SIP-HORN - Speaker Monacor - Free user manual and instructions

Product Type	SIP Horn Speaker for VoIP Paging
Dimensions (W x H x D)	300 x 200 x 250 mm
Weight	2.5 kg
Power Supply	PoE (IEEE 802.3af, Class 3)
Audio Output Power	20 W RMS
Frequency Range	300 Hz - 8 kHz
Impedance	8 ohms
Sensitivity (1W/1m)	90 dB
Coverage Angle	90° (H) x 60° (V)
Protection Rating	IP65
Material	ABS plastic (UV resistant)
Mounting	Wall bracket with adjustable angle
Connection	RJ45 (PoE), screw terminals for auxiliary input
Protocol	SIP (RFC 3261), compatible with major VoIP PBXs
Audio Codecs	G.711, G.722, G.729
Features	Integrated amplifier, auto-sensing PoE, remote management, firmware upgradeable
Maintenance	Clean with dry cloth; avoid solvents and water jets
Safety	Use only with PoE switches; do not open unit
Spare Parts & Repairability	No user-serviceable parts; contact dealer for repairs
General Information	Designed for outdoor use, suitable for paging and public address

Frequently Asked Questions - SIP-HORN Monacor

How do I connect the SIP-HORN speaker?

Can I use the speaker without PoE?

What is the maximum cable length from the switch?

How do I configure the SIP settings?

Is the speaker weatherproof?

What audio codecs are supported?

Can I use it for music playback?

How do I reset the speaker to factory defaults?

What is the coverage area of the horn?

Can I daisy-chain multiple speakers?

USER MANUAL SIP-HORN Monacor

2N® SIP Speaker Horn

SIP audio

White megaphone with blue '2N' logo and metal handle (no text or symbols on body)

Installation Manual

Firmware:

Version: 2.8

www.2n.cz

The 2N TELEKOMUNIKACE a.s. is a Czech manufacturer and supplier of telecommunications equipment.

The product family developed by 2N TELEKOMUNIKACE a.s. includes GSM gateways, private branch exchanges (PBX), and door and lift communicators. 2N TELEKOMUNIKACE a.s. has been ranked among the Czech top companies for years and represented a symbol of stability and prosperity on the telecommunications market for almost two decades. At present, we export our products into over 12 countries worldwide and have exclusive distributors on all continents.

2N ^ is a registered trademark of 2N TELEKOMUNIKACE a.s. Any product and/or other names mentioned herein are registered trademarks and/or trademarks or brands protected by law.

2N TELEKOMUNIKACE a.s. administers the FAQ database to help you quickly fin information and to answer your questions about 2N products and services. On www.faq.2n.cz you can find information regarding products adjustment and instructions for optimum use and procedures „What to do if...”.

2N TELEKOMUNIKACE a.s. hereby declares that the 2N product complies with a basic requirements and other relevant provisions of the 1999/5/EC directive. For the full wording of the Declaration of Conformity see the CD-ROM (if enclosed) or website at www.2n.cz.

The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. AI development, production and distribution processes of the company are managed by this standard and guarantee a high quality, technical level and professional aspect of all our products.

Content:

• 1. Product Overview

• 1.1 Components and Associated Products
• 1.2 Terms and Symbols

• 2. Description and Installation

• 2.1 Before You Start
• 2.2 Mechanical Installation
• 2.3 Electric Installation
• 2.4 Product Description

• 3. Function and Use

• 3.1 Configuration
• 3.2 Default Reset
• 3.3 Basic Functions
• 3.4 Downloads

• 4. Technical Parameters

• 5. Supplementary Information

• 5.1 Troubleshooting
• 5.2 Directives, Laws and Regulations
• 5.3 General Instructions and Cautions

1. Product Overview

Here is what you can find in this section:

• 1.1 Components and Associated Products
• 1.2 Terms and Symbols

Basic Properties

2N ^® SIP Speaker Horn is an active protective solution for your premises. Cameras and security systems are passive elements that inform you of any crime committed. Criminals are very proficient in avoiding cameras and cannot be scared off by common alarm systems. Although you are connected to the Alarm Response Centre

(ARC), burglars may cause damage before the police arrives. , 2N® SIP SpeakerHorn however, can help you drive away potential intruders by very loud live announcements, which enhances safety and protection of your property.

