Extreme 1632 - Watch DAVIS - Free user manual and instructions

Product Type	Watch
Brand	Davis
Model	Extreme 1632
Display Type	Digital LCD
Case Material	Resin
Case Diameter	Approx. 45 mm
Case Thickness	Approx. 12 mm
Weight	Approx. 50 g
Water Resistance	30 meters (3 ATM)
Power Source	CR2032 battery
Battery Life	Approx. 2 years
Main Functions	Time, date, stopwatch, alarm, backlight
Time Format	12/24 hour selectable
Alarm Type	Daily alarm with snooze
Stopwatch Accuracy	1/100 second
Backlight	EL backlight
Band Material	Resin
Band Width	20 mm
Clasp Type	Buckle
Care and Cleaning	Wipe with soft cloth; avoid contact with chemicals
Safety	Keep away from strong magnetic fields
Spare Parts and Repairability	Contact authorized dealer for battery replacement or repairs
General Information	Read user manual before use

Frequently Asked Questions - Extreme 1632 DAVIS

How do I set the time on my Davis Extreme 1632 watch?

Press and hold the MODE button until the seconds flash, then press ADJUST to change. Use the LAP/RESET button to move to next setting. Press MODE to exit.

What is the water resistance rating of this watch?

The Davis Extreme 1632 has a water resistance rating of 30 meters (3 ATM), meaning it can withstand splashes and brief immersion, but not swimming or diving.

How do I replace the battery in my watch?

Open the back cover using a small screwdriver, remove the old CR2032 battery, insert a new one with positive side up, and close the cover. Ensure the gasket is properly seated to maintain water resistance.

How do I use the stopwatch?

Press MODE until you reach the stopwatch function. Press START/STOP to begin timing, press again to stop. Press LAP/RESET to record lap times or reset.

How do I set the alarm?

Press MODE until the alarm screen appears. Press and hold ADJUST until the hour flashes, then set the time using LAP/RESET. Press ADJUST to toggle alarm on/off.

What does the backlight button do?

Pressing the LIGHT button activates the EL backlight for a few seconds, allowing you to read the display in low light conditions.

How do I switch between 12-hour and 24-hour time format?

While in timekeeping mode, press and hold ADJUST for 2 seconds. The hour digits will flash. Press LAP/RESET to toggle between 12H and 24H format, then press MODE to save.

What should I do if the display is dim or missing segments?

This usually indicates a low battery. Replace the CR2032 battery as described in the manual. If problem persists, contact customer support.

How do I clean my watch?

Use a soft, dry cloth to wipe the case and band. For stubborn dirt, lightly dampen the cloth with water and mild soap. Avoid solvents or abrasive cleaners.

Is the watch suitable for sports or running?

Yes, it includes a stopwatch and lap timer. However, due to its 30m water resistance, it is not recommended for swimming or heavy sweating. Use the resin band for comfort.

USER MANUAL Extreme 1632 DAVIS

1. Growth 2. Date
2. Start/stop chronograph K. Hour hand chronograph
3. Change of Schuld's mode - L. Muhls Hand & Graphograph
4. Hour hand M. Second hand chroerograph
   B. Minute hand N. 1/20th second hand chronograph

C. Second hand

Please do not adjust the data between 22.00 and 32.00 prices.

Sutter the time

Pull out the crown (1) to position 2, the second hand (C) stops at zero position. Turn the crew until hands (A) and (B) show the contact line and push the crown (1) back to position 3.

Selling the date

Please do not adjust the date between 22.00 and 32.00 o'clock. Because then the movement is

Buy on a crown (1) in position 1. Turn the crown, southern sidewise until 1C4 shoes the

correct date and push the crown 11 bars to position 0.

Using the cherograph

This clinagistic is able to measure and destroy the time in 1/20 seconds until up to max 11 hrs 39 min 38 sec. The reticgrade chronograph 1/20 (N) second keeps continuously for 50 seconds after starting and then stops at 6 position.

Press button (3) to put the watch in the chronograph position. The second hand (C) stops at the 3-second position and changes to the chronograph 1/20 (k) second hand.

Press button (2) to bind the chronograph. The chronograph 1/20 (N) second Pand stops at the 0 second postum 50 seconds after starting. When button (2) is pressed to stop the chronograph, the chronograph 1/20 (N) second hand advances rapidly to display the measured time. Press button (3) to reset the chronograph and the chronograph 1/20 (N) second returns to 0 and the chronograph second (M) returns to 12. Press button (3) again to set the watch in the normal watch India.

Resisting the starting position of the chronograph (incl. after replacing battery)

Put out the crown (1) to position 2. Press button (2) repeatedly until hand (M) points to 12. And press button (3) repeatedly until hand (N) points at 60. Finally push the crown (1) back to position 6. Press button (8) to check that the chronogram hands are read to the right starting position.

Water resistance

This watch is waterproof up to 10 ATM. This means you can eat by swim up to 100 meters with this watch. To guarantee the water resistance of your watch, it is important to have your watch checked by your Dev's Dealer every year.

Deutsch Nederlands

1. Krone G. Denmineter
2. Stellstepp Taste Chromograph 4. Slanderzinger Chromograph

3. ZeltChronograph Modustaste L. Minulanzelder Oronograph
   A. Sündenzüger B. 15grupazeker H. Scherzüger Chronograph N. U20 Gewandazeker Gasograph
   B. Amlus Lücker N. 1.20 Sachanlage C-13 Börd C. Säudekvensen

4. 1980年1月2日

B. Smith paper C. Second version