SLS 67 - Dishwasher Ariston Thermo - Free user manual and instructions
Find the device manual for free SLS 67 Ariston Thermo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Ariston Thermo |
| Model | SLS 67 |
| Energy Class | A+ |
| Place Settings | 12 |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 50 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Annual Energy Consumption | 290 kWh |
| Water Consumption per Cycle | 12 L |
| Noise Level | 49 dB(A) |
| Number of Programs | 5 (Eco, Intensive, Quick, Delicate, Normal) |
| Safety Features | Child lock, anti-flood system, overfill protection |
| Maintenance | Clean filter regularly, use salt and rinse aid |
| Repairability Index | 8.5 / 10 |
| Spare Parts Availability | Yes, through authorized service centers |
| Installation Type | Freestanding |
| Water Connection | Cold water only, 3/4 inch thread |
| Warranty | 2 years (standard) |
Frequently Asked Questions - SLS 67 Ariston Thermo
How do I start the dishwasher?
Load dishes, add detergent, close door, select program, and press start. Ensure water supply is on.
What should I do if the dishwasher won't start?
Check power supply, door latch, water supply, and that the program is selected. If problem persists, refer to error codes in manual.
Why are dishes not clean after cycle?
Ensure proper loading, adequate detergent, correct program (e.g., Eco for light soil), and that filters are clean. Also check water temperature.
How do I clean the filter?
Turn off dishwasher, remove lower rack, twist and pull out filter assembly, rinse under running water, and replace. Do this monthly.
What is the best program for heavily soiled pans?
Use Intensive program (60-70°C) with increased water pressure and longer wash time. Add extra detergent if needed.
Can I use regular dish soap?
No, use only dishwasher-specific detergent (tablets or powder). Regular soap causes oversudsing and damage.
How do I reset the appliance?
Press and hold the Start/Reset button for 3 seconds or until the display clears. Refer to manual for exact procedure.
What does error code E1 mean?
E1 indicates water filling issue. Check water supply hose for kinks, ensure tap is open, and clean inlet filter.
How do I adjust the rinse aid dosage?
Open rinse aid compartment, turn dial to desired level (1-4). Higher setting for harder water to avoid spots.
Is there a child lock?
Yes, press and hold the Child Lock button (usually indicated by a key icon) for 3 seconds to activate. Repeat to deactivate.
User questions about SLS 67 Ariston Thermo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SLS 67 - Ariston Thermo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SLS 67 by Ariston Thermo.
USER MANUAL SLS 67 Ariston Thermo
Instructions for installation and use
natural_image
Technical line drawing of a multi-tiered mechanical assembly with rollers and housing (no text or symbols)
natural_image
Technical line drawing of a multi-tiered mechanical component with circular holes and a central pin (no text or symbols)
natural_image
Cross-sectional diagram of a mechanical or electrical component with layered springs and internal compartments (no text or symbols)
natural_image
Line drawing of a multi-tiered storage unit with circular plates and layered compartments (no text or symbols)
natural_image
Line drawing of a hand operating a mechanical device with a tool and screw (no text or symbols)
natural_image
Technical line drawing of a multi-tiered kitchen appliance with plates and dish (no text or symbols)
natural_image
Technical line drawing of a mechanical connector with threaded body and side ports (no text or symbols)
natural_image
Mechanical diagram showing a belt drive mechanism with a pulley and rotating wheel (no text or symbols)
natural_image
Technical drawing of a mechanical component with an inset showing a cylindrical part labeled 'C' (no text or symbols present)