2N ^® SIP Speaker Horn provides a clear and loud speech in critical situations. Together with cameras or VMS for remote communication, live announcements help avoid criminal acts. The device speakers/Noninstall: IP-based speakers 2N SIP

enhance camera systems at parking lots, public spaces and industrial objects. They can work as standalone units or be simply interconnected with existing VMS phone systems via IP (VoIP PBX). Thanks to PoE, they can be connected to IP with a single network cable. 2N ^® SIP Speaker Horn can be used for live paging or playing scheduled or pre-startable messages. It is equipped with an automatic audiotesting function, which can check the speakers for proper functions. 2N ^® SIP Speaker Horn makes outdoor spaces or places with critical infrastructure safer.

2N ^® SIP Speaker Horn is a versatile sound transmission system for IP networks. It is designed as a universal VoIP phone with an audio output. It finds a variety of applications – in schools, hospitals, office buildings, hotels, production halls, shopping centres, bus terminals, airports and so on.

2N ^® SIP Speaker Horn can be controlled via a configuration web interface. 2N ^® SIP Speaker Horn communicates with the other audio system components via the SIP Proxy or directly via a specified address.

Advantages of Use

• Clear and loud speech
• Announcement planner
  • ONVIF for easy integration with VMS
• Noise detector
• Easy installation with only one cable (Audio + PoE)
  • VoIP PBX support (SIP)
  • Excellent reliability through automated audio tests
• Integrated administration web server
• Streamed audio support
  • Applicable as standard VoIP telephone/communicator
  • DTMF detection according to RFC2833, in-band and SIP-INFO

Basic Features

• 10/100Base-TX LAN interface
• 24 V DC / 2 A or PoE 802.3af supply
- Integrated 8/25 W amplifier (depending on power supply)

1.1 Components and Associated Products

Basic Unit

Part No. 914422E

White megaphone with blue '2N' logo and metal bracket (no text or symbols on body)

- 2N®SIP Speaker Horn

Power Supply

Part Numbers:9137810091378100E91378100US	PoE injector - without cablePoE injector - with EU cablePoE injector - with US cableFor power supply of intercom via ethernet cable when PoE switch is not available.
Part No. 91341481E	Stabilised 12 V / 2 A power supply needs to be used when no PoE is available.
Part No. 932928	For external power supply of the lock with 12 V AC voltage.

VoIP Telephones

91378357Part No.	Grandstream GXV3240 VoIP video telephoneGXV3240 is the successor to the popular GXV3140 model, which allows comfortable video calls in the IP network. Touchscreen and keyboard control.
91378358Part No.	Grandstream GXV3275 VoIP telephoneGXV3275 is the successor to the popular GXV3175 model, which allows comfortable video calls in the IP network. Touchscreen control.

Accessories

Part No. 914034B/W	Wall-mounted 8 ohm loudspeaker
Part No. 9137410E	External IP Relay - 1 outputStandalone commands sent by Helios IP intercom, which can thus control devices on unlimited distance.
Part No. 9137411E	External IP Relay - 4 outputs, PoEStandalone commands sent by Helios IP intercom, which can thus control devices on unlimited distance.

Part No. 9159014EU/US /UK

ZWIRE ZWIRE® 2.0 Microcontroller ZWIRE® 2.0 Microcontroller

- 2N ^ 2Wire

- (set of 2 adaptors and power source for EU/US/UK)

- The converter allows you to use existing wiring (2 2N 2Wire wires) from your original door bell or door intercom to connect any IP device. You don't have to configure anything, and you only need one unit at each end of the cable and a 2N 2Wire power source connected to at least one of these units.

The unit then provides PoE power not only to the 2N 2Wire second converter, but also to all other connected IP end devices.

Tip

- For more accessories and particular advice please contact your local distributor of 2N products.

1.2 Terms and Symbols

The following symbols and pictograms are used in the manual:

Safety

• Always abide by this information to prevent persons from injury.

Warning

• Always abide by this information to prevent damage to the device.

Caution

- Important information for system functionality.

Tip

- Useful information for quick and efficient functionality.

Note

- Routines or advice for efficient use of the device.

2. Description and Installation

In this section, we describe the product and its 2N SIP Speaker, Wall Mounted installation.

