SVRR090 - Fan heater SVAN - Free user manual and instructions

Product Type	Fan Heater
Brand	SVAN
Model	SVRR090
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	2000 W
Heating Settings	2 power levels (1000 W / 2000 W)
Fan Only Mode	Yes
Thermostat	Adjustable thermostat
Safety Features	Overheat protection, tip-over switch
Dimensions (W x H x D)	20 cm x 15 cm x 10 cm
Weight	1.0 kg
Noise Level	Approx. 45 dB
Portability	Compact design with carry handle
Cleaning Instructions	Wipe with soft dry cloth; do not use water
Maintenance	Clean air inlet/outlet regularly
Spare Parts Availability	Contact SVAN customer service
Repair Service	Authorized service centers

Frequently Asked Questions - SVRR090 SVAN

How do I turn on the heater?

Plug the heater into a power outlet, set the thermostat to the desired temperature, and select the power level using the mode switch.

What safety features does the SVRR090 have?

It includes overheat protection and a tip-over switch that automatically turns off the heater if it falls over.

Can I use the heater in a bathroom?

No, this fan heater is not designed for use in wet areas like bathrooms. Keep it away from water.

How do I clean the fan heater?

Unplug the heater and allow it to cool. Wipe the exterior with a soft, dry cloth. Do not use water or cleaning agents.

Why does the heater turn off during use?

This may be due to the overheat protection activating. Check if the air inlet/outlet is blocked, or if the thermostat has reached the set temperature.

What is the maximum power consumption?

The maximum power consumption is 2000 W at the highest setting.

Is there a fan-only mode?

Yes, the heater has a fan-only setting for cooling without heat.

How can I adjust the temperature?

Rotate the thermostat knob clockwise to increase the desired temperature, and counterclockwise to decrease it.

Can I leave the heater unattended?

It is not recommended to leave the heater unattended. Always turn it off and unplug when not in use.

Where can I find spare parts or repair service?

Contact SVAN customer service or visit an authorized service center for spare parts and repairs.

USER MANUAL SVRR090 SVAN

To ensure proper use of this appliance and your safety, please read the instruction manual completely before operating this appliance.

CONTENTS

Names of the parts .... 1

Safety warnings 2

Installation instructions 4

Operation instructions....4

Packing and moving....5

Maintenance....5

Defrost....6

Disconnecting the appliance....6

User notifications....6

Troubleshooting tips....7

Specifications and parameters....8

Packing list....9

- Thank for purchasing our products and thank you for placing your confidence in us.

- Please read this manual carefully before using. Follow instructions and keep it for future reference.

- Please follow the operating instructions and safety notices in the manual.

- If any trouble arise, do not fix it yourself or hand it to the after sales service center which has not been authorized. Please contact the local authorized service center.

NAMES OF THE PARTS

Technical diagram of a refrigerator with numbered compartments and airflow indicators

1. Freezer room

2. Lamp and temperature control knob

3. Steel shelf

4. Crisper glass cover

5. Vegetable crisper

6. Door bar

7. Lamp switch

8. The refrigerator you purchased may be improved, which maybe not completely consistent with the manual. However the functions and operating methods will not change. Please feel free to use!

9. If you use the refrigerator for the first time, remove the adhesive tapes of the drawers, balconies, egg tray, and the drain tube plug.
10. Do not pull or push the drawers and balconies fiercely during use in case of damage.
11. Adjusted the temperature control as higher as you could accept, which will save the energy consumption of the refrigerator and your money;
12. Don't open the refrigerator door continually if it is in the normal working situation.
13. Keep the combination of drawers, baskets and shelves of the refrigerator is consistent with its original standard.

SAFETY WARNINGS

For ensure your personal safety, please follow the points below:

1. The circuitry for refrigerator must be isolated. The area of cross section of wire must be larger than 0.75mm ^2 . The power plug should have its own socket, the socket must be ground as adapter may cause the socket to overheat.

2. The voltage and frequency of this product should be 220-240V;50Hz. Contact with the local maintenance station or retailer if the wire is damaged.

3. Do stop the power only by pulling the power plug out of the socket directly but not by the wire.

4. Do not damage the refrigerant circuit.

5. This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

6. Children should be supervised to ensure that they do not play with the appliance.

7. Keep ventilation opening, in the appliance enclosure or in the built in structure, clear of obstruction.

8. Before you throw away your old refrigerator or freezer.

- Take off the doors;

- Leave the shelves in place so that children may not easily climb inside.

1. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. This appliance is intended to be used in household and similar applications such as

-staff kitchen areas in shops, offices and other working environments;

-farm houses and by clients in hotels, motels and other residential type environments;

-bed and breakfast type environments;

-catering and similar non-retail applications.

