HDRULT-1616 - AV Extension Smart-AVI - Free user manual and instructions

Product Type	HDMI Matrix Switch over Cat5e/6
Model	HDRULT-1616
Brand	Smart-AVI
Number of Inputs	16
Number of Outputs	16
Maximum Distance	425 ft (130 m) over Cat5e/6
Video Resolution	1080p HD
Supported Audio	Multi-channel digital audio
Additional Signals	Ethernet, IR, Power over HDBaseT (PoH)
Control Methods	Front panel, RS-232, TCP/IP (NET-IP-Pro), SmartControlPro software
Dimensions (W x H x D)	17 x 1.75 x 10 in (approx., rack mount 1U)
Weight	Approximately 8 lbs (3.6 kg)
Power Supply	AC 100-240V, 50/60Hz internal
Power Consumption	Less than 50W (typical)
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	10% to 85% RH, non-condensing
Compliance	CE, FCC, RoHS
EDID Management	Learn EDID from monitor via RS-232
Cleaning Instructions	Wipe with dry or slightly damp cloth; avoid liquids

Frequently Asked Questions - HDRULT-1616 Smart-AVI

What is the maximum distance I can run HDMI over Cat5e/6 with the HDRULT-1616?

The HDRULT-1616 supports distances up to 425 feet (130 meters) using standard Cat5e/6 cables with HDBaseT technology.

How many inputs and outputs does the HDRULT-1616 have?

It is a 16x16 matrix, meaning it can handle up to 16 HDMI input sources and route them to 16 output destinations.

Can I control the matrix remotely over the network?

Yes, you can use the NET-IP-Pro module for TCP/IP control from anywhere in the world via a web browser, or use telnet for integration.

What control methods are available?

You can control the HDRULT-1616 via the front panel, RS-232 commands, SmartControlPro software (Windows GUI), or TCP/IP with the NET-IP-Pro module.

Do I need separate power for the receivers?

Yes, the HDX-Ultra receivers require 5VDC 2A power adapters (included) to operate. The matrix itself has an internal power supply.

How do I set up the EDID for my displays?

Connect a receiver to output 1, then use an RS-232 terminal to send EDID learn command. The matrix will learn the EDID of the connected monitor for optimal compatibility.

What is the maximum resolution supported?

The HDRULT-1616 supports 1080p HD video resolution over the HDBaseT link.

Does it support audio and other signals besides video?

Yes, it carries multi-channel audio, Ethernet, IR control signals, and power over the same Cat5e/6 cable (PoH - Power over HDBaseT).

Can I mount the HDRULT-1616 in a rack?

Yes, it is rack-mountable in a standard 19-inch rack, occupying 1U of space.

What type of cables are recommended?

Use Cat5e or Cat6 cables for the best performance. For HDMI connections, standard HDMI cables up to 25 feet are recommended.

USER MANUAL HDRULT-1616 Smart-AVI

Smart-AVI SMART AUDIO VIDEO INNOVATION

HDR-ULTRA

HDMI 16x16 Matrix over Cat 5e/6

QUICK INSTALLATION GUIDE

www.smartavi.com

INTRODUCTION

The HDR-ULTRA is a High Definition video router that enables users to route HD signals up to 425 feet over CAT 5e/6 cables, providing the ultimate solution to create clean and efficient video and digital signage systems in configurations up to 16x16.

Pristine high definition video has become the standard for entertainment, video systems and digital signage, but HD video routing has been confined by the necessity of short, bulky and unsightly cables. The HDR-ULTRA, utilizing HDBaseT technology, breaks the distance limits that have tethered users as it facilitates the routing of crystal clear 1080p HD video, multi-channel audio, Ethernet, IR and power up to an incredible 425 feet through the use of inexpensive CAT 5e/6 cables. With unprecedented flexibility and convenience, the HDR-ULTRA is overhauling the old challenges of HD Matrix routers with an elegant and easy-to-install solution.

The HDR-ULTRA can direct as many as 16 HD inputs and 16 HD outputs effortlessly. Routing HD signals across long distances from the user-friendly HDR-ULTRA exponentially increases users' ability to create the ideal digital video and audio experience in any environment.

