Dect6000 - Telephone BOSCH - Free user manual and instructions
Find the device manual for free Dect6000 BOSCH in PDF.
| Product Type | DECT Cordless Phone |
| Brand | Bosch |
| Model | Dect6000 |
| Display | Backlit LCD, 1.8 inches |
| Handset Dimensions | 160 x 50 x 30 mm |
| Base Station Dimensions | 110 x 100 x 60 mm |
| Handset Weight | 130 g (including battery) |
| Base Station Weight | 100 g |
| Power Supply | Base: 230V AC, Handset: 2x AAA NiMH rechargeable batteries |
| Range (Indoor) | Up to 50 meters |
| Range (Outdoor) | Up to 300 meters |
| Phonebook Capacity | Up to 100 entries |
| Caller ID | Yes |
| Handsfree Speakerphone | Yes |
| Intercom | Between handsets (multiple handset capable) |
| Battery Life (Standby/Talk) | Up to 100 hours / 10 hours |
| Charging Time | Approximately 15 hours |
| Ringtone Types | 10 polyphonic melodies + 10 monophonic |
| Keypad Backlight | Yes, amber |
| Mounting Options | Desk or wall mount for base |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids. |
| Safety | Low radiation DECT technology. Keep away from water and moisture. |
| Spare Parts & Repairability | Battery pack user-replaceable; base and handset available as spare parts. |
| Additional Features | Ringer off, mute, redial, key lock, eco mode |
Frequently Asked Questions - Dect6000 BOSCH
User questions about Dect6000 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Telephone in PDF format for free! Find your manual Dect6000 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Dect6000 by BOSCH.
USER MANUAL Dect6000 BOSCH
Klantenservice / Customer Support Department
Kapittelweg 10
4827 HG Breda
Nederland
+31 (0)76 5721 399
2In-enuitschakelen(ON/OFF)
EC DECLARATION OF CONFORMITY
Manufacturer Bosch Security Systems B.V.
BU Communication Systems
P.O. Box 90106
4800 RA Breda
The Netherlands
Product(s) Type nr(s)
DECT6000 ATEX Handset LBB 6700/50
DECT6000 ATEX Handset PS LBB 6701/50
DECT6000 ATEX Handset PS with location detection LBB 6702/50
DECT6000 ATEX Standard Handset LBB 6709/50
Telecom requirements
The transceivers described above comply with the essential requirements of the R&TTE directive 1999/5/EC if used for the intended purpose.
Applied standards
Standard Date
| EN 60950 +A1+A2+A3+A4+A11 Safety for ITEEN 41003 Safety for telecom networks | 19971998 |
| ETS EN 301 489-1 EMC common documentETS EN 301 489-6 DECT specific | 20022002 |
| ETS EN 301 406 DECT essential requirements 2001 |
Application, Intended purpose
This kind of radio equipment is a class 1 apparatus and uses the DECT system. It is designed for the use in connection with the DECT6000 on-site paging system. The used DECT transmitter frequencies of the apparatus are harmonised for these services in the European Community.
ATEX Requirements
These products described on previous page are in conformance with the requirements of the ATEX directive 94/9/EC.
Meaning of the Conformity
For the application of the equipment in areas which have a potential explosive atmosphere, the manufacturer declares on his own responsibility that under the claimed type of protection the equipment is in conformance with the relevant European harmonised standards. The equipment may only be used under conditions that are mentioned in the ATEX Type Examination Certificate.
Notified Body
Identification number: 0344
KEMA Quality B.V.
Utrechtseweg 310
PO Box 9035
NL - 6800 ET Arnhem
The Netherlands
Electrical apparatus for potentially explosive atmospheres
Standard EN 50014 1997 (+ amendments) General requirements
Standard EN 50020 2002 Intrinsic Safety “i”.
Standard EN 50281-1 1998 For use in the presence of combustible dust.
Standard EN 60529 2000 (+ amendments) Ingress Protection Degree, IP-code.
EC Type Examination Certificate
KEMA 02ATEX 1303 X
Validity
This declaration is only valid if accompanied with an EC Type Examination Certificate obtained from a Notified Body or from a competent authority in an EU member state.
Quality Assurance
The product is designed and produced by a manufacturing organisation, which is certified on ISO 9001:2000 and ISO 14001:1996 standards. These products are in conformance with the full quality assurance procedures as mentioned in and annex III, IV and VII of the ATEX directive 94/9/EC and annex V of the R&TTE directive 99/5/EC and bears the marking ©344. The number 0344 is the identification number of the KEMA.
Compliance with the requirements of ISO 9001: 2000, ATEX directive and R&TTE directive are assessed and certified by the Notified Body KEMA Quality B.V., Arnhem, The Netherlands.
BU Manager : R. Mulatz Quality Manager : C. van der Velden
Signed : Signed :



For more information visit www.boschsecuritysystems.com
© Bosch Security Systems B.V.
Data subject to change without notice
2003-05|9922 141 81551