SND-1011 - Security Camera SAMSUNG - Free user manual and instructions
Find the device manual for free SND-1011 SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera (Dome) |
| Brand | Samsung |
| Model | SND-1011 |
| Resolution | 1280 x 720 (HD) |
| Image Sensor | 1/4" CMOS |
| Lens Type | Fixed focal length, 3.6mm |
| Night Vision | IR LEDs, up to 15m range |
| Video Compression | H.264, MJPEG |
| Network Interface | RJ45, 10/100 Ethernet |
| Power Supply | DC 12V or PoE (IEEE 802.3af) |
| Power Consumption | Max 5W |
| Dimensions (WxHxD) | 130 x 90 x 70 mm |
| Weight | 0.35 kg |
| Housing Material | Metal, vandal-resistant |
| Weatherproof Rating | IP66 (outdoor use) |
| Operating Temperature | -10°C to 50°C |
| Motion Detection | Yes, configurable |
| Supported Protocols | TCP/IP, HTTP, DHCP, RTSP, etc. |
| Video Output | IP stream (network) |
| Included Accessories | Mounting bracket, screws, power adapter |
Frequently Asked Questions - SND-1011 SAMSUNG
How do I reset the Samsung SND-1011 to factory defaults?
Press and hold the reset button on the camera for about 10 seconds using a paperclip. The camera will reboot with factory settings.
What power supply is required for the SND-1011?
The camera supports both DC 12V (1A recommended) and PoE (Power over Ethernet) 802.3af. Use a compatible power adapter or a PoE switch.
How can I view the camera remotely?
Ensure the camera is connected to your network. Use Samsung's SmartView software or a web browser to access the camera's IP address. Configure port forwarding for remote access.
Is the SND-1011 suitable for outdoor use?
Yes, the camera has an IP66 weatherproof rating, making it suitable for outdoor installation. Ensure the cable connections are sealed.
How do I adjust the camera's motion detection settings?
Access the camera's web interface via a browser. Go to the 'Event' or 'Motion' tab and configure sensitivity, area, and schedule. Save changes.
What is the default username and password?
The default credentials are 'admin' for username and 'admin' for password. Change them after first login for security.
Why is my camera showing no image?
Check network connections, power supply, and that the camera is properly installed. Ensure your browser supports H.264 streaming. Try rebooting the camera.
Can I record video from the SND-1011?
Yes, you can record to a network video recorder (NVR) or use a microSD card if the camera supports it (check specifications). Alternatively, use software recording on a PC.
How do I mount the camera?
Use the included mounting bracket. Drill holes for screws, attach the bracket to the wall or ceiling, then secure the camera onto the bracket. Adjust the angle as needed.
What is the maximum cable length for PoE?
For PoE, the maximum cable length is 100 meters (328 feet) using CAT5e or higher ethernet cable. For longer distances, use a PoE extender.
User questions about SND-1011 SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SND-1011 - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SND-1011 by SAMSUNG.