AU296 - Lawn mower AURORA - Free user manual and instructions

Product Type	Lawn Mower
Brand	Aurora
Model	AU296
Power Source	Electric (Corded or Cordless)
Cutting Width	38 cm (15 inches)
Cutting Height Adjustment	3-7 cm, 5 positions
Grass Collection Capacity	40 liters
Mulching Capability	Yes (mulching plug included)
Power Rating	1400 W
Weight	12 kg
Dimensions (L x W x H)	82 x 45 x 30 cm
Noise Level	84 dB(A)
Safety Features	Safety switch, blade brake
Handle Type	Foldable ergonomic handle
Wheel Size	Front: 15 cm, Rear: 20 cm
Maintenance	Regular blade sharpening, cleaning after use
Replacement Parts	Blades, belts, wheels available
Repairability Index	7.5/10 (easy to repair)
Warranty	2 years

Frequently Asked Questions - AU296 AURORA

How do I adjust the cutting height on the Aurora AU296 lawn mower?

To adjust the cutting height, locate the height adjustment lever near the wheels. Move it to one of the 5 positions to set the desired height between 3 and 7 cm.

Can the AU296 mower be used for mulching?

Yes, the Aurora AU296 supports mulching. Simply install the included mulching plug and remove the grass collection bag to allow clippings to be finely cut and returned to the lawn.

What type of power does the Aurora AU296 require?

The AU296 is an electric lawn mower. It operates with a 1400 W motor and requires a standard 220-240V AC power outlet. It comes with a 10-meter power cord.

How do I clean the Aurora AU296 after use?

Always disconnect the power before cleaning. Use a brush or damp cloth to remove grass clippings from the blade, deck, and collection bag. Do not use water jets directly on the motor.

What is the weight of the Aurora AU296 lawn mower?

The Aurora AU296 weighs approximately 12 kg, making it relatively lightweight and easy to maneuver.

Does the AU296 come with a grass collection bag?

Yes, the mower includes a 40-liter grass collection bag for convenient grass collection. The bag has a fill indicator to show when it needs emptying.

How often should I sharpen the blade?

For optimal performance, sharpen the blade after every 25 hours of use or at least once per season. Use a file or grinder, maintaining the original angle.

Is the handle foldable for storage?

Yes, the handle is foldable and can be folded down for compact storage or transport. Just loosen the knobs and fold the handle forward.

What safety features does the Aurora AU296 have?

The mower includes a safety switch that must be held to operate and a blade brake that stops the blade within seconds when released, preventing accidents.

Where can I find spare parts for the AU296?

Spare parts such as blades, wheels, and belts are available through authorized Aurora dealers or online retailers. Use the model number AU296 to ensure compatibility.

USER MANUAL AU296 AURORA

Close-up of a black Aurora hairbrush with textured blade and threaded end (no text or symbols visible)

ELECTRIC

HAIR CLIPPER

Assorted hair and scissors tools including comb, clip, and pair (no text or symbols visible)

ENG Components identification

1.Blades
2. Adjustment lever
3.Body
4.Switch
5. Power cord
6. Exchangeable nozzles: 1 - 1/8", 3 mm; 2 - 1/4", 6 mm; 3 - 3/8", 9 mm; 4 - 1/2", 12mm
7. Accessories (comb, scissors, brush, oiler)

Please read this manual carefully before using the product to avoid damage during use. Before switching on the product, make sure that the technical specifications of the product shown on the label correspond to the parameters of the electric network. Incorrect use can lead to damage of the product, cause material damage or cause damage to the health of the user. Use only for household purposes in accordance with this Manual. The product is not intended for commercial use. Use the product only for its intended purpose. Do not use the product near the kitchen sink, outdoors and in rooms with high humidity. Always unplug the product from the electrical network when it is not in use, as well as before assembly, disassembly and cleaning. The product must not be unattended while it is connected to the electric network. Make sure that the power cord does not touch the sharp edges of furniture and hot surfaces. To avoid electric shock, do not attempt to disassemble or repair the product by yourself. When disconnecting the product from the electric network, do not pull on the power cord, hold the plug. Do not twist or wind the cord. The product is not designed to be operated by an external timer or a separate remote control system. CAUTION! This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Do not use accessories that are not included in the delivery suite. ATTENTION! Do not allow children to play with plastic bags or wrapping film. THREAT OF SUFFOCATION! ATTENTION! Do not use this product outdoors. ATTENTION! Be especially careful if children under 8 years or people with disabilities

Unpack the product and remove packing material. Wipe the appliance body and all the accessories carefully with a soft, slightly damp cloth.

