaning Brush

Travel Pouch (AT815/AT814)

Charging Stand (AT815/AT814)

Rechargeable - 1-hour Full Charge for up to 50 minutes cordless use

Cordless - To shave without a cord

Full 2-Year Warranty

45-Day Money-Back Guarantee

How the Unique Philips Norelco Lift and Cut Shaving System Makes Close Comfortable:

Pure mechanical diagram showing a lever and gear assembly without any text or symbols

Groove channels beard closer to cutting system

Simple line drawing of a tool interacting with a surface, no text or symbols present

Lifter raises hair Slots to cut long hairs

Diagram showing three stages of hair follicle growth with arrows indicating progression (no text or labels)

s to cut long hairs

Diagram of a mechanical or biological process with three foot-like structures and directional arrows (no text or symbols)

Holes to cut short hairs even closer

LED Multi-Purpose Display

The display provides the following information:

Diagram of a medical or anatomical structure with curved lines and a central star-like pattern, no text or symbols present.

Charging Indicator

-When the shaver is charging, the charging light blinks green.

Diagram of a medical or anatomical structure with a central circular region and curved lines, no visible text or symbols.

Full Charge Indicator

-When the battery is fully charged, the charging light lights up green continuously. After approximately 30 minutes the charging light goes off to save energy.

Diagram of a medical or anatomical structure with curved layers and a central star-like shape, no text or symbols present.

Low Battery Indicator

-When the battery is almost empty (5 or less shaving minutes left), the charging light blinks orange. When you turn the shaver OFF the charging light continues to blink orange for a few seconds.

Quick Charge Indicator

-When you charge the empty battery, the charging light alternately blinks orange and green. After approximately 3 minutes, the charging light continues to blink green.

- The shaver now contains enough energy for a 5-minute shave.

Diagram of a medical device with a circular inset showing internal components (no text or symbols)

▶ Shaver Head Replacement Indicator

-Once a year, depending on your shaving behavior, the shaver head replacement symbol will light up orange continuously, as a reminder to replace the shaving heads.

Before First Use

Charge the shaver before you start using it (see 'Charging'). Make sure the shaver is switched off before you start charging it.

Important

Only use the power cord provided to charge the shaver.

The power plug transforms 100-240V AC to less than 24V DC.

Charging

Charging or recharging at temperatures below 40^ F/4,5°C or higher than 95^ F/35°C adversely affects lifetime of batteries.

If the shaver is subjected to a major change in temperature, pressure or humidity, let it acclimatize for 30 minutes before using.

Charging or recharging requires one full hour.

A fully charged shaver has a cordless shaving time of up to 50 minutes.

When charging shaver for the first time or after a long period of non-use, charge until the charging light lights up green continuously.

Do not charge shaver in a pouch.

Charging with a Cord

Illustration of a hand holding a curved cable with an arrow indicating direction (no text or symbols)

1 Connect cord directly to shaver and connect the charging plug into any 100V to 240V AC outlet. Use only the power cord provided.

An adaptor plug may be necessary for charging plug usage in some foreign countries. Use an attachment plug adaptor of the proper configuration for the power outlet.

The charging plug will automatically convert to work on 100V to 240V AC systems.

Diagram of a medical or anatomical structure with curved layers and a central star-like shape, no text or symbols present.

The display on the shaver will indicate shaver is charging.

2 Charging and recharging requires a full 1 hour. A fully charged shaver has a cordless shaving time of up to 50 minutes.

Diagram of a medical or anatomical structure with a central circular region and an electrical symbol (no text or labels)

When the battery is fully charged, the charging light lights up continuously.

After approximately 30 minutes, the charging light goes out to save energy.

Charging in Charging Stand (AT815/AT814)

Illustration of a remote control device with a black arrow pointing to the base (no text or symbols)

Always place shaver in stand in an upright position making sure charging contacts in bottom of stand fit into recess in bottom of shaver.

Always remove shaver from stand by lifting straight up. Do not tilt shaver.

1 Phe shaver in charging stand and connect the small plug of cord to charging stand. Connect the charging plug into any 100V to 240V AC outlet. Use only the power cord provided.

An adaptor plug may be necessary for charging plug usage in some foreign countries. Use an attachment plug adaptor of the proper configuration for the power outlet.

The charging plug will automatically convert to work on 100V to 240V AC systems.

Diagram of a stylized human head with a star-shaped symbol inside, no text or labels present

The display on the shaver will indicate shaver is charging.

2 Charging and recharging requires one full hour. A fully charged shaver has a cordless shaving time of up to 50 minutes.