1. Do not use electrical appliance inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacture.

2. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.

To avoid contamination of food, please respect the following instructions:

-Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.

-Clean regularly surfaces that can come in contact with food and accessible drainage systems.

-Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.
-Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
-Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making icecream and making ice cubes.
-One-, two- and three-star compartments are not suitable for the freezing of fresh food.
-If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.

WARNING: Do not locate multiple portable socket -outlets or portable power supplies at the rear of the appliance.

NOTICE:

1. When gas leaks from its container, don't pull the plug, out or in, for it may arouse sparks and fire calamities.
2. Don't splash water on the rear of the appliance, for it may cause malfunction or electric shock.
3. Don't stor inflammabe materials such as ether, benzene, LP gas and glue etc in the refrigerator.
4. It is better not place object on the top of appliance which is magnetic, heavy, or be filled with water. Electronic components may not work steadily if water gets inside. Do not store object which is costly or impressive to temperature and, e.g. serum, bacterin and so on.
5. The refrigerant of this product is R600a, which is inflammable. So, make sure not to damage the cooling system during the transportation and installation.
6. DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such wastes separately for special treatment is necessary.

USE METHOD AND PRECAUTIONS OF DIFFERENT COMPARTMENTS

TIPS FOR USE OF REFRIGERATOR COMPARTMENT

1. the common refrigerating temperature of food stored in refrigerator is from 4°C to 8°C. In this environment, cooked meat can not be stored for more than 4 days, and fruits and vegetables should not exceed one week at most.

2. The common temperature of the chilling room is from -1 to 4°C, and meat can not be stored for more than 7 days.

3. Meat and seafood need to be packed in different containers and stored for not more than 3 days.
4. Raw food and cooked food need to stored in different containers. In order to prevent bacterial contamination, raw vegetables and fruits should not be exposed to raw meat or fish. Vegetables and fruits should be wrapped by film and stored in the crisper.

INSTALLATION INSTRUCTIONS

1. The refrigerator should be located in a completely flat surface, Leave 5\~10 cm between each side of the appliance and the wall, and leave 30 cm between the top of the appliance and the ceiling.
2. Choose a location which is not exposed to sunlight, high temperature or humid, as humidity may cause stain.
3. Pulled out the bottom panel before installation.
4. The appliance can be adjusted by rolling its two legs in front the bottom when it is unstable. Rolling in clockwise can rise up the machine.
5. The location should be firm and flat. An un-securely position may cause noise and libration: (a) The noise may be increased if the floor is not firm. (b) Put a sheet under the appliance for solving the heat emission if you need to locate it onto a carpet.
6. Make sure the adjustable legs are clung to the floor, and set the appliance slope backward slightly for keeping the doors closed tightly.

OPERATION INSTRUCTIONS

PLACEMENT OF FOOD

1. There should always be some space between items inside for air circulation.
2. Food should be kept in sealed package to avoid becoming dry or with odour.
3. Hot food should be cooled down before placing into the appliance. Otherwise, interior temperature and electronic consumption will increase.
4. Reduce the frequency of door opening can efficiently low down the electronic consumption.

Warning

Do not use any electronic equipment inside the appliance.

INSTRUCTION FOR USAGE

The temperature of refrigerator can be controlled manually by the knob. However, the number shown on the knob does not directly represent the temperature. Instead, the larger the number is, the lower the interior temperature will be. 0 stands for off. 7 stands for the coldest temperature level. The temperature in every apartment will be at the lowest degree under this level, and it probably make it below 0°C in the fridge department, so please choose carefully before you use. Turn the knob to level 4 when it is normal, turn it to the level 4-6 if a lower interior temperature is required; contrarily, lower to
4-1, when a higher one is needed.

PACKING AND MOVING

1. Unpack, repack and carry Please memorize the position of each accessory of the appliance when unpack it, repack the product and check it carefully before transportation.
2. Do not lift or pull the door or the door handle during transportation.
3. When moving, the appliance can not be sloped over 45 degrees (the angle to the vertical direction). Please avoid strong vibration and hit.

MAINTENANCE

The appliance should be maintained and cleaned frequently. For your safety, do please pull the plug out of the socket before the cleaning.

1. Interior maintenance Clean the interior of the appliance with clean water or neutral abluent. Scour it with clean water and wipe it with a piece of dry cloth.
2. Maintenance of door gasket It is easy to damage if the door gaskets are polluted by the stain like oil, sauce and etc., so it is better to clean them carefully.
3. Outer maintenance Wipe the dusty with a piece of dry cloth, clean it with neutral abluentif necessary.
4. The displacement of interior light Uninstall the cover and replace the light with a screwing light (E14, 220V/10W). Consult the following pictures:

1) Move the lampshade 3\~5mm according to arrow point direction.

