Frequently Asked Questions - ADPU 5300 IX WHIRLPOOL
How do I install the dishwasher?
Ensure the appliance is placed on a flat surface. Connect the water inlet hose to a 3/4 inch tap and the drain hose to a siphon or standpipe. Plug into an earthed wall socket. Slide the appliance into place and level it by adjusting the feet.
What is the best way to load the dishwasher?
Place plates in the lower basket facing the centre, cups and glasses on the upper basket. Put cutlery in the cutlery basket with handles down. Use the adjustable shelves for bulky items and avoid blocking the spray arms.
Why are my dishes not drying properly?
Check that you are using a rinse aid and that the level is adequate. Select a program with a higher drying phase or activate the extra drying option. Also ensure that the dishes are not loaded too closely, allowing air circulation.
How do I clean the filter and spray arms?
Turn off the appliance and remove the lower basket. Unscrew the sump filter by rotating it counterclockwise. Rinse it under running water with a soft brush. For the spray arms, gently pull them upwards to detach and rinse the nozzles. Replace the parts securely.
What type of detergent and rinse aid should I use?
Use a dishwasher detergent in powder, gel or tablet form, preferably with a low phosphate composition. For rinse aid, use a liquid product designed for dishwashers and adjust the dosage according to the water hardness. Never use hand-washing dish soap.
How do I set the water softener level?
Refer to your water hardness value. Press the Eco button and hold it for 3 seconds, then use the program selector to choose the appropriate level. Confirm by pressing the Start button. The default level is suitable for most households.
The dishwasher won't start. What should I check?
Ensure the door is completely closed and that the Child Lock is not activated. Check that the appliance is connected to the power and that the water tap is open. If you see an error code, see the manual and reset the machine by unplugging it for a minute.
How can I reset the dishwasher after an error?
Press and hold the Start/Reset button for about 5 seconds until the lights stop flashing. This cancels the current program. Wait for the drain pump to finish, then select a new program. If the error persists, consult the troubleshooting section.
How to maintain the dishwasher to prevent odors?
Clean the filter regularly and leave the door slightly ajar after each cycle. Run an empty maintenance program with a dishwasher cleaner or a cup of white vinegar every two months. Make sure the gaskets are wiped with a damp cloth.
Are spare parts available and how can I get them?
Yes, Whirlpool provides genuine spare parts for up to 10 years after the model's discontinuation. You can order them from authorised service centres or online by referencing the model number ADPU 5300 IX. The appliance is designed for reparability.
USER MANUAL ADPU 5300 IX WHIRLPOOL