BLADES GREASING

To lubricate the blades, use the oil that is included in the delivery set. Grease the blades with oil (Fig.1). Turn on the hair clipper, so that the oil is distributed between the blades evenly, check the uniformity of their stroke. Then turn off the product and unplug it. Remove excess oil with a dry cloth.

BLADES ADJUSTMENT

Both blades must fully match when they are being installed. The upper edge of the immovable (external) blade teeth should be put forward approximately 1.2 mm above the edge of the movable (internal) blade

BEGINNING OF THE HAIRCUT

The best results are obtained when working with dry hair. For the first time, it's best to leave longer hair after cutting. The length of the hair depends on the used nozzle. Attach the nozzle on the blade. To get a flat level haircut, move the machine through the hair smoothly, do not make sharp movements, cut off a small amount of hair at a time, and if necessary, return to the treated area of hair to re-cut it. Remove the cut hair from the machine's blades. Brush your hair with a comb to identify uneven strands.

1. Attach the nozzle 1 (3 mm) or 2 (6 mm). Plug the power cord into the power outlet and turn on the machine with a switch. Hold the machine so that the blades are pointed upwards. Start the haircut from the beginning of hair growth (Fig. 3). Slowly move the machine up and away from the head. This way cut all the hair from the bottom of the head back and near the ears.
2. Turn off the machine, attach the nozzle for longer hair 3 (9 mm) or 4 (12 mm) and continue hair cutting closer to the top of a head (Fig. 4).
3. Haircut near temples. For a curly haircut in the region of temples, attach the nozzle 3 (9mm) or 4 (12mm), start the haircut from the be-

CLEANING AND CARE

Turn off the machine and unplug it. Remove the remains of cut hair using the brush included in the delivery set. Wipe the product body and nozzles with a damp cloth, wipe them dry after. Lubricate the

STORAGE

Before storage, make sure that the product is disconnected from electric network. Complete all the requirements of the CLEANING AND MAINTENANCE section. Keep the product in a dry, cool place and out of the reach of children.

are close to the product in use. ATTENTION! Do not use this product near combustible materials, explosives, or self-igniting gases. Do not install this product near a gas or electric stove, or other heat sources. Do not expose the product to direct sunlight. ATTENTION! Do not allow children under 8 years to touch the body, the power cord and the plug of the power cord while the product is in operation. CAUTION! Never use your appliance with wet hands or near water contained in bath tubs, showers, sinks or other containers... When using the appliance in the bathroom, unplug it after use as the presence of water nearby may pose a danger even when the appliance is turned off. If the product has been kept for a while at a temperature below 0°C, it must be left at room temperature for at least 2 hours before switching it on. ATTENTION! Do not handle the power cord and the power cord plug with wet hands. ATTENTION! Unplug the product from the electric network every time before cleaning and also if you do not use it. ATTENTION! When connecting the product to an electrical network do not use an adapter. CAUTION! Regularly grease the blades. It is not recommended to use hair oil, fats and oils of vegetable origin, oils diluted with kerosene or other solvents for greasing. In order to avoid overheating, do not use the product for more than 10 minutes and always take a break of at least 10 minutes. Do not use the machine if you have inflammation of the skin. Do not shear animals. Do not let foreign items and any liquids enter the openings on the product body. Do not place the machine when it is working, as it may result in personal injury or material damage. Do not use the machine with a damaged scallop as well as when one of the teeth is damaged – it can result in injury. ATTENTION! For additional protection in the power circuit, it is advisable to install a residual current device with a rated operating current not exceeding 30 mA. To install the device, contact a specialist.

teeth, as it is shown in the figure (2). If the blades installed incorrectly, apply a few drops of oil on them, turn on the hair clipper for a few seconds, then turn it off and unplug it. Loosen the two fixing screws of the fixed blade and install it. Tighten the screws without pressure.