Here is what you can find in this section:

• 2.1 Before You Start
• 2.2 Mechanical Installation
• 2.3 Electric Installation
• 2.4 Product Description

Product Completeness Check

Before installing this product, check whether the product delivery includes:

• 1x 2N®SIP Speaker Horn
• Quick User Manual

Surface Mounting

To mount your unit on a wall or another solid surface 2N SIP Speaker, Wall Mounted use the speaker holder. Fit this holder with screws to keep the device in place. Follow the figure below while drilling the mounting holes.

4,5 13,2 11,9 50 152 193 240

Mounting holes

White megaphone with metal frame and cable, placed on a wooden table against a plain wall (no text or symbols visible)

Speaker Holder

2.3 Electric Installation

Electric Installation Step by Step

It is very easy to connect ^ electrically. Follow the steps below to 2N SIP Speaker Horn avoid equipment damage or electrical injury:

• Connect the additional microphone
• Connect the UTP cable.
• Connect a 24 V power supply (unless PoE is used).

Caution

- Be sure to connect the power surSpeakerthorast SIP 2N step. The same applies to PoE supply from the LAN.

Microphone connection

PWR MIC GND LAN RESET

Microphone connection

LAN Connection

® SIP 8Neaker Horn can be connected to a standard local area network using a LAN interface via the RJ-45 connector on the back panel. Always use CAT-5d or high class cables for reliability reasons.

PWR LAN GND MIC RESET

LAN Connection

The LAN interface is equipped with the Auto MDIX function for automatic straight or cross-over cable detection.

The LAN interface can also be used for the powerSpeaker, Wall Mounted supply through active network elements or injectors meeting the IEEE 802.3af standard.

Note

- With PoE, the integrated amplifier power output is limited to 8 W. To utilise the maximum power output of the amplifier, feed 2N^® SIP from a 24 V DC / 2 A external power supply.Speaker Horn

Caution

• We recommend the use of a LAN surge protection.

Power Supply Connection

® SIP Speaker Horn can be fed using active network elements or PoE injectors via the LAN interface. In case this option is unavailable, use a 24 V DC / 2 A (Part No 914102E) power supply or another power supply on condition that you keep the

nominal values included in the Mechanical and Electrical Parameters subsection. Connect the 24 V DC power supply either to the back panel supply connector a shown on the figure below

PWR GND MIC LAN RESET

Power Supply Connection

Warning

- If you use an adapter other than the recommended one, do not exceed the nominal supply voltage value of 24 V. Also make sure that the supply voltage polarity is correct. Exceeding nominal values and/or incorrect connection may lead to irreversible damage of the equipment.

2.4 Product Description

2N ^® SIP Speaker Horn is an Ethernet audio converter designed for public sound distribution. It is connected to and communicates with the SIP Proxy server via telephone calls. This guarantees compatibility with all SIP-based systems.

Use an integrated web interface for configSIP6ptake2N Horn

Apply the to seleidos AP Networks Scanner 2N connected.

® SIP Speaker Horn

2N ^® SIP Speaker Horn connection panel

PWR LAN GND MIC RESET

® SIP Speaker Horn back panel

Connectors and Controls:

• LAN: 10/100BASE-TX RJ-45 connector
- MIC input - pins for microphone connection
- RESET button
• PWR: 24 V DC / 2 A power supply adapter connector

3. Function and Use

This section provides the basic and extended functions of the 2N SIP Speaker, Wall product.Mounted

Here is what you can find in this section:

• 3.1 Configuration
• 3.2 Default Reset
• 3.3 Basic Functions
• 3.4 Downloads

3.1 Configuration

2N ^® SIP Speaker Horn is configured through an integrated administration web server.

Connect to the SIP Speaker Horn 2N like sure that 2N is powered.Speaker Horn

Description of 2N ^® Helios IP Network Scanner

The purpose of this application is to find the dynamic IP address of 2N ^ SIP Speaker in the local IP network. The application can be downloaded from the 2N w sites www.2n.cz.

1. Run the 2N ^® Helios IP Network Scanner installer.
2. The installation Wizard will guide you through the installation.

2N Helios IP Network Scanner (2.0.0.1.0) Welcome to the 2N Helios IP Network Scanner (2.0.0.1.0) Setup Wizard The installer will guide you through the steps required to install 2N Helios IP Network Scanner (2.0.0.1.0) on your computer. WARNING: This computer program is protected by copyright law and international treaties. Unauthorized duplication or distribution of this program, or any portion of it, may result in severe civil or criminal penalties, and will be prosecuted to the maximum extent possible under the law. Cancel < Back Next >

2N ^® Helios IP Network Scanner Installation Wizard

1. After installing the 2N® Helios IP Network Scanner application, run the application using the Start menu of the Microsoft Windows operating system.

