U-302 - Kettle SANYO - Free user manual and instructions

Brand	Sanyo
Model	U-302
Product Type	Electric Kettle
Material	Stainless Steel
Power Consumption	2000-2200 Watts
Voltage	AC 230-240 V ~ 50Hz
Capacity	1.8 Liters
Cordless Interface	360° Rotation
Heating Element	Concealed
Filter	Built-in
Automatic Shut-off	Yes
Safety Features	Boil-dry protection (automatic shut-off when water boils)
Cleaning Instructions	Descaling with white vinegar recommended
Usage	For heating water only, household use
Base Included	Yes

Frequently Asked Questions - U-302 SANYO

How do I clean the kettle?

Clean the outer surface with a soft damp cloth. For descaling, half fill with water, add 30 ml of white vinegar, boil, let stand for 30 seconds, repeat twice, then rinse thoroughly.

What is the maximum water level?

Do not fill past the MAX level indicated inside the kettle to avoid boiling water ejection.

Can I use the kettle without the lid closed?

No, the kettle will not switch off and will overheat if the lid is not firmly closed. Always ensure the lid is securely closed before operation.

What is the power consumption?

The kettle consumes 2000-2200 Watts at 230-240 V ~ 50Hz.

Is the kettle cordless?

Yes, it features a 360° rotation cordless interface, allowing easy placement on the base.

What is the capacity of the kettle?

The kettle has a capacity of 1.8 liters.

Can I immerse the kettle in water?

No, do not immerse the kettle or base in water or other liquids. Use a damp cloth for cleaning.

What should I do if the kettle does not turn on?

Check that the power cord is properly connected, the base is on a flat surface, and the lid is closed. If it still doesn't work, contact a qualified service engineer.

Is the kettle suitable for commercial use?

No, the kettle is intended for household use only, not for commercial or industrial use.

How do I avoid steam burns?

Avoid contact with steam from the spout or when opening the lid after boiling. Position the lid away from your hand and do not remove the lid while water is boiling.

USER MANUAL U-302 SANYO

Stainless Steel Kettle

Model no:

U302

Power supply:

AC 230-240 V \~ 50Hz

Power:

2000-2200 watt

Black-and-white illustration of a classic metal kettle with a curved handle and spout (no text or symbols)

Instruction Manual

Save these instructions

FOR YOUR SAFETY

- Carefully read these instructions before using your appliance.

- Do not immerse in water or other liquids. Ensure that the appliance does not get wet and do not use with wet hands.

- Keep out of reach of children. This appliance is not intended for use by young children or infirm persons without supervision. Young children must be supervised to ensure that they do not play with the appliance

- Use this appliance only for its intended use. This appliance is intended to heat water only and is for household use only and not for commercial or industrial use.

- No kettle should be left unattended when in use.

- When connecting to the power supply, always ensure the main control switch is in the 'OFF' position. Ensure that the kettle is switched off before removing it from its stand.

- Do not fill the kettle while it is on the base and connected to the mains supply.

- Warning: If the kettle is overfilled, boiling water may be ejected.

- Warning: Avoid contact with steam exiting the spout or when opening the lid after the kettle has recently boiled. Position the lid so that steam is directed away from the handle. Do not remove the lid while water is boiling. Do not touch hot surfaces, use handle.

- Use only genuine attachments supplied by an authorised Service-Dealer. The kettle must only be used with the base supplied.

- This appliance should not be used outdoors, placed near a hot gas or electrical burner or placed in a heated oven.

• If the appliance is to be used by a third party, please supply the instructions with it.
• No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use.

FOR ELECTRICAL SAFETY

• This appliance must be earthed.
- This appliance must be connected to a 230-240V \~ 50Hz mains supply.
- No kettle should be left unattended when in use.
- An appliance dropped or damaged should not be used until examined by a service engineer.
- Do not permit power cord to come in contact with hot objects. A damaged supply cord must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
- Do not attempt to service this appliance yourself. Refer to qualified service personnel.

FEATURES

2000-2200 Watts

1.8 litre capacity

360° rotation cordless interface

Concealed heating element

Built in filter

OPERATING INSTRUCTIONS

- Place the kettle base on a firm, horizontal non-slippery surface. Do not operate the kettle on an inclined plane. Do not move while the kettle is switched on.

Black and white illustration of a classic kettle with a handle and spout (no text or symbols)

- Fill the kettle to the desired level and place on base. Do not fill past the MAX level. Warning: If the kettle is overfilled, boiling water may be ejected. Do not fill the kettle while it is on the base and connected to the mains supply. Do not operate the kettle unless the element is fully immersed.

- Place kettle on base and plug the power cord into the mains outlet.

- Ensure the lid is closed securely and switch on. Indicator light will glow, indicating kettle is heating the water. Kettle will boil and switch off automatically. Warning: The kettle will not switch off and will overheat if the lid is not firmly closed. The kettle can be stopped at any time by manually depressing switch to the off position.

MAINTENANCE AND CLEANING

• Always disconnect from the mains outlet before cleaning or storing.

• To clean the outer surface of the kettle, use a soft damp cloth and dry it afterwards with a dry towel. Do not immerse kettle in liquid.

- DESCALING. In order to retain the performance of your kettle, it is important to periodically remove calcium deposits that may build up inside the kettle. Half fill the kettle with clean water. Add 30 ml of white vinegar and boil. Allow boiled water to stand for 30 seconds. Repeat boil two times. Discard this water. Rinse the inside of the kettle, fill to maximum level with clean water, boil and discard to remove any trace of the vinegar.