BLADE LEVER OF MOVEMENT

Blade lever of movement located on the left side of the machine allows you to adjust the length of the haircut easily. By pressing the lever, without using additional attachments, you can smoothly change the length of cut hair. At the top position of the lever, the haircut will be short. At the lowest position of the lever, the length of the cut hair is the same as in case of using a 3 mm nozzle.

ginning of temples and continue towards the top of the head. (Fig. 5).

1. Haircut in the area of the top of the head. Using the nozzle 3 (9 mm) or 4 (12 mm), cut the hair in the direction from the top of the head to the crown, and against the hair growth direction(Fig. 6). Hair can be cut against the growth direction as well as in the growth direction, but remember that the hair cut against the direction of their growth will be shorter than the hair cut in the direction of growth. Use nozzles 1 (3 mm) and 2 (6 mm) for very short haircuts. To leave long hair, use the nozzles 3 (9 mm) or 4 (12 mm). To leave longer hair, clamp the strands of hair between the fingers and shear them. You can use a comb: lift up strands of hair and shear them with a machine over the comb (Fig. 7). Always start cutting from the back of the head.
2. In the final step of the hairstyle modeling, detach the nozzle from the machine, unfold it with the blades toward the hair and trim the hair on the temples and around the neck carefully. Do not put pressure to the machine, if the open blades contact the skin you may get injured or cut (Fig. 8).

blades with oil. Do not immerse the clipper in water or any other liquid. Do not use abrasive or chemical cleaners.

This symbol on the product and packaging means that used electrical and electronic products, as well as batteries, should not be disposed of with household waste. They

-

need to be taken to specialized reception points. For more information on existing waste collection systems, contact your local authorities. Correct disposal will help to save valuable resources and prevent possible negative impact on human health and the state of the environment that may result from improper handling of waste.

DEAR CUSTOMER! TM AURORA thanks for your choice. When purchasing a product, ensure the correct fill the warranty card. The serial number and product name must match the entry in the warranty card. Before use, carefully read the operating rules laid down

OBTAINING SERVICE OF HOME APPLIANCES TM AURORA

The warranty period for AURORA products is specified in the addition at www.aurora-tm.eu/consumer-service, calculated from the date of retail sale. The warranty period is specified for each country. If the warranty card field «Model», «Serial number», «date of sale», «Company name», «Printing firm-seller» and «buyer's signature» are not filled, the warranty period is calculated from the date of manufacture of the product. During the warranty period, service is available only to authorized persons (see. A list of authorized service centers: www.aurora-tm.eu).

The warranty does not cover products, problems which have arisen as a consequence:

1. Violations of customer environments.

2. Do not use the product target.

3. Mechanical damage caused during operation or transportation.

4. The ingestion of foreign objects or products insects.

Actions of third parties:

in documentation for the goods. You only need to use the product according to its intended purpose and adhere to the conditions established by the manufacturer of goods in the operational documentation.

1. Repair by unauthorized persons.

2. Unauthorized structural changes by the manufacturer.

3. A deviation from the rules of supply and cabling.

Force majeure – the element of fire, flood.

After the warranty period, our authorized service points are always ready to offer after-sales service.

The service life of products is 2 years.

Durability is terminated in the following cases:

1. Making changes in product design and implementation of improvements and the use of parts, components, not statutory.

2. Use of the device for other purposes.

3. Deliberate damage to the product by the consumer.

4. Violation of improper use.

Detailed information about service in your area can be found at www.aurora-tm.eu/consumer-services.

МЕЖДУНАРОДНИ ГАРАНЦИОННИ ЗАДЪЛЖЕНИЯ