Diagram of a medical or anatomical structure with curved layers and a central circular feature (no text or symbols)

When the battery is fully charged, the charging light lights up continuously.

After approximately 30 minutes, the battery symbol goes out to save energy.

Recharging

1 R-harging requires 1 hour.

Recharge when the charging light on the shaver display blinks orange.

Quick Charge

When you charge the empty battery, the charging light alternately blinks orange and green. After approximately 3 minutes, the charging light continues to blink green. The shaver now contains enough energy for a 5-minute shave.

Put It To The Test & Shaving Tips

21 Day Trial and Conversion Process. It is a fact that your skin and beard need time to adjust to a new shaving system.
Use your new shaver exclusively for 3 weeks to fully enjoy the closeness of a Philips Norelco shave.

At first you may not get as close a shave as you expect, or your face may even become slightly irritated. This is normal since your beard and skin will need time to adjust. Invest 3 weeks and you'll soon experience the full joy of your new shaver.

Stick with it! If you alternate shaving methods during the adjustment period, it may make it more difficult to adapt to the Philips Norelco shaving system.

If you are still not convinced after 21 days, Philips Norelco will refund you the full purchase price as long as the request is received within 45 days of purchase.

How To Shave With An Electric Shave

Simple line drawing of a showerhead spraying water into a container (no text or symbols)

This symbol on the shaver indicates that the shaver can be used in both the bath and shower.

The shaver will not operate while power cord is connected to an electrical outlet.

For hygienic reasons, the shaver should only be used by one person.

Use this shaver for its intended household use as described in this manual.

▶ Shaving with a clean face gives the best results.

Shaving

Illustration of a person performing a facial expression with a tool, no text or symbols present

1 Turn shaver ON by pressing the on/off button once. Shave against the direction of beard growth using circular movements.

2 Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press shaver to skin so the floating heads can follow the contours of your face. DO NOT press too hard. Too much pressure can pinch the skin into the combs.

3 T h shaver OFF by pressing the on/off button once.

4 Clean the shaver after each use (see chapter 'Cleaning').

5 Put the Protective Cap on the shaver to protect shaver heads.

Wet Shaving

You can also use the shaver on a wet face with shaving foam or gel.

Illustration of a person applying facial massage or pressure to the neck area (no text or symbols)

1 Apply some water to your skin.

Illustration of a person applying product to their face with a sponge (no text or symbols)

2 Apply shaving foam or gel to your skin.

3 Rinse the shaving unit under the tap to ensure that the shaving unit glides smoothly over your skin.

4 Press the on/off button once to switch on the shaver.

Illustration of a person using a device to clean water from a pipe (no text or symbols)

5 Move the shaving heads in circular movements over your skin.

NOTE: Rinse the shaver under the tap regularly to ensure that it continues to glide smoothly over your skin.

6 Turn shaver OFF, dry your face and thoroughly clean the shaver after each use (see chapter ‘Cleaning’).

NOTE: Make sure you rinse all foam or gel off the shaver.

7 When shaver is thoroughly dry, put the Protective Cap on the shaver to protect heads.

Trimming

To groom sideburns and moustache:

1 T h shaver ON.

Diagram of a device with an arrow indicating direction, no visible text or symbols

2 Push down spring-release trimmer switch.

The trimmer can be activated while the shaver is running.

Line drawing of a person's face with a hand holding an earpiece, no text or symbols present

3 Hold trimmer as shown and move in downward strokes with gentle pressure.

4 Close trimmer by pressing trimmer down.

5 T h shaver OFF.

Cleaning

Always clean your shaver after each use.
Always switch shaver OFF, unplug and remove power cord before cleaning.
Never clean, remove or replace head assembly while motor is on.
Do not apply pressure to combs. Do not touch shaving heads with hard objects as this may dent or damage precision-made slotted combs.
Do not use shaver if combs are damaged or broken. Facial injury may occur.
Do not use compressed air, abrasives, scourers or aggressive liquids such as gasoline or acetone to clean the shaver.

Cleaning the Shaving Unit

The shaving heads may be quickly cleaned after each use by rinsing with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.

Regular cleaning guarantees better shaving results.
Do not immerse shaver in water.
While rinsing shaving heads, water may drip out of the base of shaver. This is a normal occurrence.