2. Upon launch, the application starts searching the LAN automatically for all ^ SIP Speaker Horn with an assigned or statically set IP address. The devices 2I are then listed in a table.

2N Helios IP Network Scanner (version 2.0.0.1.0) IP Address Serial Number Display name Version 192.168.22.67 52-0523-0197 2N SIP Speaker Hall 1.16.1.309.15 192.168.22.68 52-0469-0009 2N SIP Speaker 1.16.1.309.15 Refresh Browse...

® Helios IP Network Scanner2Window

1. Select the to be SIP Speaker Horn click on it with the right-hand 2N mouse button and select Browse open the web browser window, log in to SIP Speaker Horn and start configuring as described in the Login subsection below.

Login

In the web browser enter the IP address of . SupsSpeakery,Ho2N login screen will be displayed. The default login username and password are as follows:

• Username: Admin
• Password: 2n

If the login screen does not appear, an incorrect IP address was entered into the web browser or the adm ^ SIB Speaker H or server was turned off. If you 2N

are not sure of the IP address of , use SIPsMaker Horn 2N ^® Helios IP Network Scanner application as described in the Description of 2N ^® Helios IP Network Scanner

subsection.Find how to switch on the administration web server in the Administration Web Server Switch-On subsection. Please check the IP address entered, or, if applicable, check the way the IP address was obtained as described at the beginning of subsection .3.1 Configuration

Language Selection

You can select the language using the tag menu in the right-hand upper corner shown in Figure below.

2N SIP Speaker

CZ | EN | DE | FR | IT | ES | RU

Logout

Language Selection

3.2 Default Reset

Factory Default Reset

In some cases, it may be useful to reset the ^ factorSpeakerUH2N SIP

values using the RESET switch on the back panel. Do so, for example, if 2NSIP ceases to respond due to, for example, incorrect LAN settings, LA configuration changes, forgotten password and so on.

LAN Setting Change and Default Reset

2N ^® SIP Speaker Horn is equipped with a RESET button. Press the button shortly (< 1 s) to restart the system without changing configuration.

Follow the instructions below to :identify the current IP address

1. Press and hold the REST button - red LED comes on.
2. Wait until the red and green LEDs on the device come on simultaneously (approx. 20 s).
3. Release the RESET button.
4. The device announces the current IP address via the loudspeaker automatically.

graph LR
    A["Start: ○ ○ ○"] --> B["○ ○ ○"]
    B --> C["Red Circle"]
    C --> D["○ ○ ●"]
    D --> E["Green Circle"]
    E --> F["○ Red Circle"]
    F --> G["End: 5 s"]

    H["Start: ○ ○"] --> I["○ ○"]
    I --> J["○ ○"]
    J --> K["○ ○"]
    K --> L["End: 5 s"]

Hold button RESET

Follow the instructions below to switch on the mode (DHCP OFF):Static IP address

1. Press and hold the REST button.
2. Wait until the red and green LEDs on the device come on simultaneously (approx. 20 s).
3. Wait until the red LED goes off (approx. 5 s).
4. Release the RESET button.
5. The following network parameters will be set after restart:

• IP address: 192.168.1.100

• Network mask: 255.255.255.0
- Default gateway: 192.168.1.1

Follow the instructions below to switch on the mode (DCHP ON): Dynamic IP address

1. Press and hold the REST button.
2. Wait until the red and green LEDs on the device come on simultaneously (approx. 20 s).
3. Wait until the red LED goes off (approx. 5 s).
4. Wait until the green LED goes off and the red LED comes on again (another 5 s).
5. Release the RESET button.

graph LR
    A[" "] --> B[" "]
    C[" "] --> D[" "]
    E[" "] --> F[" "]
    G[" "] --> H[" "]
    I[" "] --> J[" "]
    K[" "] --> L[" "]
    M[" "] --> N[" "]
    O[" "] --> P[" "]
    Q[" "] --> R[" "]
    S[" "] --> T[" "]
    U[" "] --> V[" "]
    W[" "] --> X[" "]
    Y[" "] --> Z[" "]
    AA[" "] --> AB[" "]
    AC[" "] --> AD[" "]
    AE[" "] --> AF[" "]
    AG[" "] --> AH[" "]
    AI[" "] --> AJ[" "]
    AK[" "] --> AL[" "]
    AM[" "] --> AN[" "]
    AO[" "] --> AP[" "]
    AQ[" "] --> AR[" "]
    AS[" "] --> AT[" "]
    AU[" "] --> AV[" "]
    AW[" "] --> AX[" "]
    AY["cca 20 s"] --> Z
    Z -->|5 s| X
    X -->|5 s| Y
    Y -->|5 s| Z

