DGSL-12-50-PA - Uncategorized Festo - Free user manual and instructions
Find the device manual for free DGSL-12-50-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact Guided Actuator |
| Stroke | 50 mm |
| Piston Diameter | 12 mm |
| Operating Pressure | 1 to 10 bar |
| Ambient Temperature | -20 °C to 80 °C |
| Weight | Approx. 0.15 kg |
| Function | Linear motion with integrated guide |
| Pneumatic Port | M5 |
| Sealing Material | NBR |
| Body Material | Aluminum alloy |
| Piston Rod Material | Stainless steel |
| Position Sensing | Slot for proximity sensors |
| Protection Class | IP40 |
| Cushioning | Elastomer cushions |
| Lubrication | Not required (self-lubricating) |
| Conforms to | ISO 15552 |
Frequently Asked Questions - DGSL-12-50-PA Festo
What is the operating pressure range for the Festo DGSL-12-50-PA?
The operating pressure is typically between 1 and 10 bar (14.5 to 145 psi).
Can the DGSL-12-50-PA be mounted in any orientation?
Yes, it can be mounted in any orientation. However, ensure that the load is properly supported and the actuator is not subjected to side loads beyond its specification.
Does the DGSL-12-50-PA require lubrication?
No, the actuator is self-lubricating and does not require additional lubrication. Use only dry, filtered compressed air.
What is the maximum force the DGSL-12-50-PA can generate?
At 6 bar, the theoretical force is approximately 68 N (extending) and 57 N (retracting).
What type of sensors can be used with the DGSL-12-50-PA?
It has a T-slot for mounting proximity sensors (e.g., Festo SMT-8 series). Use sensors compatible with the slot dimensions.
What is the maximum operating speed?
The maximum speed depends on load and air supply. Typically, speeds up to 0.5 m/s can be achieved.
How do I adjust the cushioning?
The elastomer cushions are pre-set and not adjustable. For adjustable cushioning, refer to the optional pneumatic cushioning version.
What maintenance is required?
Minimal maintenance is needed. Periodically check for leaks and clean the actuator with a soft cloth. Replace seals if wear is visible.
Can the DGSL-12-50-PA be used in a vacuum environment?
No, it is designed for positive pressure only. Do not use below atmospheric pressure.
What is the warranty period for Festo DGSL series?
Festo provides a standard warranty of 24 months for manufacturing defects. Check with your distributor for terms.
User questions about DGSL-12-50-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DGSL-12-50-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGSL-12-50-PA by Festo.