F114C1008 - Air-conditioner HONEYWELL - Free user manual and instructions
Find the device manual for free F114C1008 HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Honeywell |
| Model | F114C1008 |
| Cooling Capacity | 10,000 BTU (approx.) |
| Room Size Coverage | Up to 350 sq. ft. |
| Air Flow Rate | 200 CFM (approx.) |
| Modes | Cool, Fan, Dehumidify |
| Fan Speeds | 3 (Low, Medium, High) |
| Thermostat | Digital, remote control included |
| Timer | 24-hour programmable timer |
| Refrigerant | R-410A (environmentally friendly) |
| Noise Level | 52 dB (approx.) |
| Power Supply | 115V, 60 Hz, 10A |
| Power Consumption | 1,200 Watts (approx.) |
| Dimensions (W x D x H) | 18 x 15 x 30 inches (approx.) |
| Weight | 65 lbs (approx.) |
| Filter Type | Washable mesh filter |
| Drainage | Self-evaporative system (most conditions) |
| Installation | Window kit included (slide-out window) |
| Safety Features | Overload protection, auto restart after power failure |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - F114C1008 HONEYWELL
How do I install the Honeywell F114C1008 air conditioner?
The unit comes with a window installation kit. Extend the accordion panels to fit your window, secure them, then place the exhaust hose and attach it to the back of the unit. Ensure the window is closed tightly. Detailed instructions are in the manual.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose must be vented out a window or door to expel hot air. Without it, the unit cannot cool effectively and may overheat.
How often should I clean the air filter?
It is recommended to clean the washable mesh filter every two weeks during heavy use. Slide out the filter, vacuum or rinse with water, and let it dry completely before reinstalling.
What does the error code 'E1' mean on the display?
Error code E1 indicates a sensor problem, likely the room temperature sensor. Turn off the unit, unplug it, wait 10 minutes, and restart. If the code persists, contact customer support.
How do I drain the water from the unit?
In high humidity, the self-evaporative system may not evaporate all moisture. Locate the drain plug at the bottom back, place a pan, and remove the plug to drain. For continuous operation, you can attach a garden hose.
Does the remote control require batteries?
Yes, the remote uses two AAA batteries (not included). Open the battery compartment on the back, insert batteries with correct polarity, and close.
Can I use an extension cord with this air conditioner?
It is not recommended. Use a dedicated 115V outlet. If you must use an extension cord, use a heavy-duty cord rated for 15 amps with a ground plug, and keep it as short as possible.
What is the appropriate room size for this unit?
The Honeywell F114C1008 is designed for rooms up to 350 square feet, making it suitable for medium-sized bedrooms, living rooms, or home offices.
How do I set the timer to turn on the unit?
Press the Timer button on the remote or control panel. Use the +/- buttons to set the desired hours (0-24). The unit will turn on after the set time. To cancel, press Timer again until '0h' appears.
Why is the unit blowing warm air?
Check that the exhaust hose is properly vented outside. Ensure the filter is clean. Also verify that the unit is in Cool mode and the set temperature is lower than the room temperature. If still warm, the refrigerant may be low; contact service.
User questions about F114C1008 HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual F114C1008 - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F114C1008 by HONEYWELL.