WAT28498IT - Washing machine BOSCH - Free user manual and instructions
Find the device manual for free WAT28498IT BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Front-loading washing machine |
| Brand | Bosch |
| Model | WAT28498IT |
| Capacity | 9 kg |
| Maximum Spin Speed | 1400 rpm |
| Energy Class | A+++ |
| Dimensions (H x W x D) | 84.8 x 59.8 x 59.0 cm |
| Weight | Approximately 80 kg |
| Power Supply | 230 V, 50 Hz |
| Power Consumption | 2000 W |
| Water Connection | Cold water inlet |
| Noise Level (Wash/Spin) | 54 dB / 74 dB |
| Programs | Cotton, Synthetics, Delicates, Wool, Quick Wash, etc. |
| Special Features | EcoSilence Drive, AquaStop, AntiVibration Design |
| Control Type | Electronic with LED display |
| Drum Material | Stainless steel |
| Maintenance | Clean detergent drawer and door seal regularly; run drum cleaning program |
| Safety Features | Child lock, overflow protection, unbalanced load detection |
| Spare Parts Availability | Genuine Bosch parts available through service centers |
| Repair Indices | High repairability index (typical Bosch) |
Frequently Asked Questions - WAT28498IT BOSCH
How do I install the washing machine?
Remove all packaging and transport bolts. Connect the water inlet hose to a cold water tap with a 3/4 inch thread. Insert the drain hose into a standpipe or sink drain. Level the machine using the adjustable feet and secure them with the lock nuts. Plug into a grounded socket.
What should I do if the machine does not start?
Check that the door is fully closed and the child lock is not active. Ensure the water tap is open and the drain hose is not kinked. Verify the power supply and reset the circuit breaker if necessary.
How do I clean the drum?
Run a drum cleaning program (usually 90°C without detergent) monthly. For residue, use a washing machine cleaner. Leave the door open after each wash to dry the drum.
What does the 'E:30' error code mean?
Error E:30 indicates a water drainage issue. Check if the drain hose is blocked or kinked. Clean the drain pump filter located behind the bottom cover. Also inspect the drain hose for obstructions.
How do I adjust the spin speed?
Select the desired program, then press the spin speed button repeatedly to cycle through available speeds (e.g., 0, 400, 600, 800, 1000, 1200, 1400 rpm). The display will show the selected speed.
Can I use liquid detergent?
Yes, but pour liquid detergent into the detergent drawer compartment labeled 'II' or 'liquid' depending on model. Do not overfill; follow the detergent manufacturer's instructions. Use the liquid detergent dosing aid if provided.
How do I remove the transport bolts?
Use a spanner to unscrew the transport bolts at the back of the machine. Keep the bolts for future moves. After removal, push the blanking caps into the holes to prevent leaks.
What is the maximum load for a quick wash?
For the Quick Wash program (usually 30 minutes), the maximum load is typically 3-4 kg. Overloading can reduce cleaning performance.
How do I enable the child lock?
Press and hold the child lock button (often with a key symbol) for 3 seconds until the indicator lights up. To disable, repeat the same action.
What maintenance is recommended?
Clean the detergent drawer and door seal monthly. Run a drum cleaning cycle quarterly. Check and clean the drain pump filter every 2 months. Leave the door ajar after use to prevent mold.
User questions about WAT28498IT BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WAT28498IT - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAT28498IT by BOSCH.