2) Take out the lamp shade.

3) Rotate and take out the bulb in counterclockwise direction.

DEFROST

The heavy frost will influence the refrigerating of the appliance and increase the energy consumption. Thus, defrosting is needed as the frost is as thick as 5 mm. Processes of the manual defrost are listed as following: take all the food out of the compartment; uninstall the drawers and shelves; unplug the electronic power cord; open the doors and wait for the thaw; wipe up the water with dry cloth.

Do not use any other equipment or method to push the defrost process. It may destroy the cooling system.

DISCONNECTING THE APPLIANCE

After power failure, even in summer, the refrigerator can store food normally in several hours.

1. Discontinuation during power failure After power failure, do not put additional food in the appliance and reduce the frequency of door opening. Make several ices in a container if know the power failure beforehand, and put it in the top of the fridge.
2. Discontinuation during vacation Please fetch out the easy-rot food and the food in fridge before shot vacation. After confirmation, close the door firmly. If have a long vacation, please fetch out all the food and cut off the power. After defrosting, clean up the liner of the appliance and wipeit dry, and leave the door open.
3. Stop using If the refrigerator may be stopped using for a long time, please unplug the outlet and clean up the appliance. The door should be kept open in order to prevent unpleasant smell caused by food leavings.

Attention

In a general condition, do not stop the appliance in case of affecting its life. After unplugging the power, please leave at least 5 minutes before resumption.

USER NOTIFICATIONS

1. Do not splash water on the refrigerator, as it will cause oxidation and malfunction. Electronic component such as on/off button should be wiped dryly.
2. Cleansers such as soap powder, abrasive cleaning powder, alkali cleansers, chemical cloth, thinner, alcohol, acid petroleum product and hot water should not be used to clean the refrigerator as they may damage the painted cover and plastics.
3. Smear can damage the interior plastic component, so wipe it as soon as possible.
4. Please check the points below after maintenance: (1) Is there any damage or loss of the electronic wire? (2) Can the plug be put in the socket reliably and smoothly? (3) Is the plug heating unconventionally?

Warning

Please get rid of the gasket of the door before the disposal. The disposed apparatus should be handled by professional staff, as it may be harmful to the environment.

TROUBLESHOOTING TIPS

1. The refrigerator does not work It may not be connected to the power supply(plug, power cut or fuse); Voltage is too low.
2. The refrigerator does not work efficiently as expected It may be caused by heavy frost, or by warm temperature setting, or by frequently door operating.
3. It makes unusual noise It may be caused by an imbalance or loose ground locating the appliance, or by resonance between the appliance and other ambient objects.
4. The compressor keeps working for a long period The environment temperature may be too high. The doors may be opened frequently or even they are left open. The temperature control knob setting in (4-7) state may increase the working time of compressor.
5. Disgusting odour happens Food with strong odour should be packed tightly before being put inside the appliance. Please check whether there is any deteriorated item or whether the liners are left dirty for a long time.
6. Water leaks from the bottom of the refrigerator The drain tube is jammed. Please use a proper tool to solve it.
7. Heavy frost occurs on the rear of the appliance Putting humid or hot food into the appliance may cause this problem. Or it may be caused by the heavy environment moisture.

The follow cases are not malfunction

1. Moisture may form dew on the outside of the product during the humid season, just get it wiped.
2. The flow of refrigerant through the pipeline coil can cause a bicker.
3. It is normal that the sides of product get warm as a result of the cooling pipeline working.
4. The frame of the appliance will be warm during working by the defrost pipeline inside it.

Please check the points above first. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

SPECIFICATIONS AND PARAMETERS

Climate class		N/ST
Electric shock protection type		I
Capacity (L)	Freezer	18
	Refrigerator	93
Voltage (V)		220-240
Frequency (Hz)		50
Current (A)		0.45
Voice [dB(A)]		≤42
Energy consumption (kW.h/24h)		0.365
Refrigerant		R600a/33g
Weight (Kg)		32
Interior temperature (°C)	Freezer	≤-18
	Refrigerator	0~8
Dimension (mm)	Width	552
	Depth	617
	Height	900

PACKING LIST

	NumberParts
Vagetable crisper	1pcs
Stee Shelf	2pcs
Door bar	3pcs
Crisper glass cover	1copy
Owner's manual	1copy

Note: Products are subject to improve from time to time, any changes in parts without further notice.