1 Always turn shaver OFF, unplug from outlet and remove power cord from shaver.

Diagram of a mechanical component with internal gears and arrows indicating motion (no text or symbols)

2 Press the Shaver Head Release Button to open the Shaver Head Assembly.

Illustration of a medical procedure showing a needle inserted into a catheter or tube (no text or symbols present)

3 Clean inside shaving heads and hair chamber by running under hot water.

Illustration of a mechanical device dispensing liquid into a housing (no text or symbols visible)

4 Clean outside of Shaver Head Assembly by running under hot water.

Close the Shaver Head Assembly and shake off excess water.

Be careful not to hit the shaving unit against anything while shaking off excess water.

6 Open Shaver Head Assembly again and leave open to air dry.

NOTE: Do not wipe or dry the shaving heads with a towel or tissue. This could damage the shaving heads.

If you used foam or gel to shave, make sure to rinse all of it off to prevent residue build-up from clogging shaving heads.
If the shaving unit becomes detached from the shaver, you can easily reattach it.
You may also clean the hair chamber without water by using the supplied brush.

Extra-thorough Cleaning Method

Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.

1 T-shaped shaver OFF, remove the charging plug from the outlet and power cord from the shaver.

Diagram of a mechanical device with internal components and directional arrows indicating motion (no text or symbols)

2 Press the Shaver Head Release Button to open the Shaver Head Assembly.

Illustration of a mechanical component with an arrow indicating direction (no text or symbols)

3 Pull the shaving unit off the shaver.

4 Turn the lock counterclockwise to unlock (A) and remove the retaining frame (B).

Diagram of a mechanical component with an upward arrow indicating motion or force (no text or symbols)

5 Remove and clean one set of cutters and combs at a time.

Illustration of a hand using a tool to press or install a mechanical component (no text or symbols visible)

6 Separate the cutter from the comb and clean it with the short bristled side of the brush supplied.

Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.

Illustration of a hand using a pipette to clean a circular object (no text or symbols visible)

7 Clean the inside and outside of the comb with the brush supplied.

For optimum performance, shaver cutters and combs should be cleaned in a degreasing liquid (e.g. alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.

Mechanical assembly diagram showing a gear and cam mechanism (no text or labels)

8 Replace the set back into the Shaver Head Assembly.

Make sure that the two pointy edges of the head fit exactly into the recesses.

9 Repeat the process for the other two sets of cutters and combs.
10 Replace the frame and turn the lock clockwise until it locks into place.
11 Insert the notch of the shaving unit into the slot in the top of the shaver (1) and then close the shaving unit (2).

NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked.

12 Put the Protective Cap on shaver to protect heads.

After Each Use: Trimmer

Diagram of a device with a black arrow indicating direction, showing internal components (no text or symbols)

1 T h shaver OFF.

2 Push down spring-release trimmer switch.

Illustration of a hand using a tool to lift a mechanical component (no text or symbols visible)

3 Clean trimmer with the short-bristled side of the brush every time you use it. Brush up and down along the trimmer teeth.

4 Lubricate the trimmer teeth with one drop of mineral oil every 6 months.

Close trimmer by pressing trimmer down.

Replacing the Shaving Heads

Replace the shaving heads once a year for optimal shaving results.
Replace damaged or worn shaver heads with model HQ8 Philips Norelco shaving heads only.

Shaver Head Replacement Indicator

Illustration of a hand holding a small object with a circular icon showing a skull and arrow (no text or symbols)

The shaver head replacement indicator symbol will light up orange continuously to remind you to replace your shaving heads.

Tian shaver OFF, remove the charging plug from the outlet and power cord from the shaver.

Diagram of a mechanical device with internal components and directional arrows (no text or labels)

2 Press the Shaver Head Release Button to open the Shaver Head Assembly.

Diagram of a mechanical component with an arrow indicating direction, no text or symbols present

3 Pull the shaving unit off the shaver.

4 Turn the lock counterclockwise to unlock (A) and remove the retaining frame (B).

Diagram showing a molecular structure with a checkmark and a hand holding a container (no text or symbols present)

5 Remove the shaving heads and place the new shaving heads in the shaving unit.

Make sure that the two pointy edges of the head fit exactly into the recesses.

place the frame and turn the lock clockwise until it locks into place.
7 Insert the notch of the shaving unit into the slot in the top of the shaver (1) and then close the shaving unit (2).
8 Press and hold the on/off button for at least 5 seconds to reset. The orange shaver head replacement indicator symbol will go out.

NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked.

This shaver has no other user-serviceable parts. For assistance call 1-800-243-3050.

Storage

Be sure shaver is turned off. Remove cord from outlet and shaver before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.
Do not wrap power cord around shaver when storing.
Store cord in a safe location where it will not be cut or damaged.