Hold button RESET

Follow the instructions below to :reset the factory default values

1. Press and hold the REST button.
2. Wait until the red and green LEDs on the device come on simultaneously (approx. 20 s).
3. Wait until the red LED goes off (approx. 5 s).
4. Wait until the green LED goes off and the red LED comes on again (approx. 5 s).
5. Wait until the red LED goes off (another 5 s).
6. Release the RESET button.

graph LR
    A["○ ○ ○"] --> B["○ ○"]
    B --> C["○ ○"]
    C --> D["○ ○"]
    D --> E["○ ○"]
    style A fill:#fff,stroke:#000
    style B fill:#fff,stroke:#000
    style C fill:#fff,stroke:#000
    style D fill:#fff,stroke:#000
    style E fill:#fff,stroke:#000

Hold button RESET

Operational Status Signalling

2N ^® SIP Speaker Horn signals acoustically changes of and transitions between variable operational statuses. There are different tone combinations for each status change. Refer to table below for the list of signals.

Tones Meaning
	User activatedUsed when the user activation code is entered. The activation code is used for user (telephone directory position) activation. Refer to the Telephony Directory subsection for activation code settings (Configuration Manual).
	User deactivatedUsed when the user deactivation code is entered. The deactivation code is used for user (telephone directory position) deactivation. An inactive user cannot be called, but the call may be forwarded to the user substitute if predefined. Refer to the Telephony Directory subsection for deactivation code settings (Configuration Manual).
	Calendar activatedUsed for calendar activation. Use this function, for example, to enable user group ringing in an office. Refer to the Scheduler subsection for activation code settings (Configuration Manual).
	Calendar deactivatedUsed for calendar deactivation. Use this function, for example, to disable user group ringing in an office and forward the call(s) to a predefined telephone number (reception desk or user mobile phones). Refer to the Scheduler subsection for deactivation code settings (Configuration Manual).
	Call prolongation confirmation signallingThe maximum call duration is set in for secure 20% S10rn reasons; refer to Miscellaneous subsection (Configuration Manual).
	Internal application launchedUpon power up Speaker, 2N SIP Speakerinternal application is launched. A successful launch is signalled by Horn this tone combination.
	Connected to LAN, IP address receivedWhen the internal application has been launched, 2N SIP Speaker Horn logs into the LAN. A successful login is signalled by this tone combination.
	Disconnected from LAN, IP address lostThis tone combination signals that the UTP cable has been disconnected from .2N SIP Speaker Horn
	Invalid telephone number or invalid switch activation code2N SIP Speaker Horn allows you to store an extension number or enter the switch opening code. If the number/code is invalid, this tone combination is used.
	Default reset of network parametersEnter the default reset code for the network parameters within a 30-second timeout after power up. Refer to Factory Default Reset with Static IP Address and Factory Default Reset with DHCP Client ON for details.Call end advance signallingYou can set a call time limit in to avoid Speaker Horn blocking. Push a button on your VoIP telephone to prolong the call.
	Connected call when calling from a telephone to 2N SIP Speaker HornWhen calling from your VoIP telephone to , you get Speaker Horn a short call connection tone.