APPLICATION DIAGRAM

graph TD
    subgraph Smart IR BLASTER
        A["Computer"] -->|25 ft over HDMI| B["Rack Servers"]
        C["Gaming Console"] -->|25 ft over HDMI| B
        D["BluRay Player"] -->|25 ft over HDMI| B
        E["Video Camera"] -->|25 ft over HDMI| B
        F["Signage Player"] -->|25 ft over HDMI| B
        G["RS232, USB Control"] --> H["IR Control"]
        I["TCP/IP Control"] --> J["IR Control"]
    end

    subgraph Control Monitor
        K["Internet"] --> L["SMTCP"]
        M["450 ft over Cat 5e/6"] --> N["Smart IR BLASTER"]
        O["Infrared"] --> P["Smart IR BLASTER"]
        Q["HDMI Input"] --> R["Computer"]
        S["HDMI Output"] --> T["Computer"]
        U["CAT 5e/6"] --> V["Computer"]
        W["RS-232"] --> X["Computer"]
        Y["Video Camera"] --> Z["Computer"]
        AA["Signage Player"] --> AB["Computer"]
    end

    style Smart IR BLASTER fill:#f9f9f9,stroke:#333
    style Control Monitor fill:#f9f9f9,stroke:#333
    style Smart IR BLASTER fill:#e6f7ff,stroke:#333
    style Control Monitor fill:#e6f7ff,stroke:#333

INSTALLATION

graph LR
    A["Smart-AM"] -->|HDR-ULTRA| B["Cat 5e/6"]
    B --> C["HDX-Ultra (RX)"]
    C -->|HDMI| D["Monitor"]
    A -->|HDMI Source| E["User"]

1. Turn off all input devices and displays.
2. Connect the HDMI cables from the input devices and tothe "IN" ports on the HDR-ULTRA matrix.
3. Connect the HDMI cables from the HDMI port of the HDX-Ultra Receivers to the HDMI displays.
4. Connect the RJ-45 port of each HDX-Ultra Receivers to the respective “OUT” ports on the HDR-ULTRA using CAT5e/6 cables.
5. Power on the HDX-Ultra Receivers by plugging in their power adapters (5VDC2A).
6. Connect the power cord and power-on the HDR-ULTRA.
7. Power on the input devices and the displays.

CONTROLLING THE HDR-ULTRA

There are multiple ways to control the HDR8X8/HDR16X16:

• Front panel
• SmartControl software
• RS-232 commands
• TCP-IP module (NET-IP-Pro)

Front Panel

The HDR ULTRA front panel enables one to switch directly from the Matrix without the use of any software. Its LCD (40x4) offers detailed information about the status of the switch at any given moment.

SmartControlPro Software

SmartControlPro is the Windows® GUI application that enables users to control SmartAVI matrixes using graphic user interface without having to write the codes and send serial commands to the devices. The software enables configuration of the size and type of the Matrix, including a preset defined at macro. The software also enables identification by name for each source and display.

RS-232 Commands

There are two primary modes of operation for the RS-232 control of the HDR-ULTRA: Command Mode and Debug Mode. When connecting to the HDR-ULTRA via RS-232, it will start in Command Mode, in which raw commands are allowed to be sent matrix to control its various functions without the use of a menu or prompt. This mode is intended for advanced Debug mode is a more user-friendly way of operating the HDR-ULTRA and it also includes instructional menus.

TCP/IP Control (NET-IP-Pro)

Net-IP-Pro gives the user full control of the matrixes from anywhere in the world through this advanced new web browser software. It enables multiple users to control and configure the Matrix, including names of sources, names of displays, IP address and low level features of the Matrix. The Net-IP-Pro enables the support of telnet for easy integration with other control systems.

LEARNING THE EDID OF THE MONITOR

1. Power on the HDR-ULTRA.
2. Connect CAT5e/6 cable from one of the HDX-Ultra Receivers to the OUT1 of the HDR-ULTRA.
3. Connect a straight-through male-to-female RS-232 cable from the computer to the RS-232 port of the HDR-ULTRA.
4. Run HyperTerminal on your PC (or use the terminal client of your choice).
5. Choose the correct COM port and use the following parameters:

1. Cycle the power of the HDMI (reset) and you should see the following on the screen:

SmartAVI HDMI 16X16 ver 12.06.11#1

1. To enter the Debug Mode Modled on" and hit ENTER. You will see the following prompt:

DBG>

1. Type in "edid" and hit ENTER to go to Manage EDID Manage EDID

EDID>

1. Type in "learn" and hit ENTER to learn the monitor plugged in port 1 port 1

EDID> learn

Successfully learned EDID!