Do not place or store shaver where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.
Put the Protective Cap on shaver to protect heads.

Assistance

For assistance, visit our website:

www.philips.com/support or call toll free 1-800-243-3050

Online information is available 24 hours a day, 7 days a week.

Disposal

This Philips Norelco shaver contains a rechargeable lithium-ion battery which must be disposed of properly.

Contact your local town or city officials for battery disposal information or call 1-800-822-8837 or www.rbrc.com for battery drop-off locations.

For assistance, visit our website, www.philips.com/support or call toll free: 1-800-243-3050.

Accessories

Replacement Heads Model HQ8 - For maximum shaver performance, replace your Philips Norelco shaving heads once a year.

Philips Norelco Shaver Accessories may be purchased at a store near you, or on our website www.philips.com/store

FULL TWO YEAR WARRANTY

Philips Electronics North America Corporation warrants each new Philips Norelco Product, Model AT815/AT814/AT810 (except cutters and combs) against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.*

NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

In order to obtain warranty service, simply go to www.philips.com/norelco or call 1-800-243-3050 for assistance. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty.

NOTE: No other warranty, written or oral, is authorized by Philips Electronics North America Corporation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you.

* Read enclosed instructions carefully.

Manufactured for:

Philips Consumer Lifestyle

A division of Philips Electronics North America Corporation

P.O.Box 10313, Stamford, CT 06904

This symbol on the product's nameplate means it is listed by Underwriters' Laboratories, Inc.

Norelco, Tripleheader, Lift and Cut, and North America Corporation.

are registered trademarks of Philips Electronics

is a trademark of Philips Electronics North America Corporation.

PHILIPS is a registered trademark of Koninklijke Philips N.V.

Pure mechanical diagram showing a lever and gear assembly without any text or symbols

Pure diagram of a mechanical or electrical component without any text, numbers, or symbols

Diagram showing two black rod-like structures interacting with a surface, one with an arrow indicating direction (no text or symbols)

Diagram of a mechanical or biological process with three legs and rods, no visible text or symbols

Diagram of a medical or anatomical structure with curved lines and a central star-like pattern, no text or symbols present.

Diagram of a medical or anatomical structure with concentric curves and a central circular region, no text or symbols present.

Diagram of a medical or anatomical structure with curved layers and a central star-like shape, no text or symbols present.

Illustration of a hand holding a curved object with an arrow indicating direction (no text or symbols)

Diagram showing a stylized smile inside a curved shape with a power button above (no text or symbols)

Diagram of a medical or anatomical structure with a central circular region and curved lines, no visible text or symbols.

Simple line drawing of a medical or laboratory device with a downward arrow indicating force or movement (no text or symbols)

Diagram of a medical or anatomical structure with curved layers and a central star-like shape, no text or symbols present.

Diagram of a human body with a highlighted circular region and a power button, no text or symbols present

Recarga

1 L'ecarga demora 1 hora.

Simple line drawing of a showerhead spraying water into a container (no text or symbols)

Illustration of a person applying facial care to another person's face, separated by a diagonal line (no text or symbols)

Illustration of a person's face with a finger pointing to the cheek area (no text or symbols)

Illustration of a person applying product to their face, no text or symbols present

Illustration of a person using a tool to interact with a bundle of noodles or containers (no text or symbols visible)

Mechanical component diagram showing a lever mechanism with an arrow indicating motion (no text or symbols present)

Line drawing of a person holding an ear with a small object nearby (no text or symbols)

Diagram of a mechanical or biological structure with internal components and directional arrows (no text or symbols)

Illustration of a mechanical device pouring liquid into a curved component (no text or symbols visible)

Illustration of a mechanical device pouring liquid into a housing (no text or symbols visible)

Two-panel diagram showing mechanical assembly steps: top panel shows internal gear with rotation arrow, bottom panel shows cross-section of a device (no text or symbols)

Diagram of a mechanical component with an upward arrow indicating motion or force (no text or symbols present)

Illustration of a hand using a tool to press a mechanical component (no text or symbols visible)

Illustration of a hand using a pipette to clean a circular object (no text or symbols)

Diagram of a mechanical component with a magnified view showing internal structure (no text or symbols)

Mechanical component diagram showing a lever mechanism with an arrow indicating motion (no text or symbols present)

Illustration of a hand using a tool to press or install a mechanical component (no text or symbols visible)

Diagram of a mechanical device with internal components and directional arrows (no text or symbols)

Diagram of a mechanical component with an arrow indicating direction, no text or symbols present