Software

2N ^® Helios IP network scanner 3.0.4

Mechanical and Electrical Parameters

• Dimensions: diameter 237 mm, length 309.6 mm
• Weight: 2,3 kg
• Color: grey
• Operating temperature: -30 °C - +60 °C
• Protection: IP66
  • Installation: U-type holder made of stainless steel
  • External power supply: 24 V DC / 2 A
  • LAN supply: PoE IEEE 802.3af
  • LAN connection: RJ-45 connector on back panel, 10/100BASE-TX with Auto MDIX function
• Supported protocols: SIP2.0, SIPS (TLS), DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, SRTP, TFTP, HTTP, HTTPS, Syslog, ONVIF
• Operating temperature: -30 °C to 60 °C (-22 °F to 140 °F)
• Operating humidity: 10 to 85% (not condensing)
• Permitted temperature range for product transport: -30 °C to 60 °C (-22 °F to 140 °F)
• Loudspeaker impedance: 8 Ω
  • Frequency range:
  • 400 Hz - 7.5 kHz (-10 dB)
  • 275 Hz - 12 kHz (-20 dB)
  • Harmonic distortion: 0,05 % @ 1 kHz
  • Signal-to-noise ratio: 91 dB
  • Sound Pressure Level:
  • 110 dB (for 1 kHz, distance 1 m)
• 124 dB (SPLmax)
  • Output Power: 8 W (PoE) / 25 W (24 V)
  • Audiocodecs: G.711 (PCMA, PCMU), G.722, L16 / 16 kHz

• 400 Hz - 7,5 kHz (-10 dB)
• 275 Hz - 12 kHz (-20 dB)

5. Supplementary Information

Here is what you can find in this section:

• 5.1 Troubleshooting
• 5.2 Directives, Laws and Regulations
• 5.3 General Instructions and Cautions

5.1 Troubleshooting

For the most frequently asked questions refer to .faq.2n.cz

5.2 Directives, Laws and Regulations

Europe

2N ^® SIP Speaker Horn conforms to the following directives and regulations:

Directive 1999/5/EC of the European Parliament and of the Council, of 9 March 1999 - on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity

Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits

Directive 2004/108/EC of the Council of 15 December 2004 on the harmonisation of the laws of Member States relating to electromagnetic compatibility

Commission Regulation (EC) No. 1275/2008, of 17 December 2008, implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment

Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

Regulation (EC) No. 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No. 793/93 and Commission Regulation (EC) No. 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC

Directive 2012/19/EC of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment.

Industry Canada

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if no installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

5.3 General Instructions and Cautions

Please read this User Manual carefully before using the product. Follow all instructions and recommendations included herein.

Any use of the product that is in contradiction with the instructions provided herein may result in malfunction, damage or destruction of the product.

The manufacturer shall not be liable and responsible for any damage incurred as a result of a use of the product other than that included herein, namely undue application and disobedience of the recommendations and warnings in contradiction herewith.

Any use or connection of the product other than those included herein shall be considered undue and the manufacturer shall not be liable for any consequences arisen as a result of such misconduct.

Moreover, the manufacturer shall not be liable for any damage or destruction of the product incurred as a result of misplacement, incompetent installation and/or undue operation and use of the product in contradiction herewith.

The manufacturer assumes no responsibility for any malfunction, damage or destruction of the product caused by incompetent replacement of parts or due to the use of reproduction parts or components.

The manufacturer shall not be liable and responsible for any loss or damage incurred as a result of a natural disaster or any other unfavourable natural condition.

The manufacturer shall not be held liable for any damage of the product arising during the shipping thereof.

The manufacturer shall not make any warrant with regard to data loss or damage.

The manufacturer shall not be liable and responsible for any direct or indirect damage incurred as a result of a use of the product in contradiction herewith or a failure of the product due to a use in contradiction herewith.

All applicable legal regulations concerning the product installation and use as well as provisions of technical standards on electric installations have to be obeyed. The manufacturer shall not be liable and responsible for damage or destruction of the product or damage incurred by the consumer in case the product is used and handled contrary to the said regulations and provisions.

The consumer shall, at its own expense, obtain software protection of the produce. The manufacturer shall not be held liable and responsible for any damage incurred as a result of the use of deficient or substandard security software.

The consumer shall, without delay, change the access password for the product after installation. The manufacturer shall not be held liable or responsible for any damage incurred by the consumer in connection with the use of the original password.

The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff.

Electric Waste and Used Battery Pack Handling

Do not place used electric devices and battery packs into municipal waste containers. An undue disposal thereof might impair the environment!

Deliver your expired electric appliances and battery packs removed from them to dedicated dumpsites or containers or give them back to the dealer or manufacturer for environmental-friendly disposal. The dealer or manufacturer shall take the product back free of charge and without requiring another purchase. Make sure that the devices to be disposed of are complete.

Do not throw battery packs into fire. Battery packs may not be taken into parts short-circuited either.

2N

2N TELEKOMUNIKACE a.s.

Modřanská 621, 143 01 Prague 4, Czech Republic

Phone: [phone], Fax: [phone]

E-mail: [e-mail]

Web: www.2n.cz

v2.8