KA CFH 2 - Heating KALORIK - Free user manual and instructions

Product Type	Heater
Brand	Kalorik
Model	KA CFH 2
Power Settings	2 (Minimum and Maximum heat)
Safety Tilt Switch	Yes (automatic shut-off when tipped)
Overheat Protection	Yes (fuse isolator)
Cleaning Method	Wipe housing with damp cloth; vacuum grills
Minimum Distance from Walls	50 cm
Minimum Distance from Combustibles	1 m
Usage	Indoor domestic use only
Power Supply	Refer to rating plate on appliance
Not to be Used Near Water	Yes (bath, shower, pool, etc.)
Do Not Cover	Yes (risk of fire)
Automatic Timers/Programmers	Not allowed

Frequently Asked Questions - KA CFH 2 KALORIK

What are the heat settings on the KA CFH 2?

The heater has two heat settings: position 1 for minimum heat and position 2 for maximum heat. Turn the switch to 0 to turn off.

How far should the heater be placed from walls?

The heater should be operated at a minimum distance of 50 cm from any wall or other object. Keep at least 1 meter from combustible materials like curtains.

Can I use the heater in the bathroom?

No, do not operate the heater near baths, showers, washbasins, swimming pools, or any water container. It must be impossible to reach the controls when in contact with water.

What happens if the heater tips over?

The heater is equipped with a tilt safety switch that automatically disconnects the power if it tips over. Simply place it upright and switch it on again.

How should I clean the heater?

Before cleaning, unplug and let it cool. Wipe the housing with a slightly damp, lint-free cloth. For the grills, carefully use a vacuum cleaner. Do not use abrasive pads or immerse in water.

What should I do if the heater overheats?

In case of serious overheating, the overheat fuse isolator will automatically break the power. This fuse must be replaced by a competent qualified service. Do not attempt to reset it yourself.

Can I cover the heater with clothes?

No, never cover the heater. To avoid fire risk, ensure the air inlet and outlet openings are not blocked. Do not place any objects on or against the heater.

Is it safe to use an extension cord or timer with this heater?

No, do not use double adapters, timers, programmers, or any device that automatically turns the heater on. Plug directly into a wall socket.

The heater smells when first used. Is this normal?

Yes, a slight smell may be emitted during first use. Ensure sufficient ventilation. The smell will disappear quickly.

Where should I not place the heater?

Do not place the heater under a power socket. Avoid corners, small volumes, floors, and ceilings. Keep away from inflammable materials and never use near explosive substances.

USER MANUAL KA CFH 2 KALORIK

1. ON/OFF and heat switch
2. Heating tube
3. Reflection board
4. Air outlet grid

P

☐ Please read these instructions carefully before using the appliance.
☐ Check that your mains voltage corresponds to that stated on the rating plate of the appliance.
☐ Do not leave the heater unattended during operation and keep children away.
From time to time check the cord for damages. Never use the appliance if cord or appliance shows any signs of damage but have it checked and repaired by a competent qualified service(*). Should the cord be damaged, it must be replaced by a competent qualified service (*)
☐ Only use the appliance for domestic purposes and in the way indicated in these instructions.
☐ Never immerse the appliance in water or any other liquid for any reason whatsoever. When cleaning the appliance, refer to the instructions in the paragraph "Cleaning and care" because the water penetration in the appliance can be very dangerous.
□ Never use the appliance near hot surfaces.
Before cleaning and when you do not use the appliance, always unplug the appliance from the power supply. Do not attempt to remove the plug from the wall socket with wet hands.
□ Never use the appliance outside and always place it in a dry environment.
☐ Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
☐ Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
☐ No responsibility is accepted if damage results from improper use, or if these instructions are not complied with.
□ Stand the appliance on a stable surface so that it cannot fall.
☐ Do not place the appliance under a power socket. The power socket must not be in the hot airflow of the appliance.
□ Always position the heater in such a way that inflammable materials (such as curtains) cannot be ignited. Ensure at all times that the unit is placed solidly on its base. Make sure that the air inlet and outlet openings are not blocked. To avoid any risk of fire, do not cover the heater (ex. With clothes).
☐ The heater should only be operated at a minimum distance of 50cm from any wall or other object and of 1 meter from combustibles.
☐ Warning: Do not operate the heater near baths, showers, washbasins, swimming pools or any other water container. It must be impossible to reach the commands of your appliance when you are in contact with water.
☐ The temperature of the grids may be very high when the appliance is in use. Avoid contact with the skin.
☐ Do not allow the power cord to touch any hot part of the appliance.
□ Never use the appliance near inflammable or explosive materials.
☐ Do not insert any objects through the grille or into the interior of the appliance.
☐ Do not use double adapters, timers, programmers or other devices that connect the heater automatically.

POSITIONING OF THE APPLIANCE

The heater should only be operated at a minimum distance of 50cm from any wall or other object. Position the air flow in order to optimise the heating of the room. Avoid corners, small volumes, floors and ceilings.

USE

When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure sufficient ventilation. This smell will disappear very quickly.

• Make sure the switch is on position "0".
• Plug in the appliance.
• Switch on the appliance by turning the switch to the desired position. 1 = minimum heat 2 = maximum heat

• To switch off the appliance, turn the switch to 0.

- Your appliance is fitted with two safety devices: the first one disconnects your appliance when it is tilted or tipped. If your appliance falls, switch it off, replace it correctly and switch it on again. The second safety device disconnects the appliance in case of serious overheat. When serious overheat occurs, the overheat fuse isolator will automatically break and cut the power, which can prevent the devices from damage and avoid fires. If this overheat fuse isolator breaks, it should be replaced by a competent qualified service.

- In case your appliance does not work when you switch it on, check that it is correctly positioned.

MAINTENANCE AND CLEANING

• Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely.
• The housing may be wiped with a slightly damp, lint-fee cloth; do not use any abrasive scouring pad or steel wool.
  • The grids are particularly delicate; to clean them you can carefully use a vacuum cleaner.
• When you do not use the appliance, you can cover and place it in a dry environment.

P MODO DE EMPREGO

PENSANDO NA VOSSA SEGURANÇA