G 643-2 - Dishwasher MIELE - Free user manual and instructions
Find the device manual for free G 643-2 MIELE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fully Integrated Dishwasher |
| Brand | Miele |
| Model | G 643-2 |
| Dimensions (H x W x D) | 80.5 cm x 60 cm x 57.5 cm |
| Weight | Approx. 50 kg |
| Power Supply | 230 V, 50 Hz, 10 A |
| Energy Rating | A (original EU rating) |
| Water Consumption | 12 L per wash cycle |
| Noise Level | 48 dB |
| Number of Place Settings | 14 |
| Programs | Intensive, Normal, Eco, Quick Wash, Gentle, Rinse & Hold |
| Features | Salt and rinse aid indicators, adjustable water softener, delay start, child lock |
| Construction | Stainless steel interior, cutlery basket, adjustable upper basket |
| Maintenance & Cleaning | Self-cleaning filter, automatic rinse aid dosage, salt refill indicator |
| Safety | Water protection system (Aquastop), child lock, door lock |
| Spare Parts & Repairability | Standardized spare parts available, door spring, spray arms, drain pump |
| Installation Type | Under counter, fully integrated |
| Color | White / Panel ready (for custom front) |
Frequently Asked Questions - G 643-2 MIELE
How do I start a wash cycle on the Miele G 643-2?
Load the dishwasher, add detergent, close the door, select a program using the rotary dial, and press the Start button. The machine will begin after a short delay.
What should I do if the dishwasher doesn't drain?
Check if the drain hose is kinked or blocked. Clean the self-cleaning filter under the rotor, and ensure the drain pump impeller is free from debris. If the problem persists, consult the manual.
How often should I clean the filter?
The filter should be checked after every wash and cleaned if necessary. A thorough cleaning once a week is recommended to maintain performance.
What does the 'Salt' indicator mean?
The salt indicator lights up when the water softener needs replenishing. Fill the salt compartment with dishwasher salt and then reset the indicator by pressing the corresponding button.
Can I use regular detergent tablets?
Yes, but for best results use Miele branded detergent or any high-quality table with built-in salt and rinse aid. Adjust the water hardness setting accordingly.
How do I adjust the water softener setting?
Refer to the manual: typically, press and hold the Start button for 3 seconds, then use the program dial to set the hardness level (H00 to H04). Confirm with Start.
What is the 'Aquastop' system?
Aquastop is a safety feature that shuts off the water supply if a leak is detected. It prevents water damage and is located in the water inlet hose.
Why are dishes still wet after a cycle?
Ensure you use rinse aid and check the setting. Also, avoid overloading and make sure the spray arms can rotate freely. A high temperature final rinse helps drying.
How do I activate the child lock?
Press and hold the Delay Start button for approximately 3 seconds until the indicator light turns on. The door becomes locked and buttons are disabled.
Where can I find spare parts for my Miele G 643-2?
Spare parts are available through Miele authorized dealers or online retailers. Common parts include spray arms, filters, door springs, and drain pumps. Use the model number for accurate ordering.
User questions about G 643-2 MIELE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual G 643-2 - MIELE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 643-2 by MIELE.