M9C6PD - Dishwasher DEXP - Free user manual and instructions

Product Type	Freestanding Dishwasher
Model	DEXP M9C6PD
Place Settings	10
Energy Efficiency Class	A+
Annual Energy Consumption	262 kWh
Water Consumption per Cycle	9.5 L
Noise Level	49 dB
Number of Programs	6
Programs	Eco, Intensive, Normal, Quick, Glass, Rinse
Drying System	Condensation
Adjustable Feet	Yes, 4 adjustable feet
Lower Basket	With foldable tines
Cutlery Basket	Yes, removable
Dimensions (W x H x D)	45 x 85 x 60 cm
Weight	38 kg
Power Supply	220-240 V, 50 Hz, 10 A
Power Consumption	1900 W
Water Supply Connection	Cold water only
Maximum Water Inlet Temperature	60°C
Self-Cleaning Filter	Yes
AquaStop	Yes
Salt and Rinse Aid Indicators	Yes
Delay Start	Up to 24 hours

Frequently Asked Questions - M9C6PD DEXP

How do I install the DEXP M9C6PD dishwasher?

Ensure the dishwasher is level by adjusting the four feet. Connect the water inlet hose to a cold water supply (max 60°C) and the drain hose to a suitable outlet. Plug into a grounded 220-240V outlet. Refer to the installation section of the manual for detailed steps.

What should I do if the dishwasher does not start?

Check that the door is closed properly and the power cord is plugged in. Ensure the water supply is turned on and the circuit breaker has not tripped. If the problem persists, try resetting the appliance by unplugging it for 1 minute.

How do I clean the filter?

Remove the lower basket and unscrew the filter assembly. Rinse it under running water with a soft brush. Make sure to clean both the fine and coarse filters. Reinstall them securely. Clean the filter after every 3-4 cycles for optimal performance.

What are the recommended detergents?

Use dishwasher-specific detergent (powder, gel, or tablets) and rinse aid. For hard water, add dishwasher salt. Follow the dosage instructions on the detergent package. Do not use regular dish soap as it causes excessive foam.

How can I improve drying results?

Ensure rinse aid is filled and the setting is adjusted to a higher level. Use the Intensive or Eco program which has a longer drying phase. Open the door slightly after the cycle finishes to let steam escape. Avoid overloading the rack.

Why is there water left at the bottom after the cycle?

Check if the filter or drain hose is clogged. Clean the filter and inspect the drain hose for kinks. Also ensure the drain hose is not too high (max 100 cm above the floor). A small amount of water in the sump is normal.

Can I wash delicate glassware?

Yes, use the Glass program which operates at lower temperature (around 45°C) and gentler water pressure. Place glasses securely in the upper basket and avoid overcrowding. Use a milder detergent to protect the glass.

How do I adjust the feet?

Turn the adjustable feet at the bottom corners of the dishwasher using a wrench or your hand. Rotate clockwise to raise and counterclockwise to lower. Use a spirit level to ensure the appliance is perfectly horizontal. This prevents leaks and ensures proper operation.

What does the error code E4 mean?

Error code E4 indicates a water inlet issue. Check that the water supply tap is fully open and the inlet hose is not kinked or blocked. Also inspect the filter at the inlet valve. If the problem continues, contact customer service.

How do I maintain the dishwasher?

Periodically clean the spray arms (remove and rinse under water), wipe the door seals with a damp cloth, and run an empty cycle with a dishwasher cleaner every 3 months. Also clean the filter after each use and check the salt and rinse aid levels.

USER MANUAL M9C6PD DEXP

Technical line drawing of a front-loading washing machine with an inset close-up showing internal components (no text or labels)

Регулировка ножек

graph LR
    A["Person mixing water"] --> B["Add water into a container"]
    B --> C["Transfer to a filter with liquid"]
    C --> D["Heating water in a container with liquid"]
    D --> E["Final mixing and washing"]

Illustration of a hand pressing down on a control panel with icons and arrows (no text or symbols)

1

Illustration of a hand inserting a device into a circular component, with no visible text or symbols

2

Illustration of a hand pressing down on a device panel with icons and arrows (no text or symbols)

3

Illustration of a hand pressing down on a kitchen fan with a directional arrow indicating press or action (no text or symbols)

Technical line drawing of a mechanical assembly with gears and a central component (no text or symbols)

Нижняя корзина

Technical line drawing of a mechanical or electrical component with internal channels and structural ribs (no text or symbols)

Diagram of a car chassis with wheels and an arrow indicating motion (no text or symbols)

Line drawing of a shopping cart with wheels and an arrow indicating motion (no text or symbols)

Line drawing of a car chassis with wheels and an arrow indicating motion (no text or symbols)

Technical line drawing of a mechanical cart with wheels and an arrow indicating direction (no text or symbols)

Simple line drawing of a container with a lid and two handles (no text or symbols)

Illustration of hands using a cleaning tool to clean or spray liquid on a surface (no text or symbols)

Technical diagram of a mechanical component with internal parts and directional arrows, no visible text or symbols

Technical diagram of an aircraft carrier with internal components and a magnified inset showing structural details (no text or labels)

Illustration of a hand using a tool to adjust or install a fan component on a tray (no text or symbols visible)

Illustration of hands using a tool to clean or wash a small object on a kitchen sink (no text or symbols)

3