AXSSO-FD2 - Car electronic accessory Axxess - Free user manual and instructions

Product Type	Stop/Start Override Interface
Brand	AXESS
Model	AXSSO-FD2
Application	Ford Bronco Sport (2021), Escape (2020-2021), Explorer (2020-2021), Ranger (2019-2021), Transit (2020-2021), Transit Connect (2019-2021)
Function	Disengages the factory STOP/START feature and keeps it disengaged after ignition cycle
Compatibility	Works with factory or aftermarket radio
Installation Type	Plug and play, no wiring required
Installation Location	OBD2 connector under driver's side dashboard
Programming Required	Yes, via Axxess Updater software on Windows 10 computer
Included Components	AXSSO-FD2 interface, AXSSO-FD2 harness
Required Tools & Accessories	Zip ties, cutters, USB Micro-B cable (sold separately, part AXUSB-MCBL)
Power Source	From vehicle OBD2 connector
Dimensions	Approximately 2.5 x 1.5 x 0.8 inches (estimated)
Weight	Approximately 0.2 lbs (estimated)
Operating Temperature	-40°F to 185°F (-40°C to 85°C) (estimated automotive grade)
Security	Disconnect negative battery terminal before installation
Maintenance	No regular maintenance required
Repair & Spare Parts	Contact Metra tech support for replacement or repair
Warranty	Refer to manufacturer
Certifications	MECP recommended installation

Frequently Asked Questions - AXSSO-FD2 Axxess

What does the AXSSO-FD2 do?

The AXSSO-FD2 disengages the vehicle's factory STOP/START feature and keeps it disengaged even after the ignition is cycled. It does not affect any other vehicle functions.

Which vehicles are compatible with the AXSSO-FD2?

It is designed for select Ford models: Bronco Sport (2021), Escape (2020-2021), Explorer (2020-2021), Ranger (2019-2021), Transit (2020-2021), and Transit Connect (2019-2021). Always verify your vehicle's compatibility before purchase.

Is the AXSSO-FD2 easy to install?

Yes, installation is plug and play. No cutting or splicing of wires is required. Simply connect the harness to the OBD2 connector under the dashboard and plug in the interface. Zip ties are recommended to secure the harness.

Do I need to program the AXSSO-FD2?

Yes, initial programming is required using the Axxess Updater software on a Windows 10 computer. You select your vehicle's year, make, and model, and the software configures the interface. A USB Micro-B cable (sold separately) is needed.

Can I re-enable the STOP/START feature after installation?

Yes, you can temporarily re-engage the STOP/START feature by pressing the factory STOP/START button. However, it will be disabled again after the ignition is cycled.

Will the AXSSO-FD2 work with an aftermarket radio?

Yes, it is compatible with both factory and aftermarket radios. No additional integration is needed.

What tools are needed for installation?

You will need zip ties and cutters for them, plus a USB Micro-B cable (AXUSB-MCBL) for programming. A negative battery terminal disconnect is also recommended for safety.

What do I do if the AXSSO-FD2 stops working?

First, ensure all connections are secure and the vehicle battery is healthy. If the issue persists, contact Metra Tech Support at 1-386-257-1187 or email [e-mail] during business hours.

Is the AXSSO-FD2 safe to use?

Yes, when installed correctly, it is safe. It does not alter any critical safety systems. However, always disconnect the negative battery terminal before installation to prevent short circuits.

Can I use the AXSSO-FD2 on vehicles not listed in the applications?

It is only verified for the listed Ford models. Using it on other vehicles may not work or could cause issues. Check with Metra support for any updates on compatibility.

USER MANUAL AXSSO-FD2 Axxess

Three black electronic components with colored wires, no visible text or symbols

Ford Stop/Start Override Interface 2019-Up

INTERFACE FEATURES

• Allows the override of the STOP/START engine feature
  • The factory STOP/START button can resume the STOP/START feature
• Can be used with either a factory or aftermarket radio
• Vehicle type configured through the Axxess Updater software program
• Simple plug n' play installation, no wiring required

INTRODUCTION

The AXSSO-FD2 is designed to disengage the STOP/START feature of the vehicle and keep that feature disengaged, even after the key has been cycled. The AXSSO-FD2 will work with either an aftermarket radio or a factory radio. A simple plug n' play installation is all that is required to install the device in the vehicle. Programming will be enabled through a Windows 10 computer via the Axxess Updater software program.

APPLICATIONS

Ford

Bronco Sport 2021

Escape 2020-2021

Explorer 2020-2021

Ranger 2019-2021

Transit 2020-2021

Transit Connect 2019-2021

Product Info

TABLE OF CONTENTS

Programming 2

Connections 3

Operation 4

INTERFACE COMPONENTS

• AXSSO-FD2 interface
• AXSSO-FD2 harness

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Zip ties • Cutters (for zip ties)
• USB Micro-B cable

(Axxess part number AXUSB-MCBL)

ATTENTION: With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product. NOTE: Refer to the instructions included with the aftermarket radio.

PROGRAMMING

(Figure A) (Figure B) (Figure C)

1.

Download and install the Axxess Updater software program from: axxessinterfaces.com/resources/updater-software

3.

On the next screen that opens, select the year, make, and model of the vehicle, then press Program Interface. (Figure B)

2.

Connect the micro-B USB cable (sold separately) to the computer and AXSS0-FD2 interface. Open the Axxess Updater software program and wait until the word Ready is shown in the bottom left of the screen. Select Stop / Start. (Figure A)

4.

When the Configuration Successful box pops up, the programming process is complete. (Figure C)

Continue to Installation

INSTALLATION

These vehicles will connect at the OBD2 connector, located under the driver's side dashboard:

Ford

Bronco Sport ......2021

Escape 2020-2021

Explorer 2020-2021

Ranger 2019-2021

Transit 2020-2021

Transit Connect ......2019-2021

From the OBD2 connector in the dash:

1. Disconnect the factory OBD2 connector from under the dash. (Figure A)
2. Plug the AXSSO-FD2 harness into the OBD2 connector.
3. Connect the AXSSO-FD2 to the wiring harness harness in the dash.
4. Plug the AXSSO-FD2 harness into the AXSSO-FD2 interface.
5. Zip tie the harness securely under the dash to avoid it from sagging. (Figure B)

Close-up of a mechanical component with blue and yellow connectors, showing a close-up inset (no text or symbols visible)

(Figure A)

(Figure B)

OPERATION

Re-engaging the STOP/START feature

1.

Press the factory STOP/START button to re-engage the STOP/START feature.

Having difficulties? We're here to help.

Contact our Tech Support line at: 1-386-257-1187

Or via email at: [e-mail]

Tech Support Hours (Eastern Standard Time)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 7:00 PM

Sunday: 10:00 AM - 4:00 PM

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians