20-0107 - Workbench Biltema - Free user manual and instructions

Product Type	Workbench
Brand	Biltema
Model	20-0107
Material	Metal
Maximum Load Capacity	100 kg
Angle Adjustment	4 levels
Assembly Required	Yes
Safety Warnings	Read manual; do not stand or sit on workbench
Recommended Use	Indoor workshop, DIY projects
Cleaning	Wipe with damp cloth
Included Items	Frame, hardware, assembly instructions

Frequently Asked Questions - 20-0107 Biltema

How do I assemble the Biltema workbench?

Follow the step-by-step instructions in the manual. Use the provided hardware and a standard wrench and screwdriver. Ensure all bolts are tightened securely.

What is the maximum weight the workbench can hold?

The maximum load capacity is 100 kg (220 lbs) when evenly distributed on the work surface.

Can I adjust the angle of the workbench?

Yes, the workbench features 4 angle adjustment levels to tilt the work surface as needed.

Is it safe to stand or sit on the workbench?

No, do not stand or sit on the workbench. Doing so may cause tipping or damage, and it is not designed to support a person's weight.

How should I clean the workbench?

Wipe the metal surface with a damp cloth and mild detergent. Avoid abrasive cleaners or scrubbing pads that could scratch the finish.

What tools are needed for assembly?

A standard wrench and screwdriver are typically sufficient. Check the manual for specific tool requirements.

Can the workbench be used outdoors?

It is recommended for indoor use only. Exposure to moisture and weather may cause rust or damage to the metal components.

Does the workbench have height adjustment?

This model only offers angle adjustment (4 levels). The height is fixed; no vertical adjustment is provided.

Are spare parts available for this workbench?

Contact Biltema customer service or visit their website for spare parts availability. Refer to the manual for part numbers.

How can I ensure the workbench is stable on uneven floors?

The workbench likely has adjustable leveling feet (not explicitly stated). Turn the feet to raise or lower corners until the bench is stable.

USER MANUAL 20-0107 Biltema

ARBETSBÄNK METALL ARBEIDSBENK, METALL TYÖTASO METALLIA ARBEJDSBORD, METAL

Black and white BILTEMA workbench with yellow connectors and metal frame (no text or symbols visible on the equipment itself)

ARBETSBÄNK METALL

NO	FIGURE
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13	[CSXY]
#14	[OSWX]

Montering

Close-up of hands installing or adjusting a metal frame component (no visible text or symbols)

Close-up of a hand using a tool to adjust or install a metal bracket (no visible text or symbols)

Person standing on a metal walkable using a horizontal bar, no visible text or symbols

Two black-and-white photos showing a person operating a mechanical device on a tripod, with no visible text or symbols.

Close-up of a hand pressing a plastic component with an arrow indicating direction (no text or symbols visible)

Close-up of a mechanical component with an arrow indicating upward motion, no visible text or symbols

Vinkeljustering (4 nivåer)

Person operating a mechanical device with lever arms and a stand, no visible text or symbols

Person using a mechanical testing apparatus on a tripod, with motion arrows indicating movement (no text or symbols visible)

Person using a tripod-mounted device with a mechanical component, no visible text or symbols

Person operating a mechanical setup with tripod and clamps (no visible text or symbols)

Justera bänkskivan

Mechanical device with a rotating lever and base, labeled '5.' (no text or symbols on the device itself)

Person using a mechanical bench on a tripod, no visible text or symbols

ARBEIDSBENK, METALL

Sikkerhetsforskrifter

SYMBOL:	FORKLARING
	Les bruksanvisningen.
	Maks. last: 100 kg.
	Ikke stå på arbeidsbenken.
	Ikke sitt på arbeidsbenken.

Før bruk

NO	FIGURE
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13	[205T]
#14	[7T9Y]

Montering

Close-up of hands installing or adjusting a metal frame on a floor (no visible text or symbols)

Close-up of a hand using a tool to adjust or install a metal bracket (no visible text or symbols)

Person using a mobility ladder on a paved outdoor area, no visible text or symbols

Two black-and-white photos showing a person operating a mechanical device on a tripod, with no visible text or symbols.

Close-up of a hand pressing a white plastic component with an arrow indicating direction (no text or symbols visible)

Close-up of a mechanical component with an arrow indicating upward motion, no visible text or symbols

Vinkeljustering (4 nivåer)

Person operating a mechanical testing setup with a tripod stand and lever mechanism (no visible text or symbols)

Person using a mechanical testing setup on a tripod, with upward arrows indicating motion (no text or symbols visible)

Person using a tripod-mounted device with a mechanical component, no visible text or symbols

Person operating a mechanical setup with a tripod-mounted device and clamps (no visible text or symbols)

Justere benkeplaten

Mechanical device with a rotating lever and base mount, labeled '5.' (no text or symbols on the device itself)

Person assembling a mechanical device with a tool, no visible text or symbols

TYÖTASO METALLIA

NO	FIGURE
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13	[BCOT]
#14	[3YSH]

Kokoaminen

Close-up of hands installing or adjusting a metal frame on a table (no visible text or symbols)

Close-up of a hand holding a metal rod with a black clip, against a plain background (no text or symbols visible)

Person standing beside a metal exercise stand on a paved surface (no text or symbols visible)

Two black-and-white photos showing a person using a mechanical device on a tripod, with no visible text or symbols.

Close-up of a hand pressing down on a plastic component with an arrow indicating direction (no text or symbols visible)

Close-up of a mechanical component with an arrow indicating upward motion, no visible text or symbols

Person operating a mechanical device with lever arms and a curved arrow indicating rotation (no text or symbols visible)

Person using a mechanical device on a tripod, with upward arrows indicating motion (no text or symbols visible)

Person using a mechanical device on a tripod, viewed from behind (no text or symbols visible)

Person operating a mechanical device on a tripod stand (no visible text or symbols)

Työtason säätäminen

Mechanical device with a rotating lever and base mount, labeled '5.' (no text or symbols on the device itself)

Person using a mechanical device on a tripod, no visible text or symbols

ARBEJDSBORD, METAL

NO	FIGURE
#1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13	[08CZ]
#14

Montering

Close-up of hands installing or adjusting a metal frame component (no visible text or symbols)

Close-up of a hand using a tool to adjust or install a metal strip (no visible text or symbols)

Person using a mobility ladder on a paved outdoor area (no text or symbols visible)

Two black-and-white photos showing a person using a mechanical device on a tripod, with no visible text or symbols.

Close-up of a hand holding a white 3D-printed block with a black arrow pointing right (no text or symbols visible)

Close-up of a white plastic container with an arrow pointing upward, next to a dark background (no visible text or symbols)

Vinkelindstilling (4 trin)

Person operating a mechanical device with lever arms and a curved arrow indicating rotation (no text or symbols visible)

Person using a mechanical device on a tripod, with upward arrows indicating motion (no text or symbols visible)

Person using a mechanical device on a tripod stand, no visible text or symbols

Person operating a mechanical device with tripod base and clamps (no visible text or symbols)

Mechanical device with a rotating lever and base mount, labeled '5.' (no text or symbols on the device itself)

Person operating a mechanical device with a tool, no visible text or symbols