3741 - Kitchen scale Taylor - Free user manual and instructions

Product Type	Digital Kitchen Scale
Brand	Taylor
Model	3741
Capacity	11 lb / 5 kg
Accuracy	1 g / 0.1 oz
Units	g, kg, oz, lb:oz
Power Supply	1 x CR2032 battery (included)
Auto-Off	After 2 minutes of inactivity
Tare Function	Yes, subtracts container weight
Display	LCD, 1-inch digits
Platform Material	Stainless steel
Housing Material	ABS plastic
Dimensions (L x W x H)	8.3 x 6.3 x 1.2 in / 21 x 16 x 3 cm
Product Weight	11.5 oz / 326 g
Cleaning Instructions	Wipe with a damp cloth; do not immerse
Safety Warnings	Do not overload; keep away from water
Spare Parts Availability	Battery (CR2032) widely available
Warranty	1 year limited warranty
Certifications	CE, RoHS

Frequently Asked Questions - 3741 Taylor

How do I calibrate the Taylor 3741 kitchen scale?

The Taylor 3741 is factory-calibrated and does not require user calibration. If accuracy seems off, ensure the scale is on a flat, stable surface and has a fresh battery.

How do I replace the battery?

Open the battery compartment on the underside of the scale. Remove the old CR2032 battery and insert a new one with the positive side facing up. Close the compartment securely.

What is the tare function and how do I use it?

Tare allows you to zero out the weight of a container. Place the empty container on the scale, press the TARE button, and the display will reset to 0. Then add your ingredients.

What is the maximum weight capacity?

The maximum capacity is 11 lb (5 kg). Exceeding this may damage the scale.

How accurate is the scale?

The scale measures with an accuracy of 1 g or 0.1 oz.

What units can I measure in?

You can switch between grams (g), kilograms (kg), ounces (oz), and pounds+ounces (lb:oz) by pressing the UNIT button.

How long is the warranty?

The Taylor 3741 comes with a 1-year limited warranty against defects in materials and workmanship.

How do I clean the scale?

Wipe the platform and body with a damp cloth. Do not immerse the scale in water or use abrasive cleaners.

What does 'Err' mean on the display?

'Err' indicates overload (weight exceeds capacity) or instability (scale not on a level surface). Remove the weight and place the scale on a hard, flat surface.

Can I use the scale for commercial purposes?

No, this scale is designed for household use only. Commercial use may void the warranty.

USER MANUAL 3741 Taylor

Add & Weigh Kitchen Scale

Thank you for purchasing a Taylor® Kitchen Scale. Your Taylor® scale is an example of superior design and craftsmanship. Please read this instruction manual carefully before use. Keep these instructions handy for future reference.

Before Weighing

The circular dial has two separate sections, one half is printed with pounds/ounces the other kilograms/grams.

1. Place the container on the weighing platform and adjust either the pounds or kilograms scale to zero by simply revolving the dial until the "0" mark is directly in line with the pointer.
2. Tap the weighing container a few times with your fingertips to "settle" the mechanism. Re-adjust to zero if necessary.

Note: Any lightweight container may be used, provided that it is placed on the weighing platform before the dial is set to zero. Equally, large or awkward items such as meat or a food parcel can be placed directly onto the platform.

To Add and Weigh

Put the first item into the container and read the weight. Rotate the dial until the zero mark is once again in line with the pointer. Add your next ingredient. The weight shown will be that of the last ingredient only. Re-zero the dial, and add the next item and so on.

Note: The weighing container may be removed for mixing purposes at any point during the add and weigh program, but if water, eggs or any other item is added, the dial should be re-set to zero when the bowl is replaced on the scale.

Cleaning and Care

1. The weighing container supplied with this scale must not be placed in either a dishwasher or microwave oven.
2. To prevent damage DO NOT:

a. Stand scale or bowl near an oven or other direct source of heat
b. Immerse scale in water
c. Clean with abrasive or chemical agents
d. Allow to come into contact with strongly flavored/colored foods or acids such as citrus fruit, which can cause damage to the plastic surfaces

Note: Where such items are used, it is recommended that the bowl or weighing surface first be lined with greaseproof paper or cling-film and washed/wiped clean immediately afterwards.

1. The outer casing of the scale may be wiped clean with a damp cloth and the weighing container can be washed by hand in hot soapy water.
2. The mechanism does NOT require maintenance of any kind.

Precautions

1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays. Avoid contact with acids, such as citrus juices.
2. Do not tamper with the scale's internal components. Doing so will invalidate the warranty on this unit and may cause damage. The scale contains no user-serviceable parts.
3. Avoid rough treatment. Treat it with care to ensure the best performance.
4. This scale is intended for home/consumer use only. It is not intended for commercial or medical use.
5. This scale is designed to read weights up to 5 lb x 1.0 oz / 2.2 kg x 25 g. To prevent damage, do not place more than 5 lb / 2.2 kg on it.

One (1) Year Limited Warranty

Taylor® warrants this product to be free from defects in material or workmanship (excluding batteries) for one (1) year for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. If service is required, do not return to retailer. Should this product require service (or replacement at our option), please pack the item carefully and return it prepaid, along with store receipt showing the date of purchase and a note explaining reason for return to:

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.shoptaylorusa.com

Email: [e-mail]

There are no expressed warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. For additional product information, or warranty information outside the USA, please contact us through www.shoptaylorusa.com.

©2017 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® is a registered trademark of Taylor Precision Products and its affiliated companies. All rights reserved.

Made to our exact specifications in China.

Not legal for trade.